в sasc-ng sof*tC*am b*i**s*s должен быть такого вида; Constant CW
;
; X YYYY freqol:src:sid <32 characters>
;
; YYYY - CA system id e.g. 0100
; freq - transponder frequence
; pol - polarization (v/h/r/l)
; src - sat source
; sid - service ID
;
; example:
X 2600 3645:h:S90E:17 00000000000000000000000000000000
два раза по 16 одно и тоже, но. ни VLC, ни Koffeine не видят скремблированных, sasc-ng выдает примерно одно и тоже в обоих случаях :
[root@localhost trunk]# ./sasc-ng -j 0:1 --cam-budget
May 16 14:49:14.460 : Version: 0.0.2-182M/117
May 16 14:49:14.461 CAM: initializing plugin: SoftCam (0.8.6-): A software emulated CAM
May 16 14:49:14.462 CAM(general.info): SC version 0.8.6- initializing
May 16 14:49:14.462 CAM: starting plugin:
May 16 14:49:14.462 CAM(general.info): SC version 0.8.6- starting
May 16 14:49:14.462 CAM(core.load): ** Plugin config:
May 16 14:49:14.462 CAM(core.load): ** Key updates (AU) are enabled (active CAIDs) (no prestart)
May 16 14:49:14.462 CAM(core.load): ** Local systems DON'T take priority over cached remote
May 16 14:49:14.463 CAM(core.load): ** Concurrent FF recordings are NOT allowed
May 16 14:49:14.463 CAM(core.load): ** Force transfermode with digital audio
May 16 14:49:14.463 CAM(core.load): ** ScCaps are 1 2 0 0 0 0 0 0 0 0
May 16 14:49:14.463 CAM(core.load): ** Ignored CAIDs 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
May 16 14:49:14.463 CAM(general.info): loading keys from ./sc_files/SoftCam.Key
May 16 14:49:14.464 CAM(core.load): loaded 1 keys from ./sc_files/SoftCam.Key
May 16 14:49:14.464 CAM(core.load): ** registered systems:
May 16 14:49:14.464 CAM(core.load): ** Cardclient (pri -15)
May 16 14:49:14.464 CAM(core.load): ** Conax (pri -10)
May 16 14:49:14.464 CAM(core.load): ** ConstCW (pri -20)
May 16 14:49:14.465 CAM(core.load): ** Cryptoworks (pri -10)
May 16 14:49:14.465 CAM(core.load): ** Irdeto (pri -10)
May 16 14:49:14.465 CAM(core.load): ** Nagra (pri -10)
May 16 14:49:14.465 CAM(core.load): ** Nagra2 (pri -10)
May 16 14:49:14.465 CAM(core.load): ** SC-Conax (pri -5)
May 16 14:49:14.465 CAM(core.load): ** SC-Cryptoworks (pri -5)
May 16 14:49:14.466 CAM(core.load): ** SC-Irdeto (pri -5)
May 16 14:49:14.466 CAM(core.load): ** SC-Nagra (pri -5)
May 16 14:49:14.466 CAM(core.load): ** SC-Seca (pri -5)
May 16 14:49:14.466 CAM(core.load): ** SC-Viaccess (pri -5)
May 16 14:49:14.466 CAM(core.load): ** SC-VideoGuard2 (pri -5)
May 16 14:49:14.466 CAM(core.load): ** Seca (pri -10)
May 16 14:49:14.467 CAM(core.load): ** @SHL (pri -10)
May 16 14:49:14.467 CAM(core.load): ** Viaccess (pri -10)
May 16 14:49:14.467 CAM(general.info): loading cardclient config from ./sc_files/cardclient.conf
May 16 14:49:14.467 CAM(cardclient.core): created 0 client(s)
May 16 14:49:14.467 CAM(core.load): loaded 0 Irdeto cards from ./sc_files/Ird-Beta.KID
May 16 14:49:14.468 CAM(core.load): loaded 0 Seca cards from ./sc_files/Seca.KID
May 16 14:49:14.468 CAM(core.load): loaded 0 Viaccess cards from ./sc_files/Viaccess.KID
May 16 14:49:14.468 CAM(general.info): loading ca cache from ./sc_files/ca.cache
May 16 14:49:14.468 CAM(general.warn): no smartcard interface defined!
May 16 14:49:15.470 frontend: Starting thread on /dev/dvb/adapter1/frontend1
The thread scheduling parameters indicate:
policy = 0
priority = 0
May 16 14:49:15.474 demux: Starting thread on /dev/dvb/adapter1/demux1
The thread scheduling parameters indicate:
policy = 0
priority = 0
May 16 14:49:15.534 dvr: Starting thread on /dev/dvb/adapter1/dvr1
The thread scheduling parameters indicate:
policy = 1
priority = 99
May 16 14:49:15.535 : Listening on port 5456
May 16 14:49:22.182 CSA: Got command(1): I idx: 0 pid: 0
May 16 14:49:24.627 CHANNEL: Clearing tuning cache due to switch cmd
May 16 14:49:24.628 CHANNEL: Clearing tuning cache due to switch cmd
May 16 14:49:24.775 CHANNEL: Clearing tuning cache due to switch cmd
May 16 14:49:24.859 CHANNEL: Clearing tuning cache due to switch cmd
May 16 14:49:24.879 CHANNEL: Clearing tuning cache due to switch cmd
May 16 14:49:24.883 CHANNEL: Tuning frontend
May 16 14:49:24.884 CSA: Got command(1): I idx: 0 pid: 0
May 16 14:49:25.278 CHANNEL: start: read pes returned err: 11
start: read pes returned: Resource temporarily unavailable
May 16 14:49:26.292 CAM(core.pids): 0: now tuned to source 8000 transponder 11
May 16 14:49:26.292 CAM: SC completed Tune cmd
May 16 14:49:26.292 CAM(core.pids): 0: update SID 17 (zero=0 noshift=0)
May 16 14:49:26.292 CAM(core.pids): 0: pids typ5=02bd typ5=02be
May 16 14:49:26.293 CAM(core.pids): 0: SID=17 zero=0 | sid=-/-/- zero=-/-/- idle=-/-/-
May 16 14:49:26.293 CAM(core.pids): 0: found handler for SID 17 (0.1 idle=1 idx=1)
May 16 14:49:26.293 CAM(core.ecm): 0.1: setting new SID 17
May 16 14:49:26.293 CAM(core.pids): 0.1: pids on entry
May 16 14:49:26.293 CAM(core.pids): 0.1: pids after delete
May 16 14:49:26.293 CAM(core.pids): 0: descrambling pid 02bd on index 1
Called cSascDvbDevice::SetCaPid
May 16 14:49:26.294 CSA: Got command(1): P idx: 1 pid: 701
May 16 14:49:26.294 CAM(core.pids): 0: descrambling pid 02be on index 1
Called cSascDvbDevice::SetCaPid
May 16 14:49:26.294 CSA: Got command(1): P idx: 1 pid: 702
May 16 14:49:26.294 CAM(core.pids): 0.1: pids after add typ5=02bd typ5=02be
May 16 14:49:26.295 CAM(core.ecm): 0.1: is no longer idle
May 16 14:49:26.296 MSG: Got unprocessed message type: 1
May 16 14:49:26.358 CAM(core.ecm): 0.1: triggered SID -1/17 idx -1/1 mode -1/0 -
called cSascDvbDevice::GetPrgCaids
May 16 14:49:26.360 CAM(core.ecm): 0.1: got CaDescriptors for SID 17 (len=6)
May 16 14:49:26.360 CAM(core.ecm): 0.1: descriptor 26 00 ff ff
May 16 14:49:26.360 CAM(core.ecm): 0.1: found 2600 (ConstCW) id 0000 with ecm 1fff (new)
May 16 14:49:26.361 CAM(core.ecm): 0.1: try system ConstCW (2600) id 0000 with ecm 1fff (pri=-20)
May 16 14:49:26.600 CAM(core.ecm): system: no key found for X 2600 0:
called cSascDvbDevice::GetPrgCaids
Kaffeine вещает конкретно выбранные каналы(примерно там - настройка DVB -> трансляция) по udp порту на один адрес(тоже где-то в менюшках найди) укажи ему 127.0.0.1 ! Выбери свой закриптованый канал (кстати кнопку Цифровое ТВ в главном окне не нужно давить)
Ну а дальше уже понятно vlc -vvv rtp://127.0.0.1:1234 -- programs и так далее
Заморочено - но работает, комп не грузит. Лучше бы конечно через sasc, что б с kaffeine не связываться, но увы. Может кто-то поборол? Кто с Ямала 201 вещает? пишите.
