forum.opennet.ru

Составление сообщения

Исходное сообщение

"zpool import не принимает пул хотя все online"
Отправлено interface, 29-Апр-20 01:07

> для начала:
> 1. проверьте HDD: smartctl short и long test
> 2. проверьте RAM:
> Я правильно понял что FreeNAS грузится, и zfs работает, но import
> сделать Вы не можете?
> Если FreeNAS грузится и работает, что будет в случае:
> # zpool status pool1
> если все Ok
> # zpool scrub pool1
> ps. После чего это произошло? Эти диски с другой FreeNAS?
после чего произошло сказать не могу. просто после ребута виртуалки с nas она начала вываливаться в отладчик при загрузке по причине паники. С памятью все хорошо ибо рядом еще виртуалки норм пашут. FreeNAS была установлена по соседству и в нее проброшены диски незагружающейся нас.
статус получить не удается ибо как я понимаю он требует предварительного импорта
zpool status pool1
cannot open 'pool1': no such pool
смарт тесты провел. вот вывод одного из дисков - они впринципе похожи для обоих:
root@pve:~# smartctl --all /dev/sdc
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.10.17-2-pve] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family:     Toshiba 3.5" DT01ACA... Desktop HDD
Device Model:     TOSHIBA DT01ACA100
Serial Number:    Z5UGYVTNS
LU WWN Device Id: 5 000039 fe7d4e4ce
Firmware Version: MS2OA750
User Capacity:    1,000,203,804,160 bytes [1.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Wed Apr 29 00:58:01 2020 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status:  (0x85) Offline data collection activity
                                        was aborted by an interrupting command from host.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      ( 249) Self-test routine in progress...
                                        90% of test remaining.
Total time to complete Offline
data collection:                ( 7555) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        ( 126) minutes.
SCT capabilities:              (0x003d) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0005   140   140   054    Pre-fail  Offline      -       78
  3 Spin_Up_Time            0x0007   136   136   024    Pre-fail  Always       -       160 (Average 176)
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       182
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0005   118   118   020    Pre-fail  Offline      -       33
  9 Power_On_Hours          0x0012   096   096   000    Old_age   Always       -       31612
10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       181
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       282
193 Load_Cycle_Count        0x0012   100   100   000    Old_age   Always       -       282
194 Temperature_Celsius     0x0002   166   166   000    Old_age   Always       -       36 (Min/Max 17/50)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0
SMART Error Log Version: 1
ATA Error Count: 726 (device log contains only the most recent five errors)
        CR = Command Register [HEX]
        FR = Features Register [HEX]
        SC = Sector Count Register [HEX]
        SN = Sector Number Register [HEX]
        CL = Cylinder Low Register [HEX]
        CH = Cylinder High Register [HEX]
        DH = Device/Head Register [HEX]
        DC = Device Command Register [HEX]
        ER = Error register [HEX]
        ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 726 occurred at disk power-on lifetime: 27182 hours (1132 days + 14 hours)
  When the command that caused the error occurred, the device was active or idle.
  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 81 af 5e b5 0a  Error: UNC at LBA = 0x0ab55eaf = 179658415
  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 90 58 a0 5e b5 40 08   5d+04:35:24.617  READ FPDMA QUEUED
  60 00 50 00 6a 19 40 08   5d+04:35:24.616  READ FPDMA QUEUED
  60 00 48 e8 95 dc 40 08   5d+04:35:24.614  READ FPDMA QUEUED
  60 00 40 e8 94 dc 40 08   5d+04:35:24.613  READ FPDMA QUEUED
  60 00 38 e8 93 dc 40 08   5d+04:35:24.612  READ FPDMA QUEUED
Error 725 occurred at disk power-on lifetime: 26908 hours (1121 days + 4 hours)
  When the command that caused the error occurred, the device was active or idle.
  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 01 07 20 00 00  Error: UNC at LBA = 0x00002007 = 8199
  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 08 c0 00 20 00 40 08      00:04:40.671  READ FPDMA QUEUED
  60 08 b8 f0 5f 70 40 08      00:04:40.671  READ FPDMA QUEUED
  60 08 b0 80 5f 70 40 08      00:04:40.671  READ FPDMA QUEUED
  60 01 a8 00 00 00 40 08      00:04:40.634  READ FPDMA QUEUED
  ea 00 00 00 00 00 a0 08      00:04:36.139  FLUSH CACHE EXT
Error 724 occurred at disk power-on lifetime: 24212 hours (1008 days + 20 hours)
  When the command that caused the error occurred, the device was active or idle.
  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 01 87 5f 70 04  Error: UNC at LBA = 0x04705f87 = 74473351
  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 08 c0 80 5f 70 40 08      00:04:31.080  READ FPDMA QUEUED
  60 01 b8 00 00 00 40 08      00:04:31.080  READ FPDMA QUEUED
  60 08 a8 00 20 00 40 08      00:04:30.932  READ FPDMA QUEUED
  60 08 98 08 20 00 40 08      00:04:30.931  READ FPDMA QUEUED
  60 08 90 00 20 00 40 08      00:04:30.927  READ FPDMA QUEUED
Error 723 occurred at disk power-on lifetime: 20433 hours (851 days + 9 hours)
  When the command that caused the error occurred, the device was active or idle.
  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 01 87 5f 70 04  Error: UNC at LBA = 0x04705f87 = 74473351
  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 08 58 80 5f 70 40 08      00:04:30.247  READ FPDMA QUEUED
  60 01 40 00 00 00 40 08      00:04:30.211  READ FPDMA QUEUED
  ea 00 00 00 00 00 a0 08      00:04:27.877  FLUSH CACHE EXT
  61 08 28 c8 3f 70 40 08      00:04:27.877  WRITE FPDMA QUEUED
  61 08 20 c8 3d 70 40 08      00:04:27.877  WRITE FPDMA QUEUED
Error 722 occurred at disk power-on lifetime: 19224 hours (801 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.
  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 01 87 5f 70 04  Error: UNC at LBA = 0x04705f87 = 74473351
  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 08 60 80 5f 70 40 08      00:04:21.648  READ FPDMA QUEUED
  60 01 48 00 00 00 40 08      00:04:21.610  READ FPDMA QUEUED
  ea 00 00 00 00 00 a0 08      00:04:21.322  FLUSH CACHE EXT
  61 08 38 30 3f 70 40 08      00:04:21.321  WRITE FPDMA QUEUED
  61 08 30 30 3d 70 40 08      00:04:21.321  WRITE FPDMA QUEUED
SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
если я верно понял то вот подобная строчка говорит что с диском все плохо
1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0

Исходное сообщение
"zpool import не принимает пул хотя все online" Отправлено interface, 29-Апр-20 01:07
> для начала: > 1. проверьте HDD: smartctl short и long test > 2. проверьте RAM: > Я правильно понял что FreeNAS грузится, и zfs работает, но import > сделать Вы не можете? > Если FreeNAS грузится и работает, что будет в случае: > # zpool status pool1 > если все Ok > # zpool scrub pool1 > ps. После чего это произошло? Эти диски с другой FreeNAS? после чего произошло сказать не могу. просто после ребута виртуалки с nas она начала вываливаться в отладчик при загрузке по причине паники. С памятью все хорошо ибо рядом еще виртуалки норм пашут. FreeNAS была установлена по соседству и в нее проброшены диски незагружающейся нас. статус получить не удается ибо как я понимаю он требует предварительного импорта zpool status pool1 cannot open 'pool1': no such pool смарт тесты провел. вот вывод одного из дисков - они впринципе похожи для обоих: root@pve:~# smartctl --all /dev/sdc smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.10.17-2-pve] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Toshiba 3.5" DT01ACA... Desktop HDD Device Model: TOSHIBA DT01ACA100 Serial Number: Z5UGYVTNS LU WWN Device Id: 5 000039 fe7d4e4ce Firmware Version: MS2OA750 User Capacity: 1,000,203,804,160 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed Apr 29 00:58:01 2020 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x85) Offline data collection activity was aborted by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 249) Self-test routine in progress... 90% of test remaining. Total time to complete Offline data collection: ( 7555) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 126) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0 2 Throughput_Performance 0x0005 140 140 054 Pre-fail Offline - 78 3 Spin_Up_Time 0x0007 136 136 024 Pre-fail Always - 160 (Average 176) 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 182 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 118 118 020 Pre-fail Offline - 33 9 Power_On_Hours 0x0012 096 096 000 Old_age Always - 31612 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 181 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 282 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 282 194 Temperature_Celsius 0x0002 166 166 000 Old_age Always - 36 (Min/Max 17/50) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 726 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 726 occurred at disk power-on lifetime: 27182 hours (1132 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 81 af 5e b5 0a Error: UNC at LBA = 0x0ab55eaf = 179658415 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 90 58 a0 5e b5 40 08 5d+04:35:24.617 READ FPDMA QUEUED 60 00 50 00 6a 19 40 08 5d+04:35:24.616 READ FPDMA QUEUED 60 00 48 e8 95 dc 40 08 5d+04:35:24.614 READ FPDMA QUEUED 60 00 40 e8 94 dc 40 08 5d+04:35:24.613 READ FPDMA QUEUED 60 00 38 e8 93 dc 40 08 5d+04:35:24.612 READ FPDMA QUEUED Error 725 occurred at disk power-on lifetime: 26908 hours (1121 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 01 07 20 00 00 Error: UNC at LBA = 0x00002007 = 8199 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 08 c0 00 20 00 40 08 00:04:40.671 READ FPDMA QUEUED 60 08 b8 f0 5f 70 40 08 00:04:40.671 READ FPDMA QUEUED 60 08 b0 80 5f 70 40 08 00:04:40.671 READ FPDMA QUEUED 60 01 a8 00 00 00 40 08 00:04:40.634 READ FPDMA QUEUED ea 00 00 00 00 00 a0 08 00:04:36.139 FLUSH CACHE EXT Error 724 occurred at disk power-on lifetime: 24212 hours (1008 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 01 87 5f 70 04 Error: UNC at LBA = 0x04705f87 = 74473351 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 08 c0 80 5f 70 40 08 00:04:31.080 READ FPDMA QUEUED 60 01 b8 00 00 00 40 08 00:04:31.080 READ FPDMA QUEUED 60 08 a8 00 20 00 40 08 00:04:30.932 READ FPDMA QUEUED 60 08 98 08 20 00 40 08 00:04:30.931 READ FPDMA QUEUED 60 08 90 00 20 00 40 08 00:04:30.927 READ FPDMA QUEUED Error 723 occurred at disk power-on lifetime: 20433 hours (851 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 01 87 5f 70 04 Error: UNC at LBA = 0x04705f87 = 74473351 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 08 58 80 5f 70 40 08 00:04:30.247 READ FPDMA QUEUED 60 01 40 00 00 00 40 08 00:04:30.211 READ FPDMA QUEUED ea 00 00 00 00 00 a0 08 00:04:27.877 FLUSH CACHE EXT 61 08 28 c8 3f 70 40 08 00:04:27.877 WRITE FPDMA QUEUED 61 08 20 c8 3d 70 40 08 00:04:27.877 WRITE FPDMA QUEUED Error 722 occurred at disk power-on lifetime: 19224 hours (801 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 01 87 5f 70 04 Error: UNC at LBA = 0x04705f87 = 74473351 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 08 60 80 5f 70 40 08 00:04:21.648 READ FPDMA QUEUED 60 01 48 00 00 00 40 08 00:04:21.610 READ FPDMA QUEUED ea 00 00 00 00 00 a0 08 00:04:21.322 FLUSH CACHE EXT 61 08 38 30 3f 70 40 08 00:04:21.321 WRITE FPDMA QUEUED 61 08 30 30 3d 70 40 08 00:04:21.321 WRITE FPDMA QUEUED SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. если я верно понял то вот подобная строчка говорит что с диском все плохо 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0

Ваше сообщение
Имя*:
EMail:	Для отправки новых сообщений в текущей нити на email укажите знак ! перед адресом, например, !user@host.ru (!! - не показывать email). Более тонкая настройка отправки ответов производится в профиле зарегистрированного участника форума.
Заголовок*:
Сообщение*:	>> для начала: >> 1. проверьте HDD: smartctl short и long test >> 2. проверьте RAM: >> Я правильно понял что FreeNAS грузится, и zfs работает, но import >> сделать Вы не можете? >> Если FreeNAS грузится и работает, что будет в случае: >> # zpool status pool1 >> если все Ok >> # zpool scrub pool1 >> ps. После чего это произошло? Эти диски с другой FreeNAS? > после чего произошло сказать не могу. просто после ребута виртуалки с nas > она начала вываливаться в отладчик при загрузке по причине паники. С > памятью все хорошо ибо рядом еще виртуалки норм пашут. FreeNAS была > установлена по соседству и в нее проброшены диски незагружающейся нас. > статус получить не удается ибо как я понимаю он требует предварительного импорта > zpool status pool1 > cannot open 'pool1': no such pool > смарт тесты провел. вот вывод одного из дисков - они впринципе похожи > для обоих: > root@pve:~# smartctl --all /dev/sdc > smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.10.17-2-pve] (local build) > Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org > === START OF INFORMATION SECTION === > Model Family: Toshiba 3.5" DT01ACA... Desktop HDD > Device Model: TOSHIBA DT01ACA100 > Serial Number: Z5UGYVTNS > LU WWN Device Id: 5 000039 fe7d4e4ce > Firmware Version: MS2OA750 > User Capacity: 1,000,203,804,160 bytes [1.00 TB] > Sector Sizes: 512 bytes logical, 4096 bytes physical > Rotation Rate: 7200 rpm > Form Factor: 3.5 inches > Device is: In smartctl database > [for details use: -P show] > ATA Version is: ATA8-ACS T13/1699-D revision 4 > SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) > Local Time is: Wed Apr 29 00:58:01 2020 MSK > SMART support is: Available - device has SMART capability. > SMART support is: Enabled > === START OF READ SMART DATA SECTION === > SMART overall-health self-assessment test result: PASSED > General SMART Values: > Offline data collection status: (0x85) Offline data collection activity > > > > was aborted by an interrupting > command from host. > > > > Auto Offline Data Collection: Enabled. > Self-test execution status: ( 249) Self-test routine > in progress... > > > > 90% of test remaining. > Total time to complete Offline > data collection: > ( 7555) seconds. > Offline data collection > capabilities: > (0x5b) SMART execute > Offline immediate. > > > > Auto Offline data collection on/off > support. > > > > Suspend Offline collection upon new > > > > command. > > > > Offline surface scan supported. > > > > Self-test supported. > > > > No Conveyance Self-test supported. > > > > Selective Self-test supported. > SMART capabilities: > (0x0003) Saves SMART data before entering > > > > power-saving mode. > > > > Supports SMART auto save timer. > Error logging capability: (0x01) Error > logging supported. > > > > General Purpose Logging supported. > Short self-test routine > recommended polling time: ( > 1) minutes. > Extended self-test routine > recommended polling time: ( 126) > minutes. > SCT capabilities: > (0x003d) SCT Status supported. > > > > SCT Error Recovery Control supported. > > > > SCT Feature Control supported. > > > > SCT Data Table supported. > SMART Attributes Data Structure revision number: 16 > Vendor Specific SMART Attributes with Thresholds: > ID# ATTRIBUTE_NAME FLAG > VALUE WORST THRESH TYPE > UPDATED WHEN_FAILED RAW_VALUE > 1 Raw_Read_Error_Rate 0x000b 100 > 100 016 Pre-fail > Always - > 0 > 2 Throughput_Performance 0x0005 140 140 > 054 Pre-fail Offline > - 78 > 3 Spin_Up_Time > 0x0007 136 136 > 024 Pre-fail Always > - 160 > (Average 176) > 4 Start_Stop_Count 0x0012 > 100 100 000 > Old_age Always > - 182 > 5 Reallocated_Sector_Ct 0x0033 100 > 100 005 Pre-fail Always > - > 0 > 7 Seek_Error_Rate > 0x000b 100 100 067 > Pre-fail Always > - 0 > 8 Seek_Time_Performance 0x0005 118 > 118 020 Pre-fail Offline > - > 33 > 9 Power_On_Hours > 0x0012 096 096 000 > Old_age Always > - 31612 > 10 Spin_Retry_Count 0x0013 > 100 100 060 > Pre-fail Always - > 0 > 12 Power_Cycle_Count 0x0032 > 100 100 000 Old_age > Always - > 181 > 192 Power-Off_Retract_Count 0x0032 100 100 000 > Old_age Always > - 282 > 193 Load_Cycle_Count 0x0012 > 100 100 000 Old_age > Always - > 282 > 194 Temperature_Celsius 0x0002 166 > 166 000 Old_age Always > - > 36 (Min/Max 17/50) > 196 Reallocated_Event_Count 0x0032 100 100 000 > Old_age Always > - 0 > 197 Current_Pending_Sector 0x0022 100 100 > 000 Old_age Always > - 0 > 198 Offline_Uncorrectable 0x0008 100 100 > 000 Old_age Offline > - 0 > 199 UDMA_CRC_Error_Count 0x000a 200 200 > 000 Old_age Always > - > 0 > SMART Error Log Version: 1 > ATA Error Count: 726 (device log contains only the most recent five > errors) > CR = Command Register > [HEX] > FR = Features Register > [HEX] > SC = Sector Count > Register [HEX] > SN = Sector Number > Register [HEX] > CL = Cylinder Low > Register [HEX] > CH = Cylinder High > Register [HEX] > DH = Device/Head Register > [HEX] > DC = Device Command > Register [HEX] > ER = Error register > [HEX] > ST = Status register > [HEX] > Powered_Up_Time is measured from power on, and printed as > DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, > SS=sec, and sss=millisec. It "wraps" after 49.710 days. > Error 726 occurred at disk power-on lifetime: 27182 hours (1132 days + > 14 hours) > When the command that caused the error occurred, the device > was active or idle. > After command completion occurred, registers were: > ER ST SC SN CL CH DH > -- -- -- -- -- -- -- > 40 51 81 af 5e b5 0a Error: UNC > at LBA = 0x0ab55eaf = 179658415 > Commands leading to the command that caused the error were: > CR FR SC SN CL CH DH DC > Powered_Up_Time Command/Feature_Name > -- -- -- -- -- -- -- -- ---------------- > -------------------- > 60 90 58 a0 5e b5 40 08 > 5d+04:35:24.617 READ FPDMA QUEUED > 60 00 50 00 6a 19 40 08 > 5d+04:35:24.616 READ FPDMA QUEUED > 60 00 48 e8 95 dc 40 08 > 5d+04:35:24.614 READ FPDMA QUEUED > 60 00 40 e8 94 dc 40 08 > 5d+04:35:24.613 READ FPDMA QUEUED > 60 00 38 e8 93 dc 40 08 > 5d+04:35:24.612 READ FPDMA QUEUED > Error 725 occurred at disk power-on lifetime: 26908 hours (1121 days + > 4 hours) > When the command that caused the error occurred, the device > was active or idle. > After command completion occurred, registers were: > ER ST SC SN CL CH DH > -- -- -- -- -- -- -- > 40 51 01 07 20 00 00 Error: UNC > at LBA = 0x00002007 = 8199 > Commands leading to the command that caused the error were: > CR FR SC SN CL CH DH DC > Powered_Up_Time Command/Feature_Name > -- -- -- -- -- -- -- -- ---------------- > -------------------- > 60 08 c0 00 20 00 40 08 > 00:04:40.671 READ FPDMA QUEUED > 60 08 b8 f0 5f 70 40 08 > 00:04:40.671 READ FPDMA QUEUED > 60 08 b0 80 5f 70 40 08 > 00:04:40.671 READ FPDMA QUEUED > 60 01 a8 00 00 00 40 08 > 00:04:40.634 READ FPDMA QUEUED > ea 00 00 00 00 00 a0 08 > 00:04:36.139 FLUSH CACHE EXT > Error 724 occurred at disk power-on lifetime: 24212 hours (1008 days + > 20 hours) > When the command that caused the error occurred, the device > was active or idle. > After command completion occurred, registers were: > ER ST SC SN CL CH DH > -- -- -- -- -- -- -- > 40 51 01 87 5f 70 04 Error: UNC > at LBA = 0x04705f87 = 74473351 > Commands leading to the command that caused the error were: > CR FR SC SN CL CH DH DC > Powered_Up_Time Command/Feature_Name > -- -- -- -- -- -- -- -- ---------------- > -------------------- > 60 08 c0 80 5f 70 40 08 > 00:04:31.080 READ FPDMA QUEUED > 60 01 b8 00 00 00 40 08 > 00:04:31.080 READ FPDMA QUEUED > 60 08 a8 00 20 00 40 08 > 00:04:30.932 READ FPDMA QUEUED > 60 08 98 08 20 00 40 08 > 00:04:30.931 READ FPDMA QUEUED > 60 08 90 00 20 00 40 08 > 00:04:30.927 READ FPDMA QUEUED > Error 723 occurred at disk power-on lifetime: 20433 hours (851 days + > 9 hours) > When the command that caused the error occurred, the device > was active or idle. > After command completion occurred, registers were: > ER ST SC SN CL CH DH > -- -- -- -- -- -- -- > 40 51 01 87 5f 70 04 Error: UNC > at LBA = 0x04705f87 = 74473351 > Commands leading to the command that caused the error were: > CR FR SC SN CL CH DH DC > Powered_Up_Time Command/Feature_Name > -- -- -- -- -- -- -- -- ---------------- > -------------------- > 60 08 58 80 5f 70 40 08 > 00:04:30.247 READ FPDMA QUEUED > 60 01 40 00 00 00 40 08 > 00:04:30.211 READ FPDMA QUEUED > ea 00 00 00 00 00 a0 08 > 00:04:27.877 FLUSH CACHE EXT > 61 08 28 c8 3f 70 40 08 > 00:04:27.877 WRITE FPDMA QUEUED > 61 08 20 c8 3d 70 40 08 > 00:04:27.877 WRITE FPDMA QUEUED > Error 722 occurred at disk power-on lifetime: 19224 hours (801 days + > 0 hours) > When the command that caused the error occurred, the device > was active or idle. > After command completion occurred, registers were: > ER ST SC SN CL CH DH > -- -- -- -- -- -- -- > 40 51 01 87 5f 70 04 Error: UNC > at LBA = 0x04705f87 = 74473351 > Commands leading to the command that caused the error were: > CR FR SC SN CL CH DH DC > Powered_Up_Time Command/Feature_Name > -- -- -- -- -- -- -- -- ---------------- > -------------------- > 60 08 60 80 5f 70 40 08 > 00:04:21.648 READ FPDMA QUEUED > 60 01 48 00 00 00 40 08 > 00:04:21.610 READ FPDMA QUEUED > ea 00 00 00 00 00 a0 08 > 00:04:21.322 FLUSH CACHE EXT > 61 08 38 30 3f 70 40 08 > 00:04:21.321 WRITE FPDMA QUEUED > 61 08 30 30 3d 70 40 08 > 00:04:21.321 WRITE FPDMA QUEUED > SMART Self-test log structure revision number 1 > No self-tests have been logged. [To run self-tests, use: smartctl -t] > SMART Selective self-test log data structure revision number 1 > SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS > 1 > 0 0 Not_testing > 2 > 0 0 Not_testing > 3 > 0 0 Not_testing > 4 > 0 0 Not_testing > 5 > 0 0 Not_testing > Selective self-test flags (0x0): > After scanning selected spans, do NOT read-scan remainder of disk. > If Selective self-test is pending on power-up, resume after 0 minute delay. > если я верно понял то вот подобная строчка говорит что с диском > все плохо > 1 Raw_Read_Error_Rate 0x000b 100 > 100 016 Pre-fail Always > - > 0
	Введите код, изображенный на картинке:

При общении не допускается: неуважительное отношение к собеседнику, хамство, унизительное обращение, ненормативная лексика, переход на личности, агрессивное поведение, обесценивание собеседника, провоцирование флейма голословными и заведомо ложными заявлениями. Не отвечайте на сообщения, явно нарушающие правила - удаляются не только сами нарушения, но и все ответы на них. Лог модерирования.

Партнёры:

Хостинг:

Закладки на сайте
Проследить за страницей

Created 1996-2024 by Maxim Chirkov
Добавить, Поддержать, Вебмастеру