The OpenNET Project / Index page

[ новости /+++ | форум | wiki | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

DBD::mysql (3)
  • >> DBD::mysql (3) ( Разные man: Библиотечные вызовы )
  •  

    NAME

    DBD::mysql - MySQL driver for the Perl5 Database Interface (DBI)
     
    

    SYNOPSIS

        use DBI;
    
    

        $dsn = "DBI:mysql:database=$database;host=$hostname;port=$port";
    
    

        $dbh = DBI->connect($dsn, $user, $password);
    
    

        $drh = DBI->install_driver("mysql");
        @databases = DBI->data_sources("mysql");
           or
        @databases = DBI->data_sources("mysql",
                                       {"host" => $host, "port" => $port});
    
    

        $sth = $dbh->prepare("SELECT * FROM foo WHERE bla");
           or
        $sth = $dbh->prepare("LISTFIELDS $table");
           or
        $sth = $dbh->prepare("LISTINDEX $table $index");
        $sth->execute;
        $numRows = $sth->rows;
        $numFields = $sth->{'NUM_OF_FIELDS'};
        $sth->finish;
    
    

        $rc = $drh->func('createdb', $database, $host, $user, $password, 'admin');
        $rc = $drh->func('dropdb', $database, $host, $user, $password, 'admin');
        $rc = $drh->func('shutdown', $host, $user, $password, 'admin');
        $rc = $drh->func('reload', $host, $user, $password, 'admin');
    
    

        $rc = $dbh->func('createdb', $database, 'admin');
        $rc = $dbh->func('dropdb', $database, 'admin');
        $rc = $dbh->func('shutdown', 'admin');
        $rc = $dbh->func('reload', 'admin');
    
    
     

    EXAMPLE

      #!/usr/bin/perl
    
    

      use strict;
      use DBI();
    
    

      # Connect to the database.
      my $dbh = DBI->connect("DBI:mysql:database=test;host=localhost",
                             "joe", "joe's password",
                             {'RaiseError' => 1});
    
    

      # Drop table 'foo'. This may fail, if 'foo' doesn't exist.
      # Thus we put an eval around it.
      eval { $dbh->do("DROP TABLE foo") };
      print "Dropping foo failed: $@\n" if $@;
    
    

      # Create a new table 'foo'. This must not fail, thus we don't
      # catch errors.
      $dbh->do("CREATE TABLE foo (id INTEGER, name VARCHAR(20))");
    
    

      # INSERT some data into 'foo'. We are using $dbh->quote() for
      # quoting the name.
      $dbh->do("INSERT INTO foo VALUES (1, " . $dbh->quote("Tim") . ")");
    
    

      # Same thing, but using placeholders
      $dbh->do("INSERT INTO foo VALUES (?, ?)", undef, 2, "Jochen");
    
    

      # Now retrieve data from the table.
      my $sth = $dbh->prepare("SELECT * FROM foo");
      $sth->execute();
      while (my $ref = $sth->fetchrow_hashref()) {
        print "Found a row: id = $ref->{'id'}, name = $ref->{'name'}\n";
      }
      $sth->finish();
    
    

      # Disconnect from the database.
      $dbh->disconnect();
    
    
     

    DESCRIPTION

    DBD::mysql is the Perl5 Database Interface driver for the MySQL database. In other words: DBD::mysql is an interface between the Perl programming language and the MySQL programming API that comes with the MySQL relational database management system. Most functions provided by this programming API are supported. Some rarely used functions are missing, mainly because noone ever requested them. :-)

    In what follows we first discuss the use of DBD::mysql, because this is what you will need the most. For installation, see the sections on INSTALLATION, and ``WIN32 INSTALLATION'' below. See EXAMPLE for a simple example above.

    From perl you activate the interface with the statement

        use DBI;
    
    

    After that you can connect to multiple MySQL database servers and send multiple queries to any of them via a simple object oriented interface. Two types of objects are available: database handles and statement handles. Perl returns a database handle to the connect method like so:

      $dbh = DBI->connect("DBI:mysql:database=$db;host=$host",
                          $user, $password, {RaiseError => 1});
    
    

    Once you have connected to a database, you can can execute SQL statements with:

      my $query = sprintf("INSERT INTO foo VALUES (%d, %s)",
                          $number, $dbh->quote("name"));
      $dbh->do($query);
    
    

    See DBI(3) for details on the quote and do methods. An alternative approach is

      $dbh->do("INSERT INTO foo VALUES (?, ?)", undef,
               $number, $name);
    
    

    in which case the quote method is executed automatically. See also the bind_param method in DBI(3). See ``DATABASE HANDLES'' below for more details on database handles.

    If you want to retrieve results, you need to create a so-called statement handle with:

      $sth = $dbh->prepare("SELECT * FROM $table");
      $sth->execute();
    
    

    This statement handle can be used for multiple things. First of all you can retreive a row of data:

      my $row = $sth->fetchow_hashref();
    
    

    If your table has columns ID and NAME, then $row will be hash ref with keys ID and NAME. See ``STATEMENT HANDLES'' below for more details on statement handles.

    But now for a more formal approach:  

    Class Methods

    connect
        use DBI;
    
    

        $dsn = "DBI:mysql:$database";
        $dsn = "DBI:mysql:database=$database;host=$hostname";
        $dsn = "DBI:mysql:database=$database;host=$hostname;port=$port";
    
    

        $dbh = DBI->connect($dsn, $user, $password);
    
    

    A "database" must always be specified.

    host
    port
    The hostname, if not specified or specified as '', will default to an MySQL daemon running on the local machine on the default port for the UNIX socket.

    Should the MySQL daemon be running on a non-standard port number, you may explicitly state the port number to connect to in the "hostname" argument, by concatenating the hostname and port number together separated by a colon ( ":" ) character or by using the "port" argument.

    mysql_client_found_rows
    Enables (TRUE value) or disables (FALSE value) the flag CLIENT_FOUND_ROWS while connecting to the MySQL server. This has a somewhat funny effect: Without mysql_client_found_rows, if you perform a query like

      UPDATE $table SET id = 1 WHERE id = 1
    
    

    then the MySQL engine will always return 0, because no rows have changed. With mysql_client_found_rows however, it will return the number of rows that have an id 1, as some people are expecting. (At least for compatibility to other engines.)

    mysql_compression
    As of MySQL 3.22.3, a new feature is supported: If your DSN contains the option ``mysql_compression=1'', then the communication between client and server will be compressed.
    mysql_connect_timeout
    If your DSN contains the option ``mysql_connect_timeout=##'', the connect request to the server will timeout if it has not been successful after the given number of seconds.
    mysql_read_default_file
    mysql_read_default_group
    These options can be used to read a config file like /etc/my.cnf or ~/.my.cnf. By default MySQL's C client library doesn't use any config files unlike the client programs (mysql, mysqladmin, ...) that do, but outside of the C client library. Thus you need to explicitly request reading a config file, as in

        $dsn = "DBI:mysql:test;mysql_read_default_file=/home/joe/my.cnf";
        $dbh = DBI->connect($dsn, $user, $password)
    
    

    The option mysql_read_default_group can be used to specify the default group in the config file: Usually this is the client group, but see the following example:

        [client]
        host=localhost
    
    

        [perl]
        host=perlhost
    
    

    (Note the order of the entries! The example won't work, if you reverse the [client] and [perl] sections!)

    If you read this config file, then you'll be typically connected to localhost. However, by using

        $dsn = "DBI:mysql:test;mysql_read_default_group=perl;"
            . "mysql_read_default_file=/home/joe/my.cnf";
        $dbh = DBI->connect($dsn, $user, $password);
    
    

    you'll be connected to perlhost. Note that if you specify a default group and do not specify a file, then the default config files will all be read. See the documentation of the C function mysql_options() for details.

    mysql_socket
    As of MySQL 3.21.15, it is possible to choose the Unix socket that is used for connecting to the server. This is done, for example, with

        mysql_socket=/dev/mysql
    
    

    Usually there's no need for this option, unless you are using another location for the socket than that built into the client.

    mysql_ssl
    A true value turns on the CLIENT_SSL flag when connecting to the MySQL database:

      mysql_ssl=1
    
    

    This means that your communication with the server will be encrypted.

    If you turn mysql_ssl on, you might also wish to use the following flags:

    mysql_ssl_client_key
    mysql_ssl_client_cert
    mysql_ssl_ca_file
    mysql_ssl_ca_path
    mysql_ssl_cipher
    These are used to specify the respective parameters of a call to mysql_ssl_set, if mysql_ssl is turned on.
    mysql_local_infile
    As of MySQL 3.23.49, the LOCAL capability for LOAD DATA may be disabled in the MySQL client library by default. If your DSN contains the option ``mysql_local_infile=1'', LOAD DATA LOCAL will be enabled. (However, this option is *ineffective* if the server has also been configured to disallow LOCAL.)
    Prepared statement support (server side prepare)
    To use server side prepared statements, all you need to do is set the variable mysql_server_prepare in the connect:

    $dbh = DBI->connect(
                        ``DBI:mysql:database=test;host=localhost:mysql_server_prepare=1'',
                        "``,
                        ''",
                        { RaiseError => 1, AutoCommit => 1 }
                        );

    To make sure that the 'make test' step tests whether server prepare works, you just need to export the env variable MYSQL_SERVER_PREPARE:

    export MYSQL_SERVER_PREPARE=1

    Test first without server side prepare, then with.

    mysql_embedded_options
    The option <mysql_embedded_options> can be used to pass 'command-line' options to embedded server.

    Example:

    $testdsn=``DBI:mysqlEmb:database=test;mysql_embedded_options=--help,--verbose'';

    mysql_embedded_groups
    The option <mysql_embedded_groups> can be used to specify the groups in the config file(my.cnf) which will be used to get options for embedded server. If not specified [server] and [embedded] groups will be used.

    Example:

    $testdsn=``DBI:mysqlEmb:database=test;mysql_embedded_groups=embedded_server,common'';

     

    Private MetaData Methods

    ListDBs
        my $drh = DBI->install_driver("mysql");
        @dbs = $drh->func("$hostname:$port", '_ListDBs');
        @dbs = $drh->func($hostname, $port, '_ListDBs');
        @dbs = $dbh->func('_ListDBs');
    
    

    Returns a list of all databases managed by the MySQL daemon running on $hostname, port $port. This method is rarely needed for databases running on "localhost": You should use the portable method

        @dbs = DBI->data_sources("mysql");
    
    

    whenever possible. It is a design problem of this method, that there's no way of supplying a host name or port number to "data_sources", that's the only reason why we still support "ListDBs". :-(

     

    Server Administration

    admin
        $rc = $drh->func("createdb", $dbname, [host, user, password,], 'admin');
        $rc = $drh->func("dropdb", $dbname, [host, user, password,], 'admin');
        $rc = $drh->func("shutdown", [host, user, password,], 'admin');
        $rc = $drh->func("reload", [host, user, password,], 'admin');
    
    

          or
    
    

        $rc = $dbh->func("createdb", $dbname, 'admin');
        $rc = $dbh->func("dropdb", $dbname, 'admin');
        $rc = $dbh->func("shutdown", 'admin');
        $rc = $dbh->func("reload", 'admin');
    
    

    For server administration you need a server connection. For obtaining this connection you have two options: Either use a driver handle (drh) and supply the appropriate arguments (host, defaults localhost, user, defaults to '' and password, defaults to ''). A driver handle can be obtained with

        $drh = DBI->install_driver('mysql');
    
    

    Otherwise reuse the existing connection of a database handle (dbh).

    There's only one function available for administrative purposes, comparable to the m(y)sqladmin programs. The command being execute depends on the first argument:

    createdb
    Creates the database $dbname. Equivalent to ``m(y)sqladmin create $dbname''.
    dropdb
    Drops the database $dbname. Equivalent to ``m(y)sqladmin drop $dbname''.

    It should be noted that database deletion is not prompted for in any way. Nor is it undo-able from DBI.

        Once you issue the dropDB() method, the database will be gone!
    
    

    These method should be used at your own risk.

    shutdown
    Silently shuts down the database engine. (Without prompting!) Equivalent to ``m(y)sqladmin shutdown''.
    reload
    Reloads the servers configuration files and/or tables. This can be particularly important if you modify access privileges or create new users.
     

    DATABASE HANDLES

    The DBD::mysql driver supports the following attributes of database handles (read only):

      $errno = $dbh->{'mysql_errno'};
      $error = $dbh->{'mysql_error};
      $info = $dbh->{'mysql_hostinfo'};
      $info = $dbh->{'mysql_info'};
      $insertid = $dbh->{'mysql_insertid'};
      $info = $dbh->{'mysql_protoinfo'};
      $info = $dbh->{'mysql_serverinfo'};
      $info = $dbh->{'mysql_stat'};
      $threadId = $dbh->{'mysql_thread_id'};
    
    

    These correspond to mysql_errno(), mysql_error(), mysql_get_host_info(), mysql_info(), mysql_insert_id(), mysql_get_proto_info(), mysql_get_server_info(), mysql_stat() and mysql_thread_id(), respectively.

     $info_hashref = $dhb->{mysql_dbd_stats}
    
    

    DBD::mysql keeps track of some statistics in the mysql_dbd_stats attribute. The following stats are being maintained:

    auto_reconnects_ok
    The number of times that DBD::mysql successfully reconnected to the mysql server.
    auto_reconnects_failed
    The number of times that DBD::mysql tried to reconnect to mysql but failed.

    The DBD::mysql driver also supports the following attribute(s) of database handles (read/write):

     $bool_value = $dbh->{mysql_auto_reconnect};
     $dbh->{mysql_auto_reconnect} = $AutoReconnect ? 1 : 0;
    
    
    mysql_auto_reconnect
    This attribute determines whether DBD::mysql will automatically reconnect to mysql if the connection be lost. This feature defaults to off; however, if either the GATEWAY_INTERFACE or MOD_PERL envionment variable is set, DBD::mysql will turn mysql_auto_reconnect on. Setting mysql_auto_reconnect to on is not advised if 'lock tables' is used because if DBD::mysql reconnect to mysql all table locks will be lost. This attribute is ignored when AutoCommit is turned off, and when AutoCommit is turned off, DBD::mysql will not automatically reconnect to the server.
    mysql_use_result
    This attribute forces the driver to use mysql_use_result rather than mysql_store_result. The former is faster and less memory consuming, but tends to block other processes. (That's why mysql_store_result is the default.)

    It is possible to set default value of the "mysql_use_result" attribute for $dbh using several ways:

     - through DSN
    
    

       $dbh= DBI->connect("DBI:mysql:test;mysql_use_result=1", "root", "");
    
    

     - after creation of database handle
    
    

       $dbh->{'mysql_use_result'}=0; #disable
       $dbh->{'mysql_use_result'}=1; #enable
    
    

    It is possible to set/unset the "mysql_use_result" attribute after creation of statement handle. See below.  

    STATEMENT HANDLES

    The statement handles of DBD::mysql support a number of attributes. You access these by using, for example,

      my $numFields = $sth->{'NUM_OF_FIELDS'};
    
    

    Note, that most attributes are valid only after a successfull execute. An "undef" value will returned in that case. The most important exception is the "mysql_use_result" attribute: This forces the driver to use mysql_use_result rather than mysql_store_result. The former is faster and less memory consuming, but tends to block other processes. (That's why mysql_store_result is the default.)

    To set the "mysql_use_result" attribute, use either of the following:

      my $sth = $dbh->prepare("QUERY", { "mysql_use_result" => 1});
    
    

    or

      my $sth = $dbh->prepare("QUERY");
      $sth->{"mysql_use_result"} = 1;
    
    

    Column dependent attributes, for example NAME, the column names, are returned as a reference to an array. The array indices are corresponding to the indices of the arrays returned by fetchrow and similar methods. For example the following code will print a header of table names together with all rows:

      my $sth = $dbh->prepare("SELECT * FROM $table");
      if (!$sth) {
          die "Error:" . $dbh->errstr . "\n";
      }
      if (!$sth->execute) {
          die "Error:" . $sth->errstr . "\n";
      }
      my $names = $sth->{'NAME'};
      my $numFields = $sth->{'NUM_OF_FIELDS'};
      for (my $i = 0;  $i < $numFields;  $i++) {
          printf("%s%s", $i ? "," : "", $$names[$i]);
      }
      print "\n";
      while (my $ref = $sth->fetchrow_arrayref) {
          for (my $i = 0;  $i < $numFields;  $i++) {
              printf("%s%s", $i ? "," : "", $$ref[$i]);
          }
          print "\n";
      }
    
    

    For portable applications you should restrict yourself to attributes with capitalized or mixed case names. Lower case attribute names are private to DBD::mysql. The attribute list includes:

    ChopBlanks
    this attribute determines whether a fetchrow will chop preceding and trailing blanks off the column values. Chopping blanks does not have impact on the max_length attribute.
    mysql_insertid
    MySQL has the ability to choose unique key values automatically. If this happened, the new ID will be stored in this attribute. An alternative way for accessing this attribute is via $dbh->{'mysql_insertid'}. (Note we are using the $dbh in this case!)
    mysql_is_blob
    Reference to an array of boolean values; TRUE indicates, that the respective column is a blob. This attribute is valid for MySQL only.
    mysql_is_key
    Reference to an array of boolean values; TRUE indicates, that the respective column is a key. This is valid for MySQL only.
    mysql_is_num
    Reference to an array of boolean values; TRUE indicates, that the respective column contains numeric values.
    mysql_is_pri_key
    Reference to an array of boolean values; TRUE indicates, that the respective column is a primary key.
    mysql_is_auto_increment
    Reference to an array of boolean values; TRUE indicates that the respective column is an AUTO_INCREMENT column. This is only valid for MySQL.
    mysql_length
    mysql_max_length
    A reference to an array of maximum column sizes. The max_length is the maximum physically present in the result table, length gives the theoretically possible maximum. max_length is valid for MySQL only.
    NAME
    A reference to an array of column names.
    NULLABLE
    A reference to an array of boolean values; TRUE indicates that this column may contain NULL's.
    NUM_OF_FIELDS
    Number of fields returned by a SELECT or LISTFIELDS statement. You may use this for checking whether a statement returned a result: A zero value indicates a non-SELECT statement like INSERT, DELETE or UPDATE.
    mysql_table
    A reference to an array of table names, useful in a JOIN result.
    TYPE
    A reference to an array of column types. The engine's native column types are mapped to portable types like DBI::SQL_INTEGER() or DBI::SQL_VARCHAR(), as good as possible. Not all native types have a meaningfull equivalent, for example DBD::mysql::FIELD_TYPE_INTERVAL is mapped to DBI::SQL_VARCHAR(). If you need the native column types, use mysql_type. See below.
    mysql_type
    A reference to an array of MySQL's native column types, for example DBD::mysql::FIELD_TYPE_SHORT() or DBD::mysql::FIELD_TYPE_STRING(). Use the TYPE attribute, if you want portable types like DBI::SQL_SMALLINT() or DBI::SQL_VARCHAR().
    mysql_type_name
    Similar to mysql, but type names and not numbers are returned. Whenever possible, the ANSI SQL name is preferred.
     

    TRANSACTION SUPPORT

    Beginning with DBD::mysql 2.0416, transactions are supported. The transaction support works as follows:
    *
    By default AutoCommit mode is on, following the DBI specifications.
    *
    If you execute

        $dbh->{'AutoCommit'} = 0;
    
    

    or

        $dbh->{'AutoCommit'} = 1;
    
    

    then the driver will set the MySQL server variable autocommit to 0 or 1, respectively. Switching from 0 to 1 will also issue a COMMIT, following the DBI specifications.

    *
    The methods

        $dbh->rollback();
        $dbh->commit();
    
    

    will issue the commands COMMIT and ROLLBACK, respectively. A ROLLBACK will also be issued if AutoCommit mode is off and the database handles DESTROY method is called. Again, this is following the DBI specifications.

    Given the above, you should note the following:

    *
    You should never change the server variable autocommit manually, unless you are ignoring DBI's transaction support.
    *
    Switching AutoCommit mode from on to off or vice versa may fail. You should always check for errors, when changing AutoCommit mode. The suggested way of doing so is using the DBI flag RaiseError. If you don't like RaiseError, you have to use code like the following:

      $dbh->{'AutoCommit'} = 0;
      if ($dbh->{'AutoCommit'}) {
        # An error occurred!
      }
    
    
    *
    If you detect an error while changing the AutoCommit mode, you should no longer use the database handle. In other words, you should disconnect and reconnect again, because the transaction mode is unpredictable. Alternatively you may verify the transaction mode by checking the value of the server variable autocommit. However, such behaviour isn't portable.
    *
    DBD::mysql has a ``reconnect'' feature that handles the so-called MySQL ``morning bug'': If the server has disconnected, most probably due to a timeout, then by default the driver will reconnect and attempt to execute the same SQL statement again. However, this behaviour is disabled when AutoCommit is off: Otherwise the transaction state would be completely unpredictable after a reconnect.
    *
    The ``reconnect'' feature of DBD::mysql can be toggled by using the mysql_auto_reconnect attribute. This behaviour should be turned off in code that uses LOCK TABLE because if the database server time out and DBD::mysql reconnect, table locks will be lost without any indication of such loss.
     

    MULTITHREADING

    The multithreading capabilities of DBD::mysql depend completely on the underlying C libraries: The modules are working with handle data only, no global variables are accessed or (to the best of my knowledge) thread unsafe functions are called. Thus DBD::mysql is believed to be completely thread safe, if the C libraries are thread safe and you don't share handles among threads.

    The obvious question is: Are the C libraries thread safe? In the case of MySQL the answer is ``mostly'' and, in theory, you should be able to get a ``yes'', if the C library is compiled for being thread safe (By default it isn't.) by passing the option -with-thread-safe-client to configure. See the section on How to make a threadsafe client in the manual.  

    INSTALLATION

    Windows users may skip this section and pass over to ``WIN32 INSTALLATION'' below. Others, go on reading.

    First of all, you do not need an installed MySQL server for installing DBD::mysql. However, you need at least the client libraries and possibly the header files, if you are compiling DBD::mysql from source. In the case of MySQL you can create a client-only version by using the configure option --without-server. If you are using precompiled binaries, then it may be possible to use just selected RPM's like MySQL-client and MySQL-devel or something similar, depending on the distribution.

    First you need to install the DBI module. For using dbimon, a simple DBI shell it is recommended to install Data::ShowTable another Perl module.

    I recommend trying automatic installation via the CPAN module. Try

      perl -MCPAN -e shell
    
    

    If you are using the CPAN module for the first time, it will prompt you a lot of questions. If you finally receive the CPAN prompt, enter

      install Bundle::DBD::mysql
    
    

    If this fails (which may be the case for a number of reasons, for example because you are behind a firewall or don't have network access), you need to do a manual installation. First of all you need to fetch the modules from CPAN search

       http://search.cpan.org/
    
    

    The following modules are required

      DBI
      Data::ShowTable
      DBD::mysql
    
    

    Then enter the following commands (note - versions are just examples):

      gzip -cd DBI-(version).tar.gz | tar xf -
      cd DBI-(version)
      perl Makefile.PL
      make
      make test
      make install
    
    

      cd ..
      gzip -cd Data-ShowTable-(version).tar.gz | tar xf -
      cd Data-ShowTable-(version)
      perl Makefile.PL
      make
      make install
    
    

      cd ..
      gzip -cd DBD-mysql-(version)-tar.gz | tar xf -
      cd DBD-mysql-(version)
      perl Makefile.PL
      make
      make test
      make install
    
    

    During ``perl Makefile.PL'' you will be prompted some questions. Other questions are the directories with header files and libraries. For example, of your file mysql.h is in /usr/include/mysql/mysql.h, then enter the header directory /usr, likewise for /usr/lib/mysql/libmysqlclient.a or /usr/lib/libmysqlclient.so.  

    WIN32 INSTALLATION

    If you are using ActivePerl, you may use ppm to install DBD-mysql. For Perl 5.6, upgrade to Build 623 or later, then it is sufficient to run

      ppm install DBI
      ppm install DBD::mysql
    
    

    If you need an HTTP proxy, you might need to set the environment variable http_proxy, for example like this:

      set http_proxy=http://myproxy.com:8080/
    
    

    As of this writing, DBD::mysql is missing in the ActivePerl 5.8.0 repository. However, Randy Kobes has kindly donated an own distribution and the following might succeed:

      ppm install http://theoryx5.uwinnipeg.ca/ppms/DBD-mysql.ppd
    
    

    Otherwise you definitely *need* a C compiler. And it *must* be the same compiler that was being used for compiling Perl itself. If you don't have a C compiler, the file README.win32 from the Perl source distribution tells you where to obtain freely distributable C compilers like egcs or gcc. The Perl sources are available via CPAN search

        http://search.cpan.org
    
    

    I recommend using the win32clients package for installing DBD::mysql under Win32, available for download on www.tcx.se. The following steps have been required for me:

    -
    The current Perl versions (5.6, as of this writing) do have a problem with detecting the C libraries. I recommend to apply the following patch:

      *** c:\Perl\lib\ExtUtils\Liblist.pm.orig Sat Apr 15 20:03:40 2000
      --- c:\Perl\lib\ExtUtils\Liblist.pm      Sat Apr 15 20:03:45 2000
      ***************
      *** 230,235 ****
      --- 230,239 ----
          # add "$Config{installarchlib}/CORE" to default search path
          push @libpath, "$Config{installarchlib}/CORE";
    
    

      +     if ($VC  and  exists($ENV{LIB})  and  defined($ENV{LIB})) {
      +       push(@libpath, split(/;/, $ENV{LIB}));
      +     }
      +
          foreach (Text::ParseWords::quotewords('\s+', 0, $potential_libs)){
    
    

            $thislib = $_;
    
    
    -
    Extract sources into C:\. This will create a directory C:\mysql with subdirectories include and lib.

    IMPORTANT: Make sure this subdirectory is not shared by other TCX files! In particular do *not* store the MySQL server in the same directory. If the server is already installed in C:\mysql, choose a location like C:\tmp, extract the win32clients there. Note that you can remove this directory entirely once you have installed DBD::mysql.

    -
    Extract the DBD::mysql sources into another directory, for example C:\src\siteperl
    -
    Open a DOS shell and change directory to C:\src\siteperl.
    -
    The next step is only required if you repeat building the modules: Make sure that you have a clean build tree by running

      nmake realclean
    
    

    If you don't have VC++, replace nmake with your flavour of make. If error messages are reported in this step, you may safely ignore them.

    -
    Run

      perl Makefile.PL
    
    

    which will prompt you for some settings. The really important ones are:

      Which DBMS do you want to use?
    
    

    enter a 1 here (MySQL only), and

      Where is your mysql installed? Please tell me the directory that
      contains the subdir include.
    
    

    where you have to enter the win32clients directory, for example C:\mysql or C:\tmp\mysql.

    -
    Continued in the usual way:

      nmake
      nmake install
    
    

    If you want to create a PPM package for the ActiveState Perl version, then modify the above steps as follows: Run

      perl Makefile.PL NAME=DBD-mysql BINARY_LOCATION=DBD-mysql.tar.gz
      nmake ppd
      nmake
    
    

    Once that is done, use tar and gzip (for example those from the CygWin32 distribution) to create an archive:

      mkdir x86
      tar cf x86/DBD-mysql.tar blib
      gzip x86/DBD-mysql.tar
    
    

    Put the files x86/DBD-mysql.tar.gz and DBD-mysql.ppd onto some WWW server and install them by typing

      install http://your.server.name/your/directory/DBD-mysql.ppd
    
    

    in the PPM program.  

    AUTHORS

    A good part of the current version of DBD::mysql is written by Jochen Wiedmann, then was maintained by Rudy Lippan (rlippan@remotelinux.com), and Prepared Statement code written by Alexey Stroganov and Patrick Galbraith, and now maintained by Patrick Galbraith (patg@mysql.com), with the help of various people in the community. The first version's author was Alligator Descartes (descarte@symbolstone.org), who has been aided and abetted by Gary Shea, Andreas Kц╤nig and Tim Bunce amongst others.

    The Mysql module was originally written by Andreas Kц╤nig <koenig@kulturbox.de>. The current version, mainly an emulation layer, is from Jochen Wiedmann.  

    COPYRIGHT

    This module is Large Portions Copyright (c) 2004-2006 MySQL Patrick Galbraith, Alexey Stroganov, Large Portions Copyright (c) 2003-2005 Rudolf Lippan; Large Portions Copyright (c) 1997-2003 Jochen Wiedmann, with code portions Copyright (c)1994-1997 their original authors This module is released under the same license as Perl itself. See the Perl README for details.  

    MAILING LIST SUPPORT

    This module is maintained and supported on a mailing list,

        perl@lists.mysql.com
    
    

    To subscribe to this list, send a mail to

        perl-subscribe@lists.mysql.com
    
    

    or

        perl-digest-subscribe@lists.mysql.com
    
    

    Mailing list archives are available at

        http://www.progressive-comp.com/Lists/?l=msql-mysql-modules
    
    

    Additionally you might try the dbi-user mailing list for questions about DBI and its modules in general. Subscribe via

        http://www.fugue.com/dbi
    
    

    Mailing list archives are at

         http://www.rosat.mpe-garching.mpg.de/mailing-lists/PerlDB-Interest/
         http://outside.organic.com/mail-archives/dbi-users/
         http://www.coe.missouri.edu/~faq/lists/dbi.html
    
    
     

    ADDITIONAL DBI INFORMATION

    Additional information on the DBI project can be found on the World Wide Web at the following URL:

        http://www.symbolstone.org/technology/perl/DBI
    
    

    where documentation, pointers to the mailing lists and mailing list archives and pointers to the most current versions of the modules can be used.

    Information on the DBI interface itself can be gained by typing:

        perldoc DBI
    
    

    right now!


     

    Index

    NAME
    SYNOPSIS
    EXAMPLE
    DESCRIPTION
    Class Methods
    Private MetaData Methods
    Server Administration
    DATABASE HANDLES
    STATEMENT HANDLES
    TRANSACTION SUPPORT
    MULTITHREADING
    INSTALLATION
    WIN32 INSTALLATION
    AUTHORS
    COPYRIGHT
    MAILING LIST SUPPORT
    ADDITIONAL DBI INFORMATION


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру