>Пробовал и такой вариант который лежит на самом сайте телекома:
>default:
> set log PHASE LCP Warning Error Alert
>pppoe:
> set device PPPoE:fxp0:ukrtelecom
> enable lqr
> enable dns
> set cd 10
> set dial
> set login
> set redial 0 0
> nat enable yes
> nat same_ports yes
> nat use_sockets yes
> add default HISADDR
> set authname YOURLOGINNAME
> set authkey YOURPASSWORD
>потом
>ppp -ddial pppoe
>Но начинает ругаться на 2 строчки:
>set log PHASE LCP Warning Error Alert
>set device PPPoE:sk0:ukrtelecom
>Пробовалы варианты которые есть на это сайте но и они не помогли
>:-(
>Постоянно ругается на
>set device PPPoE:fxp0:ukrtelecom
>Как же быть подскажите пожалуйста!!!
сразу не обратил внимание:
LOGGING FACILITY
ppp is able to generate the following log info either via syslog(3) or
directly to the screen:
All Enable all logging facilities. This generates a lot of
log. The most common use of 'all' is as a basis, where you
remove some facilities after enabling 'all' ('debug' and
'timer' are usually best disabled.)
Async Dump async level packet in hex.
CBCP Generate CBCP (CallBack Control Protocol) logs.
CCP Generate a CCP packet trace.
Chat Generate `dial', `login', `logout' and `hangup' chat script
trace logs.
Command Log commands executed either from the command line or any
of the configuration files.
Connect Log Chat lines containing the string "CONNECT".
Debug Log debug information.
DNS Log DNS QUERY packets.
Filter Log packets permitted by the dial filter and denied by any
filter.
HDLC Dump HDLC packet in hex.
ID0 Log all function calls specifically made as user id 0.
IPCP Generate an IPCP packet trace.
LCP Generate an LCP packet trace.
LQM Generate LQR reports.
Phase Phase transition log output.
Physical Dump physical level packet in hex.
Radius Dump RADIUS information. RADIUS information resulting from
the link coming up or down is logged at ``Phase'' level
unless ``Radius'' logging is enabled. This log level is
most useful for monitoring RADIUS alive information.
Sync Dump sync level packet in hex.
TCP/IP Dump all TCP/IP packets.
Timer Log timer manipulation.
TUN Include the tun device on each log line.
Warning Output to the terminal device. If there is currently no
terminal, output is sent to the log file using syslogs
LOG_WARNING.
Error Output to both the terminal device and the log file using
syslogs LOG_ERROR.
Alert Output to the log file using LOG_ALERT.
