Люди, помогите!
Машина:
Cisco IOS Software, 5400 Software (C5400-JS-M), Version 12.4(7a), RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Tue 25-Apr-06 02:37 by ssearchROM: System Bootstrap, Version 12.2(1r)1, RELEASE SOFTWARE (fc1)
Komtel_54 uptime is 3 weeks, 18 hours, 15 minutes
System returned to ROM by reload at 19:53:00 gmt Thu Jan 3 2008
System restarted at 19:56:26 gmt Thu Jan 3 2008
System image file is "flash:c5400-js-mz.124-7a.bin"
Cisco AS5400 (R7K) processor (revision T) with 524288K/65536K bytes of memory.
Processor board ID JAE063407PU
R7000 CPU at 250MHz, Implementation 39, Rev 1.0, 256KB L2, 2048KB L3 Cache
Last reset from warm-reset
Manufacture Cookie Info:
EEPROM Type 0x0001, EEPROM Version 0x01, Board ID 0x31,
Board Hardware Version 3.33, Item Number 800-5171-02,
Board Revision B0, Serial Number JAE063407PU,
PLD/ISP Version 2.2, Manufacture Date 25-Aug-2002.
Processor 0x14, MAC Address 0009.e818.4a14
Backplane HW Revision 1.0, Flash Type 5V
2 FastEthernet interfaces
161 Serial interfaces
276 terminal lines
8 Channelized E1/PRI ports
512K bytes of NVRAM.
65536K bytes of processor board System flash (Read/Write)
8192K bytes of processor board Boot flash (Read/Write)
И вот что при попытке поднять ssh:
Komtel_54#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Komtel_54(config)#cr?
% Unrecognized command
Может такое быть, что не поддерживается ssh? Или что-то где-то включить нужно?
Спасибо!
