Исходное сообщение
"Помогите прошить Cisco ata 186!!!" Отправлено seducer, 03-Дек-07 11:31
>>>не получилось, пишет вроде всё ок, а прошивку не заливает >> >>В конфиге АТы стоит "useTFTF = 1" > >да. Под рукой нету счас ATы с sip прошивкой,поэтому про upgradecode точнее ничего сказать не могу: Process Whenever the Cisco ATA administrator stores a new signaling image (denoted by a change to the image_id), the Cisco ATA upgrades its firmware with the new image_file. To contact the TFTP server, the Cisco ATA uses the TFTP server IP address that is contained within the value of the upgradecode parameter. Example The upgradecode parameter value could be: upgradecode:3,0x301,0x0400,0x0200,192.168.2.170,69,0x020723a,ata186-v2-15-020723a.zup This instructs the Cisco ATA to upgrade its firmware to ata186-v2-15-020723a.zup by downloading the ata186-v2-15-020723a.zup file from the TFTP server IP address of 192.168.2.170. This download occurs after the Cisco ATA downloads its configuration file that contains the directive from the upgradecode parameter. Also, the upgrade occurs only if the internally cached image_id in Cisco ATA is different from the value 0x020723a. Из этого дока http://www.cisco.com/en/US/docs/voice_ip_comm/cata/186_188/2...