>>>Всем привет! Помогите пожалуйста новичку настроить radiusclient-ng >>>При попытке запуска пишет >>>[root@test sbin]# ./radiusclient /usr/local/etc/radiusclient-ng/radiusclient.conf >>>/usr/local/etc/radiusclient-ng/radiusclient.conf: can't parse AV pair >> >>смею предположить либо нет прав на файлик конфигурации, либо файл конфигурации содержит >> ошибки. >> >Права есть, вот сам radiusclient.conf ># General settings > ># specify which authentication comes first respectively which ># authentication is used. possible values are: "radius" and "local". ># if you specify "radius,local" then the RADIUS server is asked ># first then the local one. if only one keyword is specified >only ># this server is asked. >#auth_order radius,local > ># maximum login tries a user has >login_tries 4 > ># timeout for all login tries ># if this time is exceeded the user is kicked out >login_timeout 60 > ># name of the nologin file which when it exists disables logins. > ># it may be extended by the ttyname which will result in > ># a terminal specific lock (e.g. /etc/nologin.ttyS2 will disable ># logins on /dev/ttyS2) >nologin /etc/nologin > ># name of the issue file. it's only display when no username >is passed ># on the radlogin command line >issue /usr/local/etc/radiusclient-ng/issue > ># RADIUS settings > ># RADIUS server to use for authentication requests. this config ># item can appear more then one time. if multiple servers are > ># defined they are tried in a round robin fashion if one > ># server is not answering. ># optionally you can specify a the port number on which is >remote ># RADIUS listens separated by a colon from the hostname. if ># no port is specified /etc/services is consulted of the radius ># service. if this fails also a compiled in default is used. > >authserver 192.168.110.4:1812 > ># RADIUS server to use for accouting requests. All that I ># said for authserver applies, too. ># >acctserver 192.168.110.4:1813 > ># file holding shared secrets used for the communication ># between the RADIUS client and server >servers /usr/local/etc/radiusclient-ng/servers > ># dictionary of allowed attributes and values ># just like in the normal RADIUS distributions >dictionary /usr/local/etc/radiusclient-ng/dictionary > ># program to call for a RADIUS authenticated login >login_radius /usr/local/sbin/login.radius > ># file which holds sequence number for communication with the ># RADIUS server >seqfile /var/run/radius.seq > ># file which specifies mapping between ttyname and NAS-Port attribute >mapfile /usr/local/etc/radiusclient-ng/port-id-map > ># default authentication realm to append to all usernames if no ># realm was explicitly specified by the user ># the radiusd directly form Livingston doesnt use any realms, so leave > ># it blank then >default_realm > ># time to wait for a reply from the RADIUS server >radius_timeout 10 > ># resend request this many times before trying the next server >radius_retries 3 ># local address from which radius packets have to be sent >bindaddr 192.168.110.50 > ># LOCAL settings > ># program to execute for local login ># it must support the -f flag for preauthenticated login >login_local /bin/login >Насчёт ошибки, возможно и есть, подскажи плииз, как это дело побороть >Ни у кого нет никаких мыслей?
|