>что-то я запутался во всех этих интерфейсах :)
>у вас input errors на интерфейсе роутера?? а на интерфейсе свича что
>творится (sh run int, sh int)? да на интерфейсе роутера ошибки..
на интерфейсе свитча всё в порядке.. проблем нету...
сторона на свитче
sho int fa0/1
FastEthernet0/1 is up, line protocol is up (connected)
Hardware is Fast Ethernet, address is 000d.ede8.b941 (bia 000d.ede8.b941)
Description: 123
MTU 1500 bytes, BW 100000 Kbit, DLY 1000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Full-duplex, 100Mb/s, media type is 100BaseTX
input flow-control is unsupported output flow-control is unsupported
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:00:09, output 00:00:00, output hang never
Last clearing of "show interface" counters 2d16h
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 332000 bits/sec, 121 packets/sec
5 minute output rate 402000 bits/sec, 349 packets/sec
20356603 packets input, 920283885 bytes, 0 no buffer
Received 166653 broadcasts (0 multicast)
0 runts, 0 giants, 0 throttles
1 input errors, 1 CRC, 0 frame, 0 overrun, 0 ignored
0 watchdog, 166057 multicast, 0 pause input
0 input packets with dribble condition detected
44225227 packets output, 2883300513 bytes, 0 underruns
0 output errors, 1 collisions, 0 interface resets
0 babbles, 0 late collision, 5 deferred
0 lost carrier, 0 no carrier, 0 PAUSE output
0 output buffer failures, 0 output buffers swapped out
sho run int fa0/1
Building configuration...
Current configuration : 106 bytes
!
interface FastEthernet0/1
description 123
switchport mode trunk
speed 100
duplex full
end
