>а сетевухи где? где винчестеры? ;) Вот вывод dmesg
-su-2.05b# dmesg
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.8-RELEASE #0: Thu Apr 3 10:53:38 GMT 2003
root@freebsd-stable.sentex.ca:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: Intel(R) Xeon(TM) CPU 1.80GHz (1794.19-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf27 Stepping = 7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory = 1073217536 (1048064K bytes)
avail memory = 1039290368 (1014932K bytes)
Preloaded elf kernel "kernel.GENERIC" at 0xc051d000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 17 entries at 0xc00fdeb0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pci0: <unknown card> (vendor=0x8086, dev=0x2541) at 0.1
pcib1: <PCI to PCI bridge (vendor=8086 device=2543)> at device 2.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <unknown card> (vendor=0x8086, dev=0x1461) at 28.0
pcib2: <PCI to PCI bridge (vendor=8086 device=1460)> at device 29.0 on pci1
pci2: <PCI bus> on pcib2
mpt0: <LSILogic 1030 Ultra4 Adapter> port 0x8000-0x80ff mem 0xfc200000-0xfc20ffff,0xfc210000-0xfc21ffff irq 11 at device 2.0 on pci2
pci1: <unknown card> (vendor=0x8086, dev=0x1461) at 30.0
pcib3: <PCI to PCI bridge (vendor=8086 device=1460)> at device 31.0 on pci1
pci3: <PCI bus> on pcib3
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x7000-0x701f irq 10 at device 29.0 on pci0
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x7020-0x703f irq 5 at device 29.1 on pci0
usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pcib4: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0
pci4: <PCI bus> on pcib4
pci4: <ATI Mach64-GR graphics accelerator> at 3.0 irq 11
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x9400-0x943f mem 0xfc300000-0xfc31ffff,0xfc361000-0xfc361fff irq 11 at device 4.0 on pci4
fxp0: Ethernet address 00:02:b3:af:cb:f8
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0x9440-0x947f mem 0xfc320000-0xfc33ffff,0xfc362000-0xfc362fff irq 11 at device 5.0 on pci4
fxp1: Ethernet address 00:02:b3:af:cb:98
inphy1: <i82555 10/100 media interface> on miibus1
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
atapci0: <Promise ATA100 controller> port 0x9480-0x94bf,0x94c0-0x94c3,0x94c8-0x94cf,0x94c4-0x94c7,0x94d0-0x94d7 mem 0xfc340000-0xfc35ffff irq 12 at device 6.0 on pci4
ata2: at 0x94d0 on atapci0
ata3: at 0x94c8 on atapci0
isab0: <PCI to ISA bridge (vendor=8086 device=2480)> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH3 ATA100 controller> port 0x7040-0x704f,0-0x3,0-0x7,0-0x3,0-0x7 irq 0 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci1
ata1: at 0x170 irq 15 on atapci1
pci0: <unknown card> (vendor=0x8086, dev=0x2483) at 31.3 irq 11
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff,0xe3800-0xe3fff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
acd0: CDROM <TEAC CD-552E> at ata1-master PIO4
Waiting 15 seconds for SCSI devices to settle
Mounting root from ufs:/dev/da0s1a
da0 at mpt0 bus 0 target 0 lun 0
da0: <SEAGATE ST336607LW 0005> Fixed Direct Access SCSI-3 device
da0: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da0: 35003MB (71687372 512 byte sectors: 255H 63S/T 4462C)
da3 at mpt0 bus 0 target 3 lun 0
da3: <SEAGATE ST336607LW 0005> Fixed Direct Access SCSI-3 device
da3: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da3: 35003MB (71687372 512 byte sectors: 255H 63S/T 4462C)
da2 at mpt0 bus 0 target 2 lun 0
da2: <SEAGATE ST336607LW 0005> Fixed Direct Access SCSI-3 device
da2: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da2: 35003MB (71687372 512 byte sectors: 255H 63S/T 4462C)
da1 at mpt0 bus 0 target 1 lun 0
da1: <SEAGATE ST336607LW 0005> Fixed Direct Access SCSI-3 device
da1: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da1: 35003MB (71687372 512 byte sectors: 255H 63S/T 4462C)
IP packet filtering initialized, divert disabled, rule-based forwarding enabled, default to deny, logging disabled
ip_fw_ctl: invalid command
