The OpenNET Project / Index page

[ новости /+++ | форум | wiki | теги | ]

Поиск:  Каталог документации | Mail

MH Frequently Asked Questions (FAQ) with Answers

This document answers Frequently Asked Questions about MH, a sophisticated mail interface. It should be read by new MH users and comp.mail.mh readers and before posting to this group.
Archive-name: mail/mh-faq/part1
Last-modified: $Date: 2001/07/23 06:33:32 $
Version: $Revision: 2001.07.2.1 $
Posting-Frequency: monthly

  This is a living list of frequently asked questions on the mailer
  user interface, Mail Handler, or MH.  The point of this is to
  circulate existing information, and avoid rehashing old answers.
  Better to build on top than start again.  Please read this document
  before ever posting to this newsgroup.

  This article is posted monthly.  If it has already expired and
  you're not reading this, you can hope that you saved the
  instructions to retrieve the FAQ (see "Where can I get MH") so that
  you can get a copy through other means.

  Please do not post an answer when someone posts a frequently asked
  question; rather, email the relevant section of the FAQ to eliminate
  unnecessary traffic in this newsgroup.

  This list depends on your comments, additions and fixes: please send
  them to Bill Wohler <wohler at newt.com>.

  Copyright 1991,1992,1993,1994,1995,1996,1997,1998,1999,2001 Bill Wohler

  Permission to use, copy, distribute, and translate this document for
  any non-commercial purpose is hereby granted, provided that this
  copyright notice appears in all copies.  Commercial distributions
  require prior written consent.

  This article is distributed in the hope that it will be useful,
  but WITHOUT ANY WARRANTY; without even the implied warranty of
  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

----------------------------------------------------------------------
  
Subject: Table of Contents
From: Bill Wohler <wohler at newt.com>
Date: Sat, 3 Mar 2001 11:29:16 -0800

Legend: + new, - deleted, ! changed
__________________

01.00 Introduction

 01.01 Why should I use MH?
 01.02 What is the current version/status of MH?
 01.03 Where can I get MH?
 01.04 What references exist for MH?
 01.05 What other MH software is available?
 01.06 How can I print a MH manual?
 01.07 How should I report bugs?
 01.08 How can I convert from my mailer to MH?
_________________

02.00 Building MH

 02.01 What machines does MH run on?
 02.02 How do I build MH?
 02.03 What options should I use?
 02.04 What do I need to do to use POP?
 02.05 Does MH support IMAP?
 02.06 Why does "mailgroup mail" only affect inc and not slocal?
 02.07 How can I build MH on Solaris 2?
 02.08 How can I build MH on Linux?
 02.09 How can I build MH on IRIX?
 02.10 How can I get MH to interpret the Content-Length field?
 02.11 How do I build MH on HP-UX?
 02.12 Can I prevent adding the local hostname to addresses behind firewalls?
 02.13 Is there a patch to fix this or that?
 02.14 How can I build MH on OS/2?
 02.15 Do any POP/IMAP servers handle MH format?
________________________

03.00 Scanning & Reading

 03.01 What do I do if scan shows the wrong date?
 03.02 How would one go about reading Usenet with MH?
 03.03 How can I search through multiple folders?
 03.04 Why don't MH format commands such as %(friendly) work?
 03.05 Why doesn't "show" display all of a MIME message?
 03.06 Can I get show not to run "less" so much on MIME messages?
 03.07 Why do I get "mhn: don't know how to display content"?
 03.08 How can I automatically delete MH backup files?
 03.09 Fixing "cannot fopen and lock /var/spool/mail/(user)".
 03.10 Can I read my mail with a Web browser?
 03.11 How can I run inc automatically with POP?
 03.12 Why does inc hang (on Sun)?
 03.12 How can I get POP to work?
 03.13 How do I persuade mhshow (mhn) not to bring up a new window?
 03.14 How do I turn off of all the mhshow (mhn) prompts?
 03.15 Why is inc splitting messages improperly?
 03.16 Can MH thread messages?
 03.17 How can I avoid reading the HTML version of the message?
 03.18 How do I view or save attachments?
 03.19 How do I view HTML attachments with Netscape?
____________

04.00 Filing

 04.01 Can I append MH messages to a Unix mailbox format file?
 04.02 Can I append MH messages to a GNU Emacs rmail BABYL-format file?
 04.03 Why do I get ".../.mh_sequences is poorly formatted?"
 04.04 How can you save News articles into an MH folder?
 04.05 Are there any good tools to archive MH messages?
 04.06 How can I remove duplicate messages?
 04.07 How can I remove holes in numbering?
__________________________

05.00 Composing & Replying

 05.01 Why does repl add a "Re:" to a message that already has one?
 05.02 How do I include messages in repl with or without ">"?
 05.03 How can I eliminate duplicate copies of letters to myself?
 05.04 How can I include my signature?
 05.05 How do I call my editor with arguments?
 05.06 How can I digestify messages in a folder for mail to another user?
 05.07 How can I change my return address?
 05.08 How can I change my From header?
 05.09 How can I save a copy of all messages I send?
 05.10 Can the folder in Fcc: be dynamically specified?
 05.11 Can I post secure/encryped mail?
 05.12 How can I send multi-media (MIME) attachments?
 05.13 What's the best way to send mail to a long list of people?
 05.14 What is the Dcc header?
 05.15 How can I make sense of the replcomps file?
 05.16 How can I convert quoted-printable to 8bit in quoted text in replies?
 05.17 Can I have aliases include aliases?
 05.18 Why doesn't mhmail understand aliases?
 05.19 How do I send blind carbon copies?
 05.20 When I forward a message, can I use its Subject?
 05.21 Why is the timezone field in my 'Date:' field wrong?
 05.22 Can I automate the comp -editor mhn process?
 05.23 How can I remove those "=20" characters when forwarding?
 05.24 Can I use mh-format substitution with forw?
_____________

06.00 Posting

 06.01 What to do with "Problems with edit - draft removed".
 06.02 Can I run my message through a program (e.g., ispell) before sending?
 06.03 What to do with "bad address 'xxx' - no at-sign after local-part".
 06.04 Fixing "post: problem initializing server; [BHST] no servers available"
 06.05 Fixing "post: problem initializing server; [RPLY] 503 Sender
       already specified"
 06.06 Fixing "post: unexpected response; [BHST] no socket opened"
 06.07 How do I fix the "X-Authentication-Warning" header?
 06.08 Fixing "post: unexpected response; [RPLY] 503 Need MAIL
       before RCPT"
 06.09 Fixing "post: problem initializing server; [BHST] premature
       end-of-file on socket"
 06.10 Fixing "Sender didn't use the HELO protocol"
 06.11 Fixing "post: problem initializing server; [RPLY] 553 Local
       configuration error, hostname not recognized as local
__________________

07.00 Mail Filters

 07.01 What mail filters are available?
 07.02 Why slocal writes messages to system mailbox that from(1) can't read.
 07.03 Where can I read about slocal and the format of .maildelivery?
 07.04 How do I debug my .maildelivery file?
 07.05 Why isn't slocal working?
 07.06 Are there any good biff applications for MH?
__________

08.00 mh-e

 08.01 I have a question about mh-e
_________

09.00 Xmh

 09.01 How can I get xmh to use Emacs as the editor?
 09.02 Does xmh support subfolders?
 09.03 How do I precede included messages with ">" when replying in xmh?
________

Appendix

 Glossary & Acknowledgments
 Switching xmh's editor
 babyl2mh.pl
 inco - babyl to MH converter
 +t2h - add hyperlinks to message viewed
 srvrsmtp.c patch
 IRIX config file
 HP-UX 10.20 config file
 Removing duplicate messages (Bourne)
 Removing duplicate messages (Perl)

------------------------------
  
Subject: Viewing This Article
From: Bill Wohler <wohler at newt.com>
Date: Mon, 27 Nov 1995 14:44:19 -0800

  To skip to a particular question with Subject or number xx, use
  "/^S.*xx" with most pagers.  In GNU Emacs type "M-C-s ^S.*xx", (or
  C-r to search backwards), followed by ESC to end the search.

  To skip to new or changed questions, use "/^S.*[!+]" with most pagers and
  "M-C-s ^S.*[!+]" in GNU Emacs.

  This article is in digest format.  nn may have already broken this
  message into separate articles; if not, then type "G %".  In rn, use
  ^G to skip sections.

  This article is treated as an outline when edited by GNU Emacs.  Run
  "M-x describe-mode" to see available outline-mode commands.  Useful
  commands are "M-x hide-body",  "C-c C-s" (show-subtree) and "M-x
  show-all"

  Check out the Usenet Hypertext FAQ Archive (see "What references
  exist for nn?"). Files available by ftp, man pages, and other Web
  pages, as well as cross-references like the one in this paragraph
  are just a click away.

  A "Date" field whose time is 00:00:00 is approximate.  The month and
  year in these fields represent the time they were added to the FAQ,
  rather than when they were contributed by the author, as is the case
  since November, 1995.

  If you should need the Internet address, use nslookup or dig if you
  have them, or send mail to <dns at grasp.insa-lyon.fr> with
  "help" for a Subject.

  References to $MHLIB refer to the directory that contains MH support
  files and routines. This directory is usually /usr/lib/mh or
  /usr/local/lib/mh (or /usr/local/nmh/lib or /etc/nmh for nmh). Do
  not use $MHLIB literally; use the real, absolute path to your MH
  library directory.

  There are slight differences between the original MH and nmh. In the
  text, the nmh command or filename is preferred, and the MH
  equivalent is placed in parenthesis. For example, the MH
  configuration is in $MHLIB/mts.conf (mtstailor); mhshow (mhn -show)
  is used to view attachments.

  Note that due to bottom feeding email address harvesting spam scum,
  mailto links have been removed and @s in addresses have been
  replaced by "at."
  
------------------------------

Subject: 01.00 ***** Introduction *****
From: Bill Wohler <wohler at newt.com>
Date: Fri, 1 Mar 1991 13:03:15 -0800

------------------------------

Subject: 01.01 Why should I use MH?
From: Jerry Peek <jpeek at jpeek.com>
Date: Fri, 1 Mar 1991 13:03:15 -0800

  The MH message handling system is a set of electronic mail programs
  in the public domain.  If your computer runs Unix, it can probably
  run MH.

  The big difference between MH and most other "mail user agents" is
  that you can use MH from a Unix shell prompt.  In MH, each command
  is a separate program, and the shell is used as an interpreter.  So,
  all the power of Unix shells (pipes, redirection, history, aliases,
  and so on) works with MH--you don't have to learn a new interface.
  Other mail agents have their own command interpreter for their
  individual mail commands (although the mush mail agent simulates a
  Unix shell).

  Because MH commands aren't part of a monolithic mail system, you can
  use them at any time; you don't have to start or quit the mail
  agent.  Because you use them from a shell prompt, you can use all
  the power of the shell.

  If your shell has time-saving aliases or functions (and most do),
  you'll be able to use them with MH, of course.  And because MH isn't
  a monolithic mail agent, you can use MH commands in Unix shell
  scripts, or call them from programs in high-level languages like C.

  Unlike most mail agents, MH keeps each message in a separate file.
  The filename is the message number.  To rearrange the messages, MH
  just changes the filenames.  MH can use standard Unix file system
  operations such as removing, copying and linking messages.  The
  message files are grouped into one or more folders, which are
  actually Unix directories.

  MH is free, powerful, flexible--and the basics are easy to learn.

------------------------------
  
Subject: 01.02 What is the current version/status of MH.
From: Bill Wohler <wohler at newt.com>
Date: Tue, 9 Feb 1999 22:49:18 -0800

  The current official version of MH is 6.8.3, although a beta of
  6.8.4 is available.

  This version includes MIME, a multi-media MH package that implements
  the new IETF work on Multi-media 822 (MIME).  This allows you to
  include things like audio, graphics, and the like, in your mail
  messages.  --Marshall Rose <mrose at dbc.mtview.ca.us>

  MH now works with Kerberos as well.

  In addition, a new program called mhparam extracts arguments from
  .mh_profile which is useful in shell scripts.

  Please see the file CHANGES in the distribution for more details. 

  Due to the languishing state of MH, Richard Coleman
  <coleman at math.gatech.edu> has created another version of MH called
  nmh (currently version 1.0.4). He uses GNU autoconf to ease
  installation considerably and has fixed several bugs and
  inconsistencies. See http://www.mhost.com/nmh/ and
  http://nmh.sourceforge.net/.

------------------------------
  
Subject: 01.03 Where can I get MH?
From: Bill Wohler <wohler at newt.com>
Date: Sun, 23 Nov 1997 13:07:47 -0800

  MH comes standard with:
  
	Berkeley Software Design BSD/386  . . . . MH 6.8.3
	Control Data Corp. CDC4680-MP . . . . . . EMH 1.4.2 (modified MH)
	Debian GNU/Linux 1.1  . . . . . . . . . . MH 6.8.4
	DEC Ultrix 3.1  . . . . . . . . . . . . . MH 6.5
	DEC Ultrix 4.2A.4 . . . . . . . . . . . . MH 6.7.1
	DEC OSF/1 . . . . . . . . . . . . . . . . MH 6.7
	Evans and Sutherland ES/OS 2.3  . . . . . MH 6.6
	FreeBSD . . . . . . . . . . . . . . . . . MH 6.8.4
	IBM PS/2 AIX 1.3  . . . . . . . . . . . . MH 6.4
	IBM RISC System/6000 AIX 3.x and 4.x  . . MH 6.6
	MIPS RISC/OS 4.52 . . . . . . . . . . . . MH 6.6
	Red Hat Linux (3.0.3, 4.0 and 4.1)  . . . MH 6.8.3
	SGI Irix 6.2 Freeware 2.0 CDROM . . . . . MH 6.8.3
	Sony NEWS-OS 4.3  . . . . . . . . . . . . MH 6.7.2
	Tektronix UTek  . . . . . . . . . . . . . MH (Version Unknown)
	Table maintained by: "James R. Hamilton" <jrh at interlog.com>

  If you should need the Internet address, use nslookup or dig if you
  have them, or send mail to <dns at grasp.insa-lyon.fr> with "help" for
  a Subject.

  via anonymous ftp:
    ftp://ftp.mhost.com/pub/nmh/nmh.tar.gz				667kB
    ftp://ftp.ics.uci.edu/pub/mh/mh-6.8.tar.Z				2MB
    ftp://ftp.uu.net/networking/mail/mh/mh-6.8.tar.Z			2MB
    ftp://ftp.efd.lth.se/pub/mail/mh-6.8.3.tar.gz			1.3MB
    ftp://ftp.ics.uci.edu/pub/mh/updates/MH.6.8.4.Z			46kB

  via mail:
    Send a note to either <mail-server at NL.net> or
    <archive-server at germany.eu.net> with a body containing the
    following:

      send mail/mh/mh-6.8.tar.Z

    UK users may be able to use <ftpmail at doc.ic.ac.uk>.  Send a
    note whose body contains "help" to this address.

    Send a note to <ftpmail at ftpmail.ramona.vix.com> whose body
    contains "help" on a line by itself get information on getting ftp
    sources by mail.

------------------------------
  
Subject: 01.04 What references exist for MH?
From: Bill Wohler <wohler at newt.com>
Date: Tue, 9 Feb 1999 22:51:40 -0800

  The Web:
    http://www.ics.uci.edu/~mh/
    http://www.mhost.com/nmh/
    http://nmh.sourceforge.net/
    http://mh-e.sourceforge.net/

  Books:
    MH & xmh: E-mail for Users & Programmers.  Third edition. Jerry
    Peek, with Bill Wohler and Brent Welch.
    ISBN 1-56592-093-7.  738 pages.
    O'Reilly & Associates, Inc.
    Out of print as of August, 1996.

    References to "the MH book" in this document refer to the third
    edition of this book (section numbers for the second edition
    appear in parentheses).  Links to the online edition are to the
    updated third edition at http://www.ics.uci.edu/~mh/book/.

    This book is also available online in the following locations:
    http://www.ics.uci.edu/~mh/book/ (western USA, Web)
    http://www.tac.nyc.ny.us/mirrors/mh-book/ (eastern USA, Web)
    http://www.fan.net.au/mirrors/freebooks/mh/ (Australia, Web)
    http://www.huygens.org/~eijk/mh_book/ (the Netherlands, Web)
    http://www.funet.fi/index/MH/book/ (Finland, Web)
    ftp://ftp.ics.uci.edu/pub/mh/book/index.htm (western USA, FTP)
    ftp://ftp.funet.fi/index/MH/book/index.htm (Finland, FTP)

    Examples from this book are in:
    ftp://ftp.uu.net/published/oreilly/nutshell/MHxmh/MHxmh3.tar.Z	114k
    ftp://ftp.ics.uci.edu/pub/mh/book/download/MHxmh3.tar.Z  (updated)  115k

    There is another book that contains a number of examples of
    advanced mail handing using MH as the example message handler.
    It's also quite a good reference on email in general.  

    The Internet Message.  Marshall T. Rose
    ISBN 0-13-092941-7.  396 pages.
    P T R Prentice Hall

  Papers:
    MHN Tutorial by Jerry Sweet
    ftp://ftp.ics.uci.edu/pub/mh/contrib/multimedia/mhn-tutorial.ps.Z	141k
    ftp://ftp.ics.uci.edu/pub/mh/contrib/multimedia/mhn-tutorial.tex.Z	48k

  Usenet:
    comp.mail.mh (gatewayed to MH-users)

  Mailing lists:
    General questions/discussion: <MH-users at ics.uci.edu>
    (gatewayed to comp.mail.mh).
    MH developers and maintainers: <MH-workers at ics.uci.edu>.
    Please use <MH-users-request at ics.uci.edu> and
    <MH-workers-request at ics.uci.edu> to request an addition or
    deletion.

    The mailing list for nmh is <nmh-workers at mhost.com>.
    Please use <nmh-workers-request at mhost.com> for
    subscription.

  MH-users archives:
    The files are in packf(1) format, compressed with compress(1).  To
    get them, use anonymous ftp and set "binary" transfer mode.

      current archive, uncompressed:
      ftp://ftp.ics.uci.edu/pub/mh/mh-users/mh-users.mbox

      ftp://ftp.ics.uci.edu/pub/mh/mh-users/mh-users.95.Z		1724k
      ftp://ftp.ics.uci.edu/pub/mh/mh-users/mh-users.95.scan.Z		113k
      ftp://ftp.ics.uci.edu/pub/mh/mh-users/mh-users.94.Z		1669k
      ftp://ftp.ics.uci.edu/pub/mh/mh-users/mh-users.94.scan.Z		57k
      ftp://ftp.ics.uci.edu/pub/mh/mh-users/mh-users.93.Z		1507k
      ftp://ftp.ics.uci.edu/pub/mh/mh-users/mh-users.93.scan.Z		51k
      ftp://ftp.ics.uci.edu/pub/mh/mh-users/mh-users.92.Z		1251k
      ftp://ftp.ics.uci.edu/pub/mh/mh-users/mh-users.92.scan.Z		43k
      ftp://ftp.ics.uci.edu/pub/mh/mh-users/mh-users.91.Z		858k
      ftp://ftp.ics.uci.edu/pub/mh/mh-users/mh-users.91.scan.Z		36k
      ftp://ftp.ics.uci.edu/pub/mh/mh-users/mh-users.90.Z		393k
      ftp://ftp.ics.uci.edu/pub/mh/mh-users/mh-users.90.scan.Z		21k
      ftp://ftp.ics.uci.edu/pub/mh/mh-users/mh-users.89.Z		89k
      ftp://ftp.ics.uci.edu/pub/mh/mh-users/mh-users.89.scan.Z		5k
      ftp://ftp.ics.uci.edu/pub/mh/mh-users/mh-users.88.Z		178k
      ftp://ftp.ics.uci.edu/pub/mh/mh-users/mh-users.88.scan.Z		11k
      ftp://ftp.ics.uci.edu/pub/mh/mh-users/mh-users.87.Z		54k
      ftp://ftp.ics.uci.edu/pub/mh/mh-users/mh-users.87.scan.Z		3k
      ftp://ftp.ics.uci.edu/pub/mh/mh-users/mh-users.86.Z		8k
      ftp://ftp.ics.uci.edu/pub/mh/mh-users/mh-users.86.scan.Z		771

    There are directions in ftp://ftp.ics.uci.edu/pub/mh/mh-users/README.
    Basically, you can use either "msh" or the individual commands
    "inc -file" to get the messages into a folder, and then "scan",
    "pick", "show", and so on (or your favorite commands in xmh, mh-e,
    etc.).  --Jerry Peek <jpeek at jpeek.com>

    Achim Bohnet <ach at rosat.mpe-garching.mpg.de> has created an
    excellent indexed version of the archive, plus some other archives
    besides.

      http://www.rosat.mpe-garching.mpg.de/mailing-lists/mh-users/
      http://www.rosat.mpe-garching.mpg.de/mailing-lists/exmh/
      http://www.rosat.mpe-garching.mpg.de/mailing-lists/procmail/
      http://www.rosat.mpe-garching.mpg.de/mailing-lists/mhonarc/

  This document:
    http://www.faqs.org/faqs/mail/mh-faq/part1/preamble.html
    http://www.cs.ruu.nl/wais/html/na-dir/mail/mh-faq/part1.html

  mh-e documentation:
    GNU Emacs 19.29 comes with a version of mh-e that now includes
    online (Texinfo) documentation.  Try "C-h i m mh-e RET".  It is
    also available online at http://www.ics.uci.edu/~mh/book/mh-e/.
    See also "What other MH software is available?" to see where you
    can get the latest version of mh-e which includes the
    documentation sources.

  exmh:
    The FAQ is available at http://www.beedub.com/exmh/exmh-faq.html.
    The online exmh sections from the MH book can be found at

      http://www.ics.uci.edu/~mh/book/exmh/tocs/jump.htm.

  Signature and Finger FAQ:
    http://www.faqs.org/faqs/usenet/signature-faq/

------------------------------
  
Subject: 01.05 What other MH software is available?
From: Stephen Gildea <gildea at stop.mail-abuse.org>, Bill Wohler <wohler at newt.com>
Date: Sat, 3 Mar 2001 13:39:01 -0800

  Mh-e is the GNU Emacs front end for MH. It offers all the
  functionality of MH, the visual orientation and simplicity of use of
  xmh, and full integration with Emacs, including thorough
  configurability. The command set is similar to that of rmail (the
  Emacs front end for BSD mail) and BSD mail itself. online help is
  available.

  Mh-e allows one to read and process mail very quickly: commands are
  single characters and completion and defaults are available for file
  and folder names. During a reply, the original message is displayed
  simultaneously in another window for easy reference where a mh-e
  command can quickly incorporate and format this text into your
  reply.

  With mh-e you compose outgoing messages in Emacs. This is a big plus
  for Emacs users, but it has been known for non-Emacs users to be
  able use mh-e after only learning the most basic cursor motion
  commands. Mh-e is easily configured via the Emacs edit-options menu,
  and can be configured to fit the needs of even the most demanding
  user.

  The GNU Emacs distribution includes mh-e.

  mh-e is maintained at SourceForge:

    http://mh-e.sourceforge.net/

From: Brent Welch <welch at acm.org>
Date: Tue, 20 Mar 2001 22:42:15 -0800

  EXMH is a user interface for the MH mail system written in TCL/TK.

  Exmh has MIME support, color feedback in the scan listing, a folder
  display with one label per folder, clever scan caching, facesaver
  bitmap display; background inc, various inc styles, searching over
  folder listing and message body, a dialog-box interface to MH pick,
  a simple built-in emacs-like editor, interfaces to other editors,
  user preferences, user hacking support. For more info or to obtain
  exmh, see:

    http://exmh.sourceforge.net/

From: "Eric D. Friedman" <friedman at hydra.acs.uci.edu>
Date: Tue, 9 Feb 1999 22:52:44 -0800

  Mhtake is a perl script that lets you add people to your mail
  aliases file by typing mhtake [message #].

    http://orion.oac.uci.edu/~friedman/mhtake.txt

From: Steinar Bang <sb at metis.no>
Date: Fri, 26 Jan 1996 13:51:08 +0100

  Mew (an Emacs interface to MH that has MIME and PGP capabilities) is
  found at:

    ftp://ftp.aist-nara.ac.jp/pub/elisp/Mew/mew-current.tar.gz

From: James Perkins <jamesp at sp-eug.com> 
Date: Fri, 1 Jan 1993 00:00:00 -0800

  Vmh is designed for people using the bulletin-board features of MH,
  where mail is stored in packed (single-file) folders. As a result,
  use of this program cannot be mixed with the use of normal MH
  commands. Vmh is a part of the official MH distribution.

From: James Perkins <jamesp at sp-eug.com>
Date: Fri, 1 Jan 1993 00:00:00 -0800

  Xmh is a X11 mouse-based MH browsing tool. It is very powerful and
  feature-filled and thus comes with a moderate learning curve. Its
  dependence on the X11 environment makes it very reconfigurable, but
  only by people well-versed in X applications programming. Its
  message reply built-in-editor interface is not always popular among
  those used to having MH bring up the editor of their choice.

Date: Fri, 1 Jan 1993 00:00:00 -0800

  xmh is part of the standard X Window System distribution from the X
  Consortium. Ultrix also ships dxmail which is similar.

    ftp://cs.utk.edu/pub/xmh.shar.Z					162k

From: Harald Tveit Alvestrand <hta at boheme.er.sintef.no>
Date: Fri, 1 Jan 1993 00:00:00 -0800

  Here's a version of xmh that includes MIME.

    ftp://aun.uninett.no/pub/mail/mixmh/mixmh-0.3.tar.Z			232k

From: Nathaniel Borenstein <nsb at thumper.bellcore.com>
Date: Sun, 26 Nov 1995 19:04:51 -0800

  Metamail is a package that can be used to convert virtually ANY
  mail-reading program on Unix into a multi-media mail-reading
  program. It is an extremely generic implementation of MIME
  (Multipurpose Internet Mail Extensions), the proposed standard for
  multi-media mail formats on the Internet. The implementation is
  extremely flexible and extensible, using a "mailcap" file mechanism
  for adding support for new data formats when sent through the mail.
  At a heterogeneous site where many mail readers are in use, the
  mailcap mechanism can be used to extend them all to support new
  types of multi-media mail by a single addition to a mailcap file.

  The metamail distribution comes complete with a small patch for each
  of over a dozen popular mail reading programs, including Berkeley
  mail, mh, Elm, Xmh, Xmail, Mailtool, Emacs Rmail, Emacs VM, Andrew,
  and others. Note that the MH patches are now integrated into MH 6.8.

    ftp://ftp.bellcore.com/pub/nsb/mm2.7.tar.Z

From: Tom Christiansen <tchrist at perl.com>
Date: Tue, 9 Feb 1999 22:55:24 -0800

  Plum is a highly configurable and extensible screen-oriented
  front-end for processing MH mail on ASCII terminals. Unlike mh-e,
  the extension language used in plum is perl, not LISP. Plum offers
  many of the advantages of xmh, but lacks several of xmh's
  disadvantages. The look&feel derives more from vi than from emacs.
  Key bindings and functions may be changed on the fly to suit the
  user's preference. It offers filename and word completion on folder,
  variables, and command names.

  Until it is included in the standard distribution (under
  miscellany), you can fiqnd a copy on:

    http://www.cpan.org/authors/Tom_Christiansen/scripts/plum.gz	29k

  or mail requests to Tom

From: Jerry Sweet <jsweet at irvine.com>
Date: Tue, 1 Nov 1994 00:00:00 -0800

  Mhunify is a set of perl scripts and templates that provides
  shell-level MH functionality with USENET news. Since MH supports
  MIME, MIME-format news articles just work. I've found that being
  able to handle news in the same way that I handle email is very
  useful, although there are some tradeoffs.

  Mhunify also treats MH folders just like news groups. If you
  subscribe to several mailing lists, and your email is automatically
  delivered to separate folders, say, via procmail or via MMDF's
  .maildelivery, the mhunify package lets you progress automatically
  through your folders just as you would news groups.

    ftp://ftp.ics.uci.edu/pub/mh/contrib/multimedia/mhunify.shar.gz

From: Dale Carstensen <dlc at c3file.c3.lanl.gov>
Date: Tue, 1 Nov 1994 00:00:00 -0800

  olmh is a demo for OLIT (Open Look Interface Toolkit, the Open Look
  wrapper to Xt) in Sun's Open Windows 3 that does handle 3rd and
  subsequent levels of nesting of folders.

  Obtain the Open Windows 3 distribution CD/ROM from Sun (SPARC only).
  To do this, call 1-800-USA-4SUN and send tone "2" for telemarketing
  after it answers. The 4.1.2 CD/ROM may also have Open Windows 3. The
  list price for the 4.1.2 CD/ROM is $200.

From: James Perkins <jamesp at sp-eug.com>
Date: Sun, 1 May 1994 00:00:00 -0800

  Vmail is a curses-based, vi-like message browser which calls on MH
  programs to manipulate mail. It can be used on almost any terminal.
  It organizes mail folders into index pages, from which a message can
  be selected to be shown, replied-to, forwarded, refiled, deleted,
  and so on. The vi-like interface and command keystrokes are
  comfortable to less-experienced Unix users, and it is a small,
  compact program, unlike the mh-e Emacs package.

  This version of vmail has been bugfixed and enhanced from the
  original vmail published on the net in 1987 by J. Zobel.

    ftp://ftp.uu.net/comp.sources.unix/volume12/vmail/part0*.Z		46k
    ftp://ftp.ucs.ubc.ca/pub/mh/vmail.[1-3]of3.Z			58k

  Or mail requests to James.

From: James Perkins <jamesp at sp-eug.com>
Date: Sun, 1 May 1994 00:00:00 -0800

  vmailtool may be for you if you have a Sun workstation. It is a
  button gadget panel for the above-mentioned vmail program. It brings
  vmail into the windows era where people no longer need to memorize
  specific command keystrokes. It also provides a mail icon with the
  flag that pops up when new mail arrives. Again, this is a compact,
  simple tool, unlike the powerful xmh program. Still, it's a welcome
  alternative for many people who are running SunView or OpenWindows.

    ftp://ftp.ucs.ubc.ca/pub/mh/vmailtool.Z				18k

  or mail requests to James.

  MMH, My Mail Handler, is a Motif interface for reading and sending
  mail. It uses the MH commands to actually handle sending a receiving
  messages. It does not support all the capabilities of MH, but offers
  a large enough subset to handle the majority of users. Its intended
  user is someone between "bumbling email novice" and "sophisticated
  user". Hooks are provided to allow the user to customize and add new
  commands.

    ftp://ftp.eos.ncsu.edu/pub/bill/bill.tar.Z				120k

From: Andrew Waugh <ajw at mel.dit.csiro.au>
Date: Fri, 1 Jan 1993 00:00:00 -0800

  X.500 lookups: If a name is enclosed in square brackets, when
  entering a destination address:

    To: [Greg Wickham,CSIRO]

  a search will be made in the X.500 Directory for the individual's
  entry. If an address exists then it will be extracted and placed
  into the headers. Mail requests for the software to the author.

From: Barbara Dyker <dyker at teal.csn.org>
Date: Fri, 1 Jan 1993 00:00:00 -0800

  QuemeMH is an email based service request and tracking system
  based on the Rand Mail Handler.

    ftp://ftp.cs.colorado.edu/pub/cs/sysadmin/utilities/queuemh.tar.Z   98k

From: <info at rootgroup.com>
Date: Mon, 1 Mar 1993 00:00:00 -0800

  Qmh is an MH-based group mail management tool. Written entirely in
  perl, Qmh combines the best aspects of MH with group mail heuristics
  and delivers a sensible package for all levels of Unix users. A
  limitless number of individual queues and associated groups of
  permitted users can be established.

  Specific functionality includes the following modes of operation;
  checking header dates and sending reminder/deadline mail, editing
  existing messages, help screens, creating new messages from scratch
  or exiting messages, resolving messages, scanning queue folders, and
  annotating with status both by editing and sending mail.

  Qmh is a single generic program in and of itself from which all
  modes of operation are invoked. Additionally, each separate queue
  may be accessed via a link to the single program. All system
  configuration is maintained in a single file that is read upon each
  invocation of Qmh. Formatting and template files are provided in the
  system library, although individual users can override the defaults
  simply by creating equivalent files in their own MH mail directory.

  Qmh provides a powerful database-like functionality by allowing
  limitless per-queue X-Qmh-<$value> headers to be included in
  messages. These "fields" then form the context of the queue messages
  and provide a user-defined, but yet structured environment for
  queries, reporting, and random information.

  Qmh is designed to provide a complete solution for SA groups, help
  desks, support organizations, or wherever two or more individuals
  are trying to manage multiple mail requests.

  Qmh is also compatible with versions of xmh that provide user-level
  command buttons. Provided in the Qmh package is a ~/.Xdefaults
  template file that's setup to harness the power of Qmh.

From: Jerry Peek <jpeek at jpeek.com>, Shannon Yeh <yeh at netix.com>
Date: Sun, 11 Mar 2001 00:23:21 -0800

  MacMH and PC/MH:
    These were available only for non-commercial degree-granting
    institutions from:

      Networking & Communication Systems
      115 Pine Hall
      Stanford University
      Stanford, CA 94305-4122
      Phone: +1 415-723-3909

    See also:
      ftp://netix.com/pub/pc-mh-info/*

    For more PC/MH info, contact:

      Netix Communications, Inc.
      15375 Barranca Parkway
      Building G, Suite 107
      Irvine, CA 92718
      Phone: +1 714-727-9532
      FAX:   +1 714-727-3922
      Internet: info at netix.com

    In addition, you might try Wollongong, to see if they have something you
    can get.

    [This information appears to be out of date.  Please send me
    pointers to valid information.  Potential sites include
    jessica.stanford.edu.]

    Two other potential methods to run MH under Windows: Run Unix
    under Windows with VMware (http://www.vmware.com/) or try to
    compile nmh with the Cygwin tools (http://www.cygwin.com/).

------------------------------
  
Subject: 01.06 How can I print a MH manual?
From: Bill Wohler <wohler at newt.com>, Jos Vos <jos at bull.nl>
Date: Mon, 9 Sep 1996 01:21:49 -0700

  First, check out the documents available on http://www.ics.uci.edu/~mh/.

  To order a copy by mail, see the section on how to get MH by mail
  (see "Where can I get MH?" and "What references exist for MH?").

  To print your own copy, first obtain the MH sources (see "Where can
  I get MH?") if you don't already have it.  Go into the "doc"
  directory and run "make guide" to create the administrators guide
  and "make manual" to create a user's manual which includes tutorials
  and man pages.  If the doc directory is empty or is missing the
  Makefile, you'll have to run "mhconfig MH" in the conf directory so
  that the documentation with correct local information is created.

  For properly formatting the documentation (at least the manual
  pages) you might even have to install MH, because a reference to a
  tmac.h file in the MH lib directory is made in the manual pages.

  You can also ftp the ASCII or postscript versions:

    ftp://ftp.ics.uci.edu/pub/mh/doc/tutorial.ps.Z			65k
    ftp://ftp.ics.uci.edu/pub/mh/doc/ADMIN.ps.Z				56k
    ftp://ftp.ics.uci.edu/pub/mh/doc/MH.ps.Z (man pages)		261k
    ftp://ftp.uu.net/networking/mail/mh/doc/tutorial.ps.Z
    ftp://ftp.uu.net/networking/mail/mh/doc/ADMIN.ps.Z
    ftp://ftp.uu.net/networking/mail/mh/doc/MH.ps.Z (man pages)

  Or, you can send a note to <mail-server at NL.net> with a body
  containing the following:

    send /mail/mh/papers-ps/tutorial.ps.Z

------------------------------
  
Subject: 01.07 How should I report bugs?
From: Bill Wohler <wohler at newt.com>
Date: Fri, 1 Mar 1991 13:03:15 -0800

  Mail them to <Bug-MH at ics.uci.edu> and be sure to include the
  output of the -help option as well as what hardware and operating
  system you are using.

  Bugs to nmh should be reported to <nmh-bugs at mhost.com>.

  Bugs in mh-e should be reported at:

    http://sourceforge.net/tracker/?atid=113357&group_id=13357&func=browse

------------------------------
  
Subject: 01.08 How can I convert from my mailer to MH?
From: Mike Sutton <mws115 at llcoolj.dayton.saic.com>
Date: 7 Jul 1995 10:03:50 GMT

  The unrmail function will convert rmail format to mbox format.

From: Jerry Peek <jpeek at jpeek.com>
Date: Fri, 1 Mar 1991 13:03:15 -0800

  If you use one of a mail agent like 'mail', 'mailx', 'elm' or
  'mush', converting to MH is easy.  When you run the 'inc' command,
  it reads all new messages from the system mailbox into your 'inbox'
  folder.  Those mail agents also have separate files or "folders"
  that hold messages in the same format as the system mailbox.  You
  can read them with the 'inc -file' command.  For example, to read
  the messages from your 'mbox' mail file into your MH 'inbox' folder,
  you'd type:

    % cd
    % cp mbox mbox.backup
    % inc -file mbox

  If you see the usual "Incorporating new mail into inbox..." message
  and a scan listing, the messages probably were converted.  Read some
  or all of them (with the 'show' command) and be sure.  The 'inc'
  won't remove your mbox unless you use '-truncate'.

From: "Jason R. Mastaler" <jason at Mastaler.COM>
Date: Mon, 1 May 1995 00:00:00 -0800

  You can also specify an alternate folder to inc.  Here's how you
  can convert all your folders en masse:

    for arg in `cat flist`; do
	echo "converting $arg"
	inc +"$arg" -file "$arg" -silent
    done

  Section D.4 of the MH book's second edition lists two scripts to
  convert mail files to MH folders: babyl2mh to convert from rmail's
  BABYL format; vmsmail2mh to convert from VMS's mail (see "What
  references exist for MH") to see where the book's examples can be
  ftped from).  These scripts aren't in the third edition but are in
  its archive file.

From: Vivek Khera <khera at cs.duke.edu>
Date: Fri, 1 Jan 1993 00:00:00 -0800

  I rewrote the above script in Perl since the original script doesn't
  work for some people (see "babyl2mh.pl" below).

From: Juergen Nickelsen <nickel at cs.tu-berlin.de>
Date: Fri, 1 Jan 1993 00:00:00 -0800

  You can remove the second to last second line ("> $input"), so
  that the script doesn't zero out your RMAIL file.

  Another alternative is to replace this line with "inc -file $tmpmbox
  $folder && > $input", so that the RMAIL is only zeroed if inc
  successfully incorporated the mail.  Finally one could add a switch
  -z, so that the RMAIL file is only zeroed if the switch is given.
  (See "Appendix inco".)

Date: Sun, 1 May 1994 00:00:00 -0800

  Use the following to convert a BABYL format file to Unix mail
  format.

    ftp://inf.informatik.uni-stuttgart.de/pub/gnu/emacs_extras/rmailtovm.el.Z
      6k

  See also MH book second edition (Appendix D).

------------------------------

Subject: 02.00 ***** Building MH *****
From: Bill Wohler <wohler at newt.com>
Date: Fri, 1 Mar 1991 13:03:15 -0800

------------------------------

Subject: 02.01 What machines does MH run on?
From: Bill Goffe <goffe at oswego.edu>
Date: 25 May 1999 18:13:55 GMT

  If you have Windows, consider looking at VMware

    http://www.vmware.com/
  
  which provides a virtual machine where you can run Unix and
  therefore MH under Windows.

From: Ted Nolan <ted at ags.ga.erg.sri.com>
Date: 24 May 99 17:20:27 GMT

  The latest Cygnus Cygwin, GNU tools that run under Windows,

    http://www.cygwin.com/
 
  seems to work pretty well and may well be able to build nmh.

From: Bill Wohler <wohler at newt.com>
Date: Sun, 8 Sep 1996 16:02:39 -0700

  MH isn't just for Unix any more.  Versions are reported to run on
  OS/2 also (see "How can I build MH on OS/2?").

From: Jerry Peek <jpeek at jpeek.com>
Date: Fri, 1 Mar 1991 13:03:15 -0800

  If you have a computer running Unix, you can probably run MH.

------------------------------
  
Subject: 02.02 How do I build MH?
From: Bill Wohler <wohler at newt.com>
Date: Sun, 8 Sep 1996 15:13:12 -0700

  If you're using Linux, you can simply install the nmh or MH package
  which is available in most distributions.

  If you want to build nmh, follow the directions in the file named
  INSTALL. Basically, it's simply "./configure; make; make install."

  If you have MH on the other hand, if you carefully read the file
  named READ-ME in the root of the source hierarchy, you should not
  have any trouble building MH.

  If you're having troubles building MH, it could be that the problem
  has already been fixed, but hasn't yet gotten into an official
  release.  Please see http://www.gw.com/mail/mh/patches/ for more info.

------------------------------
  
Subject: 02.03 What options should I use?
From: Bill Wohler <wohler at newt.com>
Date: Tue, 1 Dec 1992 00:00:00 -0800

  BERK: Do NOT include the BERK option (in versions 6.7 or later)!
  BERK breaks the mh-format functions that take apart address lines,
  for example mbox, from, and friendly.  This would really put a crimp
  on my replcomps file.

  LOCKF: if you have NFS, you need to lock your mailbox with lockf()
  so the lock will be honored by all machines on the local network.
  If you have the lockf() system call, include LOCKF.

  JQ Johnson <jqj at duff.uoregon.edu> makes the point that one
  should use this option carefully since it requires a robust lockf()
  call. For example, this option caused serious problems on his SunOS
  4.1.1. He suggested using LOK_BELL instead, and adding "lockstyle:
  1" to $MHLIB/mts.conf (mtstailor).

  ATZ: makes your timezones print like "EST" instead of "-0500".  Much
  prettier.  --Stephen Gildea <gildea at stop.mail-abuse.org>

  However, Tony Landells <ahl at technix.oz.au> replies: "Yes;
  very pretty.  How unfortunate that timezone names are so ambiguous,
  so that EST can be interpreted, at a minimum, as (American) Eastern
  Standard Time, (Australian) Eastern Standard Time, or (Australian)
  Eastern Summer Time (and yes, I think it's dumb having the same
  acronym for both normal and Summer time, but that's a different
  problem).  While the numeric timezones may not look as nice, they
  are, at least, reasonably unambiguous.  I would urge anyone who ever
  intends/hopes/expects to use email outside the U.S. to NOT use ATZ
  (sorry Stephen)."

  At any rate, the conf/examples directory has been updated and
  contains many examples show you which options are required on your
  platform and which are optional (in the upcoming version MH 6.8).  At
  any rate, it is recommended that you examine the options in the
  example configuration files, and read about them in READ-ME.

  RPATHS: a side-effect is that slocal writes messages to your system
  maildrop without the MMDF C-A's that separate messages, so your BSD
  tools like from work.

------------------------------
  
Subject: 02.04 What do I need to do to use POP?
From: Bill Wohler <wohler at newt.com>
Date: Sun, 8 Sep 1996 23:31:01 -0700

  MH6.7 (and earlier versions too) include a server for version 3 of POP.

From: Morgan Fletcher <morgan at tupelo.best.com>
Date: 14 Mar 1996 19:24:23 -0800

  Ensure that /etc/services contains the following:

      pop2	109/tcp		postoffice	# POP version 2
      pop2	109/udp
    ->pop	110/tcp		# POP version 3 (MH's inc thinks it's "pop")
    ->pop	110/udp
      pop3	110/tcp		# POP version 3
      pop3	110/udp

  Also compile with the POP options: POP, DPOP, RPOP, etc.

From: Richard Coleman <coleman at math.gatech.edu>
Date: 06 Feb 1997 03:43:17 -0500

  To get MH to use the pop3 service, add POPSERVICE=pop3 to your MH
  configuration and recompile:

------------------------------
  
Subject: 02.05 Does MH support IMAP?
From: Lyndon Nerenberg <lyndon at MessagingDirect.COM>
Date: 27 Jul 1999 11:33:39 -0600

  Run exmh on the laptop, and modify your .mh_profile to inc using
  APOP. This is how I run mh-e and it works fine. (I did have to
  modify mh-e a wee bit to allow it to prompt for the password. You
  would likely have to do something similar with exmh.)

  As a spare time project I'm adding enough IMAP support to MH (6.8.3)
  to allow you to 'inc -imap [-imapfolder foo]'. If I ever get this
  done I'll stick the diffs up somewhere. (It's not a big priority as
  I can get at my IMAP INBOX using APOP.)

From: Tim Showalter <tjs at andrew.cmu.edu>, John Prevost <visigoth at cs.cmu.edu>
Date: Wed, 25 Sep 1996 21:34:56 -0400

  We are developing fmh and intend to support as much of MH as is
  feasible.  However, MH and IMAP don't necessarily agree as to what
  things are going to look like.  MH has static message numbers until
  you pack a folder; IMAP keeps two numbers on a message, one which is
  absolutely static and one which is relative to the top of a mailbox.
  Messages in IMAP are essentially immutable.  IMAP doesn't
  (currently) allow message annotations.  fmh will keep state with a
  background daemon instead of writing it to disk, and will probably
  try and keep as little on disk as possible.

  fmh doesn't understand MH folders at the moment, and probably won't
  for a really long time, if ever.  As I said before, we're mostly
  interested in the IMAP aspects as we're using a networked file
  system and saving stuff on the local disk just isn't an option.

  fmh is not MH at a very fundamental level.  It is very unlikely that
  it will be merged, as we're not quite as interested in creating
  something that is MH and IMAP as we are in writing a good IMAP
  client.  Also, the MH code isn't going to take the introduction of
  IMAP without a near complete rewrite.

  It is not available yet.  Inquiries are welcome at
  <tjs+fmh at andrew.cmu.edu>.

From: Rahul Dhesi <dhesi at rahul.net>
Date: 23 Sep 1996 08:39:52 GMT

  What prevents people from doing a telnet to their mail server,
  logging in, and firing up MH directly?  Site policy?  An operating
  system that does not let MH compile or run?  Overloaded machine with
  insufficient processing power for MH?  All these are site-specific
  problems and the solution lies in solving them locally, not in
  forcing MH to go over IMAP.

  IMAP was never designed to emulate a filesytem.  MH was designed to
  make direct advantage of the filesytem structure.  There is no
  compatibility between the two.  By the time IMAP is revised enough
  to support MH you will have reinvented NFS.

  There *is* scope for redesign here, though.  It would be nice to
  have a single-user filesystem.  Create a binary telnet session to
  the filesystem server, log in as yourself, and then over that
  session run a filesystem protocol.  Normal filesystem protections at
  the other end will be sufficient for all permissions checking, so
  the filesystem protocol would need to do no other permissions
  checking.  The question of whom to export directories to would go
  away: They are exported to whoever completes a successful login, and
  accessible to the user if he would be able to access them on the
  server as his login id.  You could even use challenge-response for
  the initial login, coupled with ssh-based encryption, so you
  automatically have a secure filesystem without even trying.

  IMAP is too restricted in its scope to be easily modifiable to
  emulate such a filesystem.  It would have to be a redesign from
  scratch.

From: John Romine <jromine at ics.uci.edu>
Date: Sun, 8 Sep 1996 15:45:27 -0700

  No.  MH only supports retrieving mail using POP3.  POP3 is on the
  "standards track"--it is now an elective Internet Draft Standard
  (see RFC 1938 for more details).  At this point, IMAP[23] are
  "experimental, limited use" protocols; it is unlikely that MH will
  support them.

From: Bill Wohler <wohler at newt.com>
Date: Sun, 8 Sep 1996 15:45:32 -0700

  Since John posted the message above, IMAP has progressed from an
  "experiemental, limited use" protocol.  While IMAP is not universal,
  many vendors now have implementations.

  I've found several things which might help.  First, a definition
  lifted from the Pine FAQ:

  What is IMAP?

  IMAP stands for "Internet Message Access Protocol".  An IMAP client
  program on any platform at any location on the Internet can access
  email folders on an IMAP server.  While the messages appear to be
  local, they reside on the server until the client explicitly moves
  or deletes them.  The IMAP protocol is a superset of POP, containing
  all POP commands plus more.  For a comparison of IMAP and POP, see
  the paper Comparing Two Approaches to Remote Mailbox Access: IMAP
  vs. POP (in ftp.cac.washington.edu:/mail/imap.vs.pop).  IMAP is what
  allows Pine (or any other IMAP client) to get to email on a central
  campus email server.  There are current IETF working groups revising
  IMAP and readying it to become an Internet standard. A copy of the
  latest IMAP draft may be obtained from:
  
    ftp://ftp.cac.washington.edu/mail/latest-imap-draft

  For a list of IMAP clients, see the file imap.software, in the same
  directory.

From: David L Miller <dlm at cac.washington.edu>
Date: Mon, 1 Aug 1994 00:00:00 -0800

  ipop3d from the UW IMAP toolkit can operate in a couple modes.  As a
  straight POP3 server, it uses the same C-client library as imapd, so
  it co-exists comfortably with imapd.  It can also operate as a
  POP-to-IMAP gateway so that your POP-only clients can access IMAP
  services.

    ftp://ftp.cac.washington.edu/mail/imap.tar.Z			1.0M

From: Mark Crispin <MRC at Panda.COM>
Date: Mon, 1 Aug 1994 00:00:00 -0800

  The only answer I can give for [how MH users can use IMAP] is that
  Pine can read mailboxes in MH format; and that someone might in the
  future develop a version of MH that can use IMAP.

------------------------------
  
Subject: 02.06 Why does "mailgroup mail" only affect inc but not slocal?
From: John Romine <jromine at ics.uci.edu>
Date: Fri, 1 Jan 1993 00:00:00 -0800

  If "mailgroup" is set, inc is made set-group-id to this group name.
  Some SYS5 systems want this to be set to "mail".  Set this if
  /usr/spool/mail (or /usr/mail) is not world-writable.  These
  changes were contributed by Peter Marvit, and "inc" is very careful
  about its use of the set-gid privilege.

  Note that slocal doesn't know how to deal with this, and will not
  work under these systems; just making it set-group-id will open a
  security hole (since it doesn't know when to drop the set-gid
  privileges).  If you're using "mailgroup", you should remove slocal
  (and its man page) from your system.

  Alternatives to slocal include deliver, procmail, and mailagent.
  (See "What mail filters are available?")

------------------------------
  
Subject: 02.07 How can I build MH on Solaris 2?
From: Richard Coleman <coleman at math.gatech.edu>
Date: Tue, 20 Jan 1998 02:19:58 -0500
  
  nmh builds out of the box on Solaris.

From: Bill Wohler <wohler at newt.com>
Date: Sun, 8 Sep 1996 15:56:31 -0700

  See http://www.gw.com/mail/mh/patches/solaris/ for patches you may need.

From: Neil Rickert <rickert at cs.niu.edu>,
	Scott K. Hutton <shutton at habanero.ucs.indiana.edu>,
	Casper H.S. Dik <casper at fwi.uva.nl>
Date: Sun, 8 Sep 1996 15:57:25 -0700

  First, don't use the BSD compatible stuff.  Make sure that the Sun
  or GNU compiler appear before the BSD compiler in your PATH (e.g.,
  /usr/ccs/bin).

  Second, don't use GNU make.  Make sure that the Sun make appears
  before the GNU make in your PATH.

  Use conf/examples/solaris2.sun.com and fix the paths, if necessary.
  Optionally change the following to use the GNU compiler, to perform
  optimization, and to create shared libraries.

    cc              gcc
    ccoptions       -O -g -msupersparc
    slflags         -shared

  Fix mhn.c with the diff in

    http://www.gw.com/mail/mh/patches/solaris/si_value_2.3.

  Optionally incorporate the Content-Length header fix.  (See "How can
  I get MH to interpret the Content-Length field?")

  Linking with /usr/ucblib/libucb.so is incompatible with including
  <dirent.h>.

  When compiling, you can ignore the following warning:

    fmtcompile.c", line 238: warning: semantics of "/" change in ANSI C;
    use explicit cast

  If you're using AFS, you'll have to replace any occurrence of "ln"
  with "ln -s" wherever the make dies when it tries to make a link
  "on a different file system."

  See also ftp://ftp.fwi.uva.nl/pub/solaris/solaris2.faq.

Date: Thu, 1 Dec 1994 00:00:00 -0800

  Unset LD_LIBRARY_PATH.

From: Gary Strand <strandwg at ncar.ucar.edu>
Date: Mon, 1 May 1995 00:00:00 -0800

  To cure slocal's Segmentation Fault problems, I decided to try 'cc'
  instead of 'gcc' (an alleged no-no under Solaris) and MH built just
  fine, and it's working perfectly.

From: "Jason R. Mastaler" <jason at Mastaler.COM>
Date: Mon, 25 Sep 1995 17:35:13 -0400

  Don't use "ldoptions -s" with gcc.  It may cause the compile to fail
  with:

    gcc: Internal compiler error: program ld got fatal signal 11
    *** Error code 1

From: "Jeffrey T. Eaton" <jeaton at galt.com>
Date: Fri, 04 Apr 1997 15:30:36 GMT

  Fixed [DBM_PAGFNO_NOT_AVAILABLE error] by getting the latest gdbm
  package, compiling and installing it and the dbm/ndbm compatability
  stuff, and moving Sun's broken ndbm.h out of /usr/include.

  To fix "../sbr/libmh.so: undefined reference to
  `__builtin_va_arg_incr'", add "option __BUILTIN_VA_ARG_INCR" to your
  MH configuration.

------------------------------
  
Subject: 02.08 How can I build MH on Linux?
From: Richard Coleman <coleman at math.gatech.edu>
Date: Tue, 20 Jan 1998 02:19:58 -0500

  nmh should build out of the box for most Linux systems.

From: Bill Wohler <wohler at newt.com>
Date: Tue, 9 Feb 1999 23:04:53 -0800

  The Debian distribution of Linux comes with an MH and nmh packages.  See

    http://www.debian.org/.

  See also http://www.gw.com/mail/mh/patches/linux/.

From: "James A. Robinson" <jimr at simons-rock.edu>
Date: 17 Apr 96 20:39:02 GMT

  Somebody on Debian ported it to Linux ELF.  Look on
  ftp://ftp.debian.org/debian/stable/binary/mail/mh_6.8.4-13.deb for
  the .deb package of MH (it's a compressed tar file).  The source is
  in ftp://ftp.debian.org/debian/stable/source/mail/mh_6.8.4-orig.tar.gz
  and mh_6.8.4-13.diff.gz.

From: Brian Kirouac <bri at psa.pencom.com>
Date: 18 Apr 96 14:00:20 GMT

  If you are running Redhat and have rpm available you can also use
  ftp://???/pub/redhat-3.0.3/i386/RedHat/RPMS/mh-6.8.3-5.i386.rpm.
  The source code is in
  ftp://???/pub/redhat-3.0.3/i386/SRPMS/mh-6.8.3-5.i386.rpm

From: "Brandon S. Allbery" <bsa at kf8nh.wariat.org>
Date: Sun, 26 Nov 1995 16:18:50 -0800

  The current patch is the first one listed below.  The old patch only
  works with libc-4.4, which is no longer used.  The current patch is
  split into two pieces, as with the previous patch, but now the
  divisions are purely functional: the first diff enables MH to
  compile, the second allows creation of a shared library. [Ed: The
  paths are up to date, but I think the info in this paragraph is
  old.]

  Recent versions of GNU make choke on MH's makefiles.  Unfortunately,
  the shared library patches depend on "export".  If you have problems
  building MH, remove the "export" lines from all of the makefiles (if
  you applied the shared library patches) and try using BSD pmake
  instead.

  If you don't want to compile MH, the second file contains
  pre-compiled ready-to-run binaries which can simply be extracted in
  the root directory.

    ftp://sunsite.unc.edu/pub/Linux/system/Mail/readers/mh-6.8.3-diffs.tar.gz
    ftp://sunsite.unc.edu/pub/Linux/system/Mail/readers/mh-6.8.3-bin.tar.gz

  The sizes are 650k and 22k respectively.

  Note that these files are occasionally "cleaned up" by accident so
  please let me know if they are missing.

------------------------------
  
Subject: 02.09 How can I build MH on IRIX?
From: Richard Coleman <coleman at math.gatech.edu>
Date: Tue, 20 Jan 1998 02:19:58 -0500

  nmh should build out of the box for Irix.

From: Bill Wohler <wohler at newt.com>
Date: Sun, 8 Sep 1996 15:33:22 -0700

  See http://www.gw.com/mail/mh/patches/sgi/ for patches you may need.

From: Arne K. Frick <frick at info.uni-karlsruhe.de>
Date: 06 Jun 1995 18:30:01 GMT

  There is a file at viz.tamu.edu:/pub/sgi (see FAQ) containing a diff
  and sample configuration.  If you cannot locate it, I can mail it to
  you.  Note, however, that I had tremendous difficulties with them
  under 5.3:

  1. Be sure to use /bin/make, NOT GNU make.
  2. patch vomits over the diff.  You can get around this by increasing the
     "fuzz factor" to 4.
  3. The Makefile target for the shared library doesn't work.  I had to do it
     by hand.

  But I'm stuck compiling mhn.c.

From: Shankar Unni <shankar at sgi.com>
Date: 9 Jun 1995 01:53:48 GMT

  The fix for compiling mhn.c is in

    http://www.gw.com/mail/mh/patches/solaris/si_value_2.3.

From: Jack Repenning <jackr at informix.com>
Date: 25 Jul 1995 02:35:41 GMT

  (See "IRIX config file") below.

------------------------------
  
Subject: 02.10 How can I get MH to interpret the Content-Length field?
From: Casper H.S. Dik <Casper.Dik at Holland.Sun.COM>
Date: Sun, 8 Sep 1996 15:38:30 -0700

  Apply http://www.gw.com/mail/mh/patches/solaris/content_length to
  your MH distribution and add the configuration option
  "CONTENT_LENGTH".  It also includes the si_ fix in

    http://www.gw.com/mail/mh/patches/solaris/si_value_2.3

------------------------------
  
Subject: 02.11 How can I build MH on HP-UX?
From: Bill Wohler <wohler at newt.com>
Date: Sun, 8 Sep 1996 15:50:54 -0700

  If you find that your zotnet/tws directory isn't compiling, upgrade
  your MH (see "What is the current version/status of MH?") which
  includes fixes to lexedit.sed.

  See http://www.gw.com/mail/mh/patches/hp/ for for patches you may need.

------------------------------
  
Subject: 02.12 Can I prevent adding the local hostname to addresses behind firewalls?

From: Ted Remillard <tedr at hood.sd.com>
Date: 24 Jun 1996 08:53:42 -0700

  You can get MH to stop managing the headers and let the email server
  to do it. To do this, build MH with the options DUMB and REALLYDUMB.
  In the $MHLIB/mts.conf (mtstailor) file, set the server option to
  the IP address of the email server. After this is done, MH sends
  email directly to the email server and Local email To: and From:
  fields just have the user's simple email address, e.g., <fred>, and
  the remote email From: header will contain user@domainname, e.g.,
  <fred@sd.com>.

  Don't forget to define the REALLYDUMB option in the file
  sbr/addrsbr.c described below.

From: Bret Rothenberg <bretr at endeavour.exar.com>
Date: Tue, 23 Jan 1996 12:25:24 -0800 (PST)

  Yes, use the "localname" parameter in "$MHLIB/mts.conf" (mtstailor)
  to specify the desired hostname.

From: Ken Hornstein <kenh at cmf.nrl.navy.mil>
Date: 18 Aug 1995 23:51:48 -0400

  If you're behind a firewall and sendmail gives you fits because MH
  adds the node name or site name to each address in the To: and CC:
  fields, you'll need to modify the MH source.

  The relevant source has to do with the REALLYDUMB option in
  sbr/addrsbr.c.  Essentially what you need to do is set it up so
  REALLYDUMB is turned on (normally, it's turned off if you have MMDF
  or SMTP turned on).  This will do what you want.  I did this at our
  site, and it's been working great.  The stuff for REALLYDUMB starts
  around line 613.

------------------------------
  
Subject: 02.13 Is there a patch to fix this or that?
From: Kimmo Suominen <kim at tac.nyc.ny.us>
Date: Sat, 3 Mar 2001 13:40:35 -0800

  The MH Patch Archive has been opened at

    http://www.gw.com/mail/mh/patches/
    ftp://ftp.gw.com/mail/mh/patches/

  It is a collection of patches to MH (the RAND MH Message Handling
  System), a set of electronic mail programs in the public domain.
  Since the last complete release of MH (version 6.8.3) UNIX systems
  have evolved making changes in the MH code necessary.  Several new
  UNIX systems have emerged requiring new configuration templates and
  examples.  This archive tries to collect all these fixes and
  enhancements that in the past have been available only through
  word-of-mouth and occasional reposts to newsgroups or mailing lists.

  The initial archive layout and the very time consuming collecting
  and categorizing of patches has been done by Jerry Peek.

  I will be the primary maintainer of the archive. Even though I will
  be monitoring several sources for new material (mainly the
  comp.mail.mh newsgroup but also the mailing lists
  <mh-workers at ics.uci.edu>, <mh-e-users at lists.sourceforge.net> and
  <exmh-workers at redhat.com>), I'd like to encourage everyone to submit
  patches also directly to the archive at <mh-archive at gw.com>.

------------------------------
  
Subject: 02.14 How can I build MH on OS/2?
From: Sanjay Aiyagari <sanjay at sandbox.snetnsa.com>
Date: 21 Nov 1996 19:37:10 GMT

    ftp://ftp.jaist.ac.jp/pub/os/os2/network/MH/

------------------------------
  
Subject: 02.15 Do any POP/IMAP servers handle MH format?
From: "Carl S. Gutekunst" <csg at eng.sun.com>
Date: 27 May 1997 07:24:34 GMT

  The University of Washington POP3 and IMAP servers can be backended
  by a variety of stores, including MH.  This is the basis for
  Netscape's store, curiously enough. I haven't looked closely at how
  Mark Crispin implemented support for the new IMAP4 features when
  using an MH backend; it seems like there is a lot of computation
  when opening a folder for the first time, writing in the UID fields
  and such.  But it basically appears to work.

From: Lyndon Nerenberg <lyndon at MessagingDirect.COM>
Date: 27 Jul 1999 11:36:25 -0600

  But [the UW IMAP server] can't delete/expunge from MH folders. (At
  least I've never been able to get it to work, and I've tried just
  about everything.) #mh in UW imapd isn't something I'd recommend to
  any serious MH user.

From: Mark Crispin <mrc at CAC.Washington.EDU>
Date: Tue, 27 Jul 1999 14:43:25 -0700

  > But it can't delete/expunge from MH folders.

  That's a very old version. delete/expunge has been in imap-4.x for a
  long while. However, there's no sticky flags.

  > #mh in UW imapd isn't something I'd recommend to any serious MH user.

  The converse is also true. The two don't play ball very well.

------------------------------

Subject: 03.00 ***** Scanning & Reading *****
From: Bill Wohler <wohler at newt.com>
Date: Fri, 1 Mar 1991 13:03:15 -0800

------------------------------

Subject: 03.01 What do I do if scan shows the wrong date?
From: Bill Wohler <wohler at newt.com>
Date: Fri, 1 Jan 1993 00:00:00 -0800

  Upgrade to MH 6.8 or nmh.

From: Darryl Okahata <darrylo at sr.hp.com>
Date: 19 Jan 2000 23:01:10 -0800

  MH 6.8.3 and nmh 1.0 still have a minor buglet where sortm doesn't
  always sort messages properly. If a (questionable) mail client sends
  messages with 2-digit years, like:

    Date: Sat, 23 Oct 09 22:02:01 EST

  or sends out buggy dates like (as buggy versions of Elm do):

    Date: Sat, 23 Oct 100 22:02:01 EST

  then sortm will not sort these messages properly.

  I have submitted patches to nmh-workers.

------------------------------
  
Subject: 03.02 How would one go about reading Usenet with MH?
From: Bill Wohler <wohler at newt.com>
Date: Sun, 26 Nov 1995 12:32:09 -0800

  You can post via mail.  Send your article to
  <mail2news at news.demon.co.uk> with a legitimate Newsgroups
  field.

From: Jerry Peek <jpeek at jpeek.com>
Date: Tue, 1 Nov 1994 00:00:00 -0800

  You can save articles in the news readers for later perusal with MH.

  First, create a symbolic link from your mail directory (e.g., usenet) to
  your news directory (e.g., "ln -s ~/News ~/Mail/usenet").  You can then
  treat your news directory as a mail folder.  Thus, to select a news
  group, use "folder +usenet/comp/mail/mh".

  To set the default save location correctly in rn, use:

    rn -M -/

  or in your nn presentation sequence:

    news.announce.		+$F/$N
    comp.mail.mh		+
    .
    .

  If there's news spooled on your machine (that is, not via NNTP) then
  you can read a newsgroup with commands like:

    show first +/usr/spool/news/comp/mail/mh
    next
    ...

  You can also use sequences to keep track of what you've read.  MH
  will automatically set a "cur" sequence in each newsgroup you read
  that way.  So, to continue reading the newsgroup sometime later,
  after you've read some other folder, you can do:

    next +/usr/spool/news/comp/mail/mh

  and you'll read the next (new) article (if any) in that newsgroup.

  Note that this can eventually make your private context file pretty
  huge; if there's a group you don't read often, you can remove its
  context entries with a command like:

    rmf +/usr/spool/news/comp/mail/mh

  Don't try that on a folder full of mail (a folder that isn't
  read-only), though... in that case, it'll remove all the messages!

  I haven't looked into posting.  It seems like it shouldn't be hard.
  You could set up a "sendproc" that would look at outgoing email
  messages.  If the message had a Newsgroups: header field, your
  sendproc could call inews(1) instead of post(8).  I haven't seen
  much in the MH manpages or documentation about sendprocs (though I
  haven't looked for a couple of years...).  See the "mysend"
  script in the MH book section 7.1.4 (13.13), or the URL:

    http://www.ics.uci.edu/~mh/book/mh/senove.htm#ASAtDm

  A threaded news reader like trn or tin is so much nicer, though,
  that reading news with MH may not be worth the hassle.

  See also MH book section 9.9 (8.7), or the URL:

    http://www.ics.uci.edu/~mh/book/mh/shafol.htm

From: Stephen Gildea <gildea at stop.mail-abuse.org>
Date: Fri, 1 Mar 1991 13:03:15 -0800

  Although news readers are better, if one really wants to use
  MH, bbc will do the job.  For example, "bbc comp.mail.mh" reads this
  newsgroup.  To enable bbc, you have to specify "bboards" when you
  build MH.

From: Kimmo Suominen <kim at tac.nyc.ny.us>
Date: 15 Aug 1996 18:18:10 GMT

  Sendmail v8 comes with MAILER(pop) which was written for the MH
  spop.  Since I use bboards with NNTP, I never looked at the bboards
  setup.

Date: Tue, 1 Nov 1994 00:00:00 -0800

  See mhunify in (see also "What other MH software is
  available?").

------------------------------
  
Subject: 03.03 How can I search through multiple folders?
From: Jerry Peek <jpeek at jpeek.com>
Date: Mon, 1 Mar 1993 00:00:00 -0800

  Recurse through the folders (in csh and sh):

  % foreach f (`folders -f`)		$ for f in `folders -f`
  ? pick [switches] +$f			> pick [switches] +$f
  ? end					> done

  Or create a folder that contains links to all messages (in csh and sh):

    % foreach f (`folders -f | grep -v -x ln`)
    ? refile -src +$f -link all +ln
    ? end

    $ for f in `folders -f | grep -v -x ln`
    > do refile -src +$f -link all +ln
    > done

  and in the future, refile messages with "refile +folder +ln".  To
  find something, use:

    % pick [switches] +ln

  See MH book sections 8.2.9 (7.2.9), 8.9.3 (7.8.3), or the URLs:

    http://www.ics.uci.edu/~mh/book/mh/finpic.htm#SeMTOnFo
    http://www.ics.uci.edu/~mh/book/mh/usilin.htm#AFoFuoLi

------------------------------
  
Subject: 03.04 Why don't MH format commands such as %(friendly) work?
From: Anthony Baxter <anthony at aaii.oz.au>
Date: Sun, 1 May 1994 00:00:00 -0800

  The BERK option disables address parsing and therefore functions
  such as %(friendly).  Recompile MH without the BERK option.

------------------------------
  
Subject: 03.05 Why doesn't "show" display all of a MIME message?
From: Jerry Peek <jpeek at jpeek.com>
Date: Mon, 1 Aug 1994 00:00:00 -0800

  It's not the fault of the "show" command or of MH in general. It's
  your system's configuration. Check the $MHLIB/mhn.defaults
  (mhn_defaults) file; if it doesn't have defaults for all content
  types, add them. Or, if you can't (or shouldn't) change mhn.defaults
  (mhn_defaults), you can put default entries in your MH profile file
  for those content types.

  Here's the part of the mhshow(1) (mhn(1)) manpage that explains how
  content types are handled. The example is for mhshow, but if you're
  using mhn, you'd replace mhshow with mhn:

    First, mhshow will look for an entry of the form:

      mhshow-show-<type>/<subtype>

    to determine the command to use to display the content.  If this
    isn't found, mhshow will look for an entry of the form:

      mhshow-show-<type>

    to determine the display command.  If this isn't found, mhshow has
    two default values:

      mhshow-show-text/plain: %pmoreproc '%F'
      mhshow-show-message/rfc822: %pshow -file '%F'

    If neither apply, mhshow will check to see if the message has a
    application/octet-stream content with parameter "type=tar". If so,
    mhshow will use an appropriate command. If not, mhshow will
    complain.

  So, add defaults that cover the types MH doesn't handle right now
  (or doesn't handle the way you want it to). Your defaults will
  override corresponding defaults in the $MHLIB/mhn.defaults
  (mhn_defaults) file. For example, if you don't have an HTML
  editor/browser on your system, you could tell MH to use the "less"
  paginator for HTML message parts:

    mhshow-show-text/x-html: less %F

  You can put that line in your MH profile.

  You can even set different defaults for different terminal types
  (say, your VT100 at home and your X setup at work). Make a file in
  the same format as mhn.defaults (mhn_defaults); store its pathname
  in the MHSHOW (MHN) environment variable. Add a test to your shell
  setup file (.bash_profile, .profile, .login) that tests the value of
  the TERM variable -- and, if you have an mhshow (mhn) setup file for
  that terminal type, store its pathname in the MHSHOW (MHN) variable.

  See also MH book sections 6.2.3, 9.4.4, 9.4.5, or the URLs:

    http://www.ics.uci.edu/~mh/book/mh/remime.htm#HomhShMe
    http://www.ics.uci.edu/~mh/book/mh/confmhn.htm#ShComhsh
    http://www.ics.uci.edu/~mh/book/mh/confmhn.htm#DiOChSmc

From: Michael K. Neylon <mneylon at engin.umich.edu>
Date: Tue, 1 Nov 1994 00:00:00 -0800

  If you are not using the X Window System, you may have to add this
  line to your MH profile:

    mhshow-charset-iso-8859-1: /bin/sh -c '%s'			# nmh
    mhn-charset-iso-8859-1: /bin/sh -c '%s'			# MH

------------------------------
  
Subject: 03.06 Can I get show not to run "less" so much on MIME messages?
From: Richard Coleman <coleman at math.gatech.edu>
Date: Tue, 20 Jan 1998 02:19:58 -0500

  On nmh, you can do this just by "show -nocheckmime".  This will disable
  the detection of MIME messages.

From: Bill Wohler <wohler at newt.com>
Date: Tue, 1 Nov 1994 00:00:00 -0800

  If you say, "show all," and one of the messages was a MIME message,
  your pager will be run several times on each message, rather than
  once on all the messages as a whole.  If you find this annoying, set
  the environment variable NOMHNPROC:

    % setenv NOMHNPROC ""			# csh
    $ NOMHNPROC=				# sh and bash
    $ export NOMHNPROC

  See also MH book sections 6.2.3, 6.2.10, or the URLs:

    http://www.ics.uci.edu/~mh/book/mh/remime.htm#HomhShMe
    http://www.ics.uci.edu/~mh/book/mh/remime.htm#Alttomhn

------------------------------
  
Subject: 03.07 Why do I get "mhn: don't know how to display content"?
From: Richard Coleman <coleman at math.gatech.edu>
Date: Tue, 20 Jan 1998 02:19:58 -0500

  This has already been fixed in nmh.

From: Keith Moore <moore at cs.utk.edu>
Date: Sun, 8 Sep 1996 15:49:50 -0700

  MH 6.8.3 has a bug where it will not handle multipart/foo correctly
  if it doesn't know about foo. The patch:

    http://www.gw.com/mail/mh/patches/all/mhn_multipart
 
  tells it to treat such things as if they were multipart/mixed.

  (See also "Why doesn't "show" display all of a MIME message?").

------------------------------
  
Subject: 03.08 How can I automatically delete MH backup files?
From: mccammaa at expt05.stp.xfi.bp.com (Andy McCammont)
Date: 22 May 1995 06:27:36 -0400

  On System V system, add this to your crontab.  If you don't have
  one, put this in a file, and run "crontab file".  If your system
  does not support personal crontab files, get your system
  administrator to add an equivalent line to the system crontab file
  or daily clean-up script.  Note that some administrators set the
  prefix character to '#'.

    # Remove old MH files
    5 5 * * * find /PATH/TO/HOME/Mail -name ",*" -mtime +5 -exec rm {} \;

------------------------------
  
Subject: 03.09 Fixing "cannot fopen and lock /var/spool/mail/(user)".
From: Patrick.Wambacq at esat.kuleuven.ac.be
Date: Mon, 30 Sep 96 15:00:16 +0200

  One should put the following lines in the $MHLIB/mts.conf
  (mtstailor) file:

    lockldir:
    lockstyle: 1

  This prevents MH from using kernel level locking, and uses lock
  files instead.  It solved the problem for me on two different
  architectures.  When the lockldir entry is left empty as above, the
  lock file is put in the same directory as the file to be locked. If
  another directory is wanted, its name should be put here.

From: alhy at MAILBOX.SLAC.Stanford.EDU
Date: Mon, 9 Sep 1996 01:01:16 -0700

  Often, this is caused by an NFS file lock.  Don't ask me how it got
  there in the first place.  To remove the file lock, do the following:

    # cd /var/spool/mail
    # cp user /tmp/user.tmp; rm user	# save mail; remove locked file
    # chown user /tmp/user.tmp		# allow user to inc old mail
    # su - user
    user% inc -file user.tmp		# incorporate user's old mail

  Any mail that you receive in the fraction of a second that the second
  set of commands takes will be lost.

  (See also "Why does inc hang (on Sun)?")

------------------------------
  
Subject: 03.10 Can I read my mail with a Web browser?
Date: Mon, 05 Oct 1998 11:02:52 -0500
From: Kent Landfield <kent at nfr.net>

  Hypermail now supports MIME and alternate mailbox formats and sorts
  by author, date, and thread and can be read by a WWW reader.

    http://www.landfield.com/hypermail/

From: "Patrick A. Coronato" <coronato at me216.teb.allied.com>
Date: 8 Sep 1995 16:36:03 GMT

  MHonArc, by Earl Hood from Convex, will read MH mailboxes as well as
  Unix mailboxes, create HTML "archives" and will also sort by date,
  thread and author and has support for MIME.  Also, MHonArc is
  written in the Perl (version 4) language.  (You should go to this
  site if nothing more than to see the cool logo!)

    http://www.oac.uci.edu/indiv/ehood/mhonarc.html

------------------------------
  
Subject: 03.11 How can I run inc automatically with POP?
From: Bill Wohler <wohler at newt.com>
Date: Mon, 27 Nov 1995 12:23:51 -0800

  If MH has been compiled with RPOP, then the POP server host either
  needs to have your host in /etc/hosts.equiv or in your .rhosts file.
  Then add to your MH profile:

    inc: -host cuckoo

  given that "cuckoo" is the name of the your POP server.

From: Andy Norman <ange at hplb.hpl.hp.com>
Date: Mon, 1 May 1995 00:00:00 -0800

  Assuming your POP server is called cuckoo, add an entry to your MH
  profile for 'inc' like so:

    inc: -noaudit -norpop -noapop -host cuckoo

  Add the following to ~/.netrc and ensure it is readable only by you
  (e.g., chmod 600 .netrc):

    machine cuckoo.domain.name login joeuser password secret

  Replace the hostname, login and password with your own, of course.
  The hostname probably has to be fully qualified (i.e., include the
  full domain name).  This example assumes that you can send mail by
  other means (e.g., with SMTP).

------------------------------
  
Subject: 03.12 Why does inc hang (on Sun)?
From: ericding at mit.edu (Eric J. Ding)
Date: 30 Apr 1996 00:22:01 -0400

  This may be due to a non-robust implementation of lockf() over NFS.
  Try setting lockstyle to 1 in the $MHLIB/mts.conf (mtstailor) file
  so that MH uses dotfile locking rather than FLOCK or LOCKF.

------------------------------
  
Subject: 03.12 How can I get POP to work?
From: Jonathan George <jmg at hpopd.pwd.hp.com>
Date: Tue, 23 Apr 1996 10:23:16 GMT

  If you get the error:

    inc: -ERR Unknown command: "rpop"

  you're trying to use "rpop" as the mechanism to authenticate the
  user. This mechanism is specified in RFC 1225 and then removed by
  RFC 1460.

  Your POP server is (rightly) rejecting this.

  The POP specification (RFC 1938) states that authentication is done
  either via a USER/PASS pair or via the APOP command.

  Try running inc with -noapop -norpop flags.

------------------------------
  
Subject: 03.13 How do I persuade mhshow (mhn) not to bring up a new window?
From: Larry Daffner <ldaffner at convex.com>
Date: 27 Mar 1996 16:53:39 -0600

  Add one of the following to your .mh_profile:

     mhshow-charset-iso-8859-1: %s				# nmh
     mhn-charset-iso-8859-1: %s					# MH

------------------------------
  
Subject: 03.14 How do I turn off of all the mhshow (mhn) prompts?
From: Bill Wohler <wohler at newt.com>
Date: Sun, 11 Mar 2001 11:33:10 -0800

  In nmh, use mhshow -nopause.
  
From: Larry Daffner <ldaffner at convex.com>
Date: 27 Mar 1996 16:53:39 -0600

  The "part xxx" message is controlled by the -list switch to mhn so
  add "mhn: -nolist" to your .mh_profile.  To remove the pause, add an
  entry for "mhn-show-text/plain: more '%F'" to override the default
  which includes the "%p" escape.  All of this is covered in the mhn
  man page (sort of--you need to add 2+2).  It's a bit long, but well
  worth reading.

------------------------------
  
Subject: 03.15 Why is inc splitting messages improperly?
From:    Mayank Choudhary <micky at eng.sun.com>
Date:    Mon, 29 Apr 1996 09:39:29 -0700

  MH considers "From " lines as message separators, so if this string
  is found within the body, inc splits the message.

  Add the following line to your .forward
  
    "|/usr/bin/mailcompat <user-name>"
  
  where user-name is your login-id.

  See mailcompat(1) for more information.

------------------------------
  
Subject: 03.16 Can MH thread messages?
From: "John W. Coomes" <jcoomes at delirius.cs.uiuc.edu>
Date: 30 Apr 1997 13:02:10 -0500

  Sort of.  You can resort your folders by Subject with:

    sortm -textfield subject

------------------------------
  
Subject: 03.17 How can I avoid reading the HTML version of the message?
From: Bill Wohler <wohler at gbr.newt.com>
Date: 23 Jun 2000 10:19:34 -0700

  You might find that you have two versions of the same message within
  the message. For example, one part might have a content type of
  text/plain and the other might be text/html.

  You may find that mhshow (mhn -show) wants to show the HTML version
  This is a feature of the multipart/alternative content type. If you
  prefer reading the the plain text version over the HTML version,
  you'd have to remove the line in $MHLIB/mhn.defaults or
  ~/.mh_profile that starts with mhshow-show-text/html
  (mhn-show-text/html). Of course, the tradeoff is that you'd never be
  able to view text/html at all, but you probably wouldn't care.

------------------------------
  
Subject: 03.18 How do I view or save attachments?
From: Bill Wohler <wohler at gbr.newt.com>
Date: Mon, 5 Mar 2001 09:12:15 -0800

  Use mhshow (mhn -show) and mhstore (mhn -store) respectively. See
  the man pages for more details.

------------------------------
  
Subject: 03.19 How do I view HTML attachments with Netscape?
From: Bill Wohler <wohler at gbr.newt.com>
Date: Mon, 5 Mar 2001 09:58:05 -0800

  Add one of the following to ~/.mh_profile:

    mhshow-show-text/html: %lnetscape -remote 'openURL(file:%f, new-window)'
    mhn-show-text/html: %lnetscape -remote 'openURL(file:%f, new-window)'

  The % escapes are described in the mhshow (mhn) man page. The
  ", new-window" argument in the netscape invocation is optional, but
  handy. After reading the message, you can dismiss the window with
  M-w and go back to reading mail.

------------------------------

Subject: 04.00 ***** Filing *****
From: Bill Wohler <wohler at newt.com>
Date: Fri, 1 Mar 1991 13:03:15 -0800

------------------------------

Subject: 04.01 Can I append MH messages to a Unix mailbox format file?
From: Richard Coleman <coleman at math.gatech.edu>
Date: Tue, 20 Jan 1998 02:19:58 -0500

  In nmh, use packf instead.

From: Bill Wohler <wohler at newt.com>
Date: Fri, 1 Jan 1993 00:00:00 -0800

  Yes, see $MHLIB/packmbox.

------------------------------
  
Subject: 04.02 Can I append MH messages to a GNU Emacs rmail BABYL-format file?
From: Bill Wohler <wohler at newt.com>
Date: Fri, 1 Mar 1991 13:03:15 -0800

  To convert your MH folders to BABYL folders, first run the following script
  on your Mail directory.

    #!/bin/sh

    for f in Mail/*; do
	if [ -d $f ]; then
	    touch msgbox
	    folder=`basename $f`
	    echo -n packing $folder ...
	    packf +$folder
	    echo done
	    mv msgbox Mail-rmail/$folder
	fi
    done

  This assumes you don't have nested folders.  Your rmail folders will be
  left in $HOME/Mail-rmail in MMDF format which rmail can read.  Then run
  rmail-input for each folder, which converts each folder into BABYL format.

  Be sure not to append any messages before they are converted from MMDF
  to BABYL, since there may be really strange results.

------------------------------
  
Subject: 04.03 Why do I get ".../.mh_sequences is poorly formatted?"
From: Richard Coleman <coleman at math.gatech.edu>
Date: Tue, 20 Jan 1998 02:19:58 -0500

  This bug has been fixed in nmh (as of version 0.20).  There are no
  limitations on the length of an entry in the .mh_sequences file.

From: Jerry Peek <jpeek at jpeek.com>
Date: Mon, 1 Aug 1994 00:00:00 -0800

  There is a line length limit in this file.  When sequences are
  unbroken (without gaps in numbering), that makes short entries in
  the .mh_sequences file, like this:

    inftex: 72-8000

  But when there are lots of numbering gaps, the entry gets long:

    inftex: 76 79-81 87 95-96 105 109 120 124 135 141 158 163...

  That's when you run into problems, and why it's good to keep the
  folder packed when you can.  Simply run "folder -pack +folder".

  If you're refiling a lot of messages in a large folder, you might
  not be able to use sequences.  Use backquotes to give the message
  numbers directly to "refile".  For example:

    refile +tex/info-tex `pick -to info-tex`

  That can still generate a long list of arguments to the "refile" command,
  and some Unixes can't handle that.  In that case, use xargs(1):

    pick -to info-tex | xargs refile +tex/info-tex

  If worse comes to worst, fire up a Bourne shell and use a "while" loop:

    pick -to info-tex | fmt | while read nums; do
	refile +tex/info-tex $nums
    done

  The fmt(1) command breaks long lines into manageable chunks of 72
  characters or so, splitting arguments at whitespace.  When you redirect
  the input of a while loop, a "read" command will read the incoming text
  and store it in a shell variable line by line.  This is a quick-&-dirty
  way to write xargs(1) if you don't have it.

------------------------------
  
Subject: 04.04 How can you save News articles into an MH folder?
From: Jerry Peek <jpeek at jpeek.com>
Date: Mon, 1 May 1995 00:00:00 -0800

  If your newsreader handles backquotes on its command line, you can use
  the mhpath command.  For instance, if your "save" command is "s":

    s `mhpath new +somefolder`

  Or if your newsreader lets you define your own commands, as in shell
  aliases, you could define that as a command.

  If your newsreader can pipe an article to the standard input of a
  program, use the "rcvstore" command (in the MH library).  For instance,
  if your "pipe" command is "|":

    | $MHLIB/rcvstore +somefolder

  Of course, you can also put that in a little shell script.

------------------------------
  
Subject: 04.05 Are there any good tools to archive MH messages?
From: glimpse at cs.arizona.edu
Date: Sun, 4 Mar 2001 10:26:24 -0800

  Glimpse is a very powerful indexing and query system that allows you
  to search through all your files very quickly. It can be used by
  individuals for their personal file systems as well as by
  organizations for large data collections.

    http://www.webglimpse.org/

From: Bill Wohler <wohler at newt.com>
Date: Sun, 26 Nov 1995 17:10:59 -0800

  For those of lesser means, I have three shell scripts for archiving,
  seeking, and extracting MH messages that I have been using for
  almost 10 years.  Send mail if interested.  Note that I intend to
  switch to Glimpse if I get a moment.

------------------------------
  
Subject: 04.06 How can I remove duplicate messages?
From: Jerry Peek <jpeek at jpeek.com>
Date: 20 Nov 1995 18:51:24 GMT

  The easiest way I know of is to sort the folder by the Message-ID
  field using the sortm(1) command.

  After the sort, each message should be next to its duplicates in the
  folder.  Use a script (shell, Perl, etc.) to weed out the
  duplicates.  (See "Removing duplicate messages (Bourne)").

  The Perl script in (see "Removing dupicate messages (Perl)) does not
  require that you first sort the folder.

------------------------------
  
Subject: 04.07 How can I remove holes in numbering?
From: Bill Wohler <wohler at newt.com>

  folder -pack

------------------------------

Subject: 05.00 ***** Composing & Replying *****
From: Bill Wohler <wohler at newt.com>
Date: Fri, 1 Mar 1991 13:03:15 -0800

------------------------------

Subject: 05.01 Why does repl add a "Re:" to a message that already has one?
From: Larry McVoy <lm at slovax.Eng.Sun.COM>
Date: Fri, 1 Mar 1991 13:03:15 -0800

  I carefully reconfigured and rebuilt MH from scratch and the problem
  went away.

------------------------------
  
Subject: 05.02 How do I include messages in repl with or without ">"?
From: Richard Coleman <coleman at math.gatech.edu>
Date: Tue, 20 Jan 1998 02:19:58 -0500

  In nmh, to include a message in a reply with a leading ">", just
  use "repl -format".

From: Alan Thew <qq11 at liv.ac.uk>, Mike Schwager <schwager at cs.uiuc.edu>,
	James T Perkins <jamesp at sp-eug.com>
Date: Fri, 1 Jan 1993 00:00:00 -0800

  When making a reply, specify a filter file on the command line:

    repl -filter repl.format

  This filter file must be in your MH mail directory (usually "Mail",
  in your home directory).  Here are a couple of example repl.format
  files:

    overflowtext="",overflowoffset=0
    message-id:nocomponent,formatfield=\
    "In message %{text}you write:"
    body:component=">",overflowtext=">",overflowoffset=0

  or

    overflowtext="",overflowoffset=0
    date:component="Your message dated",formatfield=\
    "%<(nodate{text})%{text}%|%(pretty{text})%>"
    body:component=">",overflowtext=">",overflowoffset=0

  Setting overflowoffset to 0 keeps MH from doing anything to
  extra-long lines in the headers.  In the body, however, this
  behavior is overridden so that long lines are automatically broken
  and a ">" is inserted before every line.  You could put almost
  whatever you want between those quotes, although the "standard" ">"
  makes it easier to read notes that have been included several times.
  The examples differ with the descriptive text that is inserted
  before the included body.

  It is suggested not to use the "prompter" editor in this case, since
  it is likely that you'll not want to use all of the included
  message.  Indeed, it is proper etiquette to edit out all unnecessary
  include verbiage so readers don't have to wade through the morass to
  read your pearls of wisdom.

  WARNING: the '>' appears on the first line ONLY in versions prior
  to 6.7.2.  Upgrade to MH 6.8.

  See also MH book sections 7.8.4 (6.7.4), 7.8.5 (6.7.5), 10.4.1 (9.4.1),
  or the URLs:

    http://www.ics.uci.edu/~mh/book/mh/reprep-2.htm#ReaEdi
    http://www.ics.uci.edu/~mh/book/mh/reprep-2.htm#Inc
    http://www.ics.uci.edu/~mh/book/mh/verrep.htm#IncRep

------------------------------
  
Subject: 05.03 How can I eliminate duplicate copies of letters to myself?
From: Bill Wohler <wohler at newt.com>
Date: Fri, 1 Mar 1991 13:03:15 -0800

  Add these two lines to your MH profile file:

    Alternate-Mailboxes: user@host1, user@host2, ...
    repl: -nocc me

  The Alternate-Mailboxes also tells scan which messages are really
  from you so that it can place the recipient in the scan line instead
  of the sender.

From: Jerry Peek <jpeek at jpeek.com>
Date: Fri, 1 Mar 1991 13:03:15 -0800

  To get one copy, you can either:

  - Take out the "-nocc me"... then you'll get exactly one copy of
    your replies (assuming all your addresses are listed in
    Alternate-Mailboxes), or

  - (See also "How can I save a copy of all messages I send?").

    For more info, see the man pages comp(1),
    repl(1), forw(1), dist(1) and mh-mail(5).

  See also MH book sections 7.8.2 (6.7.2), 9.8 (8.6), or the URLs:

    http://www.ics.uci.edu/~mh/book/mh/reprep-2.htm#Sel
    http://www.ics.uci.edu/~mh/book/mh/defmai.htm

From: Alec Wolman <wolman at crl.dec.com>
Date: Fri, 1 Mar 1991 13:03:15 -0800

  Listing the name of a mailing list in Alternate-Mailboxes is also a
  convenient way to AVOID automatically cc-ing a mailing list when
  replying to a person who sent the message to the mailing-list.

From: Andre Srinivasan <asriniva at us.oracle.com>
Date: Fri, 24 Jan 1997 09:33:19 -0800

  Rather than specify the hostname as part of the mailbox, you can
  simply specify the username and it will match on any host:

    Alternate-Mailboxes: asriniva

------------------------------
  
Subject: 05.04 How can I include my signature?
From: Eric W. Ziegast <ziegast at uunet.uu.net>,
	Hardy Mayer <hardy at golem.ps.uci.edu>
Date: Tue, 1 Nov 1994 00:00:00 -0800

  There are several ways.

  1) The MH way.

  1a) In your Mail directory, create files that
      include your signature into the format of the message.

      ~/Mail/components:
	To:
	cc:
	Subject:
	--------

	--
	Eric Ziegast		ziegast at uunet.uu.net
	UUNET Technologies	uunet!ziegast

      ~/Mail/replfmt
	body:component="> ",compwidth=2
	:--
	:Eric Ziegast      	ziegast at uunet.uu.net
	:UUNET Technologies	uunet!ziegast

     To use the replfmt file, add the following to your ~/.mh_profile:

       repl: -filter replfmt

     When comp is used, your signature is already there along with my
     headers.  When repl is used, the mhl program takes the body of
     the letter you're replying to, prepends '> ' to each line and
     then adds your signature at the end (available after version
     6.7).

  1b) Create an "editor" which can be called from whatnow to add the
      signature when desired or create a frontend to post (use the
      .mh_profile line "postproc: postproc" to call it) that always
      appends the .signature file before calling post to mail the
      message.  David J. Fiander <david at golem.uucp>, David A.
      Truesdell <truesdel at nas.nasa.gov> and Tom Wilmore
      <sastjw at unx.sas.com> have sample scripts to do these.

From: Jerry Peek <jpeek at jpeek.com>
Date: Tue, 1 Sep 1992 00:00:00 -0800

  1c) mysend, a sendproc script, processes a message after
      "What now? send".  See "What references exist for MH" to see
      where the MH book scripts can be ftped from.  The script is
      explained in MH book Section 7.1.4 (13.13), or the URL:
      http://www.ics.uci.edu/~mh/book/mh/senove.htm#ASAtDm

  2) Using your editor.  If you use vi, you can use something like:

       map S :r ~/.signature

     to load your signature out of .signature every time you
     hit 'S'.

  3) Use your windowing system.  xterm, for example, can provide key
     and button mappings for the utterly lazy.

  4) If you use Emacs with mh-e:

  4a) C-c C-s will append the signature.

From: Andre Srinivasan <andre at neuronet.pitt.edu>
Date: Mon, 1 May 1995 00:00:00 -0800

  4b) Add the following to your .emacs file:

	(add-hook 'mh-compose-letter-function
	    (function
	     (lambda(a b c)
	       (save-excursion
		 (goto-char (point-max))
		 (beginning-of-line)
		 (mh-insert-signature)))))

      This hook is called after the draft buffer has been initialized,
      but before you have a chance to type anything.

From: Tom Christiansen <tchrist at perl.com>
Date: Tue, 1 Nov 1994 00:00:00 -0800

  Tired of the same old signature?  Want different signatures for
  different newsgroups?  Here's a program to help you out.

  The way it works is to have .signature be a named pipe, so if you
  don't have named pipes, just say 'n'.

  The sigrand program then feeds stuff down the pipe every time someone
  wants to read it.  That way it works for more than just news, but
  for anything that wants to read your .signature, like a mailer.

  You have your choice of three kinds of signatures:

      1) random (short) fortune from "fortune -s"; you get these if
	 you don't have a global sig file.
      2) random fortune from ~/News/SIGNATURES [global sig file]
      3) random fortune form ~/News/(newsgroup)/SIGNATURES [local sig files]

  Send mail if interested.

Date: Tue, 1 Nov 1994 00:00:00 -0800

  See also the Signature FAQ (see "What references exist for MH?").

------------------------------
  
Subject: 05.05 How do I call my editor with arguments?
From: John Romine <jromine at ics.uci.edu>
Date: Mon, 1 May 1995 00:00:00 -0800

  Set your editor (in .mh_profile) to the following shellscript.

    #/bin/sh
    <youreditor> <yourargs> "$@"
    exit 0

From: Ray Nickson <Ray.Nickson at comp.vuw.ac.nz>
Date: Fri, 1 Mar 1991 13:03:15 -0800

  You might find it useful to make <youreditor> $EDITOR, or to use
  different arguments depending on your EDITOR environment variable.

------------------------------
  
Subject: 05.06 How can I digestify messages in a folder for mail to another user?
From: Jerry Peek <jpeek at jpeek.com>, Bill Wohler <wohler at newt.com>
Date: Fri, 1 Mar 1991 13:03:15 -0800

  How about:

    forw [-digest tmp] [-form forwcomps] [-filter mhl.digest]
	 messages +folder

  These messages can be un-digestified :-) by the MH burst(1) program.

  See also MH book sections 7.9.7 (6.8.7), 8.10 (7.9), or the URLs:

    http://www.ics.uci.edu/~mh/book/mh/forfor-2.htm#CreDig
    http://www.ics.uci.edu/~mh/book/mh/burdig.htm

From: Glenn Vanderburg <glv at utdallas.edu>
Date: Tue, 1 Nov 1994 00:00:00 -0800

  There's another way, which is better if the recipient understands MIME.

    forw -mime messages +folder

  (Make sure that you either have "automhnproc: mhn" in your mh
  profile, or type "edit mhn" to whatnow before you send it.)

  This bundles each message in a MIME message/rfc822 part, and then
  bundles the whole mess up in a multipart/digest part.  You can still
  add your own text at the beginning.  The MH burst program can also
  understand these messages and split them apart with no problem.
  This works beautifully with MIME-capable mail readers, especially
  exmh.

------------------------------
  
Subject: 05.07 How can I change my return address?
From: Bill Wohler <wohler at newt.com>
Date: Tue, 1 Dec 1992 00:00:00 -0800

  If you find that your mailer creates a From header that others have
  trouble replying to, you can add a Reply-To header to override the
  From header in replies.

  Copy the components and replcomps files which are normally found in
  $MHLIB into your Mail directory and add a line like the following
  after the Subject header replacing my address with your address:

    Reply-To: jack@newt.com

------------------------------
  
Subject: 05.08 How can I change my From header?
From: Bill Wohler <wohler at newt.com>
Date: Mon, 27 Nov 1995 11:40:50 -0800

  With either of the following solutions, you'll need to add an
  Alternate-Mailboxes entry in your MH profile so that scan prints
  "To: recipient" rather than your faked address.  For example, if
  your real address is user@somedomain.com and you've added a From
  field of:

    From: Joe Bob <joe.bob@somedomain.com>

  you'll add the following to .mh_profile:

    Alternate-Mailboxes: joe.bob@somedomain.com

From: Bill Wisner <wisner at netcom.com>
Date: Tue, 1 Dec 1992 00:00:00 -0800

  If you're just interested in changing the hostname, add a line to
  $MHLIB/mts.conf (mtstailor):

    localname: desired_host_name

From: Jerry Peek <jpeek at jpeek.com>
Date: Tue, 1 Dec 1992 00:00:00 -0800

  Just put a "From:" header in your "components", "replcomps" and
  "forwcomps" files.  MH will add a "Sender:" header with what it thinks
  is your real address.

------------------------------
  
Subject: 05.09 How can I save a copy of all messages I send?
From: Ping Huang <pshuang at sgihub.corp.sgi.com>
Date: Mon, 18 Dec 1995 17:51:33 -0800

  I suggest the use of the Dcc: field (See "What is the Dcc header?"),
  since the use of "Dcc:" solves the issue of having the same
  Message-Id.  The warning about using Dcc: in general contexts
  doesn't apply to self-blind-carbon copies, and if "Dcc:" is used and
  you are automatically sorting messages into folders based on mailing
  lists, messages which you send will get refiled in the same way.
  Some may prefer all outgoing messages to be segregated; others
  (including myself) prefer not to segregate outgoing messages.

From: Bill Wohler <wohler at newt.com>, Jerry Peek <jpeek at jpeek.com>
Date: Mon, 1 Aug 1994 00:00:00 -0800

  Copy the components and replcomps files which are normally found in
  $MHLIB into your Mail directory and add a line like the following
  after the cc header:

    Fcc: +out

  All outgoing messages will then be saved in the +out folder.  If you
  make a distcomps file, it needs "Resent-Fcc:".

From: Jeppe Sigbrandt <jay at elec.gla.ac.uk>
Date: Sat, 5 Apr 1997 02:04:53 +0100

  You can also use @ in the Fcc field to file the outgoing message in
  the current folder.

    Fcc: @

  This is useful if you filter your mail (e.g., with procmail) and you
  read your mail in folders other than +inbox.

From: David S. Goldberg <dsg at linus.mitre.org>
Date: 30 Oct 1995 10:23:55 -0500

  You can get the Message-ID field by placing the folder in the "Fcc"
  field and adding:

    send: -msgid

  to your .mh_profile.  Unfortunately, this Message-ID isn't as useful
  as sendmail's--it doesn't include the date.

------------------------------
  
Subject: 05.10 Can the folder in Fcc: be dynamically specified?
From: Andy Rabagliati <andyr at wizzy.com>
Date: Mon, 1 Aug 1994 00:00:00 -0800

  My suggestion would be to run Tom Christiansen's rfi script.  If you
  cannot find it on *.sources archive sites (please try first), I can
  mail it to you.

  One good idea would be to write a whatnowproc that files the mail
  based on a procmail or deliver file.  Then you can use the same file
  for incoming and outgoing mail.

------------------------------
  
Subject: 05.11 Can I post secure/encryped mail?
From: Stephen Gildea <gildea at stop.mail-abuse.org>
Date: Mon, 5 Mar 2001 05:32:31 -0800

  There are several packages that support PGP in mh-e:

    mailcrypt by Patrick LoPresti <patl at lcs.mit.edu>
    and Jin Choi <jsc at mit.edu>.  See
    http://mailcrypt.sourceforge.net/ for more info.

    pgp.el by Jack Repenning <jackr at informix.com>
    ftp://sgigate.sgi.com/pub/pgp-aux/pgp-el.tar.gz

  Jack and I have been in communication, so I know that pgp.el will work
  with mh-e 5.0.

From: Bill Wohler <wohler at newt.com>
Date: Mon, 5 Mar 2001 05:30:43 -0800

  PGP keys can be obtained via mail from <pgp-public-keys at pgp.mit.edu>,
  and via the Web at http://www.pgp.net/pgpnet/pks-commands.html.
  Many PGP front-ends (e.g., mailcrypt) automatically obtain keys for
  you.

  See http://www.pgp.net/ for more info.

  Note that I use mailcrypt. It is also comes as a Debian GNU/Linux
  package.

From: Vivek Khera <khera at kciLink.com>
Date: 19 Jun 1995 22:06:37 GMT

  A much more robust Perl script I wrote is appended below [Ed: Send a
  note to Vivek for the script].  It works its way through aliases,
  and avoids problems with full names in the headers.

  Here is my mhn profile entry to display the messages.

    mhshow-show-application/x-pgp: %l pgp -m '%F'	# nmh
    mhn-show-application/x-pgp: %l pgp -m '%F'		# MH

  to use the script, after you edit the message, at the What now?
  prompt, type "edit pgpmail" for plain ascii encryption or "pgpmail
  -m" for a MIME formatted encryption.  If you want to add a digital
  signature, give the script the -s flag also.

From: Jeffrey C. Ollie <jeff at ollie.clive.ia.us>
Date: Mon, 1 May 1995 00:00:00 -0800

  TIS has a free, draft-standard compliant public key system that
  works with MH (PEM).  Check it out on ftp.tis.com.

From: Kimmo Suominen <kim at tac.nyc.ny.us>
Date: Mon, 1 May 1995 00:00:00 -0800

  You could try looking at the URL http://www.tac.nyc.ny.us/ and
  following the link from the cover page.  Everything you need for
  PGP to work with MH is there (scripts and mhn entries).

From: mathew at mantis.co.uk
Date: Mon, 1 May 1995 00:00:00 -0800

  Excellent stuff.  I've tried altering it to conform to
  draft-borenstein-pgp-mime-00.txt.

  Unfortunately, I can't get mhn to tag PGP-armoured text as
  application/pgp; format=text without it insisting on base64 encoding
  it.  So I can't quite manage to implement the standard.  *sigh*

  Presumably mhn thinks that anything which isn't text/* must be
  encoded.

From: Jason L Tibbitts III <tibbs at sina.tcamc.uh.edu>
Date: Mon, 1 May 1995 00:00:00 -0800

  There is an Emacs and MH based mail interface called Mew which,
  while still beta, is quite stable and works well.  It fully handles
  MIME and PGP.  Grab it from:

    ftp://ftp.aist-nara.ac.jp/pub/elisp/Mew/mew-current.tar.gz

From: John R MacMillan <john at interlog.com>
Date: Wed, 16 Apr 1997 00:06:59 -0700

  Premail, in conjunction with MH, can display and compose security
  multiparts (e.g., multipart/signed and multipart/encrypted PGP mail,
  non-MIME PGP, and some S/MIME).  Check out

    http://www.c2.org/~raph/premail/

  for details.

------------------------------
  
Subject: 05.12 How can I send multi-media (MIME) attachments?
From: Brian Exelbierd <bex at ncsu.edu>
Date: Mon, 09 Oct 1995 08:05:55 -0400

  The short guide:

  1. Compose a letter using comp.

  2. When you get to a point where you want to include a MIME attachment, type
     the following to include a GIF image (note: the '#' must be in
     the first column):

	#image/gif [Pictures at an Exhibition] /usr/lib/pictures/exhibition.gif

  3. Finish your letter, adding more text or attachments as needed.

  4. Save your letter and exit the editor.  At the Whatnow prompt
     type "edit mhn".  mhn will automatically format your letter with
     the MIME attachments leaving the original letter in ,##,orig
     where ## is the letter number.

  5. Type "send" at the Whatnow prompt, and poof, you have just sent
     MIME mail.  I strongly recommend you practice sending yourself
     MIME mail first.

  For more information, see the mhn(1) man page,
  ftp://ftp.isi.edu/in-notes/iana/assignments/media-types/media-types
  for a list of allowed media types in addition to image/gif, and
  Chapter 3 in the MH book or the URL:

    http://www.ics.uci.edu/~mh/book/overall/tocs/intmime.htm

------------------------------
  
Subject: 05.13 What's the best way to send mail to a long list of people?
From: Bill Wohler <wohler at newt.com>
Date: Thu, 12 Oct 1995 07:53:53 -0700

  There are three ways to keep the list of members from appearing in
  everyone's header.

  If you're planning on mailing to these people regularly, the best
  way is to create an alias in /etc/aliases (/usr/lib/aliases).  That
  way, recipients can send and reply to the list as well.

  The other two ways allow you to manage the list privately, but the
  recipients cannot send to the list (unless you set something up with
  your deliver or procmail script).  One is with a group list.  It
  looks like this:

    To: All-members: member1, member2, member3, ..., membern;

  The recipients see this:

    To: All-members:;

  You can make this an MH alias as well.

  The second way is to use a blind carbon copy (see "How do I send
  blind carbon copies?").

  Or you could also use the undocumented Dcc field which is used like
  the Bcc field, but doesn't inject the "Blind-Carbon-Copy."  Warning:
  (See "What is the Dcc header?")

------------------------------
  
Subject: 05.14 What is the Dcc header?
From: jpeek at jpeek.com (Jerry Peek)
Date: 14 Sep 96 05:51:13 GMT

  If you put the alias in the Dcc field and leave the To: field empty,
  there's a good chance that the recipients will get a message with
  the header field:

    Apparently-to: <someaddress>

  and it might even list several addresses.  To avoid that, use a To:
  field with some address (like yours) in it.  I use a comment that
  tells people what's really happening--like this, more or less:

    To: "Faculty members, c/o" <super@wierdlmpc.msci.memphis.edu>
    dcc: faculty

  There are some other choices, like using an un-replyable group list
  in the To: field, but I think they tend to confuse non-techies.

Date: Wed, 27 Sep 1995 09:46:37 -0700
From: John Romine <jromine at yoyodyne.ICS.UCI.EDU>

  The Dcc (Distribution Carbon Copy) field behaves much like the Bcc
  field, but does not add the "Blind-Carbon-Copy" notice.  This header
  is removed before posting the message,and a copy of the message is
  distributed to each listed address.  This could be considered a form
  of Blind Carbon Copy which is best used for sending to an address
  which would never reply (such as an auto-archiver).

  People should not be using Dcc as a substitute-Bcc to send to other
  people.  When users use Dcc as a substitute for Bcc, there is *no*
  indication to the "blind" recipients that they have received a blind
  copy.  If those recipients should reply (and they have no indication
  why they shouldn't), the original author could be very embarassed
  (or worse).

------------------------------
  
Subject: 05.15 How can I make sense of the replcomps file?
From: Bill Wohler <wohler at newt.com>
Date: Sun, 26 Nov 1995 19:25:14 -0800

  The best thing to do is curl up with the mh-format(5) man page, or
  Section 11.2 of the MH book, or the URL:

    http://www.ics.uci.edu/~mh/book/mh/mhstr.htm

  These will explain the following replcomps file.  Don't start with the
  first four lines--the latter group of lines are much easier to understand.

    %(lit)%(formataddr %<{reply-to}%?{from}%?{sender}%?{return-path}%>)\
    %<(nonnull)%(void(width))%(putaddr To: )\n%>\
    %(lit)%(formataddr{to})%(formataddr{cc})%(formataddr(me))\
    %<(nonnull)%(void(width))%(putaddr cc: )\n%>\
    Organization: Newt Software
    %<{fcc}Fcc: %{fcc}\n%>\
    %<{subject}Subject: Re: %{subject}\n%>\
    %<{date}In-reply-to: Your message of "\
    %<(nodate{date})%{date}%|%(pretty{date})%>."%<{message-id}
		 %{message-id}%>\n%>\
    --------

  In particular, note the following:

    \	consider the following line to be part of the current line
    \n	inject an actual newline into the reply.  Note that inserting
	    a field without a trailing backslash (\) will cause
	    that field to be emitted in the reply as well.
    %<{field}, %?{field}, %|, %>	if field exists, else if field exists,
					else, endif
    %(command)	mh-format commands
    %{field}	value of the header field inserted at this point

  To add new fields, you can either add fields based on whether
  certain fields exist in the original message (e.g.,
  %<{message-id}...), or hard-code them, as in the Organization field
  above.  Note that you can either use a "\n\" pair, or nothing at the
  end of a line to insert a newline in the reply.

------------------------------
  
Subject: 05.16 How can I convert quoted-printable to 8bit in quoted text in replies?
From: Jarle F. Greipsland <jarle at idt.unit.no>
Date: 22 Aug 1995 10:42:07 +0200

  The idea behind the solution is that I need mhn to store the
  contents of the mail in the native iso8859-1 format somewhere.  I
  did this by creating a custom editor that is invoked when I reply to
  a message.  This editor extracts the body of the message (sorry, no
  multipart stuff), indents it with '> ', appends it to the draft
  message and invokes the ordinary editor on it.  Here are the details:

  `isorepl' is a symbolic link from my $HOME/bin-directory to `repl'.

  In my .mh_profile I added the following two lines:

    isorepl: -form isoreplcomps -editor isoextract
    isoextract-next: vi

  The isoreplcomps file in my Mail-directory contains:

    %(lit)%(formataddr %<{reply-to}%?{from}%?{sender}%?{return-path}%>)\
    %<(nonnull)%(void(width))%(putaddr To: )\n%>\
    %(lit)%(formataddr{to})%(formataddr{cc})%(formataddr(me))\
    %<(nonnull)%(void(width))%(putaddr cc: )\n%>\
    %<{fcc}Fcc: %{fcc}\n%>\
    %<{subject}Subject: Re: %{subject}\n%>\
    %<{date}In-reply-to: Your message of "\
    %<(nodate{date})%{date}%|%(pretty{date})%>."%<{message-id}
		 %{message-id}%>\n%>\
    --------
    #<text/plain; charset=iso-8859-1
    %<{message-id}In message %{message-id} %>\
    %<{from}%(friendly{from}) writes%|You write%>:

  This is a "Usenet-like" quoting style.  Modify to suit your own
  taste.  This form will setup the proper header, as well as the first
  line of the new message (In <mmmmbbbb> nnnn writes etc.).

  The first editor, `isoextract', looks like this:

    #!/bin/sh
    #
    # Called from within repl where the "editalt" variable is valid
    #
    # Point to a special MHN configuration file (save old one)
    OLDMHN="$MHN"
    MHN=$HOME/`mhparam Path`/isoquotemsg
    export MHN

    # Extract message body to "native" format (should be iso-8859-1)
    # > More bla bla.
    mhn -file "$editalt" -store >> $1 2>/dev/null

    MHN="$OLDMHN"
    myname=`basename $0`
    next=`mhparam ${myname}-next`
    if [ "x$next" != "x" ]; then
	    exec $next "$@"
    fi

  `isoquotemsg' has just one rule; how mhn should store a text message.

    mhn-store-text: |sed -e 's/^[	]*$//' \
			 -e 's/^\([>|]\)\(.*\)$/>\1\2/' \
			 -e 's/^\([^>|].*\)$/> \1/'

  This tells mhn to pipe the message to stdout, where the sed commands will
  do the reformatting/quoting. (Note: the first pair of square brackets
  contains a space and a tab.)

  So, when I do a `isorepl' to a message, `repl' will create the draft
  message with the proper headers (based on the `isoreplcomps' format file),
  fire off its first editor, `isoextract', with the name of the draft file as
  its parameter. `isoextract' then invokes mhn in a suitable environment,
  tells it that it is to use the file $editalt as its source, and orders it
  to store the contents.  The store-text rule in the custom MHN-file tells it
  to just pipe the message (in native iso8859-1 form) through a small set of
  sed commands, and `isoextract' uses the normal shell construct to append
  the result to the draft file.  Then, if there's defined a `isoextract-next'
  entry in the .mh_profile, isoextract exec's this editor.

------------------------------
  
Subject: 05.17 Can I have aliases include aliases?
From: Bruce Cox <bruce at maths.su.oz.au>
Date: Fri, 16 Aug 1996 14:26:12 +1000

  Indeed, you can.

  You just need to remember the way MH expands aliases.  In
  particular, the right hand sides are only expanded by the aliases
  below them in your aliases file.  So, if you put in:

    dead-men: presidents, authors
    presidents: washington, lincoln, jefferson, roosevelt
    authors: thoreau, irving, london

  and type:

    ali dead-men

  then you would get the response:

    washington, lincoln, jefferson, roosevelt, thoreau, irving, london

  If you had the dead-men line after the presidents and authors aliases, the
  response would be:

    presidents, authors

------------------------------
  
Subject: 05.18 Why doesn't mhmail understand aliases?
From: "John L. Romine" <jromine at yoyodyne.ics.uci.edu>
Date: 25 Apr 1996 16:34:10 GMT

  One way that mhmail might be run is from a shell script.  This means
  that the user running it might not use MH, and would not have a
  .mh_profile, etc.  If you want to use aliases with mhmail, expand
  them before passing them as arguments (e.g., "mhmail `ali joe`").

------------------------------
  
Subject: 05.19 How do I send blind carbon copies?
From: Bill Wohler <wohler at newt.com>
Date: Mon, 9 Sep 1996 00:32:14 -0700

  Use the Bcc header field:

    To: your-address-here
    Bcc: member1, member2, member3, ..., membern

  The recipients see this:

    To: your-address-here

    ------- Blind-Carbon-Copy

    Content of message, with headers

  If you don't want the "Blind-Carbon-Copy" message, use the Dcc
  field, but this is discouraged in true blind carbon copies since the
  warning may prevent the recipient from embarrassing someone
  inadvertently.  Read the warning in (see "What is the Dcc header?").

------------------------------
  
Subject: 05.20 When I forward a message, can I use its Subject?
From: Jerry Peek <jpeek at jpeek.com>
Date: Sun, 17 Nov 1996 20:16:31 -0800

  Obtain forwedit.

    ftp://ftp.ics.uci.edu/pub/mh/contrib/jpeek/forwedit

------------------------------
  
Subject: 05.21 Why is the timezone field in my 'Date:' field wrong?
From: Alex Tomlinson <tomlinson at acm.com>
Date: Wed, 11 Jun 1997 09:16:41 -0500

  If the date field in your mail header looks like this:

    Date: Tue, 10 Jun 1997 15:59:03 +2228904

  remove -lbsd from your MH configuration, add "curses -lcurses", and
  rebuild.

------------------------------
  
Subject: 05.22 Can I automate the comp -editor mhn process?
From: Soren Dayton <csdayton at gargoyle164.cs.uchicago.edu>
Date: Tue, 21 Jan 1997 17:23:32 GMT

  Add

    automhnproc: mhn

  to your MH profile.

------------------------------
  
Subject: 05.23 How can I remove those "=20" characters when forwarding?
From: Dave Marquardt <marquard at Austin.IBM.Com>
Date: 12 Oct 2000 10:27:38 -0500

  Use `forw -mime'.

------------------------------
  
Subject: 05.24 Can I use mh-format substitution with forw?
From: Dave Marquardt <marquard at Austin.IBM.Com>
Date: Tue, 3 Aug 1999 13:28:30 -0500 (EST)

  The answer is no, and the real question is why not?

------------------------------

Subject: 06.00 ***** Posting *****
From: Bill Wohler <wohler at newt.com>
Date: Fri, 1 Mar 1991 13:03:15 -0800

------------------------------

Subject: 06.01 What to do with "Problems with edit - draft removed".
From: John Romine <jromine at ics.uci.edu>
Date: Mon, 1 May 1995 00:00:00 -0800

  If your users are using an AT&T version of "vi", it's exiting with
  non-zero status (supposedly a count of the "errors" during the edit).
  Move "vi" to "broken_vi" and put it its place :

    #! /bin/sh
    /usr/ucb/broken_vi "$@"
    exit 0

  Alternatively, compile MH with the ATTVIBUG option.

  Then complain to your vendor that "vi" is broken, and they should
  fix it.

------------------------------
  
Subject: 06.02 Can I run my message through a program (e.g., ispell) before sending?
From: Jerry Peek <jpeek at jpeek.com>
Date: Fri, 1 Mar 1991 13:03:15 -0800

  It's pretty simple.  If your speller is called myspell, use:

    What now? edit myspell

  MH will actually execute:

    myspell /your-mail-draft-directory/draftfile

  and give the entire draft message to your speller.  The header will
  probably be "misspelled," of course, though you might be able to
  tell the speller to ignore it--or you could hack up a little shell
  script to run the speller on just the message body, then tack the
  corrected body back onto the header before sending.

  You can automate this some more.  For example, if you want your
  speller to run after your first edit with "prompter" and also after
  you leave the "vi" editor, add these lines to your MH profile:

      prompter-next: myspell
      vi-next: myspell

  Then, at the "What now?" prompt:

      What now? e

  your speller will run.  For more info, see the mh-profile(5) man
  page or section 7.2.1 (6.2.1) of the MH book, or the URL:

    http://www.ics.uci.edu/~mh/book/mh/chaedi.htm#Edi

------------------------------
  
Subject: 06.03 What to do with "bad address 'xxx' - no at-sign after local-part".
From: Owen Rees <rtor at ansa.co.uk>
Date: Fri, 1 Jan 1993 00:00:00 -0800

  You may find that post returns the following message:

    post: bad address 'Mr. Foo Bar <fb@somewhere.edu>' - no at-sign
    after local-part (Bar), continuing...

  The unquoted dot causes "Mr. Foo" to be parsed as the local part of
  the address.  Either remove the dot, or rewrite the address as
  follows:

    "Mr. Foo Bar" <fb@somewhere.edu>
    (Mr. Foo Bar) <fb@somewhere.edu>
    (Mr. Foo Bar) fb@somewhere.edu

------------------------------
  
Subject: 06.04 Fixing "post: problem initializing server; [BHST] no servers available"
From: Peter Marvit <marvit at hplabs.hpl.hp.com>,
	Eric Bracken <bracken at bacon.performance.com>
Date: Tue, 1 Nov 1994 00:00:00 -0800

  The error message itself is essentially correct.  However, what this
  really means is: MH's post cannot connect to a running sendmail over
  an SMTP port (MH configured with SMTP and SENDMTS).

  The potential problems:

  1. Your local sendmail daemon is dying or not running for some
     reason.

  2. You use BIND and your local nameserver is not responding.
     Solution: Delete "/etc/resolv.conf."

  3. Your $MHLIB/mts.conf (mtstailor) has its "servers:" pointing to a
     non-existent machine or a machine which is a) not reachable or b)
     not running the sendmail daemon.

From: Bdale Garbee <bdale at col.hp.com>,
	Eric Bracken <bracken at bacon.performance.com>
Date: Sun, 1 May 1994 00:00:00 -0800

  4. The hostname localhost [127.0.0.1] is missing from /etc/hosts.

     Solution: add an entry for "localhost" to /etc/hosts or your DNS
     database or add the following to $MHLIB/mts.conf (mtstailor):

       servers: 127.0.0.1 \01localnet

From: Larry Daffner <ldaffner at convex.com>
Date: 3 Mar 1996 14:39:54 -0600

  5. Your load average is so high that sendmail is refusing connections.

     Solution: Change your configuration from "mta: sendmail/smtp" to
     "mta: sendmail" so that a sendmail processes is spawned to
     deliver the message.  This is a double-edged sword since the
     extra process only makes the load worse.

------------------------------
  
Subject: 06.05 Fixing "post: problem initializing server; [RPLY] 503 Sender already specified"
From: Paul Pomes <ppomes at Qualcomm.com>
Date: Mon, 1 Mar 1993 00:00:00 -0800

  The problem in sendmail is that the RSET after the ONEX does not
  reset all the state information.  Normally sendmail fork()s after
  the Mail from: statement and a RSET causes that child to exit. This
  automatically cleans up.  If the fork() is suppressed by ONEX, then
  the source must be modified to do the cleanup.  See "srvrsmtp.c
  patch" in the Appendix.  If you don't have the sources, modify your
  MH sources to not use the ONEX verb.

------------------------------
  
Subject: 06.06 Fixing "post: unexpected response; [BHST] no socket opened"
From: Steve Lembark <lembark at wrkhors.la.ca.us>, Bill Wohler <wohler at newt.com>
Date: Mon, 1 Aug 1994 00:00:00 -0800

  This problem happens when there is no interface defined within the
  tcp system.  A couple of workarounds include:

  o Use a hostname (other than the local host) instead of localhost in
    the "servers" entry of the $MHLIB/mts.conf (mtstailor) file.
  o Recompile MH with sendmail instead of sendmail/smtp (not very elegant).

  A better fix would be to define your tcp interface.

  Here, you run ifconfig and route (as root) to define the loopback
  device and route.  You should add them to rc.local so they are
  effected at every boot.

    # ifconfig lo 127.0.0.1			# Linux
    # ifconfig lo0 127.0.0.1		# Sun

    # route 127.0.0.1

  If all is well, "ifconfig lo" (or lo0), will show something like this
  (on my Linux system):

    lo        Link encap Local Loopback
	      inet addr 127.0.0.1  Bcast 127.255.255.255  Mask 255.0.0.0
	      UP LOOPBACK RUNNING  MTU 2000  Metric 0
	      RX packets 0 errors 0 dropped 0 overrun 0
	      TX packets 519 errors 0 dropped 0 overrun 0

  and "netstat -r" will show:

    # netstat -r
    Destination net/address   Gateway address    Flags RefCnt    Use Iface
    127.0.0.0                 *                  UN         0    519 lo

  If you're not on a network and running DNS, your /etc/hosts will
  need at least:

    127.0.0.1	your_host_name localhost 	# loopback address

  Note: put your name FIRST on the localhost line.  This official name
  is used by sendmail to determine your return address.

  If you are on a network and running DNS, you might find that putting
  your host name in the localhost entry might gum up other things, in
  which case you'll want your hostname to have its own proper address.

  This might not do it though.  David Youatt <dpy at sgi.com> says that
  his network was happy but he still had the problem until he upgraded
  his system and got the latest revision of sendmail as well.  He
  says: "Turns out that that the problem I was having seems to be
  caused (at least partly, maybe entirely) by the version of sendmail
  that is shipped with IRIX 5.2 (sendmail 5.65, I think).  The version
  shipped w/IRIX 5.3 (in beta) is sendmail 8.6.9 and works fine."

  I'm not entirely happy with this section, so please give me some
  feedback.  If you have this problem, please send me
  <wohler at newt.com> a brief description so I'll know which problems
  and solutions seem to be the most prevalent.

------------------------------
  
Subject: 06.07 How do I fix the "X-Authentication-Warning" header?
From: Bill Wohler <wohler at newt.com>
Date: Mon, 9 Sep 1996 01:32:15 -0700

  (See "Fixing "Sender didn't use the HELO protocol"".)

------------------------------
  
Subject: 06.08 Fixing "post: unexpected response; [RPLY] 503 Need MAIL before RCPT"
From: Bjoern Stabell <bjoerns at acm.org>
Date: Mon, 1 May 1995 00:00:00 -0800

  I inserted:

    clientname: localhost

  in the $MHLIB/mts.conf (mtstailor) file, and that fixed the problem.

------------------------------
  
Subject: 06.09 Fixing "post: problem initializing server; [BHST] premature end-of-file on socket"
From: Stefan Huebner <sh at muc.de>
Date: Wed, 11 Sep 1996 20:06:49 +0200

  Use spost instead of post.  To do this:

    % mv post post.orig
    % ln -s spost post

From: Chuck Mattern <cmattern at mindspring.com>
Date: Mon, 1 May 1995 00:00:00 -0800

  If you are running sendmail instead of smail, make sure that all
  smtp entries in /etc/inetd.conf are commented out.  If you do edit
  /etc/inetd.conf, don't forget to run to restart inetd with "kill -1
  <inetd PID>".

------------------------------
  
Subject: 06.10 Fixing "Sender didn't use the HELO protocol"
From: rickert at cs.niu.edu (Neil Rickert)
Date: Tue, 20 Mar 2001 22:01:16 -0800

  If you are sharing your $MHLIB/mts.conf (mtstailor) file among
  several machines, and you are connecting to the local sendmail, then
  use 'localhost' as the hostname argument to the clientname parameter
  (described below).

  Otherwise, place mts.conf somewhere under /etc on each system, and
  install a symlink to it on the shared file system.

From: labrown at dg-rtp.dg.com (Lance A. Brown)
Date: 23 Apr 1996 14:43:04 -0400

  You can solve this by putting

    localname:      localhostname
    localdomain:    local.domain.name

  in your $MHLIB/mts.conf (mtstailor) file. This will make MH send a
  HELO string in the SMTP transaction.

From: Terry Manderson <terry at azure.dstc.edu.au>
Date: Mon, 1 May 1995 00:00:00 -0800

  Add

    clientname sender

  to $MHLIB/mts.conf (mtstailor) where sender is the name of the
  machine sending the message. The error message occurs because newer
  MTA's require SMTP's "HELO" command which MH omits in some
  configurations. When you add the above line, it forces MH to use the
  HELO command.

From: Bill Wohler <wohler at newt.com>
Date: Fri, 1 Mar 1991 13:03:15 -0800

  You get a header like:

    X-Authentication-Warning: screamer.rtp.ericsson.se: Host
    rcur7.rtp.ericsson.se didn't use HELO protocol

  Easy possibilities are:  apply the patch to MH that comes with Sendmail
  8.X.X and makes it use HELO, or comment out the line that says

    Opauthwarnings

  in your sendmail.cf.

------------------------------
  
Subject: 06.11 Fixing "post: problem initializing server; [RPLY] 553 Local configuration error, hostname not recognized as local
From: "Matthew V. J. Whalen" <whalenm at aol.net>
Date: Mon, 1 May 1995 00:00:00 -0800

  Change your "mts" in "conf/MH" from "sendmail/smtp" to just
  "sendmail."

From: Bill Wohler <wohler at newt.com>
Date: Mon, 1 May 1995 00:00:00 -0800

  The solution above will keep MH from using any SMTP server on your
  network. require sendmail to be installed on all machines. You could
  take advantage of the "sendmail/smtp" option to have MH talk to a
  non-local sendmail. In $MHLIB/mts.conf (mtstailor) add:

    servers <SMTP-server>

  It may also be caused by old versions of sendmail.

------------------------------

Subject: 07.00 ***** Mail Filters *****
From: Bill Wohler <wohler at newt.com>
Date: Fri, 1 Mar 1991 13:03:15 -0800

------------------------------

Subject: 07.01 What mail filters are available?
From: Bill Wohler <wohler at newt.com>
Date: Sun, 11 Mar 2001 10:27:24 -0800

  The list currently includes slocal (included with MH), deliver,
  procmail and mailagent.  They are briefly described here.  Slocal is
  probably the most popular by virtue of being included in the
  distribution.  The next most popular entry is procmail, followed by
  deliver.

  Slocal comes with MH.  It can be used to process incoming mail based
  on the contents of any of the headers.  Actions include filing
  messages, running commands, printing messages on your terminal and
  so on.  The configuration is made in ~/.maildelivery.  People seem to
  have trouble with slocal bugs, and you can't use it if you don't
  have write permission on your system maildrop so a lot of people
  have opted for the alternatives, but it's easy to use and comes with
  MH.

  procmail is quite popular and has a very powerful configuration
  file.  However, the syntax is its own, but it is easy to learn given
  a couple of good examples.  Its advantages are its small size and
  speed.  Like deliver, procmail may be installed as a delivery agent
  so you would not even have to have a .forward file.

  Deliver can run any script or program (called ~/.deliver), so you
  really can do anything you want to incoming mail.  One feature that
  it sports that no other does is that you can install it as a local
  mailer in place of /bin/mail.  If it's the local mailer, you don't
  need to have a .forward--~/.deliver is run anyway.  In addition, it
  allows the system administrator to write some programs to filter
  everybody's mail.  It came with my Linux system, so installation was
  non-existent.

  I started with slocal, and then moved to deliver. I switched to
  procmail because of a bug in deliver (which I think has since been
  fixed) whereby a blank line would be inserted into the header before
  header fields with numbers in them.

  I am still using procmail and probably will do so indefinitely since
  it is powerful, there are many spam filters written in it, and it
  coexists with MH and gnus so well.

  My recommendation is to use the one that is installed on your system
  or get procmail. Here are the URLs for the filters mentioned in this
  document:

    http://www.procmail.org/

From: "Eric D. Friedman" <friedman at hydra.acs.uci.edu>
Date: 28 Aug 1996 08:28:46 GMT

  See http://www.faqs.org/faqs/mail/filtering-faq/index.html.

From: Stephen R. van den Berg <berg at pool.informatik.rwth-aachen.de>
Date: Mon, 1 Aug 1994 00:00:00 -0800

  Procmail can be used to create mail-servers, mailing lists, sort
  your incoming mail into separate folders/files (real convenient when
  subscribing to one or more mailing lists or for prioritizing your
  mail), preprocess your mail, start any programs upon mail arrival
  (e.g. to generate different chimes on your workstation for different
  types of mail) or selectively forward certain incoming mail
  automatically to someone.

From: Raphael Manfredi <Raphael_Manfredi at grenoble.hp.com>
Date: Tue, 28 Jul 1998 13:22:07 +0200

  "mailagent" is yet another mail filter, written in perl, which will
  let you do anything with your mail. It has all the features you may
  expect from a filter: mailing lists sorting, forwarding to MTA or to
  inews, pre-processing of message before saving into folder, vacation
  mode, etc.  It was initially written as an Elm-filter replacement,
  but has now enough power to also supplant MMDF's
  .maildelivery. There is also a support for @SH mail hooks, which
  allows you to automatically distribute patches or software via
  command mails.

  The mailagent was designed to make mail filtering as easy as it can
  be. It is highly configurable and fairly complete. Rules are
  specified in a lex-like style, with the full power of perl's regular
  expressions. The automaton supports the notion of mode, and header
  selection has many magic features built-in, to ease the rule writing
  process.

  The distribution comes with a set of examples, an exhaustive test
  suite, and naturally a detailed manual page. It should be noted that
  the mailagent will work even if your system administrator forbids "|
  programs" hooks in the ~/.forward, provided you have access to some
  sort of cron daemon.

  You can get a full email distribution of the latest release by
  sending an appropriate command to my own mailagent, such as:

    Subject: Command

    @SH maildist PATH mailagent -

  where PATH stands for YOUR email address, i.e. a path from me to
  you.

    http://www.cpan.org/authors/Raphael_Manfredi/

------------------------------
  
Subject: 07.02 Why slocal writes messages to system mailbox that from(1) can't read.
From: Bill Wohler <wohler at newt.com>
Date: Mon, 1 May 1995 00:00:00 -0800

  Upgrade to MH 6.8 and set the RPATHS option.  Better yet, use a more
  MH-like command instead of from: "scan -file $MAIL".

------------------------------
  
Subject: 07.03 Where can I read about slocal and the format of .maildelivery?
From: Bill Wohler <wohler at newt.com>
Date: Fri, 1 Mar 1991 13:03:15 -0800

  See the slocal man page.

  Here is brief example of a .maildelivery file that stores messages
  to babble in a folder and the system mailbox, stores mh-users in a
  folder but not the system mailbox, and puts the rest in the system
  mailbox.

    to  mh-users  | A "$MHLIB/rcvstore -create +lists/mh-users"
    cc  mh-users  | A "$MHLIB/rcvstore -create +lists/mh-users"
    to  babble    | R "$MHLIB/rcvstore -create +lists/babble"
    cc  babble    | R "$MHLIB/rcvstore -create +lists/babble"
    default -     > ? /usr/spool/mail/wohler

  Your .forward file may look like (quotes necessary):

    "| $MHLIB/slocal -user your_login"

  In some implementations, the "-user your_login" is not needed.  If
  not, manually running slocal with the flag will produce an error.

  See also chapter 12 (11) in the MH book, or the URL:

    http://www.ics.uci.edu/~mh/book/mh/tocs/prmaau.htm

  Alternatives to slocal include deliver, procmail, and mailagent.
  (See "What mail filters are available?")

------------------------------
  
Subject: 07.04 How do I debug my .maildelivery file?
From: Bill Wohler <wohler at newt.com>
Date: Mon, 1 Mar 1993 00:00:00 -0800

  Use as many of the following as necessary.

  Put a message into a file and call slocal directly on it.

    $MHLIB/slocal -user $USER -verbose -debug < test-msg

  Modify your .forward to look like:

    "|/bin/sh -c 'exec >> /tmp/out 2>&1;
    $MHLIB/slocal -user $USER -verbose -debug'"

  Or modify a rule in .maildelivery to look like this:

    to foo | R "set -xv; exec >/tmp/out 2>&1; $MHLIB/rcvstore +foo"

  The previous examples are broken up for readability; the text must
  appear on one line.

  See also MH book section 12.11 (11.11), or the URL:

    http://www.ics.uci.edu/~mh/book/mh/debugti.htm

------------------------------
  
Subject: 07.05 Why isn't slocal working?
From: Bill Wohler <wohler at newt.com>
Date: Mon, 1 Mar 1993 00:00:00 -0800

  If slocal doesn't appear to be doing anything, run the following

    $MHLIB/slocal -user your_login -verbose < file

  where "file" is some message in a mail folder.  If you get something
  like:

    .maildelivery: ownership/modes bad (0, 154,154,0100666)

  your .maildelivery is writable by too many people.  Make it writable
  only by you by running "chmod 644 .maildelivery".

  See also "How do I debug my .maildelivery file?"

------------------------------
  
Subject: 07.06 Are there any good biff applications for MH?
From: Richard Coleman <coleman at math.gatech.edu>
Date: 07 Jul 1997 03:31:42 -0400

  nmh (new MH) has an additional command (flist) that will tell you
  which folders have unseen messages.  I can't imagine using MH
  without it.

From: crow at tivoli.com (David L. Crow)
Date: 7 Jul 97 09:36:32 GMT

  I have used the following X resource with xbiff before:

    xbiff*checkCommand: grep -q '^unread' `mhpath +inbox`/.mh_sequences \
                        && exit 0 || exit 2

  This should be all one line, but I split it with a line continuation
  character for readability.

------------------------------

Subject: 08.00 ***** mh-e *****
From: Bill Wohler <wohler at newt.com>
Date: Fri, 1 Mar 1991 13:03:15 -0800

------------------------------

Subject: 08.01 I have a question about mh-e
From: Bill Wohler <wohler at newt.com>
Date: Sat, 3 Mar 2001 13:51:29 -0800

  Let me send you over to:

    http://mh-e.sourceforge.net/

  This is the SourceForge mh-e project. It has mailing lists and files
  to download, and will let you submit patches or support requests.

  The Support Requests section may already contain an answer to your
  question. If not, you can post your question:

    http://sourceforge.net/tracker/?group_id=13357&atid=213357

------------------------------

Subject: 09.00 ***** Xmh *****
From: Bill Wohler <wohler at newt.com>
Date: Fri, 1 Mar 1991 13:03:15 -0800

------------------------------

Subject: 09.01 How can I get xmh to use Emacs as the editor?
From: Bob Ellison <ellison at sei.cmu.edu>
Date: Fri, 1 Mar 1991 13:03:15 -0800

  The modifications to xmh to support an external editor, annotations,
  and an append command can be found in the these places.

    ftp://ftp.x.org/R5contrib/xmh-mods-R5-1.7.Z				37k
    ftp://ftp.sei.cmu.edu/pub/xmh/xmh-mods-R5-1.7.Z			37k
    ftp://ftp.sei.cmu.edu/pub/xmh/xmh-mods-R6-1.0.Z			37k

From: Andrew Wason <aw at bae.bellcore.com>
Date: Fri, 1 Mar 1991 13:03:15 -0800

  As of R5, xmh has a new action proc called XmhShellCommand.  A
  string parameter will be executed as a shell command with the
  currently selected messages as parameters (or the current message if
  there are no selected messages).

  Using this new action, a couple of shell scripts, a window version
  of emacs (e.g. xemacs) and some elisp code, xmh can use emacs as its
  editor instead of the built in Athena text widget editor.  This
  doesn't require any source code changes to xmh.  These are included
  in the Appendix "Switching xmh's editor".

------------------------------
  
Subject: 09.02 Does xmh support subfolders?
From: Steve Malowany <malowany at cenparmi.concordia.ca>
Date: Fri, 1 Mar 1991 13:03:15 -0800

  Yes. Create one by invoking "Create Folder" as usual, and enter
  something like: existing-folder/new-sub-folder. You can then access
  the subfolder by popping up a menu over the "existing-folder" button
  item.

  But:

From: John Cooper <jsc at saxon.Eng.Sun.COM>
Date: Fri, 1 Mar 1991 13:03:15 -0800

  The R5 version of xmh does *not* handle nested sub-folders.  If you
  create a folder as 'grab/some/bandwidth', xmh displays this
  folder name for the remainder of the session where it was created,
  BUT if you later re-run xmh, the folder is no longer visible to xmh.

  See also MH book section 15.6.2 (15.6.2), or the URL:

    http://www.ics.uci.edu/~mh/book/xmh/orgfol.htm#FolaSub

------------------------------
  
Subject: 09.03 How do I precede included messages with ">" when replying in xmh?
From: Len Makin <len at mel.dit.csiro.au>
Date: Fri, 1 Mar 1991 13:03:15 -0800

  Include the following line in your ~/app-defaults/XMh file:

    Xmh*replyInsertFilter: "sed 's/^/> /'"

  or,

    Xmh.ReplyInsertFilter: $MHLIB/mhl -form repl.filter

From: Andy Linton <andy.linton at comp.vuw.ac.nz>
Date: Fri, 1 Mar 1991 13:03:15 -0800

  Using this means that you can chose to insert the original by use of
  the "Insert" button in the Draft message pane.  See "How do I
  include messages in repl with or without ">"?" to find examples of
  repl.filter.

  See also MH book sections 15.1.4 (15.1.4), 16.3.3 (16.3.3), or the URLs:

    http://www.ics.uci.edu/~mh/book/xmh/senmai.htm#MorRep
    http://www.ics.uci.edu/~mh/book/xmh/resfun.htm#Rep

------------------------------

Subject: Glossary
From: Bill Wohler <wohler at newt.com>
Date: Fri, 1 Mar 1991 13:03:15 -0800

  MH	Mail Handler
  MHLIB	Where MH support routines and files are kept; usually /usr/lib/mh
	or /usr/local/lib/mh.
  POP3	Post Office Protocol, RFC 1938
  MMDF	Multi-channel Memo Distribution Facility
  MIME	Multipurpose Internet Mail Extensions, RFC 1521
  IMAP	Internet Message Access Protocol, RFC 1064, 1176
  TIS	Trusted Information Systems
  PEM	Privacy Enhanced Mail
  PGP	Pretty Good Privacy
  SMTP	Simple Mail Transport Protocol (STD 10; RFC 821)

------------------------------
  
Subject: Acknowledgments
From: Bill Wohler <wohler at newt.com>
Date: Mon, 9 Sep 1996 01:37:27 -0700

I'd like to thank the following people for providing ideas on the
layout of this article:

Joe Wells <jbw at bigbird.bu.edu>        Richard M. Stallman <rms at gnu.org>
David Elliott <dce at smsc.sony.com>     Tom Christiansen <tchrist at perl.com>
Eugene N. Miya <eugene at nas.nasa.gov>

We are also grateful to Kim F. Storm <storm at olicom.dk> and Edward
Vielmetti <emv at ox.com> and the folks mentioned in the text of this
document who have provided answers or other information to make this a
better document.  I regret that it is possible that some names have
been accidently omitted.  I would also like to thank all the readers
of comp.mail.mh.

I'd also like to thank John Romine <jromine at yoyodyne.ICS.UCI.EDU> for
maintaining MH and the MH Web page, Jerry Peek <jpeek at jpeek.com> for
writing the MH bible and for all his hard work with the entire MH
project, Stephen Gildea <gildea at stop.mail-abuse.org> for maintaining mh-e
in years past and always sending me lots of great comments, Kimmo
Suominen <kim at tac.nyc.ny.us> for maintaining the MH patch page, and
Richard Coleman <coleman at math.gatech.edu> for taking MH to nmh.

------------------------------
  
Subject: Switching xmh's editor
From: Andrew Wason <aw at bae.bellcore.com>
Date: Fri, 1 Mar 1991 13:03:15 -0800

#! /bin/sh
# This is a shell archive.  Remove anything before this line, then unpack
# it by saving it into a file and typing "sh file".  To overwrite existing
# files, type "sh file -c".  You can also feed this as standard input via
# unshar, or by typing "sh <file", e.g..  If this archive is complete, you
# will see the following message at the end:
#		"End of shell archive."
# Contents:  README Xmh.ad xmh-command.el xmhcommand xmhemacs
# Wrapped by aw@jello on Fri Nov 15 17:10:34 1991
PATH=/bin:/usr/bin:/usr/ucb ; export PATH
if test -f 'README' -a "${1}" != "-c" ; then
  echo shar: Will not clobber existing file \"'README'\"
else
echo shar: Extracting \"'README'\" \(1269 characters\)
sed "s/^X//" >'README' <<'END_OF_FILE'
XThis is a short description of what to do with each of the enclosed files.
X
XXmh.ad
X  Merge this in with your xmh resources.  If you already have
X  user defined buttons, then you may need to renumber the
X  buttons in this resource file.
X
Xxmh-command.el
X  Byte compile this file and put it in your GNU emacs load-path.
X
Xxmhcommand
Xxmhemacs
X  Put these somewhere in your path.
X
X
XOnce you have installed these, restart the R5 xmh with the new
Xresources.  When you press the repl, forw or comp buttons
Xan xemacs window will come up with your draft message.
X
XOnce you have written your mail, save it and exit GNU emacs (C-xC-c).
XYou will be prompted if you want to send the current message.
XIf you enter 'y', the message will be sent and the output will
Xbe displayed in an emacs window (in case you use -verbose or -snoop).
XThen you will be prompted to exit emacs.  Enter 'y' when you are ready.
X
XIf you answered 'n' when prompted to send the message,
Xthen the draft message will be deleted and emacs will exit.
X
XYou can modify the Xmh.ad resources to add more buttons.
XAny MH command which accepts "+folder msg" can be used
X(e.g. a replx shell script which includes the body of the
Xmessage being replied to can be bound to a replx button)
X
X
XAndrew Wason
Xaw at bae.bellcore.com
END_OF_FILE
if test 1269 -ne `wc -c <'README'`; then
    echo shar: \"'README'\" unpacked with wrong size!
fi
# end of 'README'
fi
if test -f 'Xmh.ad' -a "${1}" != "-c" ; then
  echo shar: Will not clobber existing file \"'Xmh.ad'\"
else
echo shar: Extracting \"'Xmh.ad'\" \(457 characters\)
sed "s/^X//" >'Xmh.ad' <<'END_OF_FILE'
XXmh*CommandButtonCount:			3
X
XXmh*commandBox.button1.label:		repl
XXmh*commandBox.button1.translations:\
X	#override\n\
X	<Btn1Up>:	XmhShellCommand(xmhcommand y repl) unset()
X
XXmh*commandBox.button2.label:		forw
XXmh*commandBox.button2.translations:\
X	#override\n\
X	<Btn1Up>:	XmhShellCommand(xmhcommand y forw) unset()
X
XXmh*commandBox.button3.label:		comp
XXmh*commandBox.button3.translations:\
X	#override\n\
X	<Btn1Up>:	XmhShellCommand(xmhcommand n comp) unset()
END_OF_FILE
if test 457 -ne `wc -c <'Xmh.ad'`; then
    echo shar: \"'Xmh.ad'\" unpacked with wrong size!
fi
# end of 'Xmh.ad'
fi
if test -f 'xmh-command.el' -a "${1}" != "-c" ; then
  echo shar: Will not clobber existing file \"'xmh-command.el'\"
else
echo shar: Extracting \"'xmh-command.el'\" \(1294 characters\)
sed "s/^X//" >'xmh-command.el' <<'END_OF_FILE'
X;;; These functions are for use with xemacs and xmh.
X;;; The R5 xmh has a new action - XmhShellCommand which executes
X;;; a shell command with the current msg as an arg.
X;;; By executing something like:
X;;;    XmhShellCommand(xmhcommand repl)
X;;; you can use xemacs as your editor with xmh.
X;;;
X;;; The following elisp functions perform the basic whatnowproc functionality
X;;; (quitting and deleting, sending)
X;;;
X;;; Andrew Wason  aw at bae.bellcore.com
X
X
X;;; Override C-xC-c
X(define-key indented-text-mode-map "\C-x\C-c" 'xmh-command-send-or-delete)
X
X
X(setq mhdraft (getenv "mhdraft"))	; save the filename of the draft
X
X
X(find-file mhdraft)			; load the draft letter
X(indented-text-mode)
X(setq draft-buffer (current-buffer))	; save the buffer the draft is in
X
X
X(defun xmh-command-send-or-delete ()
X  "Prompt to send or delete letter, then quit."
X  (interactive)
X  (set-buffer draft-buffer)
X  (if (y-or-n-p "Send message? ")
X      (progn
X	(save-buffer)				; save the draft buffer
X	(message "Sending...")
X	(pop-to-buffer "MH mail delivery"); pop to a buffer for "send" output
X	(erase-buffer)
X	(call-process "send" nil t t mhdraft)	; call MH "send"
X	(if (y-or-n-p "Exit? ")
X	    (kill-emacs)))			; exit emacs
X    (delete-file mhdraft)			; delete the draft letter
X    (kill-emacs)))				; exit emacs
END_OF_FILE
if test 1294 -ne `wc -c <'xmh-command.el'`; then
    echo shar: \"'xmh-command.el'\" unpacked with wrong size!
fi
# end of 'xmh-command.el'
fi
if test -f 'xmhcommand' -a "${1}" != "-c" ; then
  echo shar: Will not clobber existing file \"'xmhcommand'\"
else
echo shar: Extracting \"'xmhcommand'\" \(669 characters\)
sed "s/^X//" >'xmhcommand' <<'END_OF_FILE'
X#!/bin/sh
X# This shell should be invoked by the xmh XmhShellCommand() action as
X#   XmhShellCommand(xmhcommand y repl)
X#   XmhShellCommand(xmhcommand n comp) etc.
X# If the second arg is y, then the message list will be used.
X
X# We invoke the passed MH command on the identified message
X# (we must strip the message number and folder from the pathname)
X(if [ $1 = "y" ]
Xthen
X	$2 -whatnowproc xmhemacs +`dirname \`echo $3 | \
X		sed "s;\\\`mhpath +\\\`/;;"\`` `basename $3`
X
X# You can use this more readable version instead if you have ksh
X#	$2 -whatnowproc xmhemacs +$(dirname $(echo $3 | \
X#		sed "s;$(mhpath +)/;;")) $(basename $3)
X
Xelse
X	$2 -whatnowproc xmhemacs
Xfi)&
END_OF_FILE
if test 669 -ne `wc -c <'xmhcommand'`; then
    echo shar: \"'xmhcommand'\" unpacked with wrong size!
fi
chmod +x 'xmhcommand'
# end of 'xmhcommand'
fi
if test -f 'xmhemacs' -a "${1}" != "-c" ; then
  echo shar: Will not clobber existing file \"'xmhemacs'\"
else
echo shar: Extracting \"'xmhemacs'\" \(116 characters\)
sed "s/^X//" >'xmhemacs' <<'END_OF_FILE'
X#!/bin/sh
X# Invoke xemacs and load the xmh-command.el stuff.
X# xmhemacs is used by xmhcommand
Xxemacs -l xmh-command
END_OF_FILE
if test 116 -ne `wc -c <'xmhemacs'`; then
    echo shar: \"'xmhemacs'\" unpacked with wrong size!
fi
chmod +x 'xmhemacs'
# end of 'xmhemacs'
fi
echo shar: End of shell archive.
exit 0

------------------------------
  
Subject: babyl2mh.pl
From: Vivek Khera <khera at cs.duke.edu>
Date: Fri, 1 Mar 1991 13:03:15 -0800

#!/usr/gnu/bin/perl
# incorporate an RMAIL babyl file into an MH folder
#
# usage: babyl2mh +folder babyl-file
#
# V. Khera <khera at cs.duke.edu> 17-JUL-1991

# where to find rcvstore
$rcvstore = "/usr/local/lib/mh/rcvstore";

#
# pull out command line args
#
die "usage: babyl2mh +folder babyl-file\n" unless @ARGV == 2;

$folder = shift;
# make sure folder name starts with a "+"
(substr($folder,0,1) eq "+") || (substr($folder,0,0) = "+");
$bfname = shift;

print "Incorporating RMAIL file $bfname into MH folder $folder\n";

#
# read in babyl file.
#
$/ = "\037";	# this separates the records in a babyl file
$* = 1;		# records are multi-lines

open(BABYL,$bfname) || die "Couldn't open $bfname\n";

$_ = <BABYL>;	# discard header.

$msgnum = 0;

while (<BABYL>) {
  chop;		# get rid of delimeter
  s/\f(.|\n)*\*\*\* EOOH \*\*\*\n//;	# remove duplicate header information
  open(RCVSTORE,"|" . $rcvstore . " $folder");
  print RCVSTORE $_;
  $msgnum++;
  print "Message $msgnum done.\n";
}

------------------------------
  
Subject: inco - babyl to MH converter
From: Juergen Nickelsen <nickel at cs.tu-berlin.de>
Date: Fri, 1 Mar 1991 13:03:15 -0800

#!/bin/sh
# Usage: inco [from [folder]]
# "from" defaults to $HOME/Mail/outbound, "folder" to +inbox.

lispfile=/tmp/inco.$$.el
input=${1-$HOME/Mail/outbound}
tmpmbox=/tmp/inc.$$.mbox
folder=${2-+inbox}

if [ $# -ge 3 ]; then
	echo Usage: `basename $0` [ from [ folder ]]
	exit 2
fi

trap "rm -f $lispfile $tmpmbox ; exit 1" 1 2 15

touch $tmpmbox
chmod 600 $tmpmbox

echo '(rmail-input "'$input'")
(rmail-last-message)
(setq last (rmail-what-message))
(rmail-show-message 1)
(while (not (equal (rmail-what-message) last))
  (rmail-output "'$tmpmbox'")
  (rmail-delete-forward nil))
(rmail-output "'$tmpmbox'")
(kill-buffer (current-buffer))
' > $lispfile

emacs -batch -l $lispfile
inc -file $tmpmbox $folder

> $input
rm -f $lispfile $tmpmbox

------------------------------
  
Subject: t2h - add hyperlinks to message viewed
From: TANAKA Tomoyuki <tanaka at step.mother.com>
Date: Mon, 13 Sep 1999 11:35:43 -0600

#! /bin/sed -f
# "t2h" by TT  news:alt.tanaka-tomoyuki  http://listen.to/TT
# USE: t2h <file.txt >file.html
# Or:  show | t2h | lynx -

s/&/\&amp;/g
s/</\&lt;/g
s/>/\&gt;/g

s/http:[^ "&)   ]*/<a href="&">&<\/a>/g
s/news:[^ "&)   ]*/<a href="&">&<\/a>/g
s/ftp:[^ "&)    ]*/<a href="&">&<\/a>/g
s/telnet:[^ "&) ]*/<a href="&">&<\/a>/g

1i\
<PRE>

$a\
</PRE>

------------------------------
  
Subject: srvrsmtp.c patch
From: Paul Pomes <ppomes at Qualcomm.com>
Date: Fri, 1 Mar 1991 13:03:15 -0800

>From the 5.67 sources:

  *** srvrsmtp.c-	Mon Feb 22 12:25:54 1993
  --- srvrsmtp.c	Mon Feb 22 12:29:09 1993
  ***************
  *** 384,389 ****
  --- 384,395 ----
			  message("250", "Reset state");
			  if (InChild)
				  finis();
  +
  +			  /* clean up a bit if running in parent */
  +			  hasmail = FALSE;
  +			  dropenvelope(CurEnv);
  +			  CurEnv = newenvelope(CurEnv);
  +			  CurEnv->e_flags = BlankEnvelope.e_flags;
			  break;

		    case CMDVRFY:		/* vrfy -- verify address */

------------------------------
  
Subject: IRIX config file
From: Jack Repenning <jackr at informix.com>
Date: 25 Jul 1995 02:35:41 GMT

# Irix 5.3 (based on examples/sys5r4)
bboards	on
bin	/usr/local/bin/mh
cc	cc
ccoptions -g
chown /bin/chown
curses	-lcurses
etc	/usr/local/lib/mh
ldoptions -L/usr/local/lib/mh
mail	/usr/mail
mailgroup: mail
manuals	local
mts	sendmail/smtp
pop on
popdir /usr/local/bin
ranlib off
#sharedlib sys5
#slibdir /usr/local/lib/mh
signal void
sprintf	int
options BIND
options DBMPWD
options DUMB
options FOLDPROT='"0700"'
options MHE
options MHRC
options MIME
options MORE='"/usr/bsd/more"'
options MSGPROT='"0600"'
options RENAME
options RPATHS
options SBACKUP='"\\#"'
#options SENDMTS
options SGI
#options SMTP
options SOCKETS
options	SVR4
options	SYS5
options	SYS5DIR
options UNISTD
options _XOPEN_SOURCE
options VSPRINTF

From: David Paschich <dpassage at bigbook.com>
Date: 23 Apr 96 21:27:12 GMT

# @(#)$Id: mh.faq,v 2001.07.2.1 2001/07/23 06:33:32 wohler Exp $
# a 4.2BSD VAX system running SendMail
bin	/usr/local/bin/mh
bboards	off
etc	/usr/local/lib/mh
mail	/var/mail
manuals	local
mandir	/usr/local/man
chown	/sbin/chown
ranlib	off
mts	sendmail
signal	void
options	BIND LOCKF FOLDPROT='"0700"' MHE MHRC MORE='"/usr/bsd/more"'
options MSGPROT='"0600"' RPATHS SENDMTS SGI SMTP SOCKETS SYS5
options TYPESIG="void" ncr MIME VSPRINTF UNISTD SYSVR4 SYS5DIR

------------------------------
  
Subject: HP-UX 10.20 config file
From: Marko Heikkinen <hema at iki.fi>
Date: 06 Jan 1997 17:19:07 +0000

bin     /opt/mail/bin
bboards on
etc     /opt/mail/lib/mh
editor  prompter
remove  mv -f
mail    /var/mail
mandir  /opt/man
manuals standard
chown   /bin/chown
cc      cc
ccoptions       +DA1.0 +DS1.0
curses  -lcurses
mts     sendmail/smtp
pop     off
slibdir: /opt/mail/lib
options SYS5
options MHE 
options MIME
options ATZ
options BIND
options MHE
options MIME
options ATZ
options BIND
options MHE
options MHRC
options MORE='"/opt/gnu/bin/less"'
options MSGPROT='"0600"'
options NDIR
options NTOHLSWAP
options POPUUMBOX
options SOCKETS
options SYS5
options TZNAME
options TYPESIG=void
options VSPRINTF
options WHATNOW
options _STRINGS
signal void
curses  -lcurses -ltermlib
sprintf int

------------------------------

Subject: Removing duplicate messages (Bourne)
From: Jerry Peek <jpeek at jpeek.com>
Date: 20 Nov 1995 18:51:24 GMT

  Here's a simple-minded Bourne shell version.  It uses
  "scan" to get the message number and message-id of each message.  If
  a message has the same message-id as the previous message, the
  script adds its message number to the "remove" shell variable.


	#!/bin/sh
	lastmsgid=hahahaha
	remove=
	scan -width 300 -format '%(msg) %{message-id}' |
	while read msg msgid; do
	    if [ "$msgid" = "$lastmsgid" ]; then
		remove="$remove $msg"
	    else
		lastmsgid="$msgid"
	    fi
	done
	rmm $remove

  That's pretty simple-minded.  For example, if the $remove variable
  gets too big, your system may complain.  And I'm sure there are some
  more-efficient ways to find the list of duplicate message-ids.  But
  that's the idea.
  
Subject: Removing duplicate messages (Perl)
From: rtor at ansa.co.uk (Owen Rees)
Date: 20 Nov 1995 12:39:47 GMT

  I wrote a perl script to do this some time ago. All the usual dire
  warnings about destructive technology apply - take a backup, do it on
  a copy, try it on a small test case first etc. Don't use this script
  unless you are prepared to accept the consequences.

#!/usr/local/bin/perl

$version = "rmmdup 1";

if (@ARGV == 0) { $folder = ""; }
elsif (@ARGV == 1) { $folder = $ARGV[0];
                     unless ( $folder =~ /^\+.+$/ )
                      { die "usage $0 [+folder]\n"; };
                   }
else { die "usage $0 [+folder]\n"; };

$rmmlist = "";

open (scan, "scan $folder -format '%(msg) %{message-id}'|");
while (<scan>)
 { if ( ($msg,$msgid) = /^(\d+) (<.*>)$/)
    { if ($msgs{$msgid})
       { print "$msg duplicates $msgs{$msgid}\n";
         $rmmlist .= " $msg";
       }
      else { $msgs{$msgid} = $msg; };
    };
 };
if ( $rmmlist ) { exec "rmm $folder $rmmlist"; };
exit;

Local Variables:
mode: outline
outline-regexp: "^Subject:"
fill-prefix: "  "
End:



Спонсоры:
Слёрм
Inferno Solutions
Hosting by Ihor
Хостинг:

Закладки на сайте
Проследить за страницей
Created 1996-2019 by Maxim Chirkov
Добавить, Поддержать, Вебмастеру