Many of the linmodem drivers are only available as precompiled, binary kernel modules. Generally, modules/binaries transparently function only with the kernel against which they were co-compiled. Therefore, getting a precompiled linmodem driver to work with your particular kernel could be a challenge.
Since the Linux kernel is a dynamically changing beast, it is very unfortunate that many modem/chip vendors have not yet chosen to release source-code versions of their drivers, which would ensure your and our ability to modify these drivers appropriately as kernel source code evolves. Some of the binary modules have been coaxed to function under some later kernel versions using various tricks, as described below; however, even though a module may be rendered functional, it is advisable to use them minimally. Quoting an email from Mark Spieth,
"A driver can never work properly if there are unresolved symbols, as it means something is not going to work. Furthermore, it means that that something that would have been called will call something else in the kernel and this could be anything. This is very bad."
Therefore, you should be careful in using binary modules with a kernel of a different version; proceed at your own risk. If you require above all that your modem function, consider downgrading your kernel to match the module - this is by no means a ridiculous prospect. Despite these warnings, however, many others have used mismatched binary modules and kernels with only minor annoyances ( such as the occasional kernel panic ) using tricks and tools such as the following.
Mark Spieth has contributed a progressively improved series of "fixscripts"
for editing a binary module so that version mismatch warnings are eliminated.
Insertion of the "fixed" module then proceeds without the forcing flag, i.e. simply
insmod module_name. Later versions also rename module symbols
to match those exported by the kernel, so that "Unresolved symbols" errors
are not returned by the test
depmod -e. It must be emphasized that this
change is almost entirely cosmetic - it is still recommended that the module be used
To use the fixscript on, for example, the (now-deprecated) binary Lucent module ltmodem.o,
make a working directory such as
Obtain the latest fixscript from
Save the file as
View it with
less or your favorite text editor to check that DOS hard stops were not
accidentally acquired. They look like bold M, underlined M, or ^M depending upon your
viewer/editor. NOTE: the viewer
more does NOT display these DOS newlines.
file executable with
chmod +x fixscript.
Generate a "fixed" module with, i.e.,
./fixscript ltmodem.o ltmodem2217.o
No errors should be generated by testing the module dependencies with
depmod -e ltmodem2217.o
and insertion should succeed with a simple, non-forced,
The "source code" supplied with some PCTel modules (a small C file) performs similar masquerading when compiled and linked with the binary libraries in those packages; unlike the partially-open-source Lucent driver, it does not compensate for any actual changes to the kernel interface.
In his quest to get the original, binary-only Lucent LT modem driver (version 5.68) working with kernels later than 2.2.14, Mark Spieth noticed that one simple change in the Linux kernel source fixed the major incompatibilities incurred between the 2.2.14 to 2.2.16 kernel versions. This patch is no longer necessary when using the partial source/binary Lucent driver (version 5.78), but it remains useful for those with other modems whose drivers are compiled against pre-2.2.15 kernels.
The patched 2.2.17
tty.h and some 2.2.17 kernel packages compiled
with this patch are available from
If you want to do the edit yourself, the line to shift is in the structure
include/linux/tty.h; it has an extra member
poll_wait in later kernels.
Move this member to the bottom of the structure, so that the remaining offsets
will then be the same as those in versions earlier than 2.2.15, and thus be
compatible with the precompiled kernel module. You will need to recompile
your kernel and modules after making this change to the source.
ppp.ofrom Kernel 2.2.14
A trick exists for using the binary modules with kernels later than 2.2.15 which does
not require kernel recompilation; however, following the discovery
tty.h patch described above, this trick is no longer necessary nor
recommended. The trick is to
/lib/modules/net/ppp.o module with one from kernel
Hebeisen (cth(at)sfu.ca) reported that the use of ppp.o version 2.2.14 rather
than that of version 2.2.16 with the Lucent module provided functionality
under 2.2.16 kernels. Willie Green (willjr(at)lcc.net) confirmed that this trick works
also with the ESS module. After simple insertion of a supporting version-matched module:
insmod slhcthe mismatched ppp.o from 2.2.14 source is inserted
insmod -f ppp.oWe wish to emphasize that this trick with forced insertion is less stable than the easy and more effective change to the kernel source file
tty.h, as described above.
Закладки на сайте
Проследить за страницей
Created 1996-2023 by Maxim Chirkov
Добавить, Поддержать, Вебмастеру