The OpenNET Project / Index page

[ новости /+++ | форум | wiki | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

grotty ()
  • >> grotty (1) ( FreeBSD man: Команды и прикладные программы пользовательского уровня )
  • grotty (1) ( Linux man: Команды и прикладные программы пользовательского уровня )
  •  

    NAME

    grotty - groff driver for typewriter-like devices
     
    

    SYNOPSIS

    grotty [ -bBcdfhioruUv ] [ -Fdir ] [ files... ]

    It is possible to have whitespace between the -F option and its parameter.  

    DESCRIPTION

    grotty translates the output of GNU troff into a form suitable for typewriter-like devices. Normally grotty should be invoked by using the groff command with a -Tascii, -Tlatin1, -Tkoi8-r or -Tutf8 option on ASCII based systems, and with -Tcp1047 and -Tutf8 on EBCDIC based hosts. If no files are given, grotty will read the standard input. A filename of - will also cause grotty to read the standard input. Output is written to the standard output.

    By default, grotty emits SGR escape sequences (from ISO 6429, also called ANSI color escapes) to change text attributes (bold, italic, colors). This makes it possible to have eight different M[green]backgroundM[] and m[red]foregroundm[] colors; additionally, bold and italic attributes can be used BI]at the same time] (by using the BI font).

    The following colors are defined in tty.tmac: black, white, red, green, blue, yellow, magenta, cyan. Unknown colors are mapped to the default color (which is dependent on the settings of the terminal; in most cases, this is black for the foreground and white for the background).

    Use the -c switch to revert to the old behaviour, printing a bold character c with the sequence `c BACKSPACE c' and an italic character c by the sequence `_ BACKSPACE c'. At the same time, color output is disabled. The same effect can be achieved by setting either the GROFF_NO_SGR environment variable or using the `sgr' X command (see below).

    For SGR support, it is necessary to use the -R option of less(1) to disable the interpretation of grotty's old output format. Consequently, all programs which use less as the pager program have to pass this option to it. For man(1) in particular, either add -R to the $PAGER environment variable, e.g.

    PAGER=/usr/bin/less -R
    export PAGER

    or use the -P option of man to set the pager executable and its options, or modify the configuration file of man in a similar fashion.

    grotty's old output format can be displayed on a terminal by piping through ul(1). Pagers such as more(1) or less(1) are also able to display these sequences. Use either -B or -U when piping into less(1); use -b when piping into more(1). There is no need to filter the output through col(1) since grotty never outputs reverse line feeds.

    The font description file may contain a command

    internalname n

    where n is a decimal integer. If the 01 bit in n is set, then the font will be treated as an italic font; if the 02 bit is set, then it will be treated as a bold font. The code field in the font description field gives the code which will be used to output the character. This code can also be used in the [rs]N escape sequence in troff.  

    OPTIONS

    -b
    Suppress the use of overstriking for bold characters. Ignored if -c isn't used.
    -B
    Use only overstriking for bold-italic characters. Ignored if -c isn't used.
    -c
    Use grotty's old output format (see above). This also disables color output.
    -d
    Ignore all [rs]D commands. Without this grotty will render [rs]D'l...' commands that have at least one zero argument (and so are either horizontal or vertical) using -, |, and + characters.
    -f
    Use form feeds in the output. A form feed will be output at the end of each page that has no output on its last line.
    -Fdir
    Prepend directory dir/devname to the search path for font and device description files; name is the name of the device, usually ascii, latin1, koi8-r, utf8, or cp1047.
    -h
    Use horizontal tabs in the output. Tabs are assumed to be set every 8 columns.
    -i
    Use escape sequences to set the italic text attribute instead of the underline attribute for italic fonts (`I' and `BI'). Note that most terminals (including xterm) don't support this. Ignored if -c is active.
    -o
    Suppress overstriking (other than for bold or underlined characters in case the old output format has been activated with -c).
    -r
    Use escape sequences to set the reverse text attribute instead of the underline attribute for italic fonts (`I' and `BI'). Ignored if -c is active.
    -u
    Suppress the use of underlining for italic characters. Ignored if -c isn't used.
    -U
    Use only underlining for bold-italic characters. Ignored if -c isn't used.
    -v
    Print the version number.
     

    USAGE

    grotty understands a single X command produced using the [rs]X escape sequence.
    [rs]X'tty: sgr n'
    If n is non-zero or missing, enable SGR output (this is the default), otherwise use the old drawing scheme for bold and underline.
     

    ENVIRONMENT

    GROFF_NO_SGR
    If set, the old drawing scheme for bold and underline (using the backspace character) is active. Colors are disabled.
     

    FILES

    /usr/share/groff_font/devascii/DESC
    Device description file for ascii device.
    /usr/share/groff_font/devascii/F
    Font description file for font F of ascii device.
    /usr/share/groff_font/devkoi8-r/DESC
    Device description file for koi8-r device.
    /usr/share/groff_font/devkoi8-r/F
    Font description file for font F of koi8-r device.
    /usr/share/groff_font/devlatin1/DESC
    Device description file for latin1 device.
    /usr/share/groff_font/devlatin1/F
    Font description file for font F of latin1 device.
    /usr/share/groff_font/devutf8/DESC
    Device description file for utf8 device.
    /usr/share/groff_font/devutf8/F
    Font description file for font F of utf8 device.
    /usr/share/groff_font/devcp1047/DESC
    Device description file for cp1047 device.
    /usr/share/groff_font/devcp1047/F
    Font description file for font F of cp1047 device.
    /usr/share/tmac/tty.tmac
    Macros for use with grotty.
    /usr/share/tmac/tty-char.tmac
    Additional klugdey character definitions for use with grotty.

    Note that on EBCDIC hosts, only files for the cp1047 device will be installed.  

    BUGS

    grotty is intended only for simple documents.

    There is no support for fractional horizontal or vertical motions.

    There is no support for [rs]D commands other than horizontal and vertical lines.

    Characters above the first line (ie with a vertical position of~0) cannot be printed.

    Color handling is different compared to grops(1). [rs]M doesn't set the fill color for closed graphic objects (which grotty doesn't support anyway) but changes the background color of the character cell, affecting all subsequent operations.  

    SEE ALSO

    groff(1), troff(1), groff_out(5), groff_font(5), groff_char(7), ul(1), more(1), man(1), less(1)


     

    Index

    NAME
    SYNOPSIS
    DESCRIPTION
    OPTIONS
    USAGE
    ENVIRONMENT
    FILES
    BUGS
    SEE ALSO


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру