Исходное сообщение
"Cisco 2801 100% CPU LOAD" Отправлено silvercaptain, 09-Фев-09 09:47
>Покажите: >sh int Tunnel118 sm-ptv-c2801#sh int tu 118 Tunnel118 is up, line protocol is up   Hardware is Tunnel   Description: Tun118 sm-c3660 10.84.253.14   Internet address is 10.84.239.214/30   MTU 1514 bytes, BW 9 Kbit/sec, DLY 500000 usec,      reliability 255/255, txload 56/255, rxload 170/255   Encapsulation TUNNEL, loopback not set   Keepalive not set   Tunnel source 10.84.253.14 (FastEthernet0/1), destination 10.250.84.100   Tunnel protocol/transport GRE/IP     Key disabled, sequencing disabled     Checksumming of packets disabled   Tunnel TTL 255   Fast tunneling enabled   Tunnel transmit bandwidth 8000 (kbps)   Tunnel receive bandwidth 8000 (kbps)   Last input 00:00:00, output 00:00:00, output hang never   Last clearing of "show interface" counters never   Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 55   Queueing strategy: fifo   Output queue: 0/0 (size/max)   30 second input rate 6000 bits/sec, 5 packets/sec   30 second output rate 2000 bits/sec, 4 packets/sec      944527 packets input, 291200592 bytes, 0 no buffer      Received 0 broadcasts, 0 runts, 0 giants, 0 throttles      0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort      896027 packets output, 120846521 bytes, 0 underruns      0 output errors, 0 collisions, 0 interface resets      0 unknown protocol drops      0 output buffer failures, 0 output buffers swapped out

Ваше сообщение
Имя*:
EMail:	Для отправки новых сообщений в текущей нити на email укажите знак ! перед адресом, например, !user@host.ru (!! - не показывать email). Более тонкая настройка отправки ответов производится в профиле зарегистрированного участника форума.
Заголовок*:
Сообщение*:	>>Покажите: >>sh int Tunnel118 > sm-ptv-c2801#sh int tu 118 > Tunnel118 is up, line protocol is up > Hardware is Tunnel > Description: Tun118 sm-c3660 10.84.253.14 > Internet address is 10.84.239.214/30 > MTU 1514 bytes, BW 9 Kbit/sec, DLY 500000 usec, > reliability 255/255, txload 56/255, rxload 170/255 > Encapsulation TUNNEL, loopback not set > Keepalive not set > Tunnel source 10.84.253.14 (FastEthernet0/1), destination 10.250.84.100 > Tunnel protocol/transport GRE/IP > Key disabled, sequencing disabled > Checksumming of packets disabled > Tunnel TTL 255 > Fast tunneling enabled > Tunnel transmit bandwidth 8000 (kbps) > Tunnel receive bandwidth 8000 (kbps) > Last input 00:00:00, output 00:00:00, output hang never > Last clearing of "show interface" counters never > Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 55 > Queueing strategy: fifo > Output queue: 0/0 (size/max) > 30 second input rate 6000 bits/sec, 5 packets/sec > 30 second output rate 2000 bits/sec, 4 packets/sec > 944527 packets input, 291200592 bytes, 0 no > buffer > Received 0 broadcasts, 0 runts, 0 giants, > 0 throttles > 0 input errors, 0 CRC, 0 frame, > 0 overrun, 0 ignored, 0 abort > 896027 packets output, 120846521 bytes, 0 underruns > 0 output errors, 0 collisions, 0 interface > resets > 0 unknown protocol drops > 0 output buffer failures, 0 output buffers > swapped out
	Введите код, изображенный на картинке: