Исходное сообщение
"помогите с ядром" Отправлено bcat, 02-Дек-05 16:55
>  Покажи, что находится в файле /var/run/dmesg.boot при нормальной загрузке системы. >Будем знать хотя бы что у тебя стоит Пожалуйста -su-2.05b# less dmesg.boot Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994         The Regents of the University of California. All rights reserved. FreeBSD 4.8-RELEASE #0: Thu Apr  3 10:53:38 GMT 2003     root@freebsd-stable.sentex.ca:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254"  frequency 1193182 Hz CPU: Intel(R) Xeon(TM) CPU 1.80GHz (1794.19-MHz 686-class CPU)   Origin = "GenuineIntel"  Id = 0xf27  Stepping = 7   Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,S SE2,SS,HTT,TM,PBE>   Hyperthreading: 2 logical CPUs real memory  = 1073217536 (1048064K bytes) avail memory = 1039290368 (1014932K bytes) Preloaded elf kernel "kernel.GENERIC" at 0xc051d000. Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 17 entries at 0xc00fdeb0 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pci0: <unknown card> (vendor=0x8086, dev=0x2541) at 0.1 pcib1: <PCI to PCI bridge (vendor=8086 device=2543)> at device 2.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <unknown card> (vendor=0x8086, dev=0x1461) at 28.0 pcib2: <PCI to PCI bridge (vendor=8086 device=1460)> at device 29.0 on pci1 pci2: <PCI bus> on pcib2 mpt0: <LSILogic 1030 Ultra4 Adapter> port 0x8000-0x80ff mem 0xfc200000-0xfc20ffff,0xfc210000-0xfc21ffff irq 11 at device 2.0 on pci2 pci1: <unknown card> (vendor=0x8086, dev=0x1461) at 30.0 pcib3: <PCI to PCI bridge (vendor=8086 device=1460)> at device 31.0 on pci1 pci3: <PCI bus> on pcib3 uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x7000-0x701f irq 10 at device 29.0 on pci0 usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x7020-0x703f irq 5 at device 29.1 on pci0 usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered pcib4: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0

Ваше сообщение
Имя*:
EMail:	Для отправки новых сообщений в текущей нити на email укажите знак ! перед адресом, например, !user@host.ru (!! - не показывать email). Более тонкая настройка отправки ответов производится в профиле зарегистрированного участника форума.
Заголовок*:
Сообщение*:	>> Покажи, что находится в файле /var/run/dmesg.boot при нормальной загрузке системы. >>Будем знать хотя бы что у тебя стоит > Пожалуйста > -su-2.05b# less dmesg.boot > Copyright (c) 1992-2003 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the > University of California. All rights reserved. > FreeBSD 4.8-RELEASE #0: Thu Apr 3 10:53:38 GMT 2003 > root@freebsd-stable.sentex.ca:/usr/obj/usr/src/sys/GENERIC > Timecounter "i8254" frequency 1193182 Hz > CPU: Intel(R) Xeon(TM) CPU 1.80GHz (1794.19-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0xf27 Stepping = > 7 > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,S > SE2,SS,HTT,TM,PBE> > Hyperthreading: 2 logical CPUs > real memory = 1073217536 (1048064K bytes) > avail memory = 1039290368 (1014932K bytes) > Preloaded elf kernel "kernel.GENERIC" at 0xc051d000. > Pentium Pro MTRR support enabled > md0: Malloc disk > Using $PIR table, 17 entries at 0xc00fdeb0 > npx0: <math processor> on motherboard > npx0: INT 16 interface > pcib0: <Host to PCI bridge> on motherboard > pci0: <PCI bus> on pcib0 > pci0: <unknown card> (vendor=0x8086, dev=0x2541) at 0.1 > pcib1: <PCI to PCI bridge (vendor=8086 device=2543)> at device 2.0 on pci0 > pci1: <PCI bus> on pcib1 > pci1: <unknown card> (vendor=0x8086, dev=0x1461) at 28.0 > pcib2: <PCI to PCI bridge (vendor=8086 device=1460)> at device 29.0 on pci1 > pci2: <PCI bus> on pcib2 > mpt0: <LSILogic 1030 Ultra4 Adapter> port 0x8000-0x80ff mem 0xfc200000-0xfc20ffff,0xfc210000-0xfc21ffff > irq 11 at device 2.0 > on pci2 > pci1: <unknown card> (vendor=0x8086, dev=0x1461) at 30.0 > pcib3: <PCI to PCI bridge (vendor=8086 device=1460)> at device 31.0 on pci1 > pci3: <PCI bus> on pcib3 > uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x7000-0x701f irq 10 at > device 29.0 on pci0 > usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0 > usb0: USB revision 1.0 > uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x7020-0x703f irq 5 at > device 29.1 on pci0 > usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1 > usb1: USB revision 1.0 > uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub1: 2 ports with 2 removable, self powered > pcib4: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on > pci0
	Введите код, изображенный на картинке: