Исходное сообщение
"Сбор статистики по SNMP с Comtrend CT-320" Отправлено Аноним, 06-Окт-09 10:39
зашел на модем через телнет включил снмп начал ставить мртж по статье http://www.lissyara.su/?id=1296 и при попытке сгенерить конфиг получаю в шею в доке на модем нифига не понял [root@genesis /home/ss25]# cfgmaker public@10.100.100.73 > mrtg.cfg SNMP Error: no response received SNMPv1_Session (remote host: "10.100.100.73" [10.100.100.73].161)                   community: "public"                  request ID: 665183408                 PDU bufsize: 8000 bytes                     timeout: 2s                     retries: 5                     backoff: 1) at /usr/local/lib/perl5/site_perl/5.8.9/SNMP_util.pm line 629 SNMPWALK Problem for 1.3.6.1.2.1.1 on public@10.100.100.73::::::v4only at /usr/local/bin/cfgmaker line 950 WARNING: Skipping public@10.100.100.73: as no info could be retrieved из доки на модем Chapter 8 SNMP The modem supports SNMP (Simple Network Management Protocol) management. This chapter describes how to set the SNMP community [Section 8.1], and trap destinations [Section 8.2]. 8.1 Community Step 1: Enter MAIN/CONF/SNMP/COMMUNITY menu. Step 2: Enter a parameter in each field. The default settings for read-only read-write communities are public and private. Read-Only Community: Enter the password for read-only access (default: Public) Read-Write Community: Enter the password for read-write access (default: Private) Step 3: Hold down the Ctrl-S keys. 8.2 Trap Destinations Up to five trap destinations are available in the system. 8.2.1 Add Trap Destination Entry Step 1: Enter the MAIN/CONF/SNMP/TRAP/ADD menu Step 2: Enter a parameter in the following fields Version: Version 1/Version 2 Destination IP: Enter the destination IP address Community: Enter a parameter for the community Step 3: Hold down the Ctrl-S keys 8.2.2 Delete Trap Destination Entry Step 1: Enter the MAIN/CONF/SNMP/TRAP menu Step 2: Enter the following parameters Version: Version 1/Version 2 Destination IP: Enter the destination IP address Community: Enter the parameter for the community Step 3: Hold down the Ctrl-S keys to delete the trap destination entry. 8.2.3 List Trap Destination Entries To list the trap destination entries, access the MAIN/CONF/SNMP/TRAP/LIST menu.