Исходное сообщение
"CBWFQ + trunk" Отправлено teebot, 20-Июл-06 12:40
>2811 Fa0/0 ----trunk----Fa0/1 3560 > > >2811 >! >interface FastEthernet0/0 >  no ip address > no ip proxy-arp > ip accounting output-packets > duplex auto > speed auto >! >interface FastEthernet0/0.1 > encapsulation dot1Q 10 > ip address 10.10.1.1 255.255.255.0 > no snmp trap link-status >! >interface FastEthernet0/0.2 > description voice > encapsulation dot1Q 20 > ip address 192.168.1.1 255.255.255.0 > no snmp trap link-status >! > > > >3560 >! >interface FastEthernet0/1 > switchport trunk encapsulation dot1q > switchport mode trunk >........... >interface FastEthernet0/4 > switchport access vlan 10 > switchport mode dynamic desirable > switchport voice vlan 20 > switchport priority extend trust > mls qos trust cos > spanning-tree portfast >! >interface FastEthernet0/5 > switchport access vlan 10 > switchport mode dynamic desirable > switchport voice vlan 20 > switchport priority extend trust > mls qos trust cos > spanning-tree portfast >! >........... > > >оно? дык? а где CBWFQ на интерфейсе 2811 interface FastEthernet0/0??? где class-map и policy-map. я могу ошибаться в данном случае мі имеет просто транк с FIFO