The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Поиск:  Каталог документации

6. Commonly asked Questions

Here are a collection of commonly asked questions that arise from time to time on the linux-tr mailing list. If your question isn't answered here or elsewhere in this document, feel free to ask away on the mailing list.

Q: DHCP doesn't work with my Token Ring adapter.
Q: I can't set the LAA on my adapter with ifconfig tr0 hw tr 4000DEADBEEF.
Q: My Linux machine is on a bridged network and I'm having connectivity issues with machine beyond the bridge.
Q: Can I use a Linux machine to bridge between token ring and ethernet ?
Q: OK, if I can't bridge, how do I connect my Token Ring and ethernet networks ?

Q: DHCP doesn't work with my Token Ring adapter.

A: Certain dhcp servers and clients do not work properly with token ring drivers. This is especially true with the 2.4 kernels. During the development of the 2.3.x series of kernels the internal type for token ring was changed to accomodate multicast support over token ring. The solution is to upgrade your dhcp client/server to a version that supports token ring and/or the latest kernel versions.

Q: I can't set the LAA on my adapter with ifconfig tr0 hw tr 4000DEADBEEF.

A: Firstly, double check that your adapter/driver support setting the LAA, and that you've supplied a valid LAA. Also, most drivers will only allow this to be set before the adapter is opened onto the ring. Again, this is related to the change in the internal type for token ring in the 2.4 kernels. A patch is available from the web site for nettools that fixes this and allows the LAA to be set.

Q: My Linux machine is on a bridged network and I'm having connectivity issues with machine beyond the bridge.

A: The token ring source routing code in the kernel uses the spanning tree algorithm. Contact your network administrator to enable this protocol on the bridges.

Q: Can I use a Linux machine to bridge between token ring and ethernet ?

A: The simply answer in no. Briding network topologies in software is incredibly complicated and while it is possibly, nobody has written the code to do it. If you must bridge there are several manufacturers that produce hardware bridges (most notably Cisco).

Q: OK, if I can't bridge, how do I connect my Token Ring and ethernet networks ?

A: A cheap linux box with a token ring and ethernet adapter makes an excellent router. There is no difference between setting up a token ring/ethernet router and an ethernet/ethernet router. You can do masquerading (NAT) and filtering on the router as per usual. For more details see the Netfilter howto.




Партнёры:
PostgresPro
Inferno Solutions
Hosting by Hoster.ru
Хостинг:

Закладки на сайте
Проследить за страницей
Created 1996-2024 by Maxim Chirkov
Добавить, Поддержать, Вебмастеру