Исходное сообщение
"Kernel panic during file copy..." Отправлено Lys, 25-Дек-08 21:13
Доброго времени суток! Имеется машинка с FreeBSD 7.1 RC2, работающая в сети. Работает стабильно, пока дело не доходит до копирования ряда файлов(чем больше файлы и чем больше их, тем вероятнее появление ошибки). В этом случае на определенном этапе вылетает следующее сообщение и система виснет. После этого только ресет по черному помогает возобновить работу. В результате, после этого fsck при загрузке находит кучу ошибок, но загрузка проходит нормально. panic: vm_page_insert: page already inserted (root) ON ttyv1 cpuid = 1 Sleeping thread (tid 100069, pid 999) owns a non-sleepable lock panic: sleeping thread cpuid = 1 Не важно каким способом проходит копирование(smbd,ftp, комманда cp) ошибка повторяется при всех способах. Ядра с предыдущих версий(6.2, 6.4, 7.0) системы загружатся не хотели(как GENERIC с диска, так и вручную собранное). Сообщения ядра при загрузке (dmesg) Waiting (max 60 seconds) for system process `vnlru' to stop...done Waiting (max 60 seconds) for system process `bufdaemon' to stop...done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining...0 done All buffers synced. Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994     The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.1-RC2 #9: Wed Dec 24 21:41:19 EET 2008     root@lsd.chokolovka.net:/usr/obj/usr/src/sys/LSD Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) Dual  CPU  E2160  @ 1.80GHz (1800.02-MHz 686-class CPU)   Origin = "GenuineIntel"  Id = 0x6fd  Stepping = 13   Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>   Features2=0xe39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM>   AMD Features=0x20100000<NX,LM>   AMD Features2=0x1<LAHF>   Cores per package: 2 real memory  = 2146369536 (2046 MB) avail memory = 2094977024 (1997 MB) ACPI APIC Table: <Nvidia ASUSACPI> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID:  0 cpu1 (AP): APIC ID:  1 ioapic0: Changing APIC ID to 4 ioapic0 <Version 1.1> irqs 0-23 on motherboard kbd1 at kbdmux0 acpi0: <Nvidia ASUSACPI> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: reservation of 100000, 7fdf0000 (3) failed acpi0: reservation of 0, a0000 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <memory, RAM> at device 0.1 (no driver attached) pci0: <memory, RAM> at device 1.0 (no driver attached) pci0: <memory, RAM> at device 1.1 (no driver attached) pci0: <memory, RAM> at device 1.2 (no driver attached) pci0: <memory, RAM> at device 1.3 (no driver attached) pci0: <memory, RAM> at device 1.4 (no driver attached) pci0: <memory, RAM> at device 1.5 (no driver attached) pci0: <memory, RAM> at device 1.6 (no driver attached) pci0: <memory, RAM> at device 2.0 (no driver attached) isab0: <PCI-ISA bridge> at device 3.0 on pci0 isa0: <ISA bus> on isab0 pci0: <serial bus, SMBus> at device 3.1 (no driver attached) pci0: <memory, RAM> at device 3.2 (no driver attached) pci0: <memory, RAM> at device 3.4 (no driver attached) ohci0: <OHCI (generic) USB controller> mem 0xeffff000-0xefffffff irq 21 at device 4.0 on pci0 ohci0: [GIANT-LOCKED] ohci0: [ITHREAD] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 8 ports with 8 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xefffe000-0xefffe0ff irq 22 at device 4.1 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb1: EHCI version 1.0 usb1: companion controller, 10 ports each: usb0 usb1: <EHCI (generic) USB 2.0 controller> on ehci0 usb1: USB revision 2.0 uhub1: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb1 uhub1: 8 ports with 8 removable, self powered atapci0: <nVidia nForce MCP73 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 8.0 on pci0 ata0: <ATA channel 0> on atapci0 ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 ata1: [ITHREAD] pci0: <multimedia> at device 9.0 (no driver attached) pcib1: <ACPI PCI-PCI bridge> at device 10.0 on pci0 pci1: <ACPI PCI bus> on pcib1 rl0: <RealTek 8139 10/100BaseTX> port 0xac00-0xacff mem 0xefbff000-0xefbff0ff irq 18 at device 6.0 on pci1 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> PHY 0 on miibus0 rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: Ethernet address: 00:50:fc:ae:11:24 rl0: [ITHREAD] rl1: <RealTek 8139 10/100BaseTX> port 0xa800-0xa8ff mem 0xefbfe000-0xefbfe0ff irq 19 at device 7.0 on pci1 miibus1: <MII bus> on rl1 rlphy1: <RealTek internal media interface> PHY 0 on miibus1 rlphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl1: Ethernet address: 00:30:4f:14:5a:e4 rl1: [ITHREAD] pcib2: <ACPI PCI-PCI bridge> at device 11.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> at device 12.0 on pci0 pci3: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> at device 13.0 on pci0 pci4: <ACPI PCI bus> on pcib4 atapci1: <nVidia ATA controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xdc00-0xdc0f mem 0xefff8000-0xefff9fff irq 20 at device 14.0 on pci0 atapci1: [ITHREAD] ata2: <ATA channel 0> on atapci1 ata2: [ITHREAD] ata3: <ATA channel 1> on atapci1 ata3: [ITHREAD] nfe0: <NVIDIA nForce MCP73 Networking Adapter> port 0xd800-0xd807 mem 0xefffd000-0xefffdfff,0xefffc000-0xefffc0ff,0xefffb000-0xefffb00f irq 21 at device 15.0 on pci0 miibus2: <MII bus> on nfe0 rlphy2: <RTL8201L 10/100 media interface> PHY 1 on miibus2 rlphy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto nfe0: Ethernet address: 00:22:15:15:84:41 nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] vgapci0: <VGA-compatible display> mem 0xed000000-0xedffffff,0xd0000000-0xdfffffff,0xee000000-0xeeffffff irq 22 at device 16.0 on pci0 acpi_tz0: <Thermal Zone> on acpi0 fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FILTER] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] cpu0: <ACPI CPU> on acpi0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 928092806000928 device_attach: est0 attach returned 6 p4tcc0: <CPU Frequency Thermal Control> on cpu0 cpu1: <ACPI CPU> on acpi0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 928092806000928 device_attach: est1 attach returned 6 p4tcc1: <CPU Frequency Thermal Control> on cpu1 pmtimer0 on isa0 orm0: <ISA Option ROM> at iomem 0xd0000-0xd3fff pnpid ORM0000 on isa0 ppc0: parallel port not found. sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding sio0: [FILTER] sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 1.000 msec ipfw2 initialized, divert enabled, nat enabled, rule-based forwarding enabled, default to accept, logging unlimited ad0: 76319MB <WDC WD800JB-00JJC0 05.01C05> at ata0-master UDMA100 ad4: 953869MB <Seagate ST31000340AS SD15> at ata2-master UDMA33 SMP: AP CPU #1 Launched! Trying to mount root from ufs:/dev/ad0s1a rl0: link state changed to UP WARNING: /usr2 was not properly dismounted WARNING: attempt to net_add_domain(netgraph) after domainfinalize() panic: vm_page_insert: page already inserted cpuid = 1 Sleeping thread (tid 100069, pid 999) owns a non-sleepable lock panic: sleeping thread cpuid = 1 Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994     The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.1-RC2 #9: Wed Dec 24 21:41:19 EET 2008     root@lsd.chokolovka.net:/usr/obj/usr/src/sys/LSD Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) Dual  CPU  E2160  @ 1.80GHz (1800.02-MHz 686-class CPU)   Origin = "GenuineIntel"  Id = 0x6fd  Stepping = 13   Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>   Features2=0xe39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM>   AMD Features=0x20100000<NX,LM>   AMD Features2=0x1<LAHF>   Cores per package: 2 real memory  = 2146369536 (2046 MB) avail memory = 2094977024 (1997 MB) ACPI APIC Table: <Nvidia ASUSACPI> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID:  0 cpu1 (AP): APIC ID:  1 ioapic0: Changing APIC ID to 4 ioapic0 <Version 1.1> irqs 0-23 on motherboard kbd1 at kbdmux0 acpi0: <Nvidia ASUSACPI> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: reservation of 100000, 7fdf0000 (3) failed acpi0: reservation of 0, a0000 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <memory, RAM> at device 0.1 (no driver attached) pci0: <memory, RAM> at device 1.0 (no driver attached) pci0: <memory, RAM> at device 1.1 (no driver attached) pci0: <memory, RAM> at device 1.2 (no driver attached) pci0: <memory, RAM> at device 1.3 (no driver attached) pci0: <memory, RAM> at device 1.4 (no driver attached) pci0: <memory, RAM> at device 1.5 (no driver attached) pci0: <memory, RAM> at device 1.6 (no driver attached) pci0: <memory, RAM> at device 2.0 (no driver attached) isab0: <PCI-ISA bridge> at device 3.0 on pci0 isa0: <ISA bus> on isab0 pci0: <serial bus, SMBus> at device 3.1 (no driver attached) pci0: <memory, RAM> at device 3.2 (no driver attached) pci0: <memory, RAM> at device 3.4 (no driver attached) ohci0: <OHCI (generic) USB controller> mem 0xeffff000-0xefffffff irq 21 at device 4.0 on pci0 ohci0: [GIANT-LOCKED] ohci0: [ITHREAD] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 8 ports with 8 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xefffe000-0xefffe0ff irq 22 at device 4.1 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb1: EHCI version 1.0 usb1: companion controller, 10 ports each: usb0 usb1: <EHCI (generic) USB 2.0 controller> on ehci0 usb1: USB revision 2.0 uhub1: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb1 uhub1: 8 ports with 8 removable, self powered atapci0: <nVidia nForce MCP73 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 8.0 on pci0 ata0: <ATA channel 0> on atapci0 ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 ata1: [ITHREAD] pci0: <multimedia> at device 9.0 (no driver attached) pcib1: <ACPI PCI-PCI bridge> at device 10.0 on pci0 pci1: <ACPI PCI bus> on pcib1 rl0: <RealTek 8139 10/100BaseTX> port 0xac00-0xacff mem 0xefbff000-0xefbff0ff irq 18 at device 6.0 on pci1 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> PHY 0 on miibus0 rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: Ethernet address: 00:50:fc:ae:11:24 rl0: [ITHREAD] rl1: <RealTek 8139 10/100BaseTX> port 0xa800-0xa8ff mem 0xefbfe000-0xefbfe0ff irq 19 at device 7.0 on pci1 miibus1: <MII bus> on rl1 rlphy1: <RealTek internal media interface> PHY 0 on miibus1 rlphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl1: Ethernet address: 00:30:4f:14:5a:e4 rl1: [ITHREAD] pcib2: <ACPI PCI-PCI bridge> at device 11.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> at device 12.0 on pci0 pci3: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> at device 13.0 on pci0 pci4: <ACPI PCI bus> on pcib4 atapci1: <nVidia ATA controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xdc00-0xdc0f mem 0xefff8000-0xefff9fff irq 20 at device 14.0 on pci0 atapci1: [ITHREAD] ata2: <ATA channel 0> on atapci1 ata2: [ITHREAD] ata3: <ATA channel 1> on atapci1 ata3: [ITHREAD] nfe0: <NVIDIA nForce MCP73 Networking Adapter> port 0xd800-0xd807 mem 0xefffd000-0xefffdfff,0xefffc000-0xefffc0ff,0xefffb000-0xefffb00f irq 21 at device 15.0 on pci0 miibus2: <MII bus> on nfe0 rlphy2: <RTL8201L 10/100 media interface> PHY 1 on miibus2 rlphy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto nfe0: Ethernet address: 00:22:15:15:84:41 nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] vgapci0: <VGA-compatible display> mem 0xed000000-0xedffffff,0xd0000000-0xdfffffff,0xee000000-0xeeffffff irq 22 at device 16.0 on pci0 acpi_tz0: <Thermal Zone> on acpi0 fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FILTER] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] cpu0: <ACPI CPU> on acpi0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 928092806000928 device_attach: est0 attach returned 6 p4tcc0: <CPU Frequency Thermal Control> on cpu0 cpu1: <ACPI CPU> on acpi0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 928092806000928 device_attach: est1 attach returned 6 p4tcc1: <CPU Frequency Thermal Control> on cpu1 pmtimer0 on isa0 orm0: <ISA Option ROM> at iomem 0xd0000-0xd3fff pnpid ORM0000 on isa0 ppc0: parallel port not found. sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding sio0: [FILTER] sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 1.000 msec ipfw2 initialized, divert enabled, nat enabled, rule-based forwarding enabled, default to accept, logging unlimited ad0: 76319MB <WDC WD800JB-00JJC0 05.01C05> at ata0-master UDMA100 ad4: 953869MB <Seagate ST31000340AS SD15> at ata2-master UDMA33 SMP: AP CPU #1 Launched! Trying to mount root from ufs:/dev/ad0s1a WARNING: / was not properly dismounted rl0: link state changed to UP WARNING: /usr2 was not properly dismounted WARNING: attempt to net_add_domain(netgraph) after domainfinalize() ************************************************************************ ps ax   PID  TT  STAT      TIME COMMAND     0  ??  DLs    0:00.01 [swapper]     1  ??  ILs    0:00.00 /sbin/init --     2  ??  DL     0:00.01 [g_event]     3  ??  DL     0:01.23 [g_up]     4  ??  DL     0:02.28 [g_down]     5  ??  DL     0:00.00 [thread taskq]     6  ??  DL     0:00.00 [acpi_task_0]     7  ??  DL     0:00.00 [acpi_task_1]     8  ??  DL     0:00.00 [acpi_task_2]     9  ??  DL     0:00.00 [kqueue taskq]    10  ??  DL     0:00.00 [audit]    11  ??  RL     5:00.34 [idle: cpu1]    12  ??  RL     4:58.78 [idle: cpu0]    13  ??  WL     0:00.67 [swi4: clock sio]    14  ??  WL     0:00.00 [swi3: vm]    15  ??  WL     0:00.00 [swi1: net]    16  ??  DL     0:00.10 [yarrow]    17  ??  WL     0:00.01 [swi6: Giant taskq]    18  ??  WL     0:00.00 [swi6: task queue]    19  ??  DL     0:00.00 [xpt_thrd]    20  ??  WL     0:00.00 [swi2: cambio]    21  ??  WL     0:00.00 [swi5: +]    22  ??  WL     0:00.00 [irq9: acpi0]    23  ??  WL     0:00.00 [irq21: ohci0]    24  ??  DL     0:00.00 [usb0]    25  ??  DL     0:00.00 [usbtask-hc]    26  ??  DL     0:00.00 [usbtask-dr]    27  ??  WL     0:00.00 [irq22: ehci0]    28  ??  DL     0:00.00 [usb1]    29  ??  WL     0:00.79 [irq14: ata0]    30  ??  WL     0:00.00 [irq15: ata1]    31  ??  WL     0:00.01 [irq18: rl0]    32  ??  WL     0:00.00 [irq19: rl1]    33  ??  WL     0:00.01 [irq20: atapci1]    34  ??  DL     0:00.01 [nfe0 taskq]    35  ??  DL     0:00.02 [acpi_thermal]    36  ??  DL     0:00.00 [acpi_cooling0]    37  ??  DL     0:00.00 [fdc0]    38  ??  WL     0:00.02 [irq1: atkbd0]    39  ??  WL     0:00.00 [swi0: sio]    40  ??  DL     0:00.00 [sctp_iterator]    41  ??  DL     0:00.37 [dummynet]    42  ??  DL     0:00.00 [pagedaemon]    43  ??  DL     0:00.00 [vmdaemon]    44  ??  DL     0:00.00 [pagezero]    45  ??  DL     0:00.00 [bufdaemon]    46  ??  DL     0:00.01 [syncer]    47  ??  DL     0:00.00 [vnlru]    48  ??  DL     0:00.00 [softdepflush]   139  ??  Is     0:00.00 adjkerntz -i   534  ??  Is     0:00.00 /sbin/devd   610  ??  Ss     0:00.01 /sbin/natd -n nfe0   632  ??  Is     0:00.00 /sbin/routed -q   678  ??  Is     0:00.01 /usr/sbin/syslogd -s   755  ??  Ss     0:00.01 /usr/local/sbin/nmbd -D -s /usr/local/etc/smb.conf   768  ??  Ss     0:00.01 /usr/local/sbin/smbd -D -s /usr/local/etc/smb.conf   774  ??  Is     0:00.00 proftpd: (accepting connections) (proftpd)   806  ??  I      0:00.00 /usr/local/sbin/smbd -D -s /usr/local/etc/smb.conf   807  ??  Is     0:00.00 /usr/local/sbin/dhcpd -cf /usr/local/etc/dhcpd.conf -   865  ??  Ss     0:00.02 /usr/local/libexec/netams -lf /usr/local/etc/netams.c   872  ??  Ss     0:00.03 /usr/local/apache2/bin/httpd   894  ??  Is     0:00.00 /usr/sbin/sshd   900  ??  I      0:00.00 /usr/local/apache2/bin/httpd   901  ??  I      0:00.00 /usr/local/apache2/bin/httpd   902  ??  I      0:00.00 /usr/local/apache2/bin/httpd   903  ??  I      0:00.00 /usr/local/apache2/bin/httpd   904  ??  I      0:00.00 /usr/local/apache2/bin/httpd   905  ??  Ss     0:00.00 sendmail: accepting connections (sendmail)   911  ??  Is     0:00.00 sendmail: Queue runner@00:30:00 for /var/spool/client   917  ??  Ss     0:00.00 /usr/sbin/cron -s   987  v0  Is+    0:00.00 /usr/libexec/getty Pc ttyv0   988  v1  Is     0:00.01 login [pam] (login)   995  v1  I      0:00.02 -csh (csh) 1005  v1  S+     0:00.07 mc   989  v2  Is+    0:00.00 /usr/libexec/getty Pc ttyv2   990  v3  Is+    0:00.00 /usr/libexec/getty Pc ttyv3   991  v4  Is+    0:00.00 /usr/libexec/getty Pc ttyv4   992  v5  Is+    0:00.00 /usr/libexec/getty Pc ttyv5   993  v6  Is+    0:00.00 /usr/libexec/getty Pc ttyv6   994  v7  Is+    0:00.00 /usr/libexec/getty Pc ttyv7   935 con- S      0:00.12 /usr/local/mysql/bin/mysqld -u root 1007  p0  Ss     0:00.02 tcsh (csh) 1020  p0  R+     0:00.00 ps ax **************************************************************************************** В чем причина ошибки? Спасибо за внимание.

Ваше сообщение
Имя*:
EMail:	Для отправки новых сообщений в текущей нити на email укажите знак ! перед адресом, например, !user@host.ru (!! - не показывать email). Более тонкая настройка отправки ответов производится в профиле зарегистрированного участника форума.
Заголовок*:
Сообщение*:	> Доброго времени суток! > Имеется машинка с FreeBSD 7.1 RC2, работающая в сети. Работает стабильно, пока > дело не доходит до копирования ряда файлов(чем больше файлы и чем > больше их, тем вероятнее появление ошибки). В этом случае на определенном > этапе вылетает следующее сообщение и система виснет. После этого только ресет > по черному помогает возобновить работу. В результате, после этого fsck при > загрузке находит кучу ошибок, но загрузка проходит нормально. > panic: vm_page_insert: page already inserted (root) ON ttyv1 > cpuid = 1 > Sleeping thread (tid 100069, pid 999) owns a non-sleepable lock > panic: sleeping thread > cpuid = 1 > Не важно каким способом проходит копирование(smbd,ftp, комманда cp) ошибка повторяется > при всех способах. > Ядра с предыдущих версий(6.2, 6.4, 7.0) системы загружатся не хотели(как GENERIC с > диска, так и вручную собранное). > Сообщения ядра при загрузке (dmesg) > Waiting (max 60 seconds) for system process `vnlru' to stop...done > Waiting (max 60 seconds) for system process `bufdaemon' to stop...done > Waiting (max 60 seconds) for system process `syncer' to stop... > Syncing disks, vnodes remaining...0 done > All buffers synced. > Copyright (c) 1992-2008 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 7.1-RC2 #9: Wed Dec 24 21:41:19 EET 2008 > root@lsd.chokolovka.net:/usr/obj/usr/src/sys/LSD > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Intel(R) Pentium(R) Dual CPU E2160 @ 1.80GHz (1800.02-MHz > 686-class CPU) > Origin = "GenuineIntel" Id = 0x6fd Stepping = > 13 > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > Features2=0xe39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM> > AMD Features=0x20100000<NX,LM> > AMD Features2=0x1<LAHF> > Cores per package: 2 > real memory = 2146369536 (2046 MB) > avail memory = 2094977024 (1997 MB) > ACPI APIC Table: <Nvidia ASUSACPI> > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs > cpu0 (BSP): APIC ID: 0 > cpu1 (AP): APIC ID: 1 > ioapic0: Changing APIC ID to 4 > ioapic0 <Version 1.1> irqs 0-23 on motherboard > kbd1 at kbdmux0 > acpi0: <Nvidia ASUSACPI> on motherboard > acpi0: [ITHREAD] > acpi0: Power Button (fixed) > acpi0: reservation of 100000, 7fdf0000 (3) failed > acpi0: reservation of 0, a0000 (3) failed > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 > acpi_button0: <Power Button> on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > pci0: <memory, RAM> at device 0.1 (no driver attached) > pci0: <memory, RAM> at device 1.0 (no driver attached) > pci0: <memory, RAM> at device 1.1 (no driver attached) > pci0: <memory, RAM> at device 1.2 (no driver attached) > pci0: <memory, RAM> at device 1.3 (no driver attached) > pci0: <memory, RAM> at device 1.4 (no driver attached) > pci0: <memory, RAM> at device 1.5 (no driver attached) > pci0: <memory, RAM> at device 1.6 (no driver attached) > pci0: <memory, RAM> at device 2.0 (no driver attached) > isab0: <PCI-ISA bridge> at device 3.0 on pci0 > isa0: <ISA bus> on isab0 > pci0: <serial bus, SMBus> at device 3.1 (no driver attached) > pci0: <memory, RAM> at device 3.2 (no driver attached) > pci0: <memory, RAM> at device 3.4 (no driver attached) > ohci0: <OHCI (generic) USB controller> mem 0xeffff000-0xefffffff irq 21 at device 4.0 > on pci0 > ohci0: [GIANT-LOCKED] > ohci0: [ITHREAD] > usb0: OHCI version 1.0, legacy support > usb0: SMM does not respond, resetting > usb0: <OHCI (generic) USB controller> on ohci0 > usb0: USB revision 1.0 > uhub0: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on > usb0 > uhub0: 8 ports with 8 removable, self powered > ehci0: <EHCI (generic) USB 2.0 controller> mem 0xefffe000-0xefffe0ff irq 22 at device > 4.1 on pci0 > ehci0: [GIANT-LOCKED] > ehci0: [ITHREAD] > usb1: EHCI version 1.0 > usb1: companion controller, 10 ports each: usb0 > usb1: <EHCI (generic) USB 2.0 controller> on ehci0 > usb1: USB revision 2.0 > uhub1: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on > usb1 > uhub1: 8 ports with 8 removable, self powered > atapci0: <nVidia nForce MCP73 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f > at device 8.0 on pci0 > ata0: <ATA channel 0> on atapci0 > ata0: [ITHREAD] > ata1: <ATA channel 1> on atapci0 > ata1: [ITHREAD] > pci0: <multimedia> at device 9.0 (no driver attached) > pcib1: <ACPI PCI-PCI bridge> at device 10.0 on pci0 > pci1: <ACPI PCI bus> on pcib1 > rl0: <RealTek 8139 10/100BaseTX> port 0xac00-0xacff mem 0xefbff000-0xefbff0ff irq 18 at > device 6.0 on pci1 > miibus0: <MII bus> on rl0 > rlphy0: <RealTek internal media interface> PHY 0 on miibus0 > rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > rl0: Ethernet address: 00:50:fc:ae:11:24 > rl0: [ITHREAD] > rl1: <RealTek 8139 10/100BaseTX> port 0xa800-0xa8ff mem 0xefbfe000-0xefbfe0ff irq 19 at > device 7.0 on pci1 > miibus1: <MII bus> on rl1 > rlphy1: <RealTek internal media interface> PHY 0 on miibus1 > rlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > rl1: Ethernet address: 00:30:4f:14:5a:e4 > rl1: [ITHREAD] > pcib2: <ACPI PCI-PCI bridge> at device 11.0 on pci0 > pci2: <ACPI PCI bus> on pcib2 > pcib3: <ACPI PCI-PCI bridge> at device 12.0 on pci0 > pci3: <ACPI PCI bus> on pcib3 > pcib4: <ACPI PCI-PCI bridge> at device 13.0 on pci0 > pci4: <ACPI PCI bus> on pcib4 > atapci1: <nVidia ATA controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xdc00-0xdc0f > mem 0xefff8000-0xefff9fff irq 20 at device 14.0 on pci0 > atapci1: [ITHREAD] > ata2: <ATA channel 0> on atapci1 > ata2: [ITHREAD] > ata3: <ATA channel 1> on atapci1 > ata3: [ITHREAD] > nfe0: <NVIDIA nForce MCP73 Networking Adapter> port 0xd800-0xd807 mem 0xefffd000-0xefffdfff,0xefffc000-0xefffc0ff,0xefffb000-0xefffb00f > irq 21 at device 15.0 on pci0 > miibus2: <MII bus> on nfe0 > rlphy2: <RTL8201L 10/100 media interface> PHY 1 on miibus2 > rlphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > nfe0: Ethernet address: 00:22:15:15:84:41 > nfe0: [FILTER] > nfe0: [FILTER] > nfe0: [FILTER] > nfe0: [FILTER] > nfe0: [FILTER] > nfe0: [FILTER] > nfe0: [FILTER] > nfe0: [FILTER] > vgapci0: <VGA-compatible display> mem 0xed000000-0xedffffff,0xd0000000-0xdfffffff,0xee000000-0xeeffffff > irq 22 at device 16.0 on pci0 > acpi_tz0: <Thermal Zone> on acpi0 > fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 > fdc0: [FILTER] > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > atkbd0: [ITHREAD] > cpu0: <ACPI CPU> on acpi0 > est0: <Enhanced SpeedStep Frequency Control> on cpu0 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 928092806000928 > device_attach: est0 attach returned 6 > p4tcc0: <CPU Frequency Thermal Control> on cpu0 > cpu1: <ACPI CPU> on acpi0 > est1: <Enhanced SpeedStep Frequency Control> on cpu1 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 928092806000928 > device_attach: est1 attach returned 6 > p4tcc1: <CPU Frequency Thermal Control> on cpu1 > pmtimer0 on isa0 > orm0: <ISA Option ROM> at iomem 0xd0000-0xd3fff pnpid ORM0000 on isa0 > ppc0: parallel port not found. > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sio0: configured irq 4 not in bitmap of probed irqs 0 > sio0: port may not be enabled > sio0: configured irq 4 not in bitmap of probed irqs 0 > sio0: port may not be enabled > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > sio0: type 8250 or not responding > sio0: [FILTER] > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1: port may not be enabled > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > Timecounters tick every 1.000 msec > ipfw2 initialized, divert enabled, nat enabled, rule-based forwarding enabled, default > to accept, logging unlimited > ad0: 76319MB <WDC WD800JB-00JJC0 05.01C05> at ata0-master UDMA100 > ad4: 953869MB <Seagate ST31000340AS SD15> at ata2-master UDMA33 > SMP: AP CPU #1 Launched! > Trying to mount root from ufs:/dev/ad0s1a > rl0: link state changed to UP > WARNING: /usr2 was not properly dismounted > WARNING: attempt to net_add_domain(netgraph) after domainfinalize() > panic: vm_page_insert: page already inserted > cpuid = 1 > Sleeping thread (tid 100069, pid 999) owns a non-sleepable lock > panic: sleeping thread > cpuid = 1 > Copyright (c) 1992-2008 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 7.1-RC2 #9: Wed Dec 24 21:41:19 EET 2008 > root@lsd.chokolovka.net:/usr/obj/usr/src/sys/LSD > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Intel(R) Pentium(R) Dual CPU E2160 @ 1.80GHz (1800.02-MHz > 686-class CPU) > Origin = "GenuineIntel" Id = 0x6fd Stepping = > 13 > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > Features2=0xe39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM> > AMD Features=0x20100000<NX,LM> > AMD Features2=0x1<LAHF> > Cores per package: 2 > real memory = 2146369536 (2046 MB) > avail memory = 2094977024 (1997 MB) > ACPI APIC Table: <Nvidia ASUSACPI> > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs > cpu0 (BSP): APIC ID: 0 > cpu1 (AP): APIC ID: 1 > ioapic0: Changing APIC ID to 4 > ioapic0 <Version 1.1> irqs 0-23 on motherboard > kbd1 at kbdmux0 > acpi0: <Nvidia ASUSACPI> on motherboard > acpi0: [ITHREAD] > acpi0: Power Button (fixed) > acpi0: reservation of 100000, 7fdf0000 (3) failed > acpi0: reservation of 0, a0000 (3) failed > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 > acpi_button0: <Power Button> on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > pci0: <memory, RAM> at device 0.1 (no driver attached) > pci0: <memory, RAM> at device 1.0 (no driver attached) > pci0: <memory, RAM> at device 1.1 (no driver attached) > pci0: <memory, RAM> at device 1.2 (no driver attached) > pci0: <memory, RAM> at device 1.3 (no driver attached) > pci0: <memory, RAM> at device 1.4 (no driver attached) > pci0: <memory, RAM> at device 1.5 (no driver attached) > pci0: <memory, RAM> at device 1.6 (no driver attached) > pci0: <memory, RAM> at device 2.0 (no driver attached) > isab0: <PCI-ISA bridge> at device 3.0 on pci0 > isa0: <ISA bus> on isab0 > pci0: <serial bus, SMBus> at device 3.1 (no driver attached) > pci0: <memory, RAM> at device 3.2 (no driver attached) > pci0: <memory, RAM> at device 3.4 (no driver attached) > ohci0: <OHCI (generic) USB controller> mem 0xeffff000-0xefffffff irq 21 at device 4.0 > on pci0 > ohci0: [GIANT-LOCKED] > ohci0: [ITHREAD] > usb0: OHCI version 1.0, legacy support > usb0: SMM does not respond, resetting > usb0: <OHCI (generic) USB controller> on ohci0 > usb0: USB revision 1.0 > uhub0: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on > usb0 > uhub0: 8 ports with 8 removable, self powered > ehci0: <EHCI (generic) USB 2.0 controller> mem 0xefffe000-0xefffe0ff irq 22 at device > 4.1 on pci0 > ehci0: [GIANT-LOCKED] > ehci0: [ITHREAD] > usb1: EHCI version 1.0 > usb1: companion controller, 10 ports each: usb0 > usb1: <EHCI (generic) USB 2.0 controller> on ehci0 > usb1: USB revision 2.0 > uhub1: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on > usb1 > uhub1: 8 ports with 8 removable, self powered > atapci0: <nVidia nForce MCP73 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f > at device 8.0 on pci0 > ata0: <ATA channel 0> on atapci0 > ata0: [ITHREAD] > ata1: <ATA channel 1> on atapci0 > ata1: [ITHREAD] > pci0: <multimedia> at device 9.0 (no driver attached) > pcib1: <ACPI PCI-PCI bridge> at device 10.0 on pci0 > pci1: <ACPI PCI bus> on pcib1 > rl0: <RealTek 8139 10/100BaseTX> port 0xac00-0xacff mem 0xefbff000-0xefbff0ff irq 18 at > device 6.0 on pci1 > miibus0: <MII bus> on rl0 > rlphy0: <RealTek internal media interface> PHY 0 on miibus0 > rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > rl0: Ethernet address: 00:50:fc:ae:11:24 > rl0: [ITHREAD] > rl1: <RealTek 8139 10/100BaseTX> port 0xa800-0xa8ff mem 0xefbfe000-0xefbfe0ff irq 19 at > device 7.0 on pci1 > miibus1: <MII bus> on rl1 > rlphy1: <RealTek internal media interface> PHY 0 on miibus1 > rlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > rl1: Ethernet address: 00:30:4f:14:5a:e4 > rl1: [ITHREAD] > pcib2: <ACPI PCI-PCI bridge> at device 11.0 on pci0 > pci2: <ACPI PCI bus> on pcib2 > pcib3: <ACPI PCI-PCI bridge> at device 12.0 on pci0 > pci3: <ACPI PCI bus> on pcib3 > pcib4: <ACPI PCI-PCI bridge> at device 13.0 on pci0 > pci4: <ACPI PCI bus> on pcib4 > atapci1: <nVidia ATA controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xdc00-0xdc0f > mem 0xefff8000-0xefff9fff irq 20 at device 14.0 on pci0 > atapci1: [ITHREAD] > ata2: <ATA channel 0> on atapci1 > ata2: [ITHREAD] > ata3: <ATA channel 1> on atapci1 > ata3: [ITHREAD] > nfe0: <NVIDIA nForce MCP73 Networking Adapter> port 0xd800-0xd807 mem 0xefffd000-0xefffdfff,0xefffc000-0xefffc0ff,0xefffb000-0xefffb00f > irq 21 at device 15.0 on pci0 > miibus2: <MII bus> on nfe0 > rlphy2: <RTL8201L 10/100 media interface> PHY 1 on miibus2 > rlphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > nfe0: Ethernet address: 00:22:15:15:84:41 > nfe0: [FILTER] > nfe0: [FILTER] > nfe0: [FILTER] > nfe0: [FILTER] > nfe0: [FILTER] > nfe0: [FILTER] > nfe0: [FILTER] > nfe0: [FILTER] > vgapci0: <VGA-compatible display> mem 0xed000000-0xedffffff,0xd0000000-0xdfffffff,0xee000000-0xeeffffff > irq 22 at device 16.0 on pci0 > acpi_tz0: <Thermal Zone> on acpi0 > fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 > fdc0: [FILTER] > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > atkbd0: [ITHREAD] > cpu0: <ACPI CPU> on acpi0 > est0: <Enhanced SpeedStep Frequency Control> on cpu0 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 928092806000928 > device_attach: est0 attach returned 6 > p4tcc0: <CPU Frequency Thermal Control> on cpu0 > cpu1: <ACPI CPU> on acpi0 > est1: <Enhanced SpeedStep Frequency Control> on cpu1 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 928092806000928 > device_attach: est1 attach returned 6 > p4tcc1: <CPU Frequency Thermal Control> on cpu1 > pmtimer0 on isa0 > orm0: <ISA Option ROM> at iomem 0xd0000-0xd3fff pnpid ORM0000 on isa0 > ppc0: parallel port not found. > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sio0: configured irq 4 not in bitmap of probed irqs 0 > sio0: port may not be enabled > sio0: configured irq 4 not in bitmap of probed irqs 0 > sio0: port may not be enabled > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > sio0: type 8250 or not responding > sio0: [FILTER] > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1: port may not be enabled > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > Timecounters tick every 1.000 msec > ipfw2 initialized, divert enabled, nat enabled, rule-based forwarding enabled, default > to accept, logging unlimited > ad0: 76319MB <WDC WD800JB-00JJC0 05.01C05> at ata0-master UDMA100 > ad4: 953869MB <Seagate ST31000340AS SD15> at ata2-master UDMA33 > SMP: AP CPU #1 Launched! > Trying to mount root from ufs:/dev/ad0s1a > WARNING: / was not properly dismounted > rl0: link state changed to UP > WARNING: /usr2 was not properly dismounted > WARNING: attempt to net_add_domain(netgraph) after domainfinalize() > ************************************************************************ > ps ax > PID TT STAT > TIME COMMAND > 0 ?? DLs > 0:00.01 [swapper] > 1 ?? ILs > 0:00.00 /sbin/init -- > 2 ?? DL > 0:00.01 [g_event] > 3 ?? DL > 0:01.23 [g_up] > 4 ?? DL > 0:02.28 [g_down] > 5 ?? DL > 0:00.00 [thread taskq] > 6 ?? DL > 0:00.00 [acpi_task_0] > 7 ?? DL > 0:00.00 [acpi_task_1] > 8 ?? DL > 0:00.00 [acpi_task_2] > 9 ?? DL > 0:00.00 [kqueue taskq] > 10 ?? DL > 0:00.00 [audit] > 11 ?? RL > 5:00.34 [idle: cpu1] > 12 ?? RL > 4:58.78 [idle: cpu0] > 13 ?? WL > 0:00.67 [swi4: clock sio] > 14 ?? WL > 0:00.00 [swi3: vm] > 15 ?? WL > 0:00.00 [swi1: net] > 16 ?? DL > 0:00.10 [yarrow] > 17 ?? WL > 0:00.01 [swi6: Giant taskq] > 18 ?? WL > 0:00.00 [swi6: task queue] > 19 ?? DL > 0:00.00 [xpt_thrd] > 20 ?? WL > 0:00.00 [swi2: cambio] > 21 ?? WL > 0:00.00 [swi5: +] > 22 ?? WL > 0:00.00 [irq9: acpi0] > 23 ?? WL > 0:00.00 [irq21: ohci0] > 24 ?? DL > 0:00.00 [usb0] > 25 ?? DL > 0:00.00 [usbtask-hc] > 26 ?? DL > 0:00.00 [usbtask-dr] > 27 ?? WL > 0:00.00 [irq22: ehci0] > 28 ?? DL > 0:00.00 [usb1] > 29 ?? WL > 0:00.79 [irq14: ata0] > 30 ?? WL > 0:00.00 [irq15: ata1] > 31 ?? WL > 0:00.01 [irq18: rl0] > 32 ?? WL > 0:00.00 [irq19: rl1] > 33 ?? WL > 0:00.01 [irq20: atapci1] > 34 ?? DL > 0:00.01 [nfe0 taskq] > 35 ?? DL > 0:00.02 [acpi_thermal] > 36 ?? DL > 0:00.00 [acpi_cooling0] > 37 ?? DL > 0:00.00 [fdc0] > 38 ?? WL > 0:00.02 [irq1: atkbd0] > 39 ?? WL > 0:00.00 [swi0: sio] > 40 ?? DL > 0:00.00 [sctp_iterator] > 41 ?? DL > 0:00.37 [dummynet] > 42 ?? DL > 0:00.00 [pagedaemon] > 43 ?? DL > 0:00.00 [vmdaemon] > 44 ?? DL > 0:00.00 [pagezero] > 45 ?? DL > 0:00.00 [bufdaemon] > 46 ?? DL > 0:00.01 [syncer] > 47 ?? DL > 0:00.00 [vnlru] > 48 ?? DL > 0:00.00 [softdepflush] > 139 ?? Is 0:00.00 > adjkerntz -i > 534 ?? Is 0:00.00 > /sbin/devd > 610 ?? Ss 0:00.01 > /sbin/natd -n nfe0 > 632 ?? Is 0:00.00 > /sbin/routed -q > 678 ?? Is 0:00.01 > /usr/sbin/syslogd -s > 755 ?? Ss 0:00.01 > /usr/local/sbin/nmbd -D -s /usr/local/etc/smb.conf > 768 ?? Ss 0:00.01 > /usr/local/sbin/smbd -D -s /usr/local/etc/smb.conf > 774 ?? Is 0:00.00 > proftpd: (accepting connections) (proftpd) > 806 ?? I > 0:00.00 /usr/local/sbin/smbd -D -s /usr/local/etc/smb.conf > 807 ?? Is 0:00.00 > /usr/local/sbin/dhcpd -cf /usr/local/etc/dhcpd.conf - > 865 ?? Ss 0:00.02 > /usr/local/libexec/netams -lf /usr/local/etc/netams.c > 872 ?? Ss 0:00.03 > /usr/local/apache2/bin/httpd > 894 ?? Is 0:00.00 > /usr/sbin/sshd > 900 ?? I > 0:00.00 /usr/local/apache2/bin/httpd > 901 ?? I > 0:00.00 /usr/local/apache2/bin/httpd > 902 ?? I > 0:00.00 /usr/local/apache2/bin/httpd > 903 ?? I > 0:00.00 /usr/local/apache2/bin/httpd > 904 ?? I > 0:00.00 /usr/local/apache2/bin/httpd > 905 ?? Ss 0:00.00 > sendmail: accepting connections (sendmail) > 911 ?? Is 0:00.00 > sendmail: Queue runner@00:30:00 for /var/spool/client > 917 ?? Ss 0:00.00 > /usr/sbin/cron -s > 987 v0 Is+ 0:00.00 /usr/libexec/getty > Pc ttyv0 > 988 v1 Is 0:00.01 > login [pam] (login) > 995 v1 I > 0:00.02 -csh (csh) > 1005 v1 S+ 0:00.07 mc > 989 v2 Is+ 0:00.00 /usr/libexec/getty > Pc ttyv2 > 990 v3 Is+ 0:00.00 /usr/libexec/getty > Pc ttyv3 > 991 v4 Is+ 0:00.00 /usr/libexec/getty > Pc ttyv4 > 992 v5 Is+ 0:00.00 /usr/libexec/getty > Pc ttyv5 > 993 v6 Is+ 0:00.00 /usr/libexec/getty > Pc ttyv6 > 994 v7 Is+ 0:00.00 /usr/libexec/getty > Pc ttyv7 > 935 con- S 0:00.12 /usr/local/mysql/bin/mysqld > -u root > 1007 p0 Ss 0:00.02 tcsh > (csh) > 1020 p0 R+ 0:00.00 ps > ax > **************************************************************************************** > В чем причина ошибки? Спасибо за внимание.
	Введите код, изображенный на картинке: