The OpenNET Project / Index page

[ новости /+++ | форум | wiki | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

ctm_rmail ()
  • >> ctm_rmail (1) ( FreeBSD man: Команды и прикладные программы пользовательского уровня )

  • BSD mandoc
     

    NAME

    
    
    ctm_smail
    
     
    ctm_dequeue
    
     
    ctm_rmail
    
     - send and receive
    
    ctm(1)
    
    
    deltas via mail
     
    

    SYNOPSIS

    ctm_smail [-l log ] [-m maxmsgsize ] [-c maxctmsize ] [-q queue-dir ] ctm-delta mail-alias
    ctm_dequeue [-l log ] [-n numchunks ] queue-dir
    ctm_rmail [-Dfuv ] [-l log ] [-p piecedir ] [-d deltadir ] [-b basedir ] [file ... ]  

    DESCRIPTION

    In conjunction with the ctm(1) command, ctm_smail ctm_dequeue and ctm_rmail are used to distribute changes to a source tree via email. The ctm_smail utility is given a compressed ctm delta, and a mailing list to send it to. It splits the delta into manageable pieces, encodes them as mail messages and sends them to the mailing list (optionally queued to spread the mail load). Each recipient uses ctm_rmail (either manually or automatically) to decode and reassemble the delta, and optionally call ctm to apply it to the source tree. At the moment, several source trees are distributed, and by several sites. These include the Fx Ns -current source and CVS trees, distributed by freefall.FreeBSD.org

    Command line arguments for ctm_smail

    -l log
    Instead of appearing on stderr error diagnostics and informational messages (other than command line errors) are time stamped and written to the file log
    -m maxmsgsize
    Limit the maximum size mail message that ctm_smail is allowed to send. It is approximate since mail headers and other niceties are not counted in this limit. If not specified, it will default to 64000 bytes, leaving room for 1535 bytes of headers before the rumoured 64k mail limit.
    -c maxctmsize
    Limit the maximum size delta that will be sent. Deltas bigger that this limit will cause an apology mail message to be sent to the mailing list. This is to prevent massive changes overwhelming users' mail boxes. Note that this is the size before encoding. Encoding causes a 4/3 size increase before mail headers are added. If not specified, there is no limit.
    -q queue-dir
    Instead of mailing the delta pieces now, store them in the given directory to be mailed later using ctm_dequeue This feature allows the mailing of large deltas to be spread out over hours or even days to limit the impact on recipients with limited network bandwidth or small mail spool areas.

    ctm-delta is the delta to be sent, and mail-alias is the mailing list to send the delta to. The mail messages are sent using sendmail(8).

    Command line arguments for ctm_dequeue

    -l log
    Instead of appearing on stderr error diagnostics and informational messages (other than command line errors) are time stamped and written to the file log
    -n numchunks
    Limit the number of mail messages that ctm_dequeue will send per run. By default, ctm_dequeue will send one mail message per run.

    queuedir is the directory containing the mail messages stored by ctm_smail Up to numchunks mail messages will be sent in each run. The recipient mailing list is already encoded in the queued files.

    It is safe to run ctm_dequeue while ctm_smail is adding entries to the queue, or even to run ctm_smail multiple times concurrently, but a separate queue directory should be used for each tree being distributed. This is because entries are served in alphabetical order, and one tree will be unfairly serviced before any others, based on the delta names, not delta creation times.

    Command line arguments for ctm_rmail

    -l log
    Instead of appearing on stderr error diagnostics and informational messages (other than command line errors) are time stamped and written to the file log
    -p piecedir
    Collect pieces of deltas in this directory. Each piece corresponds to a single mail message. Pieces are removed when complete deltas are built. If this flag is not given, no input files will be read, but completed deltas may still be applied with ctm if the -b flag is given.
    -d deltadir
    Collect completed deltas in this directory. Deltas are built from one or more pieces when all pieces are present.
    -b basedir
    Apply any completed deltas to this source tree. If this flag is not given, deltas will be stored, but not applied. The user may then apply the deltas manually, or by using ctm_rmail without the -p flag. Deltas will not be applied if they do not match the .ctm_status file in basedir (or if .ctm_status does not exist).
    -D
    Delete deltas after successful application by ctm. It is probably a good idea to avoid this flag (and keep all the deltas) as ctm has the ability to recover small groups of files from a full set of deltas.
    -f
    Fork and execute in the background while applying deltas with ctm. This is useful when automatically invoking ctm_rmail from sendmail because ctm can take a very long time to complete, causing other people's mail to be delayed, and can in theory cause spurious mail retransmission due to the remote sendmail timing out, or even termination of ctm_rmail by mail filters such as MH's slocal. Do not worry about zillions of background ctm processes loading your machine, since locking is used to prevent more than one ctm invocation at a time.
    -u
    Pass the -u flag to the ctm command when applying the complete deltas, causing it to set the modification time of created and modified files to the CTM delta creation time.
    -v
    Pass the -v flag to the ctm command when applying the complete deltas, causing a more informative output. All ctm output appears in the ctm_rmail log file.

    The file arguments (or stdin if there are none) are scanned for delta pieces. Multiple delta pieces can be read from a single file, so an entire maildrop can be scanned and processed with a single command.

    It is safe to invoke ctm_rmail multiple times concurrently (with different input files), as might happen when sendmail is delivering mail asynchronously. This is because locking is used to keep things orderly.  

    FILE FORMAT

    Following are the important parts of an actual (very small) delta piece:
    From: owner-src-cur
    To: src-cur
    Subject: ctm-mail src-cur.0003.gz 1/4
    
    CTM_MAIL BEGIN src-cur.0003.gz 1 4
    H4sIAAAAAAACA3VU72/bNhD9bP0VByQoEiyRSZEUSQP9kKTeYCR2gDTdsGFAwB/HRogtG5K8NCj6
    v4+UZSdtUQh6Rz0eee/xaF/dzx8up3/MFlDkBNrGnbttAwyo1pxoRgoiBNX/QJ5d3c9/X8DcPGGo
    lggkPiXngE4W1gUjKPJCYyk5MZRbIqmNW/ASglIFcdwIzTUxaAqhnCPcBqloKEkJVNDMF0Azk+Bo
    dDzzk0Ods/+A5gXv9YyJHjMCtJwQNeESNma7hOmXDRxn
    CTM_MAIL END 61065
    

    The subject of the message always begins with ``ctm-mail'' followed by the name of the delta, which piece this is, and how many total pieces there are. The data are bracketed by ``CTM_MAIL BEGIN'' and ``CTM_MAIL END'' lines, duplicating the information in the subject line, plus a simple checksum.

    If the delta exceeds maxctmsize then a message like this will be received instead:

    From: owner-src-cur
    To: src-cur
    Subject: ctm-notice src-cur.0999.gz
    
    src-cur.0999.gz is 792843 bytes.  The limit is 300000 bytes.
    
    You can retrieve this delta via ftp.
    

    You are then on your own!  

    ENVIRONMENT

    If deltas are to be applied then ctm(1) and gunzip(1) must be in your PATH  

    FILES

    QUEUEDIR/*
    Pieces of deltas encoded as mail messages waiting to be sent to the mailing list.
    PIECEDIR/*
    Pieces of deltas waiting for the rest to arrive.
    DELTADIR/*
    Completed deltas.
    BASEDIR/.ctm_status
    File containing the name and number of the next delta to be applied to this source tree.

     

    EXIT STATUS

    The ctm_smail ctm_dequeue and ctm_rmail utilities return exit status 0 for success, and 1 for various failures. The ctm_rmail utility is expected to be called from a mail transfer program, and thus signals failure only when the input mail message should be bounced (preferably into your regular maildrop, not back to the sender). In short, failure to apply a completed delta with ctm is not considered an error important enough to bounce the mail, and ctm_rmail returns an exit status of 0.  

    EXAMPLES

    To send delta 32 of src-cur to a group of wonderful code hackers known to sendmail as src-guys limiting the mail size to roughly 60000 bytes, you could use:
    ctm_smail -m 60000 /wherever/it/is/src-cur.0032.gz src-guys
    

    To decode every ctm-mail message in your mailbox, assemble them into complete deltas, then apply any deltas built or lying around, you could use:

    ctm_rmail -p ~/pieces -d ~/deltas -b /usr/ctm-src-cur $MAIL
    

    (Note that no messages are deleted by ctm_rmail Any mail reader could be used for that purpose.)

    To create a mail alias called receiver-dude that will automatically decode and assemble deltas, but not apply them, you could put the following lines in your /etc/mail/aliases file (assuming the /ctm/tmp and /ctm/deltas directories and /ctm/log file are writable by user daemon or group wheel )

    receiver-dude: "|ctm_rmail -p /ctm/tmp -d /ctm/deltas -l /ctm/log"
    owner-receiver-dude: real_dude@wherever.you.like
    

    The second line will catch failures and drop them into your regular mailbox, or wherever else you like.

    To apply all the deltas collected, and delete those applied, you could use:

    ctm_rmail -D -d /ctm/deltas -b /ctm/src-cur -l /ctm/apply.log
    

    For maximum flexibility, consider this excerpt from a procmail script:

    PATH=$HOME/bin:$PATH
    
    :0 w
    * ^Subject: ctm-mail cvs-cur
    | ctm_incoming
    

    together with the shell script ~/bin/ctm_incoming

    #! /bin/sh
    PATH="$HOME/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin"
    export PATH
    
    cd $HOME/ctm && ctm_rmail -f -p pieces -d deltas -l log -b /ctm
    

    which will deposit all ctm deltas in ~/ctm/deltas apply them to the tree in /ctm and drop any failures into your regular mail box. Note the PATH manipulation in ctm_incoming which allows ctm_rmail to execute ctm(1) on the (non- Fx machine that this example was taken from. )  

    SECURITY

    On its own, CTM is an insecure protocol - there is no authentication performed that the changes applied to the source code were sent by a trusted party, and so care should be taken if the CTM deltas are obtained via an unauthenticated medium such as regular email. It is a relatively simple matter for an attacker to forge a CTM delta to replace or precede the legitimate one and insert malicious code into your source tree. If the legitimate delta is somehow prevented from arriving, this will go unnoticed until a later delta attempts to touch the same file, at which point the MD5 checksum will fail.

    To remedy this insecurity, CTM delta pieces generated by FreeBSD.org are cryptographically signed in a format compatible with the GNU Privacy Guard utility, available in /usr/ports/security/gpg, and the Pretty Good Privacy v5 utility, /usr/ports/security/pgp5. The relevant public key can be obtained by fingering ctm@FreeBSD.org.

    CTM deltas which are thus signed cannot be undetectably altered by an attacker. Therefore it is recommended that you make use of GPG or PGP5 to verify the signatures if you receive your CTM deltas via email.  

    DIAGNOSTICS

    In normal operation, ctm_smail will report messages like:
    ctm_smail: src-cur.0250.gz 1/2 sent to src-guys
    

    or, if queueing,

    ctm_smail: src-cur.0250.gz 1/2 queued for src-guys
    

    The ctm_dequeue utility will report messages like:

    ctm_dequeue: src-cur.0250.gz 1/2 sent
    

    The ctm_rmail utility will report messages like:

    ctm_rmail: src-cur.0250.gz 1/2 stored
    ctm_rmail: src-cur.0250.gz 2/2 stored
    ctm_rmail: src-cur.0250.gz complete
    

    If any of the input files do not contain a valid delta piece, ctm_rmail will report:

    ctm_rmail: message contains no delta
    

    and return an exit status of 1. You can use this to redirect wayward messages back into your real mailbox if your mail filter goes wonky.

    These messages go to stderr or to the log file. Messages from ctm(1) turn up here too. Error messages should be self explanatory.  

    SEE ALSO

    ctm(1), ctm(5)  

    AUTHORS

    An Stephen McKay Aq mckay@FreeBSD.org


     

    Index

    NAME
    SYNOPSIS
    DESCRIPTION
    FILE FORMAT
    ENVIRONMENT
    FILES
    EXIT STATUS
    EXAMPLES
    SECURITY
    DIAGNOSTICS
    SEE ALSO
    AUTHORS


    Поиск по тексту MAN-ов: 




    Спонсоры:
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2020 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру