Исходное сообщение
"Базовая настройка Cisco 2911" Отправлено Наталья, 21-Авг-17 19:12
Тема конечно устарела) Но у меня тот же вопрос.... Собстно, упростила до нельзя! Но все равно инета нема ( hostname Router ! boot-start-marker boot-end-marker ! ! ! no aaa new-model ! no ipv6 cef ip source-route ip cef ! ! ! ! ! multilink bundle-name authenticated ! ! crypto pki token default removal timeout 0 ! ! license udi pid CISCO2911/K9 sn JTV1843TENK ! ! vtp mode transparent username cisco privilege 15 secret 4 vamdIKIiBV2LqIQVaEOJwBoFz6TK3UCPl8EwUHgHhK2 ! ! ! ! ! ! interface Embedded-Service-Engine0/0 no ip address shutdown ! interface GigabitEthernet0/0 description === LAN === ip address 192.168.1.1 255.255.255.0 ip accounting output-packets ip nat inside ip virtual-reassembly in duplex auto speed auto ! interface GigabitEthernet0/1 description === Internet === ip address 192.168.0.254 255.255.255.0 no ip redirects ip nat outside ip virtual-reassembly in ip verify unicast reverse-path duplex auto speed auto ! interface GigabitEthernet0/2 no ip address shutdown duplex auto speed auto ! ip forward-protocol nd ! no ip http server no ip http secure-server ! ip nat inside source list 1 interface GigabitEthernet0/0 overload ip route 0.0.0.0 0.0.0.0 192.168.0.1 ! access-list 1 permit any ! ! ! control-plane ! ! ! line con 0 line aux 0 line 2 no activation-character no exec transport preferred none transport input all transport output pad telnet rlogin lapb-ta mop udptn v120 ssh stopbits 1 line vty 0 4 login transport input all ! scheduler allocate 20000 1000 end чо не так то мать его не пингуется и все тут