Исходное сообщение
"Установка Solaris 9 (проблема с определением дисков)" Отправлено Strelok, 26-Янв-11 19:49
>> При установке система сканирует жесткие диски и... не находит их, выдает следующее: >> В чем трабла ? > Вообще говоря, видимо находит. Вот только partitioning там какой-то кривой возможно. После > того, как попали в shell, запустите format. Какой список дисков виден? > Если выбрать диск и посмотреть какие партишены есть (partition -> print), > то что получается? Спасибо за помощь. Вот, выхлоп: # format Searching for disks...WARNING: /pci@1c,600000/scsi@2/sd@0,0 (sd0):         Corrupt label; wrong magic number WARNING: /pci@1c,600000/scsi@2/sd@0,0 (sd0):         Corrupt label; wrong magic number WARNING: /pci@1c,600000/scsi@2/sd@1,0 (sd1):         Corrupt label; wrong magic number WARNING: /pci@1c,600000/scsi@2/sd@1,0 (sd1):         Corrupt label; wrong magic number done c1t0d0: configured with capacity of 68.49GB c1t1d0: configured with capacity of 68.49GB AVAILABLE DISK SELECTIONS:        0. c1t0d0 <FUJITSU-MBA3073NC-0102 cyl 33939 alt 2 hd 4 sec 1058>           /pci@1c,600000/scsi@2/sd@0,0        1. c1t1d0 <FUJITSU-MBA3073NC-0102 cyl 33939 alt 2 hd 4 sec 1058>           /pci@1c,600000/scsi@2/sd@1,0 Specify disk (enter its number): 0 selecting c1t0d0 [disk formatted] Disk not labeled.  Label it now? n FORMAT MENU:         disk       - select a disk         type       - select (define) a disk type         partition  - select (define) a partition table         current    - describe the current disk         format     - format and analyze the disk         repair     - repair a defective sector         label      - write label to the disk         analyze    - surface analysis         defect     - defect list management         backup     - search for backup labels         verify     - read and display labels         save       - save new disk/partition definitions         inquiry    - show vendor, product and revision         volname    - set 8-character volume name         !<cmd>     - execute <cmd>, then return         quit format> partition PARTITION MENU:         0      - change `0' partition         1      - change `1' partition         2      - change `2' partition         3      - change `3' partition         4      - change `4' partition         5      - change `5' partition         6      - change `6' partition         7      - change `7' partition         select - select a predefined table         modify - modify a predefined partition table         name   - name the current table         print  - display the current table         label  - write partition map and label to the disk         !<cmd> - execute <cmd>, then return         quit partition> print Current partition table (default): Total disk cylinders available: 33939 + 2 (reserved cylinders) Part      Tag    Flag     Cylinders         Size            Blocks   0       root    wm       0 -    61      128.12MB    (62/0/0)       262384   1       swap    wu      62 -   123      128.12MB    (62/0/0)       262384   2     backup    wu       0 - 33938       68.49GB    (33939/0/0) 143629848   3 unassigned    wm       0                0         (0/0/0)             0   4 unassigned    wm       0                0         (0/0/0)             0   5 unassigned    wm       0                0         (0/0/0)             0   6        usr    wm     124 - 33938       68.24GB    (33815/0/0) 143105080   7 unassigned    wm       0                0         (0/0/0)             0 partition> quit FORMAT MENU:         disk       - select a disk         type       - select (define) a disk type         partition  - select (define) a partition table         current    - describe the current disk         format     - format and analyze the disk         repair     - repair a defective sector         label      - write label to the disk         analyze    - surface analysis         defect     - defect list management         backup     - search for backup labels         verify     - read and display labels         save       - save new disk/partition definitions         inquiry    - show vendor, product and revision         volname    - set 8-character volume name         !<cmd>     - execute <cmd>, then return         quit format> disk AVAILABLE DISK SELECTIONS:        0. c1t0d0 <FUJITSU-MBA3073NC-0102 cyl 33939 alt 2 hd 4 sec 1058>           /pci@1c,600000/scsi@2/sd@0,0        1. c1t1d0 <FUJITSU-MBA3073NC-0102 cyl 33939 alt 2 hd 4 sec 1058>           /pci@1c,600000/scsi@2/sd@1,0 Specify disk (enter its number)[0]: 1 selecting c1t1d0 [disk formatted] Disk not labeled.  Label it now? n format> partition PARTITION MENU:         0      - change `0' partition         1      - change `1' partition         2      - change `2' partition         3      - change `3' partition         4      - change `4' partition         5      - change `5' partition         6      - change `6' partition         7      - change `7' partition         select - select a predefined table         modify - modify a predefined partition table         name   - name the current table         print  - display the current table         label  - write partition map and label to the disk         !<cmd> - execute <cmd>, then return         quit partition> print Current partition table (default): Total disk cylinders available: 33939 + 2 (reserved cylinders) Part      Tag    Flag     Cylinders         Size            Blocks   0       root    wm       0 -    61      128.12MB    (62/0/0)       262384   1       swap    wu      62 -   123      128.12MB    (62/0/0)       262384   2     backup    wu       0 - 33938       68.49GB    (33939/0/0) 143629848   3 unassigned    wm       0                0         (0/0/0)             0   4 unassigned    wm       0                0         (0/0/0)             0   5 unassigned    wm       0                0         (0/0/0)             0   6        usr    wm     124 - 33938       68.24GB    (33815/0/0) 143105080   7 unassigned    wm       0                0         (0/0/0)             0 partition>

Ваше сообщение
Имя*:
EMail:	Для отправки новых сообщений в текущей нити на email укажите знак ! перед адресом, например, !user@host.ru (!! - не показывать email). Более тонкая настройка отправки ответов производится в профиле зарегистрированного участника форума.
Заголовок*:
Сообщение*:	>>> При установке система сканирует жесткие диски и... не находит их, выдает следующее: >>> В чем трабла ? >> Вообще говоря, видимо находит. Вот только partitioning там какой-то кривой возможно. После >> того, как попали в shell, запустите format. Какой список дисков виден? >> Если выбрать диск и посмотреть какие партишены есть (partition -> print), >> то что получается? > Спасибо за помощь. > Вот, выхлоп: > # format > Searching for disks...WARNING: /pci@1c,600000/scsi@2/sd@0,0 (sd0): > Corrupt label; wrong magic > number > WARNING: /pci@1c,600000/scsi@2/sd@0,0 (sd0): > Corrupt label; wrong magic > number > WARNING: /pci@1c,600000/scsi@2/sd@1,0 (sd1): > Corrupt label; wrong magic > number > WARNING: /pci@1c,600000/scsi@2/sd@1,0 (sd1): > Corrupt label; wrong magic > number > done > c1t0d0: configured with capacity of 68.49GB > c1t1d0: configured with capacity of 68.49GB > AVAILABLE DISK SELECTIONS: > 0. c1t0d0 <FUJITSU-MBA3073NC-0102 cyl 33939 > alt 2 hd 4 sec 1058> > /pci@1c,600000/scsi@2/sd@0,0 > 1. c1t1d0 <FUJITSU-MBA3073NC-0102 cyl 33939 > alt 2 hd 4 sec 1058> > /pci@1c,600000/scsi@2/sd@1,0 > Specify disk (enter its number): 0 > selecting c1t0d0 > [disk formatted] > Disk not labeled. Label it now? n > FORMAT MENU: > disk > - select a disk > type > - select (define) a disk type > partition - select > (define) a partition table > current > - describe the current disk > format > - format and analyze the disk > repair > - repair a defective sector > label > - write label to the disk > analyze > - surface analysis > defect > - defect list management > backup > - search for backup labels > verify > - read and display labels > save > - save new disk/partition definitions > inquiry > - show vendor, product and revision > volname > - set 8-character volume name > !<cmd> > - execute <cmd>, then return > quit > format> partition > PARTITION MENU: > 0 > - change `0' partition > 1 > - change `1' partition > 2 > - change `2' partition > 3 > - change `3' partition > 4 > - change `4' partition > 5 > - change `5' partition > 6 > - change `6' partition > 7 > - change `7' partition > select - select a > predefined table > modify - modify a > predefined partition table > name - > name the current table > print - display > the current table > label - write > partition map and label to the disk > !<cmd> - execute <cmd>, > then return > quit > partition> print > Current partition table (default): > Total disk cylinders available: 33939 + 2 (reserved cylinders) > Part Tag Flag > Cylinders > Size > Blocks > 0 root > wm 0 - > 61 128.12MB > (62/0/0) 262384 > 1 swap > wu 62 - > 123 128.12MB (62/0/0) > 262384 > 2 backup wu > 0 - 33938 > 68.49GB (33939/0/0) 143629848 > 3 unassigned wm > 0 > 0 > (0/0/0) > 0 > 4 unassigned wm > 0 > 0 > (0/0/0) > 0 > 5 unassigned wm > 0 > 0 > (0/0/0) > 0 > 6 usr > wm 124 - 33938 > 68.24GB (33815/0/0) 143105080 > 7 unassigned wm > 0 > 0 > (0/0/0) > 0 > partition> quit > FORMAT MENU: > disk > - select a disk > type > - select (define) a disk type > partition - select > (define) a partition table > current > - describe the current disk > format > - format and analyze the disk > repair > - repair a defective sector > label > - write label to the disk > analyze > - surface analysis > defect > - defect list management > backup > - search for backup labels > verify > - read and display labels > save > - save new disk/partition definitions > inquiry > - show vendor, product and revision > volname > - set 8-character volume name > !<cmd> > - execute <cmd>, then return > quit > format> disk > AVAILABLE DISK SELECTIONS: > 0. c1t0d0 <FUJITSU-MBA3073NC-0102 cyl 33939 > alt 2 hd 4 sec 1058> > /pci@1c,600000/scsi@2/sd@0,0 > 1. c1t1d0 <FUJITSU-MBA3073NC-0102 cyl 33939 > alt 2 hd 4 sec 1058> > /pci@1c,600000/scsi@2/sd@1,0 > Specify disk (enter its number)[0]: 1 > selecting c1t1d0 > [disk formatted] > Disk not labeled. Label it now? n > format> partition > PARTITION MENU: > 0 > - change `0' partition > 1 > - change `1' partition > 2 > - change `2' partition > 3 > - change `3' partition > 4 > - change `4' partition > 5 > - change `5' partition > 6 > - change `6' partition > 7 > - change `7' partition > select - select a > predefined table > modify - modify a > predefined partition table > name - > name the current table > print - display > the current table > label - write > partition map and label to the disk > !<cmd> - execute <cmd>, > then return > quit > partition> print > Current partition table (default): > Total disk cylinders available: 33939 + 2 (reserved cylinders) > Part Tag Flag > Cylinders > Size > Blocks > 0 root > wm 0 - > 61 128.12MB > (62/0/0) 262384 > 1 swap > wu 62 - > 123 128.12MB (62/0/0) > 262384 > 2 backup wu > 0 - 33938 > 68.49GB (33939/0/0) 143629848 > 3 unassigned wm > 0 > 0 > (0/0/0) > 0 > 4 unassigned wm > 0 > 0 > (0/0/0) > 0 > 5 unassigned wm > 0 > 0 > (0/0/0) > 0 > 6 usr > wm 124 - 33938 > 68.24GB (33815/0/0) 143105080 > 7 unassigned wm > 0 > 0 > (0/0/0) > 0 > partition>
	Введите код, изображенный на картинке: