The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

auth.props (4)
  • >> auth.props (4) ( Solaris man: Специальные файлы /dev/* )
  • 
    NAME
         auth.props -  Sun Ray  enterprise  appliance  authentication
         daemon configuration file
    
    DESCRIPTION
         The auth.props file  contains  the  Sun  Ray  authentication
         manager's  configuration  options. Many of these options are
         not supported and should not be set  to  values  other  than
         their default values.
    
    OPTIONS
         The following options are supported:
    
         adminConfigFile=filename
               This file contains the administrative database  confi-
               guration information.
    
         allowAnnotations=boolean
               UNSUPPORTED. If this option is true then any  applica-
               tion  can  connect  from any IP address and annotate a
               session. Annotations are restricted to  keywords  pre-
               fixed by "x_". Values are not restricted.
    
         allowFWLoad=boolean
               This option specifies whether or not the  utload  com-
               mand  is  allowed  to  download firmware to appliances
               connected to this authentication manager.
    
         allowLANConnections=boolean
               UNSUPPORTED. If this option  is  true  then  appliance
               connections  will be allowed from localhost as well as
               from non-Sun Ray interconnect interfaces.
    
         cbport=portNumber
               UNSUPPORTED. The  authentication  manager  listens  on
               this  port  for connections from the utsessiond daemon
               and other programs, such as utload.
    
         cbtimeout=seconds
               UNSUPPORTED. This option specifies the read timeout in
               seconds for programs that connect to the cbport.
    
         controllers=maximum
               UNSUPPORTED. This option specifies the maximum  number
               of  spare  threads that are available for handling new
               connections from applications such as utload(1M).
    
         enableGroupManager=boolean
               UNSUPPORTED. Flag to turn on the group  manager  func-
               tion.
    
         enableLoadBalancing=boolean
               Flag to turn on group manager load balancing.
    
         enableMulticast=boolean
               UNSUPPORTED. Flag to enable/disable use  of  multicast
               in  group manager. If disabled, group manager will use
               broadcast.
    
         forceSessionLocation=boolean
               UNSUPPORTED. Flag to force use of sessionHost and ses-
               sionPort  settings  from  this  file regardless of the
               wishes of the various authentication modules.
    
         gmDebug=level
               UNSUPPORTED. Group manager debugging level.
    
         gmKeepAliveInterval=seconds
               UNSUPPORTED. The group manager uses this as  the  time
               in seconds between broadcast keepalive messages.
    
         gmport=port
               UNSUPPORTED. The group manager uses this port to  send
               and  receive  keepalive/discovery  messages from other
               auth managers.
    
         gmSignatureFile=file
               The group manager can "sign" messages to  other  group
               managers  based  on  the contents of a signature file.
               Other group managers with the same signature file con-
               tents  are  "trusted".  To be usable, the file must be
               owned by 'root' and must not be readable, writable, or
               executable  by anyone else; it must contain at least 8
               bytes, at least two of which are letters and at  least
               one which is a non-letter printable character.
    
         log=filename
               UNSUPPORTED. This option specifies a  file  that  con-
               tains the log messages.
    
         logAddTimeStamp=boolean
               UNSUPPORTED. Add your own  timestamp  to  syslog  mes-
               sages.  This  may  be  appropriate for debugging or in
               cases where a remote syslog server is being  used  and
               higher resolution timestamps are required.
    
         logFacility=value
               The logFacility can  be  one  of  the  following:kern,
               user,  mail,  daemon,  auth,  syslog, lpr, news, uucp,
               cron, local0, local1, local2, local3, local4,  local5,
               local6, local7
    
         Log files
               Log priorities for different utauthd  message  classes
               can  be one of the following: emerg, alert, crit, err,
               warning, notice, info, debug, OFF.
    
               The message classes are:
    
               logPriClientError=value
    
               logPriDebug=value
    
               logPriNotice=value
    
               logPriWarning=value
    
               logPriConfigError=value
    
               logPriUnexpectedError=value
    
         maxStarting=maximum
               UNSUPPORTED. This option specifies the maximum  number
               of  threads  that  can  be simultaneously initiating a
               session. Additional threads wanting to start or verify
               a  session  will have to wait for some other thread to
               finish starting or verifying a session.
    
         moduleDif=directorName
               UNSUPPORTED. This option specifies the location of the
               authentication modules.
    
         multicastTTL=integer
               UNSUPPORTED.  Time-to-live  parameter  for  forwarding
               multicast  packets.  If  set above one, keepalive mes-
               sages can pass through routers.
    
         noClaimSleepTime=seconds
               UNSUPPORTED. The amount of time in  seconds  to  sleep
               after a token has been offered to all of the authenti-
               cation modules and before notifying the appliance that
               the authentication failed.
    
         policy=filename
               This option specifies the location of the  authentica-
               tion policy specification.
    
         port=portNumber
               The utauthd daemon listens on this  port  for  connec-
               tions from Sun Ray appliances.
    
         remoteSelect=boolean
               If true, the remote server  selection  option  of  the
               utselect(1) command is enabled by default.
    
         reportAllDesktopEvents=boolean
               UNSUPPORTED. If this option is true then  all  desktop
               events  will  be reported instead of being filtered to
               just those events that change the  "exists"  state  of
               the appliance.
    
         restrictSunrayIfs=boolean
               UNSUPPORTED. Flag to  restrict  communication  between
               group  managers  on different hosts to travel over Sun
               Ray network interfaces. If false, group managers  will
               communicate over all interfaces.
    
         selectAtLogin=boolean
               If true, this option enables a  session  startup  mode
               where  a  utselect(1)  screen is presented to the user
               before the CDE login screen. This allows the  user  to
               select a Sun Ray server before logging in.
    
         sessionHost=hostname
               UNSUPPORTED. This option specifies the  host  name  of
               the  server that is running the default utsessiond for
               this authentication manager.
    
         sessionPort=portNumber
               UNSUPPORTED. This option specifies the port number  of
               the  server that is running the default utsessiond for
               this authentication manager.
    
         sessionTypesFile=filename
               This option specifies a file  that  contains  mappings
               from  session  types to the associated session startup
               and shutdown commands.
    
         smtimeout=seconds
               UNSUPPORTED. This option specifies the read timeout in
               seconds  for reading messages from the utsessiond dae-
               mon.
    
         termAddrIsSecret=boolean
               UNSUPPORTED. If  this  option  is  true  then  the  IP
               address and port of appliances will not be reported in
               the dynamic status information provided on port cbport
               in response to the string.
    
         terminateEnable=boolean
               UNSUPPORTED. This  option  enables  some  experimental
               code in utauthd.
    
         timeout=seconds
               UNSUPPORTED. Appliances are required to send some sort
               of message to the authentication manager at least once
               every time period specified by seconds.
    
         tokenDir=directory
               UNSUPPORTED. This option specifies  a  directory  that
               contains the mappings from logical token names to ses-
               sion identifiers. The persistent storage of these map-
               pings  allows  the utauthd daemon to recover its state
               after restarting. Note that this  state  is  reset  on
               reboot of the system.
    
         token.equiv=filename
               UNSUPPORTED. This option specifies a  file  that  con-
               tains mappings from one raw token name to another.
    
         useLocalPolicy=boolean
               In a group environment this is set to false to provide
               a  global  group  policy  (which is extracted from the
               datastore).
    
               Default for a single system is true.
    
               When configured for a Group, the entry is false. If it
               is true, it indicates that only local policies will be
               used. The global Policy entry in LDAP database will be
               ignored.
    
               Checked by utpolicy -G.
    
         workers=maximum
               UNSUPPORTED. This option specifies the maximum  number
               of  spare  threads that are available for handling new
               connections from Sun Ray appliances.
    
    FILES
         The following files are used:
    
              /etc/init.d/utsvc
                    This is the system startup  script  that  invokes
                    the  daemon  /opt/SUNWut/utsessiond.  The session
                    manager performs  the  actual  session  switching
                    function.
    
              /etc/opt/SUNWut/auth.props
                    The authentication manager's configuration file.
    
    
    ATTRIBUTES
         See attributes(5) for descriptions of the  following  attri-
         butes:
    
    
    
         ____________________________________________________________
        |       ATTRIBUTE TYPE        |       ATTRIBUTE VALUE       |
        | Availability                | SUNWutr                     |
        |_____________________________|_____________________________|
    
    
    SEE ALSO
         utauthd(1M), utpolicy(1M), utsessiond(1M), utselect(1)
    
    
    
    


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру