Исходное сообщение
"cisco 800: не работает NAT" Отправлено aster, 02-Апр-09 10:24
>sho int fa0 >sho int fa0 switchport gwtest#sho int fa0 FastEthernet0 is up, line protocol is up   Hardware is Fast Ethernet, address is 0021.a03e.e81b (bia 0021.a03e.e81b)   MTU 1500 bytes, BW 100000 Kbit/sec, DLY 100 usec,      reliability 255/255, txload 1/255, rxload 1/255   Encapsulation ARPA, loopback not set   Keepalive set (10 sec)   Full-duplex, 100Mb/s   ARP type: ARPA, ARP Timeout 04:00:00   Last input never, output never, output hang never   Last clearing of "show interface" counters never   Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0   Queueing strategy: fifo   Output queue: 0/40 (size/max)   5 minute input rate 0 bits/sec, 0 packets/sec   5 minute output rate 0 bits/sec, 0 packets/sec      173 packets input, 17449 bytes, 0 no buffer      Received 106 broadcasts, 0 runts, 0 giants, 0 throttles      0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored      0 input packets with dribble condition detected      453 packets output, 34124 bytes, 0 underruns      0 output errors, 0 collisions, 2 interface resets      0 babbles, 0 late collision, 0 deferred      0 lost carrier, 0 no carrier      0 output buffer failures, 0 output buffers swapped out gwtest#sho int fa0 switchport Name: Fa0 Switchport: Enabled Administrative Mode: static access Operational Mode: static access Administrative Trunking Encapsulation: dot1q Operational Trunking Encapsulation: native Negotiation of Trunking: Disabled Access Mode VLAN: 1 (default) Trunking Native Mode VLAN: 1 (default) Trunking VLANs Enabled: ALL Trunking VLANs Active: 1 Protected: false Priority for untagged frames: 0 Override vlan tag priority: FALSE Voice VLAN: none Appliance trust: none

Ваше сообщение
Имя*:
EMail:	Для отправки новых сообщений в текущей нити на email укажите знак ! перед адресом, например, !user@host.ru (!! - не показывать email). Более тонкая настройка отправки ответов производится в профиле зарегистрированного участника форума.
Заголовок*:
Сообщение*:	>>sho int fa0 >>sho int fa0 switchport > gwtest#sho int fa0 > FastEthernet0 is up, line protocol is up > Hardware is Fast Ethernet, address is 0021.a03e.e81b (bia 0021.a03e.e81b) > MTU 1500 bytes, BW 100000 Kbit/sec, DLY 100 usec, > reliability 255/255, txload 1/255, rxload 1/255 > Encapsulation ARPA, loopback not set > Keepalive set (10 sec) > Full-duplex, 100Mb/s > ARP type: ARPA, ARP Timeout 04:00:00 > Last input never, output never, output hang never > Last clearing of "show interface" counters never > Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 > Queueing strategy: fifo > Output queue: 0/40 (size/max) > 5 minute input rate 0 bits/sec, 0 packets/sec > 5 minute output rate 0 bits/sec, 0 packets/sec > 173 packets input, 17449 bytes, 0 no > buffer > Received 106 broadcasts, 0 runts, 0 giants, > 0 throttles > 0 input errors, 0 CRC, 0 frame, > 0 overrun, 0 ignored > 0 input packets with dribble condition detected > 453 packets output, 34124 bytes, 0 underruns > 0 output errors, 0 collisions, 2 interface > resets > 0 babbles, 0 late collision, 0 deferred > 0 lost carrier, 0 no carrier > 0 output buffer failures, 0 output buffers > swapped out > gwtest#sho int fa0 switchport > Name: Fa0 > Switchport: Enabled > Administrative Mode: static access > Operational Mode: static access > Administrative Trunking Encapsulation: dot1q > Operational Trunking Encapsulation: native > Negotiation of Trunking: Disabled > Access Mode VLAN: 1 (default) > Trunking Native Mode VLAN: 1 (default) > Trunking VLANs Enabled: ALL > Trunking VLANs Active: 1 > Protected: false > Priority for untagged frames: 0 > Override vlan tag priority: FALSE > Voice VLAN: none > Appliance trust: none
	Введите код, изображенный на картинке: