The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

bash (1)
  • >> bash (1) ( Solaris man: Команды и прикладные программы пользовательского уровня )
  • bash (1) ( Русские man: Команды и прикладные программы пользовательского уровня )
  • bash (1) ( Linux man: Команды и прикладные программы пользовательского уровня )
  • bash (8) ( Русские man: Команды системного администрирования )
  • 
    NAME
         bash - GNU Bourne-Again SHell
    
    SYNOPSIS
         bash [options] [file]
    
    COPYRIGHT
         Bash is Copyright (C) 1989-1999 by the Free Software Founda-
         tion, Inc.
    
    DESCRIPTION
         Bash is an sh-compatible command language  interpreter  that
         executes  commands  read  from  the standard input or from a
         file.  Bash also incorporates useful features from the  Korn
         and C shells (ksh and csh).
    
         Bash is intended to be a conformant  implementation  of  the
         IEEE POSIX Shell and Tools specification (IEEE Working Group
         1003.2).
    
    OPTIONS
         In addition to the single-character shell options documented
         in  the  description of the set builtin command, bash inter-
         prets the following options when it is invoked:
    
         -c string If the -c option is  present,  then  commands  are
                   read  from  string.   If there are arguments after
                   the string, they are assigned  to  the  positional
                   parameters, starting with $0.
         -r        If the -r option is  present,  the  shell  becomes
                   restricted (see RESTRICTED SHELL below).
         -i        If the -i option is present, the shell is interac-
                   tive.
         -s        If the -s option is present, or  if  no  arguments
                   remain  after option processing, then commands are
                   read from the standard input.  This option  allows
                   the  positional parameters to be set when invoking
                   an interactive shell.
         -D        A list of all double-quoted strings preceded by  $
                   is  printed  on the standard ouput.  These are the
                   strings that are subject to  language  translation
                   when  the  current locale is not C or POSIX.  This
                   implies the -n option; no commands  will  be  exe-
                   cuted.
         --        A -- signals  the  end  of  options  and  disables
                   further  option  processing.   Any arguments after
                   the -- are treated as filenames and arguments.  An
                   argument of - is equivalent to --.
    
         Bash also interprets a number  of  multi-character  options.
         These  options  must  appear  on the command line before the
         single-character options in order for them to be recognized.
         --dump-po-strings
              Equivalent to -D, but the output is in the GNU  gettext
              po (portable object) file format.
         --dump-strings
              Equivalent to -D.
         --help
              Display a usage message on  standard  output  and  exit
              successfully.
         --login
              Make bash act as if it had  been  invoked  as  a  login
              shell (see INVOCATION below).
         --noediting
              Do not use the GNU readline  library  to  read  command
              lines if interactive.
         --noprofile
              Do  not  read  either  the  system-wide  startup   file
              /etc/profile  or  any  of  the  personal initialization
              files ~/.bash_profile,  ~/.bash_login,  or  ~/.profile.
              By  default,  bash reads these files when it is invoked
              as a login shell (see INVOCATION below).
         --norc
              Do not read and  execute  the  personal  initialization
              file  ~/.bashrc  if  the  shell  is  interactive.  This
              option is on by default if the shell is invoked as sh.
         --posix
              Change the behavior of bash where the default operation
              differs  from  the  POSIX  1003.2 standard to match the
              standard.
         --rcfile file
              Execute commands from file instead of the standard per-
              sonal  initialization  file  ~/.bashrc  if the shell is
              interactive (see INVOCATION below).
         --restricted
              The shell  becomes  restricted  (see  RESTRICTED  SHELL
              below).
         --verbose
              Equivalent to  -v.
         --version
              Show version information for this instance of  bash  on
              the standard output and exit successfully.
    
    ARGUMENTS
         If arguments remain after option processing, and neither the
         -c  nor  the -s option has been supplied, the first argument
         is assumed to be the name of a file  containing  shell  com-
         mands.  If bash is invoked in this fashion, $0 is set to the
         name of the file, and the positional parameters are  set  to
         the  remaining  arguments.  Bash reads and executes commands
         from this file, then exits.  Bash's exit status is the  exit
         status  of  the  last command executed in the script.  If no
         commands are executed, the exit status is 0.
    
    INVOCATION
         A login shell is one whose first character of argument  zero
         is a -, or one started with the --login option.
    
         An interactive shell is one whose standard input and  output
         are   both   connected   to   terminals  (as  determined  by
         isatty(3)), or one started with the -i option.  PS1  is  set
         and  $-  includes i if bash is interactive, allowing a shell
         script or a startup file to test this state.
    
         The following paragraphs  describe  how  bash  executes  its
         startup  files.   If  any  of  the files exist but cannot be
         read, bash reports an error.  Tildes are  expanded  in  file
         names as described below under Tilde Expansion in the EXPAN-
         SION section.
    
         When bash is invoked as an interactive login shell, or as  a
         non-interactive  shell  with  the  --login  option, it first
         reads and executes commands from the file  /etc/profile,  if
         that  file  exists.   After  reading that file, it looks for
         ~/.bash_profile,  ~/.bash_login,  and  ~/.profile,  in  that
         order,  and  reads  and executes commands from the first one
         that exists and is readable.  The --noprofile option may  be
         used when the shell is started to inhibit this behavior.
    
         When a login shell exits, bash reads and  executes  commands
         from the file ~/.bash_logout, if it exists.
    
         When an interactive shell that  is  not  a  login  shell  is
         started, bash reads and executes commands from ~/.bashrc, if
         that file exists.  This may be inhibited by using the --norc
         option.   The  --rcfile  file option will force bash to read
         and execute commands from file instead of ~/.bashrc.
    
         When bash is  started  non-interactively,  to  run  a  shell
         script,  for  example, it looks for the variable BASH_ENV in
         the environment, expands its value if it appears there,  and
         uses  the  expanded  value as the name of a file to read and
         execute.  Bash behaves as if the following command were exe-
         cuted:
              if [ -n "$BASH_ENV" ]; then . "$BASH_ENV"; fi
         but the value of the PATH variable is not used to search for
         the file name.
    
         If bash is invoked with the name sh, it tries to  mimic  the
         startup  behavior of historical versions of sh as closely as
         possible, while conforming to the POSIX  standard  as  well.
         When  invoked  as  an  interactive  login  shell,  or a non-
         interactive shell with the --login option, it first attempts
         to  read  and execute commands from /etc/profile and ~/.pro-
         file, in that order.  The --noprofile option may be used  to
         inhibit this behavior.  When invoked as an interactive shell
         with the name sh, bash looks for the variable  ENV,  expands
         its  value  if it is defined, and uses the expanded value as
         the name of a file to  read  and  execute.   Since  a  shell
         invoked  as sh does not attempt to read and execute commands
         from any other startup files, the  --rcfile  option  has  no
         effect.   A  non-interactive  shell invoked with the name sh
         does not attempt to  read  any  other  startup  files.  When
         invoked  as  sh,  bash  enters  posix mode after the startup
         files are read.
    
         When bash is started in posix mode, as with the --posix com-
         mand  line option, it follows the POSIX standard for startup
         files.  In this mode,  interactive  shells  expand  the  ENV
         variable  and  commands  are read and executed from the file
         whose name is the expanded value.  No  other  startup  files
         are read.
    
         Bash attempts to determine when  it  is  being  run  by  the
         remote shell daemon, usually rshd.  If bash determines it is
         being run by rshd,  it  reads  and  executes  commands  from
         ~/.bashrc, if that file exists and is readable.  It will not
         do this if invoked as sh.  The --norc option may be used  to
         inhibit  this  behavior, and the --rcfile option may be used
         to force another file to be read, but  rshd  does  not  gen-
         erally  invoke the shell with those options or allow them to
         be specified.
    
         If the shell is started with the effective user  (group)  id
         not  equal to the real user (group) id, and the -p option is
         not supplied, no startup files are read, shell functions are
         not  inherited from the environment, the SHELLOPTS variable,
         if it appears in the environment, is ignored, and the effec-
         tive  user  id is set to the real user id.  If the -p option
         is supplied at invocation, the startup behavior is the same,
         but the effective user id is not reset.
    
    DEFINITIONS
         The following definitions are used throughout  the  rest  of
         this document.
         blank
              A space or tab.
         word A sequence of characters considered as a single unit by
              the shell.  Also known as a token.
         name A word consisting only of alphanumeric  characters  and
              underscores, and beginning with an alphabetic character
              or an underscore.  Also referred to as an identifier.
         metacharacter
              A character that, when unquoted, separates words.   One
              of the following:
              |  & ; ( ) < > space tab
         control operator
              A token that performs a control function.  It is one of
              the following symbols:
              || & && ; ;; ( ) | <newline>
    
    RESERVED WORDS
         Reserved words are words that have a special meaning to  the
         shell.   The following words are recognized as reserved when
         unquoted and either the first word of a simple command  (see
         SHELL GRAMMAR below) or the third word of a case or for com-
         mand:
    
         ! case  do done elif else esac fi for function if in  select
         then until while { } time [[ ]]
    
    SHELL GRAMMAR
      Simple Commands
         A simple command is a sequence of optional variable  assign-
         ments  followed  by  blank-separated words and redirections,
         and terminated by a control operator.  The first word speci-
         fies  the  command  to be executed.  The remaining words are
         passed as arguments to the invoked command.
    
         The return value of a simple command is its exit status,  or
         128+n if the command is terminated by signal n.
    
      Pipelines
         A pipeline is a sequence of one or more  commands  separated
         by the character |.  The format for a pipeline is:
    
              [time [-p]] [ ! ] command [ | command2 ... ]
    
         The standard output of command is connected to the  standard
         input  of command2.  This connection is performed before any
         redirections  specified  by  the  command  (see  REDIRECTION
         below).
    
         If the reserved word ! precedes a pipeline, the exit  status
         of  that  pipeline  is the logical NOT of the exit status of
         the last command.  Otherwise, the status of the pipeline  is
         the  exit  status  of the last command.  The shell waits for
         all commands in the pipeline to terminate before returning a
         value.
    
         If the time reserved word precedes a pipeline,  the  elapsed
         as  well  as  user and system time consumed by its execution
         are reported when the pipeline terminates.   The  -p  option
         changes  the  output format to that specified by POSIX.  The
         TIMEFORMAT variable may be  set  to  a  format  string  that
         specifies  how  the  timing information should be displayed;
         see the description  of  TIMEFORMAT  under  Shell  Variables
         below.
    
    
         Each command in a pipeline is executed as a separate process
         (i.e., in a subshell).
    
      Lists
         A list is a sequence of one or more pipelines  separated  by
         one  of  the  operators ;, &, &&, or ||, and optionally ter-
         minated by one of ;, &, or <newline>.
    
         Of these list operators, && and ||  have  equal  precedence,
         followed by ; and &, which have equal precedence.
    
         If a command is terminated by the control  operator  &,  the
         shell  executes the command in the background in a subshell.
         The shell does not wait for the command to finish,  and  the
         return  status is 0.  Commands separated by a ; are executed
         sequentially; the shell waits for each command to  terminate
         in  turn.   The return status is the exit status of the last
         command executed.
    
         The control operators && and ||  denote  AND  lists  and  OR
         lists, respectively.  An AND list has the form
    
              command && command2
    
         command2 is executed if, and only  if,  command  returns  an
         exit status of zero.
    
         An OR list has the form
    
              command || command2
    
         command2 is executed if and only if command returns  a  non-
         zero  exit status.  The return status of AND and OR lists is
         the exit status of the last command executed in the list.
    
      Compound Commands
         A compound command is one of the following:
    
         (list)
              list is executed in a subshell.   Variable  assignments
              and  builtin  commands that affect the shell's environ-
              ment do not remain in effect  after  the  command  com-
              pletes.  The return status is the exit status of list.
    
         { list; }
              list is simply executed in the current  shell  environ-
              ment.   list must be terminated with a newline or semi-
              colon.  This is known as a group command.   The  return
              status is the exit status of list.
    
         ((expression))
              The expression is  evaluated  according  to  the  rules
              described  below  under  ARITHMETIC EVALUATION.  If the
              value of the expression is non-zero, the return  status
              is  0;  otherwise  the  return  status  is  1.  This is
              exactly equivalent to let "expression".
    
         [[ expression ]]
              Return a status of 0 or 1 depending on  the  evaluation
              of  the conditional expression expression.  Expressions
              are composed of the  primaries  described  below  under
              CONDITIONAL  EXPRESSIONS.   Word splitting and pathname
              expansion are not performed on the words between the [[
              and  ]]; tilde expansion, parameter and variable expan-
              sion, arithmetic expansion, command substitution,  pro-
              cess substitution, and quote removal are performed.
    
              When the == and != operators are used,  the  string  to
              the  right  of the operator is considered a pattern and
              matched according to the rules  described  below  under
              Pattern  Matching.  The return value is 0 if the string
              matches or does not match  the  pattern,  respectively,
              and 1 otherwise.  Any part of the pattern may be quoted
              to force it to be matched as a string.
    
              Expressions may be combined using the following  opera-
              tors, listed in decreasing order of precedence:
    
              ( expression )
                   Returns the value of expression.  This may be used
                   to override the normal precedence of operators.
              ! expression
                   True if expression is false.
              expression1 && expression2
                   True if both expression1 and expression2 are true.
              expression1 || expression2
                   True if either expression1 or expression2 is true.
    
         The && and || operators do not execute  expression2  if  the
         value  of  expression1 is sufficient to determine the return
         value of the entire conditional expression.
    
         for name [ in word ] ; do list ; done
              The list of words following in is expanded,  generating
              a list of items.  The variable name is set to each ele-
              ment of this list in turn, and list  is  executed  each
              time.   If the in word is omitted, the for command exe-
              cutes list once for each positional parameter  that  is
              set  (see  PARAMETERS below).  The return status is the
              exit status of the last command that executes.  If  the
              expansion of the items following in results in an empty
              list, no commands are executed, and the  return  status
              is 0.
    
         select name [ in word ] ; do list ; done
              The list of words following in is expanded,  generating
              a  list of items.  The set of expanded words is printed
              on the standard error, each preceded by a  number.   If
              the  in  word is omitted, the positional parameters are
              printed (see PARAMETERS below).  The PS3 prompt is then
              displayed  and a line read from the standard input.  If
              the line consists of a number corresponding to  one  of
              the  displayed  words, then the value of name is set to
              that word.  If the line is empty, the words and  prompt
              are  displayed again.  If EOF is read, the command com-
              pletes.  Any other value read causes name to be set  to
              null.   The  line  read is saved in the variable REPLY.
              The list is executed after each selection until a break
              or  return  command  is  executed.   The exit status of
              select is the exit status of the last command  executed
              in list, or zero if no commands were executed.
    
         case word in [ ( pattern [ | pattern ] ... ) list ;; ] ... esac
              A  case  command first expands word, and tries to match
              it against each pattern in turn, using the same  match-
              ing  rules  as  for  pathname  expansion  (see Pathname
              Expansion  below).   When  a  match   is   found,   the
              corresponding list is executed.  After the first match,
              no subsequent matches are attempted.  The  exit  status
              is  zero  if  no pattern matches.  Otherwise, it is the
              exit status of the last command executed in list.
    
    fi
         if list; then list; [ elif list; then list; ] ... [ else list;  ]
              The  if  list is executed.  If its exit status is zero,
              the then list is executed.  Otherwise, each  elif  list
              is  executed  in  turn, and if its exit status is zero,
              the corresponding then list is executed and the command
              completes.   Otherwise,  the  else list is executed, if
              present.  The exit status is the  exit  status  of  the
              last  command  executed, or zero if no condition tested
              true.
    
         while list; do list; done
         until list; do list; done
              The while command continuously executes the do list  as
              long as the last command in list returns an exit status
              of zero.  The until command is identical to  the  while
              command,  except  that the test is negated; the do list
              is executed as long as the last command in list returns
              a  non-zero  exit status.  The exit status of the while
              and until commands is the exit status of  the  last  do
              list command executed, or zero if none was executed.
    
         [ function ] name () { list; }
              This defines a function named name.  The  body  of  the
              function is the list of commands between { and }.  This
              list is executed whenever name is specified as the name
              of  a simple command.  The exit status of a function is
              the exit status of the last  command  executed  in  the
              body.  (See FUNCTIONS below.)
    
    COMMENTS
         In a non-interactive shell, or an interactive shell in which
         the  interactive_comments  option  to  the  shopt builtin is
         enabled (see SHELL BUILTIN COMMANDS below), a word beginning
         with # causes that word and all remaining characters on that
         line to  be  ignored.   An  interactive  shell  without  the
         interactive_comments option enabled does not allow comments.
         The interactive_comments option is on by default in interac-
         tive shells.
    
    QUOTING
         Quoting is used to remove the  special  meaning  of  certain
         characters  or  words  to the shell.  Quoting can be used to
         disable special treatment for special characters, to prevent
         reserved words from being recognized as such, and to prevent
         parameter expansion.
    
         Each of the metacharacters listed  above  under  DEFINITIONS
         has  special meaning to the shell and must be quoted if they
         are  to  represent  themselves.   There  are  three  quoting
         mechanisms:  the escape character, single quotes, and double
         quotes.
    
         A non-quoted backslash (\)  is  the  escape  character.   It
         preserves  the literal value of the next character that fol-
         lows, with the exception of <newline>.  If a \<newline> pair
         appears,  and the backslash is not itself quoted, the \<new-
         line> is treated as a line  continuation  (that  is,  it  is
         removed from the input stream and effectively ignored).
    
         Enclosing characters in single quotes preserves the  literal
         value  of  each character within the quotes.  A single quote
         may not occur between single quotes, even when preceded by a
         backslash.
    
         Enclosing characters in double quotes preserves the  literal
         value  of  all characters within the quotes, with the excep-
         tion of $, `, and \.  The characters $ and  `  retain  their
         special meaning within double quotes.  The backslash retains
         its special meaning only when followed by one of the follow-
         ing  characters:   $, `, ", \, or <newline>.  A double quote
         may be quoted within double quotes by preceding  it  with  a
         backslash.
    
         The special parameters * and @ have special meaning when  in
         double quotes (see PARAMETERS below).
         Words of the form $'string' are treated specially.  The word
         expands   to   string,   with  backslash-escaped  characters
         replaced as specifed by  the  ANSI  C  standard.   Backslash
         escape sequences, if present, are decoded as follows:
              \a   alert (bell)
              \b   backspace
              \e   an escape character
              \f   form feed
              \n   new line
              \r   carriage return
              \t   horizontal tab
              \v   vertical tab
              \\   backslash
              \nnn the character whose ASCII code is the octal  value
                   nnn (one to three digits)
              \xnnn
                   the character whose ASCII code is the  hexadecimal
                   value nnn (one to three digits)
    
         The translated result is single-quoted,  as  if  the  dollar
         sign had not been present.
    
         A double-quoted string preceded by a dollar  sign  ($)  will
         cause  the  string to be translated according to the current
         locale.  If the current locale is C  or  POSIX,  the  dollar
         sign  is ignored.  If the string is translated and replaced,
         the replacement is double-quoted.
    
    PARAMETERS
         A parameter is an entity that stores values.  It  can  be  a
         name,  a  number,  or  one  of the special characters listed
         below under Special Parameters.  For the shell's purposes, a
         variable is a parameter denoted by a name.
    
         A parameter is set if it has been  assigned  a  value.   The
         null  string  is  a valid value.  Once a variable is set, it
         may be unset only by using the unset  builtin  command  (see
         SHELL BUILTIN COMMANDS below).
    
         A variable may be assigned to by a statement of the form
    
              name=[value]
    
         If value is not given, the variable  is  assigned  the  null
         string.   All  values undergo tilde expansion, parameter and
         variable expansion, string expansion, command  substitution,
         arithmetic  expansion,  and  quote  removal  (see  EXPANSION
         below).  If the variable has its integer attribute set  (see
         declare  below in SHELL BUILTIN COMMANDS) then value is sub-
         ject to arithmetic expansion even if the $((...))  expansion
         is  not  used (see Arithmetic Expansion below).  Word split-
         ting is  not  performed,  with  the  exception  of  "$@"  as
         explained  below  under Special Parameters.  Pathname expan-
         sion is not performed.
    
      Positional Parameters
         A positional parameter is a parameter denoted by one or more
         digits,  other  than the single digit 0.  Positional parame-
         ters are assigned from the  shell's  arguments  when  it  is
         invoked,  and  may  be reassigned using the set builtin com-
         mand.  Positional parameters may not  be  assigned  to  with
         assignment  statements.   The positional parameters are tem-
         porarily replaced when a shell  function  is  executed  (see
         FUNCTIONS below).
    
         When a positional parameter consisting of more than a single
         digit is expanded, it must be enclosed in braces (see EXPAN-
         SION below).
    
      Special Parameters
         The shell treats several parameters specially.  These param-
         eters  may  only  be  referenced;  assignment to them is not
         allowed.
         *    Expands to the  positional  parameters,  starting  from
              one.   When  the expansion occurs within double quotes,
              it expands to a single word  with  the  value  of  each
              parameter  separated  by the first character of the IFS
              special variable.   That  is,  "$*"  is  equivalent  to
              "$1c$2c...",  where  c  is  the  first character of the
              value of the IFS variable.  If IFS is unset, the param-
              eters  are  separated  by  spaces.  If IFS is null, the
              parameters are joined without intervening separators.
         @    Expands to the  positional  parameters,  starting  from
              one.   When  the expansion occurs within double quotes,
              each parameter expands to a separate  word.   That  is,
              "$@"  is equivalent to "$1" "$2" ...  When there are no
              positional parameters, "$@" and $@  expand  to  nothing
              (i.e., they are removed).
         #    Expands to  the  number  of  positional  parameters  in
              decimal.
         ?    Expands to the status of  the  most  recently  executed
              foreground pipeline.
         -    Expands to the current option flags as  specified  upon
              invocation, by the set builtin command, or those set by
              the shell itself (such as the -i option).
         $    Expands to the process ID of the shell.  In a  ()  sub-
              shell,  it  expands  to  the  process ID of the current
              shell, not the subshell.
         !    Expands to the process ID of the most recently executed
              background (asynchronous) command.
         0    Expands to the name of the shell or shell script.  This
              is  set  at  shell  initialization.  If bash is invoked
              with a file of commands, $0 is set to the name of  that
              file.   If  bash is started with the -c option, then $0
              is set to the first argument after  the  string  to  be
              executed,  if  one is present.  Otherwise, it is set to
              the file name used to invoke bash, as given by argument
              zero.
         _    At shell startup, set to the absolute file name of  the
              shell  or  shell script being executed as passed in the
              argument list.  Subsequently, expands to the last argu-
              ment  to  the  previous command, after expansion.  Also
              set to the full file name of each command executed  and
              placed  in  the  environment  exported to that command.
              When checking mail, this parameter holds  the  name  of
              the mail file currently being checked.
    
      Shell Variables
         The following variables are set by the shell:
    
         PPID The process ID of the shell's parent.  This variable is
              readonly.
         PWD  The current working directory as set by the cd command.
         OLDPWD
              The previous working directory as set by  the  cd  com-
              mand.
         REPLY
              Set to the line of input read by the read builtin  com-
              mand when no arguments are supplied.
         UID  Expands to the user ID of the current user, initialized
              at shell startup.  This variable is readonly.
         EUID Expands to the effective user ID of the  current  user,
              initialized   at   shell  startup.   This  variable  is
              readonly.
         GROUPS
              An array variable containing  the  list  of  groups  of
              which  the  current user is a member.  This variable is
              readonly.
         BASH Expands to the full  file  name  used  to  invoke  this
              instance of bash.
         BASH_VERSION
              Expands to a string  describing  the  version  of  this
              instance of bash.
         BASH_VERSINFO
              A readonly array variable whose  members  hold  version
              information  for  this  instance  of  bash.  The values
              assigned to the array members are as follows:
              BASH_VERSINFO[0]        The major version  number  (the
                                      release).
              BASH_VERSINFO[1]        The minor version  number  (the
                                      version).
              BASH_VERSINFO[2]        The patch level.
              BASH_VERSINFO[3]        The build version.
              BASH_VERSINFO[4]        The   release   status   (e.g.,
                                      beta1).
              BASH_VERSINFO[5]        The value of MACHTYPE.
    
         SHLVL
              Incremented by one each time an  instance  of  bash  is
              started.
    
         RANDOM
              Each  time  this  parameter  is  referenced,  a  random
              integer between 0 and 32767 is generated.  The sequence
              of random numbers may be  initialized  by  assigning  a
              value to RANDOM.  If RANDOM is unset, it loses its spe-
              cial properties, even if it is subsequently reset.
    
         SECONDS
              Each time this parameter is referenced, the  number  of
              seconds since shell invocation is returned.  If a value
              is assigned to SECONDS, the value returned upon  subse-
              quent  references  is  the  number of seconds since the
              assignment plus the  value  assigned.   If  SECONDS  is
              unset,  it  loses its special properties, even if it is
              subsequently reset.
    
         LINENO
              Each time this parameter is referenced, the shell  sub-
              stitutes  a  decimal  number  representing  the current
              sequential line  number  (starting  with  1)  within  a
              script  or function.  When not in a script or function,
              the value substituted is not guaranteed to be  meaning-
              ful.   If LINENO is unset, it loses its special proper-
              ties, even if it is subsequently reset.
    
         HISTCMD
              The history number, or index in the  history  list,  of
              the current command.  If HISTCMD is unset, it loses its
              special properties, even if it is subsequently reset.
    
         DIRSTACK
              An array variable (see  Arrays  below)  containing  the
              current  contents  of the directory stack.  Directories
              appear in the stack in the order they are displayed  by
              the  dirs  builtin.  Assigning to members of this array
              variable may be used to modify directories  already  in
              the stack, but the pushd and popd builtins must be used
              to add and  remove  directories.   Assignment  to  this
              variable  will  not  change  the current directory.  If
              DIRSTACK is unset, it  loses  its  special  properties,
              even if it is subsequently reset.
    
         PIPESTATUS
              An array variable (see Arrays below) containing a  list
              of  exit  status values from the processes in the most-
              recently-executed foreground pipeline (which  may  con-
              tain only a single command).
    
         OPTARG
              The value of the last option argument processed by  the
              getopts  builtin  command  (see  SHELL BUILTIN COMMANDS
              below).
    
         OPTIND
              The index of the next argument to be processed  by  the
              getopts  builtin  command  (see  SHELL BUILTIN COMMANDS
              below).
    
         HOSTNAME
              Automatically set to the name of the current host.
    
         HOSTTYPE
              Automatically set to a string that  uniquely  describes
              the  type  of  machine on which bash is executing.  The
              default is system-dependent.
    
         OSTYPE
              Automatically  set  to  a  string  that  describes  the
              operating  system  on  which  bash  is  executing.  The
              default is system-dependent.
    
         MACHTYPE
              Automatically set to a string that fully describes  the
              system type on which bash is executing, in the standard
              GNU cpu-company-system format.  The default is  system-
              dependent.
    
         SHELLOPTS
              A colon-separated list of enabled shell options.   Each
              word  in the list is a valid argument for the -o option
              to the set builtin command (see SHELL BUILTIN  COMMANDS
              below).   The  options appearing in SHELLOPTS are those
              reported as on by set -o.  If this variable is  in  the
              environment  when  bash starts up, each shell option in
              the list will be enabled  before  reading  any  startup
              files.  This variable is read-only.
    
         The following variables are used  by  the  shell.   In  some
         cases,  bash  assigns  a  default value to a variable; these
         cases are noted below.
    
         IFS  The Internal Field Separator  that  is  used  for  word
              splitting after expansion and to split lines into words
              with the read builtin command.  The  default  value  is
              ``<space><tab><newline>''.
         PATH The search path for commands.  It is a  colon-separated
              list  of  directories in which the shell looks for com-
              mands (see COMMAND EXECUTION below).  The default  path
              is  system-dependent,  and  is set by the administrator
              who    installs    bash.     A    common    value    is
              ``/usr/gnu/bin:/usr/local/bin:/usr/ucb:/bin:/usr/bin:.''.
         HOME The home directory of the  current  user;  the  default
              argument for the cd builtin command.  The value of this
              variable is also used when performing tilde expansion.
         CDPATH
              The search path for the cd command.  This is  a  colon-
              separated  list of directories in which the shell looks
              for destination directories specified by  the  cd  com-
              mand.  A sample value is ``.:~:/usr''.
         BASH_ENV
              If this parameter is set when bash is executing a shell
              script, its value is interpreted as a filename contain-
              ing commands to initialize the shell, as in  ~/.bashrc.
              The  value of BASH_ENV is subjected to parameter expan-
              sion, command substitution,  and  arithmetic  expansion
              before  being  interpreted as a file name.  PATH is not
              used to search for the resultant file name.
         MAIL If this parameter is set to a file name and  the  MAIL-
              PATH  variable is not set, bash informs the user of the
              arrival of mail in the specified file.
         MAILCHECK
              Specifies how often (in seconds) bash checks for  mail.
              The  default  is  60 seconds.  When it is time to check
              for mail, the shell does so before displaying the  pri-
              mary prompt.  If this variable is unset, the shell dis-
              ables mail checking.
         MAILPATH
              A colon-separated list of file names to be checked  for
              mail.  The message to be printed when mail arrives in a
              particular file may be specified by separating the file
              name  from  the  message  with a `?'.  When used in the
              text of the message, $_ expands  to  the  name  of  the
              current mailfile. Example:
              MAILPATH='/usr/spool/mail/bfox?"You                have
              mail":~/shell-mail?"$_ has mail!"'
              Bash supplies a default value for  this  variable,  but
              the  location  of  the  user mail files that it uses is
              system dependent (e.g., /usr/spool/mail/$USER).
         PS1  The value of this parameter is expanded (see  PROMPTING
              below)  and  used  as  the  primary prompt string.  The
              default value is ``\s-\v\$ ''.
         PS2  The value of this parameter is expanded as with PS1 and
              used  as  the  secondary prompt string.  The default is
              ``> ''.
         PS3  The value of this parameter is used as the  prompt  for
              the select command (see SHELL GRAMMAR above).
         PS4  The value of this parameter is expanded as with PS1 and
              the  value is printed before each command bash displays
              during an execution trace.  The first character of  PS4
              is replicated multiple times, as necessary, to indicate
              multiple levels of indirection.  The default is ``+ ''.
         TIMEFORMAT
              The value of this parameter is used as a format  string
              specifying  how  the  timing  information for pipelines
              prefixed  with  the  time  reserved  word   should   be
              displayed.    The  %  character  introduces  an  escape
              sequence that is expanded to  a  time  value  or  other
              information.   The  escape sequences and their meanings
              are as follows; the braces denote optional portions.
              %%        A literal %.
              %[p][l]R  The elapsed time in seconds.
              %[p][l]U  The number of CPU seconds spent in user mode.
              %[p][l]S  The number of CPU  seconds  spent  in  system
                        mode.
              %P        The CPU percentage, computed as (%U +  %S)  /
                        %R.
    
              The optional p is a digit specifying the precision, the
              number  of  fractional digits after a decimal point.  A
              value of 0 causes no decimal point or  fraction  to  be
              output.   At  most three places after the decimal point
              may be specified;  values  of  p  greater  than  3  are
              changed  to  3.   If p is not specified, the value 3 is
              used.
    
              The optional l specifies  a  longer  format,  including
              minutes,  of the form MMmSS.FFs.  The value of p deter-
              mines whether or not the fraction is included.
    
              If this variable is not set, bash acts as if it had the
              value   $'\nreal\t%3lR\nuser\t%3lU\nsys%3lS'.   If  the
              value is null, no timing information is  displayed.   A
              trailing  newline  is  added  when the format string is
              displayed.
    
         HISTSIZE
              The number of commands to remember in the command  his-
              tory (see HISTORY below).  The default value is 500.
    
         HISTFILE
              The name of the file in which command history is  saved
              (see    HISTORY   below).    The   default   value   is
              ~/.bash_history.  If unset, the command history is  not
              saved when an interactive shell exits.
    
         HISTFILESIZE
              The maximum number of lines contained  in  the  history
              file.  When this variable is assigned a value, the his-
              tory file is truncated, if  necessary,  to  contain  no
              more  than  that number of lines.  The default value is
              500.  The history file is also truncated to  this  size
              after writing it when an interactive shell exits.
    
         OPTERR
              If set to the value 1,  bash  displays  error  messages
              generated  by  the  getopts  builtin command (see SHELL
              BUILTIN COMMANDS below).  OPTERR is  initialized  to  1
              each  time  the  shell  is invoked or a shell script is
              executed.
    
         LANG Used to determine the locale category for any  category
              not specifically selected with a variable starting with
              LC_.
    
         LC_ALL
              This variable overrides the value of LANG and any other
              LC_ variable specifying a locale category.
    
         LC_COLLATE
              This variable determines the collation order used  when
              sorting  the  results of pathname expansion, and deter-
              mines the behavior of  range  expressions,  equivalence
              classes, and collating sequences within pathname expan-
              sion and pattern matching.
    
         LC_CTYPE
              This variable determines the interpretation of  charac-
              ters and the behavior of character classes within path-
              name expansion and pattern matching.
    
         LC_MESSAGES
              This variable determines the locale used  to  translate
              double-quoted strings preceded by a $.
    
         PROMPT_COMMAND
              If set, the value is executed as  a  command  prior  to
              issuing each primary prompt.
    
         IGNOREEOF
              Controls the action of an interactive shell on  receipt
              of  an  EOF  character  as the sole input.  If set, the
              value is the number of consecutive EOF characters which
              must  be typed as the first characters on an input line
              before bash exits.  If the variable exists but does not
              have  a  numeric  value,  or  has no value, the default
              value is 10.  If it does not exist, EOF  signifies  the
              end of input to the shell.
    
         TMOUT
              If set to a value  greater  than  zero,  the  value  is
              interpreted  as the number of seconds to wait for input
              after issuing  the  primary  prompt.   Bash  terminates
              after  waiting for that number of seconds if input does
              not arrive.
    
         FCEDIT
              The default editor for the fc builtin command.
    
         FIGNORE
              A colon-separated list of suffixes to ignore when  per-
              forming  filename  completion  (see READLINE below).  A
              filename whose suffix matches one  of  the  entries  in
              FIGNORE is excluded from the list of matched filenames.
              A sample value is ``.o:~''.
    
         GLOBIGNORE
              A colon-separated list of patterns defining the set  of
              filenames  to  be  ignored by pathname expansion.  If a
              filename matched by a pathname expansion  pattern  also
              matches  one  of  the  patterns  in  GLOBIGNORE,  it is
              removed from the list of matches.
    
         INPUTRC
              The filename for the readline startup file,  overriding
              the default of ~/.inputrc (see READLINE below).
    
         HISTCONTROL
              If set to a value of  ignorespace,  lines  which  begin
              with  a  space character are not entered on the history
              list.  If set to a value of ignoredups, lines  matching
              the  last  history  line  are  not entered.  A value of
              ignoreboth combines the two options.  If unset,  or  if
              set to any other value than those above, all lines read
              by the parser are saved on the history list, subject to
              the  value  of HISTIGNORE.  This variable's function is
              superseded by HISTIGNORE.  The  second  and  subsequent
              lines  of a multi-line compound command are not tested,
              and are added to the history regardless of the value of
              HISTCONTROL.
    
         HISTIGNORE
              A colon-separated list of patterns used to decide which
              command  lines  should  be  saved  on the history list.
              Each pattern is anchored at the beginning of  the  line
              and  must  fully  specify  the line (no implicit `*' is
              appended).  Each pattern is  tested  against  the  line
              after  the checks specified by HISTCONTROL are applied.
              In addition to the normal shell pattern matching  char-
              acters, `&' matches the previous history line.  `&' may
              be escaped using a backslash.  The backslash is removed
              before  attempting  a match.  The second and subsequent
              lines of a multi-line compound command are not  tested,
              and are added to the history regardless of the value of
              HISTIGNORE.
    
         histchars
              The two  or  three  characters  which  control  history
              expansion   and  tokenization  (see  HISTORY  EXPANSION
              below).  The first character is the  history  expansion
              character,  the  character which signals the start of a
              history expansion, normally `!'.  The second  character
              is  the  quick substitution character, which is used as
              shorthand for re-running the previous command  entered,
              substituting  one  string  for  another in the command.
              The default is `^'.  The optional  third  character  is
              the character which indicates that the remainder of the
              line is a comment when found as the first character  of
              a  word,  normally  `#'.  The history comment character
              causes history  substitution  to  be  skipped  for  the
              remaining  words  on the line.  It does not necessarily
              cause the shell parser to treat the rest of the line as
              a comment.
    
         HOSTFILE
              Contains the name of a  file  in  the  same  format  as
              /etc/hosts  that should be read when the shell needs to
              complete a hostname.  The file may be changed  interac-
              tively;  the next time hostname completion is attempted
              bash adds the contents of the new file to  the  already
              existing database.
    
         auto_resume
              This variable controls how the shell interacts with the
              user  and job control.  If this variable is set, single
              word simple commands without redirections  are  treated
              as  candidates  for  resumption  of an existing stopped
              job.  There is no ambiguity allowed; if there  is  more
              than  one  job beginning with the string typed, the job
              most recently accessed is  selected.   The  name  of  a
              stopped  job, in this context, is the command line used
              to start it.  If set to the  value  exact,  the  string
              supplied  must match the name of a stopped job exactly;
              if set to substring, the string supplied needs to match
              a  substring  of  the  name of a stopped job.  The sub-
              string value provides functionality analogous to the %?
              job  identifier (see JOB CONTROL below).  If set to any
              other value, the supplied string must be a prefix of  a
              stopped  job's name; this provides functionality analo-
              gous to the % job identifier.
    
      Arrays
         Bash provides one-dimensional array variables.  Any variable
         may be used as an array; the declare builtin will explicitly
         declare an array.  There is no maximum limit on the size  of
         an  array,  nor  any  requirement that members be indexed or
         assigned contiguously.  Arrays are  indexed  using  integers
         and are zero-based.
    
         An  array  is  created  automatically  if  any  variable  is
         assigned  to  using  the  syntax name[subscript]=value.  The
         subscript is treated as an arithmetic expression  that  must
         evaluate  to  a  number  greater  than or equal to zero.  To
         explicitly declare an array, use declare -a name (see  SHELL
         BUILTIN COMMANDS below).  declare -a name[subscript] is also
         accepted; the  subscript  is  ignored.   Attributes  may  be
         specified  for  an  array  variable  using  the  declare and
         readonly builtins.  Each attribute applies to all members of
         an array.
    
         Arrays are assigned to using  compound  assignments  of  the
         form  name=(value1  ...  valuen), where each value is of the
         form [subscript]=string.  Only string is required.   If  the
         optional  brackets and subscript are supplied, that index is
         assigned to; otherwise the index of the element assigned  is
         the  last  index  assigned  to  by  the  statement plus one.
         Indexing starts at zero.  This syntax is  also  accepted  by
         the  declare  builtin.   Individual  array  elements  may be
         assigned to using the  name[subscript]=value  syntax  intro-
         duced above.
    
         Any  element  of  an   array   may   be   referenced   using
         ${name[subscript]}.   The  braces are required to avoid con-
         flicts with pathname expansion.  If subscript is @ or *, the
         word  expands  to  all  members  of  name.  These subscripts
         differ only when the word appears within double quotes.   If
         the  word  is  double-quoted, ${name[*]} expands to a single
         word with the value of each array member  separated  by  the
         first  character of the IFS special variable, and ${name[@]}
         expands each element of name to a separate word.  When there
         are  no  array members, ${name[@]} expands to nothing.  This
         is analogous to the expansion of the  special  parameters  *
         and  @  (see Special Parameters above).  ${#name[subscript]}
         expands to the length of ${name[subscript]}.   If  subscript
         is  *  or  @, the expansion is the number of elements in the
         array.  Referencing an array variable without a subscript is
         equivalent to referencing element zero.
    
         The  unset  builtin  is  used  to  destroy  arrays.    unset
         name[subscript]  destroys  the  array  element at index sub-
         script.  unset name,  where  name  is  an  array,  or  unset
         name[subscript],  where  subscript  is  *  or @, removes the
         entire array.
    
         The declare, local, and readonly builtins each accept  a  -a
         option  to  specify an array.  The read builtin accepts a -a
         option to assign a list of  words  read  from  the  standard
         input  to  an  array.   The set and declare builtins display
         array values in a way that  allows  them  to  be  reused  as
         assignments.
    
    EXPANSION
         Expansion is performed on the command line after it has been
         split  into  words.  There are seven kinds of expansion per-
         formed:  brace expansion,  tilde  expansion,  parameter  and
         variable  expansion, command substitution, arithmetic expan-
         sion, word splitting, and pathname expansion.
    
         The order of expansions is: brace  expansion,  tilde  expan-
         sion,  parameter, variable and arithmetic expansion and com-
         mand substitution (done in a  left-to-right  fashion),  word
         splitting, and pathname expansion.
    
         On systems that can  support  it,  there  is  an  additional
         expansion available: process substitution.
    
         Only brace expansion, word splitting, and pathname expansion
         can  change  the  number  of  words  of the expansion; other
         expansions expand a single word to a single word.  The  only
         exceptions   to   this   are  the  expansions  of  "$@"  and
         "${name[@]}" as explained above (see PARAMETERS).
    
      Brace Expansion
         Brace expansion is a mechanism by  which  arbitrary  strings
         may  be  generated.   This  mechanism is similar to pathname
         expansion, but the filenames generated need not exist.  Pat-
         terns  to  be  brace  expanded  take the form of an optional
         preamble, followed by a series  of  comma-separated  strings
         between   a   pair   of  braces,  followed  by  an  optional
         postscript.  The preamble is prefixed to  each  string  con-
         tained  within  the  braces,  and  the  postscript  is  then
         appended to each resulting string, expanding left to right.
    
         Brace  expansions  may  be  nested.   The  results  of  each
         expanded  string  are  not  sorted;  left  to right order is
         preserved.  For example, a{d,c,b}e  expands  into  `ade  ace
         abe'.
    
         Brace expansion is performed before  any  other  expansions,
         and any characters special to other expansions are preserved
         in the result.  It is strictly textual.  Bash does not apply
         any syntactic interpretation to the context of the expansion
         or the text between the braces.
    
         A correctly-formed brace  expansion  must  contain  unquoted
         opening and closing braces, and at least one unquoted comma.
         Any incorrectly formed brace expansion is left unchanged.  A
         {  or  , may be quoted with a backslash to prevent its being
         considered part of a brace expression.
    
         This construct is typically used as shorthand when the  com-
         mon  prefix of the strings to be generated is longer than in
         the above example:
    
    
              mkdir /usr/local/src/bash/{old,new,dist,bugs}
         or
              chown root /usr/{ucb/{ex,edit},lib/{ex?.?*,how_ex}}
    
         Brace expansion introduces  a  slight  incompatibility  with
         historical  versions  of  sh.   sh does not treat opening or
         closing braces specially when they appear as part of a word,
         and  preserves them in the output.  Bash removes braces from
         words as a consequence of brace expansion.  For  example,  a
         word  entered  to sh as file{1,2} appears identically in the
         output.  The same word is output as file1 file2 after expan-
         sion  by  bash.  If strict compatibility with sh is desired,
         start bash with the +B option  or  disable  brace  expansion
         with  the  +B  option  to the set command (see SHELL BUILTIN
         COMMANDS below).
    
      Tilde Expansion
         If a word begins with an unquoted tilde character (`~'), all
         of the characters preceding the first unquoted slash (or all
         characters, if there is no unquoted slash) are considered  a
         tilde-prefix.  If none of the characters in the tilde-prefix
         are quoted, the characters in the tilde-prefix following the
         tilde  are  treated as a possible login name.  If this login
         name is the null string, the  tilde  is  replaced  with  the
         value  of  the  shell parameter HOME.  If HOME is unset, the
         home directory of the user executing the  shell  is  substi-
         tuted instead.  Otherwise, the tilde-prefix is replaced with
         the home directory associated with the specified login name.
    
         If the tilde-prefix is a `~+', the value of the shell  vari-
         able  PWD replaces the tilde-prefix.  If the tilde-prefix is
         a `~-', the value of the shell variable  OLDPWD,  if  it  is
         set,  is substituted.  If the characters following the tilde
         in the tilde-prefix consist of a number N,  optionally  pre-
         fixed  by  a `+' or a `-', the tilde-prefix is replaced with
         the corresponding element from the directory  stack,  as  it
         would  be  displayed  by  the  dirs builtin invoked with the
         tilde-prefix as an argument.  If  the  characters  following
         the  tilde in the tilde-prefix consist of a number without a
         leading `+' or `-', `+' is assumed.
    
         If the login name is invalid, or the tilde expansion  fails,
         the word is unchanged.
    
         Each variable assignment  is  checked  for  unquoted  tilde-
         prefixes  immediately  following  a : or =.  In these cases,
         tilde expansion is also performed.   Consequently,  one  may
         use file names with tildes in assignments to PATH, MAILPATH,
         and CDPATH, and the shell assigns the expanded value.
    
      Parameter Expansion
    
         The `$' character introduces  parameter  expansion,  command
         substitution,  or  arithmetic expansion.  The parameter name
         or symbol to be expanded may be enclosed  in  braces,  which
         are  optional  but  serve  to  protect  the  variable  to be
         expanded from  characters  immediately  following  it  which
         could be interpreted as part of the name.
    
         When braces are used, the matching ending brace is the first
         `}'  not  escaped  by a backslash or within a quoted string,
         and not within an  embedded  arithmetic  expansion,  command
         substitution, or paramter expansion.
    
         ${parameter}
              The value of parameter is substituted.  The braces  are
              required  when parameter is a positional parameter with
              more than one digit, or when parameter is followed by a
              character which is not to be interpreted as part of its
              name.
    
         If the first character of parameter is an exclamation point,
         a  level  of  variable indirection is introduced.  Bash uses
         the value of the variable formed from the rest of  parameter
         as  the name of the variable; this variable is then expanded
         and that value used in the rest of the substitution,  rather
         than  the  value  of  parameter  itself.   This  is known as
         indirect expansion.
    
         In each of the cases below, word is subject to tilde  expan-
         sion,  parameter expansion, command substitution, and arith-
         metic expansion.  When not performing  substring  expansion,
         bash  tests  for a parameter that is unset or null; omitting
         the colon results in a test only for  a  parameter  that  is
         unset.
    
         ${parameter:-word}
              Use Default Values.  If parameter is unset or null, the
              expansion of word is substituted.  Otherwise, the value
              of parameter is substituted.
         ${parameter:=word}
              Assign Default Values.  If parameter is unset or  null,
              the  expansion  of  word is assigned to parameter.  The
              value of parameter  is  then  substituted.   Positional
              parameters  and  special parameters may not be assigned
              to in this way.
         ${parameter:?word}
              Display Error if Null or Unset.  If parameter  is  null
              or  unset,  the expansion of word (or a message to that
              effect if word is not present) is written to the  stan-
              dard  error  and  the  shell, if it is not interactive,
              exits.  Otherwise, the value of  parameter  is  substi-
              tuted.
         ${parameter:+word}
              Use Alternate Value.  If parameter is  null  or  unset,
              nothing is substituted, otherwise the expansion of word
              is substituted.
         ${parameter:offset}
         ${parameter:offset:length}
              Substring Expansion.  Expands to up to  length  charac-
              ters of parameter, starting at the characters specified
              by offset.  If length is omitted, expands to  the  sub-
              string  of  parameter, starting at the character speci-
              fied by  offset.   length  and  offset  are  arithmetic
              expressions  (see ARITHMETIC EVALUATION below).  length
              must evaluate to a number  greater  than  or  equal  to
              zero.   If offset evaluates to a number less than zero,
              the value is used as an offset  from  the  end  of  the
              value  of  parameter.  If parameter is @, the result is
              length positional parameters beginning at  offset.   If
              parameter  is  an  array  name  indexed  by @ or *, the
              result is the length members  of  the  array  beginning
              with   ${parameter[offset]}.    Substring  indexing  is
              zero-based unless the positional parameters  are  used,
              in which case the indexing starts at 1.
    
         ${#parameter}
              The length in characters of the value of  parameter  is
              substituted.  If parameter is * or @, the value substi-
              tuted is  the  number  of  positional  parameters.   If
              parameter  is  an array name subscripted by * or @, the
              value substituted is the  number  of  elements  in  the
              array.
    
         ${parameter#word}
         ${parameter##word}
              The word is expanded to produce a pattern  just  as  in
              pathname  expansion.  If the pattern matches the begin-
              ning of the value of parameter, then the result of  the
              expansion  is  the expanded value of parameter with the
              shortest matching pattern (the ``#'' case) or the long-
              est  matching  pattern  (the  ``##'' case) deleted.  If
              parameter is @ or *, the pattern removal  operation  is
              applied  to  each positional parameter in turn, and the
              expansion is the resultant list.  If  parameter  is  an
              array  variable  subscripted  with  @ or *, the pattern
              removal operation is applied  to  each  member  of  the
              array in turn, and the expansion is the resultant list.
    
         ${parameter%word}
         ${parameter%%word}
              The word is expanded to produce a pattern  just  as  in
              pathname  expansion.  If the pattern matches a trailing
              portion of the expanded value of  parameter,  then  the
              result of the expansion is the expanded value of param-
              eter with the  shortest  matching  pattern  (the  ``%''
              case) or the longest matching pattern (the ``%%'' case)
              deleted.  If parameter is @ or *, the  pattern  removal
              operation  is  applied  to each positional parameter in
              turn, and the expansion  is  the  resultant  list.   If
              parameter is an array variable subscripted with @ or *,
              the pattern removal operation is applied to each member
              of  the  array in turn, and the expansion is the resul-
              tant list.
    
         ${parameter/pattern/string}
         ${parameter//pattern/string}
              The pattern is expanded to produce a pattern just as in
              pathname  expansion.   Parameter  is  expanded  and the
              longest match of pattern against its value is  replaced
              with  string.   In the first form, only the first match
              is replaced.  The second form  causes  all  matches  of
              pattern  to be replaced with string.  If pattern begins
              with #, it must match at the beginning of the  expanded
              value  of parameter.  If pattern begins with %, it must
              match at the end of the expanded  value  of  parameter.
              If  string  is null, matches of pattern are deleted and
              the / following pattern may be omitted.   If  parameter
              is  @  or  *,  the substitution operation is applied to
              each positional parameter in turn, and the expansion is
              the  resultant list.  If parameter is an array variable
              subscripted with @ or *, the substitution operation  is
              applied  to  each  member of the array in turn, and the
              expansion is the resultant list.
    
      Command Substitution
         Command substitution allows  the  output  of  a  command  to
         replace the command name.  There are two forms:
    
              $(command)
         or
              `command`
    
         Bash performs the expansion by executing command and replac-
         ing the command substitution with the standard output of the
         command, with any trailing newlines deleted.  Embedded  new-
         lines  are  not deleted, but they may be removed during word
         splitting.  The command  substitution  $(cat  file)  can  be
         replaced by the equivalent but faster $(< file).
    
         When the old-style backquote form of substitution  is  used,
         backslash  retains  its literal meaning except when followed
         by $, `, or \.   The  first  backquote  not  preceded  by  a
         backslash  terminates  the command substitution.  When using
         the $(command) form, all characters between the  parentheses
         make up the command; none are treated specially.
    
    
         Command substitutions may be nested.  To nest when using the
         backquoted   form,   escape   the   inner   backquotes  with
         backslashes.
    
         If the  substitution  appears  within  double  quotes,  word
         splitting  and  pathname  expansion are not performed on the
         results.
    
      Arithmetic Expansion
         Arithmetic expansion allows the evaluation of an  arithmetic
         expression  and  the substitution of the result.  The format
         for arithmetic expansion is:
    
              $((expression))
    
         The expression is  treated  as  if  it  were  within  double
         quotes,  but  a  double  quote inside the parentheses is not
         treated specially.  All tokens  in  the  expression  undergo
         parameter expansion, string expansion, command substitution,
         and quote removal.  Arithmetic substitutions may be nested.
    
         The evaluation is performed according to  the  rules  listed
         below   under   ARITHMETIC  EVALUATION.   If  expression  is
         invalid, bash prints a message  indicating  failure  and  no
         substitution occurs.
    
      Process Substitution
         Process substitution is supported on  systems  that  support
         named  pipes  (FIFOs)  or  the /dev/fd method of naming open
         files.  It takes the form of <(list) or >(list).   The  pro-
         cess  list  is  run  with its input or output connected to a
         FIFO or some file in /dev/fd.  The  name  of  this  file  is
         passed  as  an argument to the current command as the result
         of the expansion.  If the >(list) form is used,  writing  to
         the  file  will provide input for list.  If the <(list) form
         is used, the file passed as an argument should  be  read  to
         obtain the output of list.
    
         When available, process substitution is performed simultane-
         ously with parameter and variable expansion, command substi-
         tution, and arithmetic expansion.
    
      Word Splitting
         The shell scans the results of parameter expansion,  command
         substitution,  and  arithmetic  expansion that did not occur
         within double quotes for word splitting.
    
         The shell treats each character of IFS as a  delimiter,  and
         splits  the  results  of  the other expansions into words on
         these characters.  If IFS is unset, or its value is  exactly
         <space><tab><newline>, the default, then any sequence of IFS
         characters serves to delimit words.   If  IFS  has  a  value
         other  than  the  default,  then sequences of the whitespace
         characters space and tab are ignored at  the  beginning  and
         end  of  the word, as long as the whitespace character is in
         the value of IFS (an IFS whitespace character).  Any charac-
         ter  in IFS that is not IFS whitespace, along with any adja-
         cent  IFS  whitespace  characters,  delimits  a  field.    A
         sequence  of  IFS whitespace characters is also treated as a
         delimiter.  If the value of IFS is null, no  word  splitting
         occurs.
    
         Explicit null arguments ("" or '') are  retained.   Unquoted
         implicit  null  arguments,  resulting  from the expansion of
         parameters that have no values, are removed.  If a parameter
         with no value is expanded within double quotes, a null argu-
         ment results and is retained.
    
         Note that if no expansion occurs, no splitting is performed.
    
      Pathname Expansion
         After word splitting, unless the -f  option  has  been  set,
         bash  scans each word for the characters *, ?, (, and [.  If
         one of these characters appears, then the word  is  regarded
         as  a  pattern,  and  replaced with an alphabetically sorted
         list of file names matching the  pattern.   If  no  matching
         file  names are found, and the shell option nullglob is dis-
         abled, the word is left unchanged.  If the  nullglob  option
         is  set,  and no matches are found, the word is removed.  If
         the shell option nocaseglob is enabled, the  match  is  per-
         formed  without regard to the case of alphabetic characters.
         When a pattern is used for pathname expansion, the character
         ``.''  at  the  start  of  a name or immediately following a
         slash must be matched explicitly, unless  the  shell  option
         dotglob is set.  When matching a pathname, the slash charac-
         ter must always be matched explicitly.  In other cases,  the
         ``.''  character is not treated specially.  See the descrip-
         tion of shopt below  under  SHELL  BUILTIN  COMMANDS  for  a
         description  of  the nocaseglob, nullglob, and dotglob shell
         options.
    
         The GLOBIGNORE shell variable may be used  to  restrict  the
         set of file names matching a pattern.  If GLOBIGNORE is set,
         each matching file name that also matches one  of  the  pat-
         terns  in  GLOBIGNORE  is  removed from the list of matches.
         The file names ``.'' and ``..''  are  always  ignored,  even
         when GLOBIGNORE is set.  However, setting GLOBIGNORE has the
         effect of enabling the dotglob shell option,  so  all  other
         file  names  beginning  with a ``.'' will match.  To get the
         old behavior of ignoring file names beginning with a  ``.'',
         make  ``.*'' one of the patterns in GLOBIGNORE.  The dotglob
         option is disabled when GLOBIGNORE is unset.
    
    
         Pattern Matching
    
         Any character that appears in a pattern, other than the spe-
         cial  pattern  characters  described  below, matches itself.
         The NUL character may not occur in a pattern.   The  special
         pattern  characters must be quoted if they are to be matched
         literally.
    
         The special pattern characters have the following meanings:
    
         *    Matches any string, including the null string.
         ?    Matches any single character.
         [...]
              Matches any one of the enclosed characters.  A pair  of
              characters  separated  by a minus sign denotes a range;
              any character lexically between those  two  characters,
              inclusive,  is matched.  If the first character follow-
              ing the [ is a ! or a ^ then any character not enclosed
              is  matched.  A - may be matched by including it as the
              first or last character in the set.  A ] may be matched
              by including it as the first character in the set.
    
              Within [ and ],  character  classes  can  be  specified
              using  the  syntax [:class:], where class is one of the
              following classes defined in the POSIX.2 standard:
              alnum alpha ascii blank cntrl digit graph  lower  print
              punct space upper xdigit
              A character class matches any  character  belonging  to
              that class.
    
              Within [ and ], an equivalence class can  be  specified
              using  the  syntax  [=c=], which matches all characters
              with the same  collation  weight  (as  defined  by  the
              current locale) as the character c.
    
              Within [ and ], the syntax [.symbol.] matches the  col-
              lating symbol symbol.
    
         If the extglob shell option is enabled using the shopt buil-
         tin,  several extended pattern matching operators are recog-
         nized.  In the following description, a  pattern-list  is  a
         list  of  one  or more patterns separated by a |.  Composite
         patterns may be formed using one or more  of  the  following
         sub-patterns:
    
              ?(pattern-list)
                   Matches zero or one occurrence of the  given  pat-
                   terns
              *(pattern-list)
                   Matches zero or more occurrences of the given pat-
                   terns
              +(pattern-list)
                   Matches one or more occurrences of the given  pat-
                   terns
              @(pattern-list)
                   Matches exactly one of the given patterns
              !(pattern-list)
                   Matches anything except one of the given patterns
    
      Quote Removal
         After the preceding expansions, all unquoted occurrences  of
         the  characters  \, ', and " that did not result from one of
         the above expansions are removed.
    
    REDIRECTION
         Before a command is executed, its input and  output  may  be
         redirected  using  a  special  notation  interpreted  by the
         shell.  Redirection may also be used to open and close files
         for  the current shell execution environment.  The following
         redirection operators may precede or appear anywhere  within
         a  simple command or may follow a command.  Redirections are
         processed in the order they appear, from left to right.
    
         In the following descriptions, if the file descriptor number
         is  omitted,  and  the  first  character  of the redirection
         operator is <, the redirection refers to the standard  input
         (file descriptor 0).  If the first character of the redirec-
         tion operator is >, the redirection refers to  the  standard
         output (file descriptor 1).
    
         The word following the redirection operator in the following
         descriptions,  unless otherwise noted, is subjected to brace
         expansion, tilde  expansion,  parameter  expansion,  command
         substitution, arithmetic expansion, quote removal, and path-
         name expansion.  If it expands to more than one  word,  bash
         reports an error.
    
         Note that the order of  redirections  is  significant.   For
         example, the command
    
              ls > dirlist 2>&1
    
         directs both standard output and standard error to the  file
         dirlist, while the command
    
              ls 2>&1 > dirlist
    
         directs only the standard output to  file  dirlist,  because
         the  standard error was duplicated as standard output before
         the standard output was redirected to dirlist.
    
         A failure to open or create a file causes the redirection to
         fail.
    
      Redirecting Input
         Redirection of input causes the file whose name results from
         the  expansion  of  word  to  be  opened for reading on file
         descriptor n, or the standard input (file descriptor 0) if n
         is not specified.
    
         The general format for redirecting input is:
    
              [n]<word
    
      Redirecting Output
         Redirection of output causes the  file  whose  name  results
         from  the expansion of word to be opened for writing on file
         descriptor n, or the standard output (file descriptor 1)  if
         n  is  not  specified.   If  the  file  does not exist it is
         created; if it does exist it is truncated to zero size.
    
         The general format for redirecting output is:
    
              [n]>word
    
         If the redirection operator is >, and the  noclobber  option
         to  the  set  builtin has been enabled, the redirection will
         fail if the filename whose name results from  the  expansion
         of  word  exists  and is a regular file.  If the redirection
         operator is >|, or the redirection operator  is  >  and  the
         noclobber  option to the set builtin command is not enabled,
         the redirection is attempted even if the file named by  word
         exists.
    
      Appending Redirected Output
         Redirection of output in this fashion causes the file  whose
         name  results  from  the  expansion of word to be opened for
         appending on file descriptor n, or the standard output (file
         descriptor  1)  if n is not specified.  If the file does not
         exist it is created.
    
         The general format for appending output is:
    
              [n]>>word
    
      Redirecting Standard Output and Standard Error
         Bash allows both the standard output (file descriptor 1) and
         the   standard  error  output  (file  descriptor  2)  to  be
         redirected to the file whose name is the expansion  of  word
         with this construct.
    
         There are two formats for redirecting  standard  output  and
         standard error:
    
              &>word
         and
              >&word
    
         Of the two forms, the first is preferred.  This is  semanti-
         cally equivalent to
    
              >word 2>&1
    
      Here Documents
         This type of redirection instructs the shell to  read  input
         from  the  current  source until a line containing only word
         (with no trailing blanks) is seen.  All of the lines read up
         to that point are then used as the standard input for a com-
         mand.
    
         The format of here-documents is as follows:
    
              <<[-]word
                      here-document
              delimiter
    
         No  parameter  expansion,  command  substitution,   pathname
         expansion, or arithmetic expansion is performed on word.  If
         any characters in word are  quoted,  the  delimiter  is  the
         result  of quote removal on word, and the lines in the here-
         document are not expanded.  If word is unquoted,  all  lines
         of  the  here-document are subjected to parameter expansion,
         command substitution,  and  arithmetic  expansion.   In  the
         latter  case,  the pair \<newline> is ignored, and \ must be
         used to quote the characters \, $, and `.
    
         If the redirection operator is <<-,  then  all  leading  tab
         characters  are  stripped from input lines and the line con-
         taining delimiter.  This allows here-documents within  shell
         scripts to be indented in a natural fashion.
    
      Duplicating File Descriptors
         The redirection operator
    
              [n]<&word
    
         is used  to  duplicate  input  file  descriptors.   If  word
         expands  to  one or more digits, the file descriptor denoted
         by n is made to be a copy of that file descriptor.   If  the
         digits  in  word  do  not specify a file descriptor open for
         input, a redirection error occurs.  If word evaluates to  -,
         file  descriptor  n  is  closed.  If n is not specified, the
         standard input (file descriptor 0) is used.
    
         The operator
    
              [n]>&word
    
         is used similarly to duplicate output file descriptors.   If
         n  is not specified, the standard output (file descriptor 1)
         is used.  If the digits  in  word  do  not  specify  a  file
         descriptor  open for output, a redirection error occurs.  As
         a special case, if n is omitted, and word does not expand to
         one  or  more digits, the standard output and standard error
         are redirected as described previously.
    
      Opening File Descriptors for Reading and Writing
         The redirection operator
    
              [n]<>word
    
         causes the file whose name is the expansion of  word  to  be
         opened for both reading and writing on file descriptor n, or
         on file descriptor 0 if n is not  specified.   If  the  file
         does not exist, it is created.
    
    ALIASES
         Aliases allow a string to be substituted for a word when  it
         is  used  as  the first word of a simple command.  The shell
         maintains a list of aliases that may be set and  unset  with
         the  alias  and  unalias builtin commands (see SHELL BUILTIN
         COMMANDS  below).   The  first  word  of  each  command,  if
         unquoted, is checked to see if it has an alias.  If so, that
         word is replaced by the text of the alias.  The  alias  name
         and  the replacement text may contain any valid shell input,
         including the metacharacters listed above, with  the  excep-
         tion  that the alias name may not contain =.  The first word
         of the replacement text is tested for aliases,  but  a  word
         that is identical to an alias being expanded is not expanded
         a second time.  This means that one may alias ls to  ls  -F,
         for  instance,  and  bash does not try to recursively expand
         the replacement text.  If the last character  of  the  alias
         value  is  a blank, then the next command word following the
         alias is also checked for alias expansion.
    
         Aliases are created and listed with the alias  command,  and
         removed with the unalias command.
    
         There is no mechanism for using arguments in the replacement
         text.   If  arguments are needed, a shell function should be
         used.
    
         Aliases are not expanded when the shell is not  interactive,
         unless  the  expand_aliases  shell option is set using shopt
         (see the description of shopt under SHELL  BUILTIN  COMMANDS
         below).
    
         The rules concerning the definition and use of  aliases  are
         somewhat confusing.  Bash always reads at least one complete
         line of input before executing any of the commands  on  that
         line.  Aliases are expanded when a command is read, not when
         it is executed.  Therefore, an alias definition appearing on
         the  same line as another command does not take effect until
         the next line of input is read.  The commands following  the
         alias  definition  on  that line are not affected by the new
         alias.  This behavior is also an issue  when  functions  are
         executed.   Aliases  are expanded when a function definition
         is read, not when the function is executed, because a  func-
         tion  definition  is itself a compound command.  As a conse-
         quence, aliases defined in  a  function  are  not  available
         until  after  that function is executed.  To be safe, always
         put alias definitions on a separate line,  and  do  not  use
         alias in compound commands.
    
         For almost every purpose, aliases are  superseded  by  shell
         functions.
    
    FUNCTIONS
         A shell function, defined as  described  above  under  SHELL
         GRAMMAR,  stores  a  series of commands for later execution.
         Functions are executed in the context of the current  shell;
         no  new  process is created to interpret them (contrast this
         with the execution of a shell script).  When a  function  is
         executed,  the  arguments  to  the function become the posi-
         tional parameters during its execution.  The special parame-
         ter  # is updated to reflect the change.  Positional parame-
         ter 0 is unchanged.  All other aspects of the  shell  execu-
         tion  environment  are  identical between a function and its
         caller with the exception  that  the  DEBUG  trap  (see  the
         description of the trap builtin under SHELL BUILTIN COMMANDS
         below) is not inherited.
    
         Variables local to the function may  be  declared  with  the
         local  builtin  command.   Ordinarily,  variables  and their
         values are shared between the function and its caller.
    
         If the builtin command return is executed in a function, the
         function  completes and execution resumes with the next com-
         mand after the function call.  When  a  function  completes,
         the  values  of  the  positional  parameters and the special
         parameter # are restored to the values they had prior to the
         function's execution.
    
         Function names and definitions may be  listed  with  the  -f
         option  to  the declare or typeset builtin commands.  The -F
         option to declare or typeset will list  the  function  names
         only.  Functions may be exported so that subshells automati-
         cally have them defined with the -f  option  to  the  export
         builtin.
    
         Functions may be recursive.  No  limit  is  imposed  on  the
         number of recursive calls.
    
    ARITHMETIC EVALUATION
         The shell allows arithmetic  expressions  to  be  evaluated,
         under certain circumstances (see the let builtin command and
         Arithmetic Expansion).  Evaluation is done in long  integers
         with  no check for overflow, though division by 0 is trapped
         and flagged as an error.  The following list of operators is
         grouped into levels of equal-precedence operators.  The lev-
         els are listed in order of decreasing precedence.
    
         - +  unary minus and plus
         ! ~  logical and bitwise negation
         **   exponentiation
         * / %
              multiplication, division, remainder
         + -  addition, subtraction
         << >>
              left and right bitwise shifts
         <= >= < >
              comparison
         == !=
              equality and inequality
         &    bitwise AND
         ^    bitwise exclusive OR
         |    bitwise OR
         &&   logical AND
         ||   logical OR
         expr?expr:expr
              conditional evaluation
         = *= /= %= += -=
              assignment
    
         Shell variables are allowed as operands; parameter expansion
         is  performed  before the expression is evaluated. The value
         of a parameter is  coerced  to  a  long  integer  within  an
         expression.   A  shell  variable  need  not have its integer
         attribute turned on to be used in an expression.
    
         Constants with a leading 0 are interpreted as octal numbers.
         A  leading 0x or 0X denotes hexadecimal.  Otherwise, numbers
         take the form [base#]n,  where  base  is  a  decimal  number
         between  2 and 64 representing the arithmetic base, and n is
         a number in that base.  If base is omitted, then base 10  is
         used.   The  digits  greater  than  9 are represented by the
         lowercase letters, the uppercase letters, _, and @, in  that
         order.   If  base is less than or equal to 36, lowercase and
         uppercase letters may be used  interchangably  to  represent
         numbers between 10 and 35.
    
         Operators  are  evaluated  in  order  of  precedence.   Sub-
         expressions in parentheses are evaluated first and may over-
         ride the precedence rules above.
    
    CONDITIONAL EXPRESSIONS
         Conditional expressions are used by the [[ compound  command
         and  the test and [ builtin commands to test file attributes
         and perform string and arithmetic comparisons.   Expressions
         are formed from the following unary or binary primaries.  If
         any file argument to one of the primaries  is  of  the  form
         /dev/fd/n, then file descriptor n is checked.
    
         -a file
              True if file exists.
         -b file
              True if file exists and is a block special file.
         -c file
              True if file exists and is a character special file.
         -d file
              True if file exists and is a directory.
         -e file
              True if file exists.
         -f file
              True if file exists and is a regular file.
         -g file
              True if file exists and is set-group-id.
         -h file
              True if file exists and is a symbolic link.
         -k file
              True if file exists and its ``sticky'' bit is set.
         -p file
              True if file exists and is a named pipe (FIFO).
         -r file
              True if file exists and is readable.
         -s file
              True if file exists and has a size greater than zero.
         -t fd
              True if file descriptor fd is open and refers to a ter-
              minal.
         -u file
              True if file exists and its set-user-id bit is set.
         -w file
              True if file exists and is writable.
         -x file
              True if file exists and is executable.
         -O file
              True if file exists and is owned by the effective  user
              id.
         -G file
              True if file exists and is owned by the effective group
              id.
         -L file
              True if file exists and is a symbolic link.
         -S file
              True if file exists and is a socket.
         -N file
              True if file exists and has been modified since it  was
              last read.
         file1 -nt file2
              True if file1 is newer (according to modification date)
              than file2.
         file1 -ot file2
              True if file1 is older than file2.
         file1 -ef file2
              True if file1 and file2 have the same device and  inode
              numbers.
         -o optname
              True if shell option optname is enabled.  See the  list
              of  options  under  the description of the -o option to
              the set builtin below.
         -z string
              True if the length of string is zero.
         -n string
         string
              True if the length of string is non-zero.
         string1 == string2
              True if the strings are equal.  = may be used in  place
              of ==.
         string1 != string2
              True if the strings are not equal.
         string1 < string2
              True if string1 sorts before string2  lexicographically
              in the current locale.
         string1 > string2
              True if string1 sorts after  string2  lexicographically
              in the current locale.
         arg1 OP arg2
              OP is one of -eq, -ne, -lt, -le, -gt,  or  -ge.   These
              arithmetic  binary  operators  return  true  if arg1 is
              equal to, not equal to, less than, less than  or  equal
              to,  greater  than,  or  greater than or equal to arg2,
              respectively.  Arg1 and arg2 may be positive  or  nega-
              tive integers.
    
    SIMPLE COMMAND EXPANSION
         When a simple command is executed, the  shell  performs  the
         following  expansions,  assignments,  and redirections, from
         left to right.
    
         1.   The words  that  the  parser  has  marked  as  variable
              assignments  (those  preceding  the  command  name) and
              redirections are saved for later processing.
    
         2.   The words that are not variable assignments or redirec-
              tions  are  expanded.  If any words remain after expan-
              sion, the first word is taken to be  the  name  of  the
              command and the remaining words are the arguments.
    
         3.   Redirections are performed  as  described  above  under
              REDIRECTION.
    
         4.   The text after the = in each variable assignment under-
              goes tilde expansion, parameter expansion, command sub-
              stitution,  arithmetic  expansion,  and  quote  removal
              before being assigned to the variable.
    
         If no command name results, the variable assignments  affect
         the current shell environment.  Otherwise, the variables are
         added to the environment of the executed command and do  not
         affect the current shell environment.  If any of the assign-
         ments attempts to assign a value to a readonly variable,  an
         error occurs, and the command exits with a non-zero status.
    
         If no command name results, redirections are performed,  but
         do  not affect the current shell environment.  A redirection
         error causes the command to exit with a non-zero status.
    
         If there is a command name left after  expansion,  execution
         proceeds  as described below.  Otherwise, the command exits.
         If one of the expansions contained a  command  substitution,
         the  exit  status  of  the command is the exit status of the
         last command substitution performed.  If there were no  com-
         mand substitutions, the command exits with a status of zero.
    
    COMMAND EXECUTION
         After a command has been split into words, if it results  in
         a simple command and an optional list of arguments, the fol-
         lowing actions are taken.
    
         If the command name contains no slashes, the shell  attempts
         to  locate  it.   If  there  exists a shell function by that
         name, that function is invoked as described above  in  FUNC-
         TIONS.   If  the  name  does not match a function, the shell
         searches for it in the list of shell builtins.  If  a  match
         is found, that builtin is invoked.
    
         If the name is neither a shell function nor a  builtin,  and
         contains  no slashes, bash searches each element of the PATH
         for a directory containing an executable file by that  name.
         Bash  uses  a  hash table to remember the full file names of
         executable files (see  hash  under  SHELL  BUILTIN  COMMANDS
         below).   A  full  search of the directories in PATH is per-
         formed only if the command is not found in the  hash  table.
         If  the  search  is  unsuccessful, the shell prints an error
         message and returns an exit status of 127.
    
         If the search is successful, or if the command name contains
         one or more slashes, the shell executes the named program in
         a separate execution environment.  Argument 0 is set to  the
         name  given,  and the remaining arguments to the command are
         set to the arguments given, if any.
    
         If this execution fails because the file is not  in  execut-
         able  format, and the file is not a directory, it is assumed
         to be a shell script, a file containing shell  commands.   A
         subshell is spawned to execute it.  This subshell reinitial-
         izes itself, so that the effect is as if  a  new  shell  had
         been  invoked  to handle the script, with the exception that
         the locations of commands remembered by the parent (see hash
         below  under  SHELL  BUILTIN  COMMANDS)  are retained by the
         child.
    
         If the program is a file beginning with #!, the remainder of
         the  first  line  specifies  an interpreter for the program.
         The shell executes the specified  interpreter  on  operating
         systems  that  do  not  handle  this executable format them-
         selves.  The arguments to the interpreter consist of a  sin-
         gle  optional argument following the interpreter name on the
         first line of the program, followed by the name of the  pro-
         gram, followed by the command arguments, if any.
    
    COMMAND EXECUTION ENVIRONMENT
         The shell has an execution environment,  which  consists  of
         the following:
    
    
         o    open files inherited by the  shell  at  invocation,  as
              modified by redirections supplied to the exec builtin
    
         o    the current working directory as set by cd,  pushd,  or
              popd, or inherited by the shell at invocation
    
         o    the file creation mode mask as set by umask  or  inher-
              ited from the shell's parent
    
         o    current traps set by trap
    
         o    shell parameters that are set by variable assignment or
              with  set  or  inherited from the shell's parent in the
              environment
    
         o    shell functions defined during execution  or  inherited
              from the shell's parent in the environment
    
         o    options enabled at invocation  (either  by  default  or
              with command-line arguments) or by set
    
         o    options enabled by shopt
    
         o    shell aliases defined with alias
    
         o    various process  IDs,  including  those  of  background
              jobs, the value of $$, and the value of $PPID
    
         When a simple command other than a builtin or shell function
         is  to  be  executed,  it is invoked in a separate execution
         environment that consists of the following.   Unless  other-
         wise noted, the values are inherited from the shell.
    
    
         o    the shell's open  files,  plus  any  modifications  and
              additions specified by redirections to the command
    
         o    the current working directory
    
         o    the file creation mode mask
    
         o    shell variables marked for export, along with variables
              exported for the command, passed in the environment
    
         o    traps caught by the shell are reset to the  values  the
              inherited from the shell's parent, and traps ignored by
              the shell are ignored
    
         A command invoked in this separate environment cannot affect
         the shell's execution environment.
    
         Command substitution and asynchronous commands  are  invoked
         in  a  subshell environment that is a duplicate of the shell
         environment, except that traps caught by the shell are reset
         to  the  values  that the shell inherited from its parent at
         invocation.  Builtin commands that are invoked as part of  a
         pipeline  are  also  executed  in  a  subshell  environment.
         Changes made to the subshell environment cannot  affect  the
         shell's execution environment.
    
    ENVIRONMENT
         When a program is invoked it is given an  array  of  strings
         called the environment.  This is a list of name-value pairs,
         of the form name=value.
    
         The shell  allows  you  to  manipulate  the  environment  in
         several  ways.   On  invocation,  the  shell  scans  its own
         environment and creates a parameter  for  each  name  found,
         automatically  marking  it  for  export  to child processes.
         Executed commands inherit the environment.  The  export  and
         declare  -x  commands  allow  parameters and functions to be
         added to and deleted from the environment.  If the value  of
         a  parameter  in  the environment is modified, the new value
         becomes part of the environment,  replacing  the  old.   The
         environment  inherited  by  any executed command consists of
         the shell's initial environment, whose values may  be  modi-
         fied  in the shell, less any pairs removed by the unset com-
         mand, plus any additions  via  the  export  and  declare  -x
         commands.
    
         The environment for any simple command or  function  may  be
         augmented temporarily by prefixing it with parameter assign-
         ments, as described above in PARAMETERS.   These  assignment
         statements affect only the environment seen by that command.
    
         If the -k option is set (see the set builtin command below),
         then all parameter assignments are placed in the environment
         for a command, not just those that precede the command name.
    
         When bash invokes an external command, the variable _ is set
         to the full file name of the command and passed to that com-
         mand in its environment.
    
    EXIT STATUS
         For the shell's purposes, a command which exits with a  zero
         exit status has succeeded.  An exit status of zero indicates
         success.  A non-zero exit status indicates failure.  When  a
         command terminates on a fatal signal, bash uses the value of
         128+signal as the exit status.
    
         If a command is not found, the child process created to exe-
         cute  it returns a status of 127.  If a command is found but
         is not executable, the return status is 126.
    
         If a command fails because of an error during  expansion  or
         redirection, the exit status is greater than zero.
    
         Shell builtin commands return a status of 0 (true)  if  suc-
         cessful,  and non-zero (false) if an error occurs while they
         execute. All builtins return an exit status of 2 to indicate
         incorrect usage.
    
         Bash itself returns the exit status of the last command exe-
         cuted,  unless a syntax error occurs, in which case it exits
         with a non-zero value.  See also the  exit  builtin  command
         below.
    
    SIGNALS
         When bash is interactive, in the absence of  any  traps,  it
         ignores SIGTERM (so that kill 0 does not kill an interactive
         shell), and SIGINT is caught and handled (so that  the  wait
         builtin  is  interruptible).   In  all  cases,  bash ignores
         SIGQUIT.  If job control is in effect, bash ignores SIGTTIN,
         SIGTTOU, and SIGTSTP.
    
         Synchronous jobs started by bash have signal handlers set to
         the values inherited by the shell from its parent.  When job
         control is not in effect, asynchronous commands ignore  SIG-
         INT  and  SIGQUIT as well.  Commands run as a result of com-
         mand substitution ignore the keyboard-generated job  control
         signals SIGTTIN, SIGTTOU, and SIGTSTP.
    
         The shell exits by default upon receipt of a SIGHUP.  Before
         exiting,  it  resends  the  SIGHUP  to  all jobs, running or
         stopped.  Stopped jobs are sent SIGCONT to ensure that  they
         receive  the  SIGHUP.  To prevent the shell from sending the
         signal to a particular job, it should be  removed  from  the
         jobs  table  with the disown builtin (see SHELL BUILTIN COM-
         MANDS below) or marked to not receive  SIGHUP  using  disown
         -h.
    
         If the huponexit shell option has been set with shopt,  bash
         sends  a  SIGHUP to all jobs when an interactive login shell
         exits.
    
         When bash receives a signal for which a trap  has  been  set
         while  waiting  for a command to complete, the trap will not
         be executed until the command completes.  When bash is wait-
         ing  for  an  asynchronous command via the wait builtin, the
         reception of a signal for which a trap  has  been  set  will
         cause  the  wait  builtin to return immediately with an exit
         status greater than 128, immediately after which the trap is
         executed.
    
    JOB CONTROL
         Job control  refers  to  the  ability  to  selectively  stop
         (suspend)  the  execution of processes and continue (resume)
         their execution at a later point.  A user typically  employs
         this  facility via an interactive interface supplied jointly
         by the system's terminal driver and bash.
    
         The shell associates a job with each pipeline.  It  keeps  a
         table  of currently executing jobs, which may be listed with
         the jobs command.  When bash starts a job asynchronously (in
         the background), it prints a line that looks like:
    
              [1] 25647
    
         indicating that this job is job number 1 and that  the  pro-
         cess  ID of the last process in the pipeline associated with
         this job is 25647.  All of the processes in a  single  pipe-
         line  are  members  of  the  same  job.   Bash  uses the job
         abstraction as the basis for job control.
    
         To facilitate the implementation of the  user  interface  to
         job  control,  the  system maintains the notion of a current
         terminal process group ID.  Members of  this  process  group
         (processes  whose  process  group ID is equal to the current
         terminal process group ID) receive  keyboard-generated  sig-
         nals  such as SIGINT.  These processes are said to be in the
         foreground.  Background processes are  those  whose  process
         group  ID  differs  from  the terminal's; such processes are
         immune  to  keyboard-generated  signals.   Only   foreground
         processes are allowed to read from or write to the terminal.
         Background processes which attempt to read from  (write  to)
         the terminal are sent a SIGTTIN (SIGTTOU) signal by the ter-
         minal driver, which, unless caught, suspends the process.
    
         If the operating system on which bash  is  running  supports
         job  control, bash allows you to use it.  Typing the suspend
         character (typically ^Z, Control-Z) while a process is  run-
         ning  causes  that  process to be stopped and returns you to
         bash.  Typing the delayed suspend character  (typically  ^Y,
         Control-Y) causes the process to be stopped when it attempts
         to read input from the terminal, and control to be  returned
         to  bash.   The  user  may then manipulate the state of this
         job, using the bg command to continue it in the  background,
         the fg command to continue it in the foreground, or the kill
         command to kill it.  A ^Z takes effect immediately, and  has
         the  additional  side  effect  of causing pending output and
         typeahead to be discarded.
    
         There are a number of ways to refer to a job in  the  shell.
         The  character % introduces a job name.  Job number n may be
         referred to as %n.  A job may also be referred  to  using  a
         prefix  of  the  name used to start it, or using a substring
         that appears in its command line.  For example,  %ce  refers
         to a stopped ce job.  If a prefix matches more than one job,
         bash reports an error.   Using  %?ce,  on  the  other  hand,
         refers  to  any  job containing the string ce in its command
         line.  If the substring matches  more  than  one  job,  bash
         reports  an  error.   The  symbols  %%  and  %+ refer to the
         shell's notion of the current job, which  is  the  last  job
         stopped  while  it  was  in the foreground or started in the
         background.  The previous job may be  referenced  using  %-.
         In  output  pertaining to jobs (e.g., the output of the jobs
         command), the current job is always flagged with  a  +,  and
         the previous job with a -.
    
         Simply naming a job can be used to bring it into  the  fore-
         ground:   %1 is a synonym for ``fg %1'', bringing job 1 from
         the background into the  foreground.   Similarly,  ``%1  &''
         resumes job 1 in the background, equivalent to ``bg %1''.
    
         The shell learns immediately whenever a job  changes  state.
         Normally,  bash  waits  until  it is about to print a prompt
         before reporting changes in a job's  status  so  as  to  not
         interrupt  any  other  output.   If the -b option to the set
         builtin  command  is  enabled,  bash  reports  such  changes
         immediately.
    
         If an attempt to exit bash is made while jobs  are  stopped,
         the  shell  prints  a warning message.  The jobs command may
         then be used to inspect their status.  If a  second  attempt
         to  exit  is  made without an intervening command, the shell
         does not print another warning, and  the  stopped  jobs  are
         terminated.
    
    PROMPTING
         When executing  interactively,  bash  displays  the  primary
         prompt  PS1  when  it  is  ready  to read a command, and the
         secondary prompt PS2 when it needs more input to complete  a
         command.   Bash allows these prompt strings to be customized
         by inserting a number of backslash-escaped  special  charac-
         ters that are decoded as follows:
              \a   an ASCII bell character (07)
              \d   the date in "Weekday  Month  Date"  format  (e.g.,
                   "Tue May 26")
              \e   an ASCII escape character (033)
              \h   the hostname up to the first `.'
              \H   the hostname
              \n   newline
              \r   carriage return
              \s   the name of the shell, the  basename  of  $0  (the
                   portion following the final slash)
              \t   the current time in 24-hour HH:MM:SS format
              \T   the current time in 12-hour HH:MM:SS format
              \@   the current time in 12-hour am/pm format
              \u   the username of the current user
              \v   the version of bash (e.g., 2.00)
              \V   the release of bash, version +  patchlevel  (e.g.,
                   2.00.0)
              \w   the current working directory
              \W   the basename of the current working directory
              \!   the history number of this command
              \#   the command number of this command
              \$   if the effective UID is 0, a #, otherwise a $
              \nnn the character corresponding to  the  octal  number
                   nnn
              \\   a backslash
              \[   begin a sequence of non-printing characters, which
                   could be used to embed a terminal control sequence
                   into the prompt
              \]   end a sequence of non-printing characters
    
         The command number and the history number are  usually  dif-
         ferent:   the history number of a command is its position in
         the history list, which may include commands  restored  from
         the  history  file  (see  HISTORY  below), while the command
         number is the position in the sequence of commands  executed
         during  the  current  shell  session.   After  the string is
         decoded, it is expanded  via  parameter  expansion,  command
         substitution,  arithmetic  expansion,  string expansion, and
         quote removal, subject to the value of the promptvars  shell
         option (see the description of the shopt command under SHELL
         BUILTIN COMMANDS below).
    
    READLINE
         This is the library that handles reading input when using an
         interactive shell, unless the --noediting option is given at
         shell invocation.  By default, the line editing commands are
         similar  to  those of emacs.  A vi-style line editing inter-
         face is also available.  To turn off line editing after  the
         shell  is  running, use the +o emacs or +o vi options to the
         set builtin (see SHELL BUILTIN COMMANDS below).
    
      Readline Notation
         In this section, the emacs-style notation is used to  denote
         keystrokes.   Control  keys  are denoted by C-key, e.g., C-n
         means Control-N.  Similarly, meta keys are denoted by M-key,
         so  M-x means Meta-X.  (On keyboards without a meta key, M-x
         means ESC x, i.e., press the Escape  key  then  the  x  key.
         This makes ESC the meta prefix.  The combination M-C-x means
         ESC-Control-x, or press the Escape key then hold the Control
         key while pressing the x key.)
    
         Readline commands may be given numeric arguments, which nor-
         mally  act as a repeat count.  Sometimes, however, it is the
         sign of the argument that is significant.  Passing  a  nega-
         tive  argument  to a command that acts in the forward direc-
         tion (e.g., kill-line) causes that command to act in a back-
         ward direction. Commands whose behavior with arguments devi-
         ates from this are noted below.
    
         When a command  is  described  as  killing  text,  the  text
         deleted  is  saved  for possible future retrieval (yanking).
         The killed text is saved in a kill ring.  Consecutive  kills
         cause the text to be accumulated into one unit, which can be
         yanked all at once. Commands which do not kill text separate
         the chunks of text on the kill ring.
    
      Readline Initialization
         Readline is customized by putting commands in an initializa-
         tion  file  (the  inputrc  file).   The name of this file is
         taken from the value of the INPUTRC variable.  If that vari-
         able  is  unset,  the default is ~/.inputrc.  When a program
         which uses the readline library starts up,  the  initializa-
         tion  file  is  read, and the key bindings and variables are
         set.  There are only a few basic constructs allowed  in  the
         readline  initialization  file.   Blank  lines  are ignored.
         Lines beginning with a # are comments.  Lines beginning with
         a $ indicate conditional constructs.  Other lines denote key
         bindings and variable settings.
    
         The default key-bindings may  be  changed  with  an  inputrc
         file.   Other  programs  that use this library may add their
         own commands and bindings.
    
    
         For example, placing
    
              M-Control-u: universal-argument
         or
              C-Meta-u: universal-argument
         into the inputrc would make M-C-u execute the readline  com-
         mand universal-argument.
    
         The  following  symbolic  character  names  are  recognized:
         RUBOUT, DEL, ESC, LFD, NEWLINE, RET, RETURN, SPC, SPACE, and
         TAB.  In addition to command names, readline allows keys  to
         be  bound  to  a  string  that  is  inserted when the key is
         pressed (a macro).
    
      Readline Key Bindings
         The syntax for controlling key bindings in the inputrc  file
         is  simple.  All that is required is the name of the command
         or the text of a macro and a key sequence to which it should
         be  bound. The name may be specified in one of two ways:  as
         a symbolic key name, possibly with Meta-  or  Control-  pre-
         fixes,   or   as  a  key  sequence.   When  using  the  form
         keyname:function-name or macro, keyname is the name of a key
         spelled out in English.  For example:
    
              Control-u: universal-argument
              Meta-Rubout: backward-kill-word
              Control-o: "> output"
    
         In  the  above  example,  C-u  is  bound  to  the   function
         universal-argument,   M-DEL   is   bound   to  the  function
         backward-kill-word, and  C-o  is  bound  to  run  the  macro
         expressed  on  the  right  hand side (that is, to insert the
         text > output into the line).
    
         In the second form, "keyseq":function-name or macro,  keyseq
         differs  from  keyname  above  in  that  strings denoting an
         entire key sequence may be specified by placing the sequence
         within  double quotes.  Some GNU Emacs style key escapes can
         be used, as in the following example.
    
              "\C-u": universal-argument
              "\C-x\C-r": re-read-init-file
              "\e[11~": "Function Key 1"
    
         In  this  example,  C-u  is  again  bound  to  the  function
         universal-argument.   C-x  C-r  is  bound  to  the  function
         re-read-init-file, and ESC [ 1 1 ~ is bound  to  insert  the
         text Function Key 1.  The full set of GNU Emacs style escape
         sequences is
              \C-  control prefix
              \M-  meta prefix
              \e   an escape character
              \\   backslash
              " \" literal "
              \'   literal '
    
         In addition to the  GNU  Emacs  style  escape  sequences,  a
         second set of backslash escapes is available:
              \a   alert (bell)
              \b   backspace
              \d   delete
              \f   form feed
              \n   newline
              \r   carriage return
              \t   horizontal tab
              \v   vertical tab
              \nnn the character whose ASCII code is the octal  value
                   nnn (one to three digits)
              \xnnn
                   the character whose ASCII code is the  hexadecimal
                   value nnn (one to three digits)
    
         When entering the text of a macro, single or  double  quotes
         must  be used to indicate a macro definition.  Unquoted text
         is assumed to be a function name.  In the  macro  body,  the
         backslash  escapes  described above are expanded.  Backslash
         will quote any other character in the macro text,  including
         " and '.
    
         Bash  allows  the  current  readline  key  bindings  to   be
         displayed  or  modified  with the bind builtin command.  The
         editing mode may be switched during interactive use by using
         the  -o option to the set builtin command (see SHELL BUILTIN
         COMMANDS below).
    
      Readline Variables
         Readline has variables that can be used to further customize
         its  behavior.   A  variable  may be set in the inputrc file
         with a statement of the form
    
              set variable-name value
    
         Except where noted, readline variables can take  the  values
         On or Off.  The variables and their default values are:
    
         bell-style (audible)
              Controls what happens when readline wants to  ring  the
              terminal  bell.   If  set to none, readline never rings
              the bell.  If set to visible, readline uses  a  visible
              bell  if one is available.  If set to audible, readline
              attempts to ring the terminal's bell.
         comment-begin (``#'')
              The  string  that  is  inserted   when   the   readline
              insert-comment  command  is  executed.  This command is
              bound to M-# in emacs mode and to # in vi command mode.
         completion-ignore-case (Off)
              If set to On, readline performs filename  matching  and
              completion in a case-insensitive fashion.
         completion-query-items (100)
              This determines when the user is queried about  viewing
              the  number  of  possible  completions generated by the
              possible-completions command.  It may  be  set  to  any
              integer  value  greater  than or equal to zero.  If the
              number of possible completions is greater than or equal
              to  the  value  of  this  variable,  the  user is asked
              whether or not he wishes to view them;  otherwise  they
              are simply listed on the terminal.
         convert-meta (On)
              If set to On, readline will convert characters with the
              eighth  bit  set  to an ASCII key sequence by stripping
              the eighth bit and prepending an escape  character  (in
              effect, using escape as the meta prefix).
         disable-completion (Off)
              If set to On, readline will  inhibit  word  completion.
              Completion characters will be inserted into the line as
              if they had been mapped to self-insert.
         editing-mode (emacs)
              Controls whether readline begins  with  a  set  of  key
              bindings  similar  to emacs or vi.  editing-mode can be
              set to either emacs or vi.
         enable-keypad (Off)
              When set to On, readline will try to enable the  appli-
              cation  keypad  when  it  is called.  Some systems need
              this to enable the arrow keys.
         expand-tilde (Off)
              If set to on, tilde expansion is performed  when  read-
              line attempts word completion.
         horizontal-scroll-mode (Off)
              When set to On, makes readline use a  single  line  for
              display,  scrolling  the input horizontally on a single
              screen line when it  becomes  longer  than  the  screen
              width rather than wrapping to a new line.
         input-meta (Off)
              If set to On,  readline  will  enable  eight-bit  input
              (that is, it will not strip the high bit from the char-
              acters it  reads),  regardless  of  what  the  terminal
              claims it can support.  The name meta-flag is a synonym
              for this variable.
         isearch-terminators (``C-[C-J'')
              The string  of  characters  that  should  terminate  an
              incremental  search  without subsequently executing the
              character as a command.  If this variable has not  been
              given  a  value,  the  characters ESC and C-J will ter-
              minate an incremental search.
         keymap (emacs)
              Set the current readline  keymap.   The  set  of  valid
              keymap  names  is  emacs,  emacs-standard,  emacs-meta,
              emacs-ctlx,  vi,  vi-command,  and  vi-insert.   vi  is
              equivalent   to  vi-command;  emacs  is  equivalent  to
              emacs-standard.  The default value is emacs; the  value
              of editing-mode also affects the default keymap.
         mark-directories (On)
              If set to On, completed directory names  have  a  slash
              appended.
         mark-modified-lines (Off)
              If set to On, history lines that have been modified are
              displayed with a preceding asterisk (*).
         output-meta (Off)
              If set to On, readline will display characters with the
              eighth  bit set directly rather than as a meta-prefixed
              escape sequence.
         print-completions-horizontally (Off)
              If set to On, readline will  display  completions  with
              matches  sorted  horizontally  in  alphabetical  order,
              rather than down the screen.
         show-all-if-ambiguous (Off)
              This alters the  default  behavior  of  the  completion
              functions.   If  set  to on, words which have more than
              one possible completion cause the matches to be  listed
              immediately instead of ringing the bell.
         visible-stats (Off)
              If set to On, a character denoting  a  file's  type  as
              reported  by  stat(2)  is appended to the filename when
              listing possible completions.
    
      Readline Conditional Constructs
         Readline implements a facility similar in spirit to the con-
         ditional  compilation  features  of the C preprocessor which
         allows key bindings and variable settings to be performed as
         the result of tests.  There are four parser directives used.
    
         $if  The $if construct allows bindings to be made  based  on
              the  editing  mode,  the  terminal  being  used, or the
              application using  readline.   The  text  of  the  test
              extends  to  the  end  of  the  line; no characters are
              required to isolate it.
    
              mode The mode= form of the $if  directive  is  used  to
                   test  whether  readline  is  in  emacs or vi mode.
                   This may be used in conjunction with the set  key-
                   map  command, for instance, to set bindings in the
                   emacs-standard  and  emacs-ctlx  keymaps  only  if
                   readline is starting out in emacs mode.
    
              term The term= form may be used  to  include  terminal-
                   specific  key  bindings,  perhaps  to bind the key
                   sequences output by the terminal's function  keys.
                   The  word  on  the  right  side of the = is tested
                   against the both full name of the terminal and the
                   portion  of  the terminal name before the first -.
                   This allows sun to match both sun and sun-cmd, for
                   instance.
    
              application
                   The  application  construct  is  used  to  include
                   application-specific settings.  Each program using
                   the readline library sets  the  application  name,
                   and an initialization file can test for a particu-
                   lar  value.   This  could  be  used  to  bind  key
                   sequences  to functions useful for a specific pro-
                   gram.  For instance, the following command adds  a
                   key  sequence  that quotes the current or previous
                   word in Bash:
    
                   $if Bash
                   # Quote the current or previous word
                   "\C-xq": "\eb\"\ef\""
                   $endif
    
         $endif
              This command, as seen in  the  previous  example,  ter-
              minates an $if command.
    
         $else
              Commands in this branch of the $if directive  are  exe-
              cuted if the test fails.
    
         $include
              This directive takes a single filename as  an  argument
              and  reads  commands  and bindings from that file.  For
              example,   the   following   directive    would    read
              /etc/inputrc:
    
              $include  /etc/inputrc
    
      Searching
         Readline provides commands for searching through the command
         history (see HISTORY below) for lines containing a specified
         string.  There are two search modes:  incremental  and  non-
         incremental.
    
         Incremental searches begin before the user has finished typ-
         ing  the  search  string.   As  each character of the search
         string is typed, readline displays the next entry  from  the
         history  matching  the  string typed so far.  An incremental
         search requires only as many characters as  needed  to  find
         the  desired  history  entry.  The characters present in the
         value of the isearch-terminators variable are used  to  ter-
         minate an incremental search.  If that variable has not been
         assigned a value the Escape and  Control-J  characters  will
         terminate  an  incremental  search.  Control-G will abort an
         incremental search and restore the original line.  When  the
         search  is  terminated,  the  history  entry  containing the
         search string becomes  the  current  line.   To  find  other
         matching  entries  in  the  history  list, type Control-S or
         Control-R as appropriate.  This will search backward or for-
         ward  in  the history for the next entry matching the search
         string typed so far.  Any other  key  sequence  bound  to  a
         readline  command will terminate the search and execute that
         command.  For instance, a newline will terminate the  search
         and  accept the line, thereby executing the command from the
         history list.
    
         Non-incremental  searches  read  the  entire  search  string
         before  starting  to search for matching history lines.  The
         search string may be typed by the user or  be  part  of  the
         contents of the current line.
    
      Readline Command Names
         The following is a list of the names of the commands and the
         default  key  sequences  to  which  they are bound.  Command
         names without an accompanying key sequence  are  unbound  by
         default.
    
      Commands for Moving
         beginning-of-line (C-a)
              Move to the start of the current line.
         end-of-line (C-e)
              Move to the end of the line.
         forward-char (C-f)
              Move forward a character.
         backward-char (C-b)
              Move back a character.
         forward-word (M-f)
              Move forward to the end of the next  word.   Words  are
              composed   of   alphanumeric  characters  (letters  and
              digits).
         backward-word (M-b)
              Move back to the start of this, or the previous,  word.
              Words  are composed of alphanumeric characters (letters
              and digits).
         clear-screen (C-l)
              Clear the screen leaving the current line at the top of
              the screen.  With an argument, refresh the current line
              without clearing the screen.
         redraw-current-line
              Refresh the current line.
    
      Commands for Manipulating the History
         accept-line (Newline, Return)
              Accept the line regardless of where the cursor is.   If
              this  line  is  non-empty,  add  it to the history list
              according to the state of the HISTCONTROL variable.  If
              the  line  is a modified history line, then restore the
              history line to its original state.
         previous-history (C-p)
              Fetch the previous command from the history list,  mov-
              ing back in the list.
         next-history (C-n)
              Fetch the next command from the  history  list,  moving
              forward in the list.
         beginning-of-history (M-<)
              Move to the first line in the history.
         end-of-history (M->)
              Move to the end of the input history,  i.e.,  the  line
              currently being entered.
         reverse-search-history (C-r)
              Search backward starting at the current line and moving
              `up'  through  the  history  as  necessary.  This is an
              incremental search.
         forward-search-history (C-s)
              Search forward starting at the current line and  moving
              `down'  through  the  history as necessary.  This is an
              incremental search.
         non-incremental-reverse-search-history (M-p)
              Search backward through the  history  starting  at  the
              current  line  using  a  non-incremental  search  for a
              string supplied by the user.
         non-incremental-forward-search-history (M-n)
              Search  forward  through  the  history  using  a   non-
              incremental search for a string supplied by the user.
         history-search-forward
              Search forward through the history for  the  string  of
              characters  between  the  start of the current line and
              the current cursor position (the  point).   This  is  a
              non-incremental search.
         history-search-backward
              Search backward through the history for the  string  of
              characters  between  the  start of the current line and
              the point.  This is a non-incremental search.
         yank-nth-arg (M-C-y)
              Insert the first argument to the previous command (usu-
              ally  the  second  word  on the previous line) at point
              (the current cursor position).   With  an  argument  n,
              insert  the  nth  word  from  the previous command (the
              words in the previous command begin with  word  0).   A
              negative  argument inserts the nth word from the end of
              the previous command.
         yank-last-arg (M-., M-_)
              Insert the last argument to the previous  command  (the
              last  word  of  the  previous  history entry).  With an
              argument, behave exactly like yank-nth-arg.  Successive
              calls  to  yank-last-arg  move back through the history
              list, inserting the last argument of each line in turn.
    
         shell-expand-line (M-C-e)
              Expand the line as the shell does.  This performs alias
              and  history expansion as well as all of the shell word
              expansions.  See HISTORY EXPANSION below for a descrip-
              tion of history expansion.
         history-expand-line (M-^)
              Perform history expansion on  the  current  line.   See
              HISTORY  EXPANSION  below  for a description of history
              expansion.
         magic-space
              Perform history  expansion  on  the  current  line  and
              insert  a  space.   See  HISTORY  EXPANSION below for a
              description of history expansion.
         alias-expand-line
              Perform alias  expansion  on  the  current  line.   See
              ALIASES above for a description of alias expansion.
         history-and-alias-expand-line
              Perform history and  alias  expansion  on  the  current
              line.
         insert-last-argument (M-., M-_)
              A synonym for yank-last-arg.
         operate-and-get-next (C-o)
              Accept the current line for  execution  and  fetch  the
              next line relative to the current line from the history
              for editing.  Any argument is ignored.
    
      Commands for Changing Text
         delete-char (C-d)
              Delete the character under the cursor.  If point is  at
              the  beginning  of the line, there are no characters in
              the line, and the last character typed was not bound to
              delete-char, then return EOF.
         backward-delete-char (Rubout)
              Delete the character behind the cursor.  When  given  a
              numeric  argument,  save  the  deleted text on the kill
              ring.
         forward-backward-delete-char
              Delete the character under the cursor, unless the  cur-
              sor  is at the end of the line, in which case the char-
              acter behind the cursor is deleted.  By  default,  this
              is not bound to a key.
         quoted-insert (C-q, C-v)
              Add the next character  typed  to  the  line  verbatim.
              This is how to insert characters like C-q, for example.
         tab-insert (C-v TAB)
              Insert a tab character.
         self-insert (a, b, A, 1, !, ...)
              Insert the character typed.
         transpose-chars (C-t)
              Drag the character before point forward over the  char-
              acter at point.  Point moves forward as well.  If point
              is at the end of  the  line,  then  transpose  the  two
              characters  before  point.   Negative  arguments  don't
              work.
         transpose-words (M-t)
              Drag the word behind the cursor past the word in  front
              of the cursor moving the cursor over that word as well.
         upcase-word (M-u)
              Uppercase the current  (or  following)  word.   With  a
              negative  argument, uppercase the previous word, but do
              not move point.
         downcase-word (M-l)
              Lowercase the current  (or  following)  word.   With  a
              negative  argument, lowercase the previous word, but do
              not move point.
         capitalize-word (M-c)
              Capitalize the current (or  following)  word.   With  a
              negative argument, capitalize the previous word, but do
              not move point.
    
      Killing and Yanking
         kill-line (C-k)
              Kill the text from the current cursor position  to  the
              end of the line.
         backward-kill-line (C-x Rubout)
              Kill backward to the beginning of the line.
         unix-line-discard (C-u)
              Kill backward from point to the beginning of the  line.
              The killed text is saved on the kill-ring.
    
         kill-whole-line
              Kill all characters on  the  current  line,  no  matter
              where the cursor is.
         kill-word (M-d)
              Kill from the cursor to the end of the current word, or
              if  between  words,  to the end of the next word.  Word
              boundaries are the same as those used by forward-word.
         backward-kill-word (M-Rubout)
              Kill the word behind the cursor.  Word  boundaries  are
              the same as those used by backward-word.
         unix-word-rubout (C-w)
              Kill the word behind the cursor, using white space as a
              word  boundary.  The word boundaries are different from
              backward-kill-word.
         delete-horizontal-space (M-\)
              Delete all spaces and tabs around point.
         kill-region
              Kill the text between the point and mark (saved  cursor
              position).  This text is referred to as the region.
         copy-region-as-kill
              Copy the text in the region to the kill buffer.
         copy-backward-word
              Copy the word before point to  the  kill  buffer.   The
              word boundaries are the same as backward-word.
    
         copy-forward-word
              Copy the word following point to the kill buffer.   The
              word boundaries are the same as forward-word.
         yank (C-y)
              Yank the top of the kill ring into the  buffer  at  the
              cursor.
         yank-pop (M-y)
              Rotate the kill ring, and yank the new top.  Only works
              following yank or yank-pop.
    
      Numeric Arguments
         digit-argument (M-0, M-1, ..., M--)
              Add this digit to the argument already accumulating, or
              start a new argument.  M-- starts a negative argument.
         universal-argument
              This is another way to specify an  argument.   If  this
              command  is  followed by one or more digits, optionally
              with a leading minus  sign,  those  digits  define  the
              argument.   If  the command is followed by digits, exe-
              cuting universal-argument again ends the numeric  argu-
              ment,  but is otherwise ignored.  As a special case, if
              this command is immediately  followed  by  a  character
              that  is  neither  a  digit or minus sign, the argument
              count for the next command is multiplied by four.   The
              argument  count  is  initially  one,  so executing this
              function the first time makes the argument count  four,
              a  second time makes the argument count sixteen, and so
              on.
    
      Completing
         complete (TAB)
              Attempt to perform completion on the text before point.
              Bash  attempts  completion treating the text as a vari-
              able (if the text begins with $), username (if the text
              begins  with  ~), hostname (if the text begins with @),
              or command (including aliases and functions)  in  turn.
              If  none of these produces a match, filename completion
              is attempted.
         possible-completions (M-?)
              List the possible completions of the text before point.
         insert-completions (M-*)
              Insert all completions of the text  before  point  that
              would have been generated by possible-completions.
         menu-complete
              Similar to complete, but replaces the word to  be  com-
              pleted  with  a  single match from the list of possible
              completions.  Repeated execution of menu-complete steps
              through  the  list  of  possible completions, inserting
              each match in turn.  At the end of the list of  comple-
              tions,  the  bell  is  rung  and  the  original text is
              restored.  An argument of n moves n  positions  forward
              in the list of matches; a negative argument may be used
              to move backward through the  list.   This  command  is
              intended to be bound to TAB, but is unbound by default.
         delete-char-or-list
              Deletes the character under the cursor if  not  at  the
              beginning or end of the line (like delete-char).  If at
              the end of the line, behaves identically  to  possible-
              completions.  This command is unbound by default.
         complete-filename (M-/)
              Attempt filename completion on the text before point.
         possible-filename-completions (C-x /)
              List the possible completions of the text before point,
              treating it as a filename.
         complete-username (M-~)
              Attempt completion on the text before  point,  treating
              it as a username.
         possible-username-completions (C-x ~)
              List the possible completions of the text before point,
              treating it as a username.
         complete-variable (M-$)
              Attempt completion on the text before  point,  treating
              it as a shell variable.
         possible-variable-completions (C-x $)
              List the possible completions of the text before point,
              treating it as a shell variable.
         complete-hostname (M-@)
              Attempt completion on the text before  point,  treating
              it as a hostname.
         possible-hostname-completions (C-x @)
              List the possible completions of the text before point,
              treating it as a hostname.
         complete-command (M-!)
              Attempt completion on the text before  point,  treating
              it  as  a command name.  Command completion attempts to
              match the text against aliases, reserved  words,  shell
              functions,   shell  builtins,  and  finally  executable
              filenames, in that order.
         possible-command-completions (C-x !)
              List the possible completions of the text before point,
              treating it as a command name.
         dynamic-complete-history (M-TAB)
              Attempt completion on the text before point,  comparing
              the text against lines from the history list for possi-
              ble completion matches.
         complete-into-braces (M-{)
              Perform filename completion and return the list of pos-
              sible completions enclosed within braces so the list is
              available to the shell (see Brace Expansion above).
    
      Keyboard Macros
         start-kbd-macro (C-x ()
              Begin saving the characters typed into the current key-
              board macro.
    
         end-kbd-macro (C-x ))
              Stop saving the characters typed into the current  key-
              board macro and store the definition.
         call-last-kbd-macro (C-x e)
              Re-execute the last keyboard macro defined,  by  making
              the  characters  in the macro appear as if typed at the
              keyboard.
    
      Miscellaneous
         re-read-init-file (C-x C-r)
              Read in the contents of the inputrc  file,  and  incor-
              porate  any  bindings  or  variable  assignments  found
              there.
         abort (C-g)
              Abort  the  current  editing  command  and   ring   the
              terminal's bell (subject to the setting of bell-style).
         do-uppercase-version (M-a, M-b, M-x, ...)
              If the metafied character x is lowercase, run the  com-
              mand that is bound to the corresponding uppercase char-
              acter.
         prefix-meta (ESC)
              Metafy the next character typed.  ESC f  is  equivalent
              to Meta-f.
         undo (C-_, C-x C-u)
              Incremental undo, separately remembered for each line.
         revert-line (M-r)
              Undo all changes made to this line.  This is like  exe-
              cuting the undo command enough times to return the line
              to its initial state.
         tilde-expand (M-&)
              Perform tilde expansion on the current word.
         set-mark (C-@, M-<space>)
              Set the mark to the current point.  If a numeric  argu-
              ment is supplied, the mark is set to that position.
         exchange-point-and-mark (C-x C-x)
              Swap the point with the mark.  The current cursor posi-
              tion  is  set to the saved position, and the old cursor
              position is saved as the mark.
         character-search (C-])
              A character is read and point  is  moved  to  the  next
              occurrence   of   that  character.   A  negative  count
              searches for previous occurrences.
         character-search-backward (M-C-])
              A character is read and point is moved to the  previous
              occurrence   of   that  character.   A  negative  count
              searches for subsequent occurrences.
         insert-comment (M-#)
              The value of the  readline  comment-begin  variable  is
              inserted  at the beginning of the current line, and the
              line is accepted as if a newline had been typed.   This
              makes the current line a shell comment.
         glob-expand-word (C-x *)
              The word before point is treated as a pattern for path-
              name  expansion, and the list of matching file names is
              inserted, replacing the word.
         glob-list-expansions (C-x g)
              The list of expansions that would have  been  generated
              by  glob-expand-word  is  displayed,  and  the  line is
              redrawn.
         dump-functions
              Print all of the functions and their  key  bindings  to
              the  readline  output stream.  If a numeric argument is
              supplied, the output is formatted in such a way that it
              can be made part of an inputrc file.
         dump-variables
              Print all of the settable readline variables and  their
              values  to  the  readline  output stream.  If a numeric
              argument is supplied, the output is formatted in such a
              way that it can be made part of an inputrc file.
         dump-macros
              Print all of the readline key sequences bound to macros
              and  the  strings they ouput.  If a numeric argument is
              supplied, the output is formatted in such a way that it
              can be made part of an inputrc file.
         display-shell-version (C-x C-v)
              Display version information about the current  instance
              of bash.
    
    HISTORY
         When the -o history option to the set  builtin  is  enabled,
         the  shell  provides access to the command history, the list
         of commands previously typed.  The text of the last HISTSIZE
         commands  (default  500)  is  saved  in a history list.  The
         shell stores each command  in  the  history  list  prior  to
         parameter  and  variable expansion (see EXPANSION above) but
         after history expansion is performed, subject to the  values
         of  the  shell  variables  HISTIGNORE  and  HISTCONTROL.  On
         startup, the history is initialized from the file  named  by
         the  variable  HISTFILE (default ~/.bash_history).  HISTFILE
         is truncated, if necessary, to contain no  more  than  HIST-
         FILESIZE  lines.   When an interactive shell exits, the last
         HISTSIZE lines are copied from the history list to HISTFILE.
         If  the histappend shell option is enabled (see the descrip-
         tion of shopt under SHELL BUILTIN COMMANDS below), the lines
         are appended to the history file, otherwise the history file
         is overwritten.  If HISTFILE is unset,  or  if  the  history
         file  is unwritable, the history is not saved.  After saving
         the history, the history file is  truncated  to  contain  no
         more  than  HISTFILESIZE lines.  If HISTFILESIZE is not set,
         no truncation is performed.
    
         The builtin command fc (see SHELL  BUILTIN  COMMANDS  below)
         may  be used to list or edit and re-execute a portion of the
         history list.  The history builtin can be used to display or
         modify  the  history  list  and manipulate the history file.
         When using the command-line  editing,  search  commands  are
         available  in  each  editing mode that provide access to the
         history list.
    
         The shell allows control over which commands  are  saved  on
         the  history list.  The HISTCONTROL and HISTIGNORE variables
         may be set to cause the shell to save only a subset  of  the
         commands  entered.   The  cmdhist  shell option, if enabled,
         causes the shell to attempt to save each line  of  a  multi-
         line  command  in  the same history entry, adding semicolons
         where necessary  to  preserve  syntactic  correctness.   The
         lithist  shell  option  causes the shell to save the command
         with embedded  newlines  instead  of  semicolons.   See  the
         description  of  the shopt builtin below under SHELL BUILTIN
         COMMANDS for information  on  setting  and  unsetting  shell
         options.
    
    HISTORY EXPANSION
         The shell supports a history expansion feature that is simi-
         lar to the history expansion in csh.  This section describes
         what syntax features are available.  This feature is enabled
         by default for interactive shells, and can be disabled using
         the +H option to the set builtin command (see SHELL  BUILTIN
         COMMANDS below).  Non-interactive shells do not perform his-
         tory expansion by default.
    
         History expansions introduce words  from  the  history  list
         into  the  input  stream, making it easy to repeat commands,
         insert the arguments to a previous command into the  current
         input line, or fix errors in previous commands quickly.
    
         History expansion is performed immediately after a  complete
         line  is  read,  before  the shell breaks it into words.  It
         takes place in two parts.  The first is to  determine  which
         line  from the history list to use during substitution.  The
         second is to select portions of that line for inclusion into
         the  current one.  The line selected from the history is the
         event, and the portions of that line that are acted upon are
         words.   Various  modifiers  are available to manipulate the
         selected words.  The line is broken into words in  the  same
         fashion   as   when   reading   input,   so   that   several
         metacharacter-separated words surrounded by quotes are  con-
         sidered  one word.  History expansions are introduced by the
         appearance of the history expansion character, which is ! by
         default.  Only backslash (\) and single quotes can quote the
         history expansion character.
    
         Several shell options settable with the shopt builtin may be
         used  to  tailor  the behavior of history expansion.  If the
         histverify shell option is enabled (see the  description  of
         the  shopt  builtin),  and  readline  is being used, history
         substitutions  are  not  immediately  passed  to  the  shell
         parser.   Instead,  the  expanded  line is reloaded into the
         readline editing buffer for further modification.  If  read-
         line  is  being  used,  and  the  histreedit shell option is
         enabled, a failed history substitution will be reloaded into
         the  readline  editing buffer for correction.  The -p option
         to the history builtin command may be used  to  see  what  a
         history expansion will do before using it.  The -s option to
         the history builtin may be used to add commands to  the  end
         of the history list without actually executing them, so that
         they are available for subsequent recall.
    
         The shell allows control of the various characters  used  by
         the  history  expansion  mechanism  (see  the description of
         histchars above under Shell Variables).
    
      Event Designators
         An event designator is a reference to a command  line  entry
         in the history list.
    
         !    Start a history substitution, except when followed by a
              blank, newline, = or (.
         !n   Refer to command line n.
         !-n  Refer to the current command line minus n.
         !!   Refer to the previous command.  This is a  synonym  for
              `!-1'.
         !string
              Refer to the most recent command starting with string.
         !?string[?]
              Refer to the most  recent  command  containing  string.
              The  trailing  ?  may  be omitted if string is followed
              immediately by a newline.
         ^string1^string2^
              Quick substitution.  Repeat the last command, replacing
              string1      with      string2.       Equivalent     to
              ``!!:s/string1/string2/'' (see Modifiers below).
         !#   The entire command line typed so far.
    
      Word Designators
         Word designators are used to select desired words  from  the
         event.   A : separates the event specification from the word
         designator.  It may be omitted if the word designator begins
         with a ^, $, *, -, or %.  Words are numbered from the begin-
         ning of the line, with the first word  being  denoted  by  0
         (zero).   Words are inserted into the current line separated
         by single spaces.
    
         0 (zero)
              The zeroth word.  For the shell, this  is  the  command
              word.
         n    The nth word.
         ^    The first argument.  That is, word 1.
         $    The last argument.
         %    The word matched by the most recent `?string?' search.
         x-y  A range of words; `-y' abbreviates `0-y'.
         *    All of the words but the zeroth.  This is a synonym for
              `1-$'.   It  is  not an error to use * if there is just
              one word in the event; the empty string is returned  in
              that case.
         x*   Abbreviates x-$.
         x-   Abbreviates x-$ like x*, but omits the last word.
    
         If a word designator is supplied without an event specifica-
         tion, the previous command is used as the event.
    
      Modifiers
         After the optional  word  designator,  there  may  appear  a
         sequence  of  one  or  more of the following modifiers, each
         preceded by a `:'.
    
         h    Remove a trailing file name component, leaving only the
              head.
         t    Remove all leading file name  components,  leaving  the
              tail.
         r    Remove a trailing suffix of the form .xxx, leaving  the
              basename.
         e    Remove all but the trailing suffix.
         p    Print the new command but do not execute it.
         q    Quote the substituted words, escaping further substitu-
              tions.
         x    Quote the substituted words as with q, but  break  into
              words at blanks and newlines.
         s/old/new/
              Substitute new for the first occurrence of old  in  the
              event  line.   Any delimiter can be used in place of /.
              The final delimiter is optional if it is the last char-
              acter  of  the event line.  The delimiter may be quoted
              in old and new with a single backslash.  If  &  appears
              in new, it is replaced by old.  A single backslash will
              quote the &.  If old is null, it is set to the last old
              substituted,  or,  if no previous history substitutions
              took place, the last string in a !?string[?] search.
         &    Repeat the previous substitution.
         g    Cause changes to be applied over the entire event line.
              This   is   used   in   conjunction  with  `:s'  (e.g.,
              `:gs/old/new/') or `:&'.  If used with `:s', any delim-
              iter can be used in place of /, and the final delimiter
              is optional if it is the last character  of  the  event
              line.
    
    SHELL BUILTIN COMMANDS
         Unless otherwise noted, each builtin command  documented  in
         this  section  as accepting options preceded by - accepts --
         to signify the end of the options.
         : [arguments]
              No effect; the command does  nothing  beyond  expanding
              arguments and performing any specified redirections.  A
              zero exit code is returned.
    
          .  filename [arguments]
         source filename [arguments]
              Read and execute commands from filename in the  current
              shell  environment  and  return  the exit status of the
              last command executed from filename.  If filename  does
              not  contain  a  slash,  file names in PATH are used to
              find  the  directory  containing  filename.   The  file
              searched  for  in  PATH  need  not  be executable.  The
              current directory is searched if no file  is  found  in
              PATH.   If  the  sourcepath option to the shopt builtin
              command is turned off, the PATH is  not  searched.   If
              any  arguments are supplied, they become the positional
              parameters when filename is  executed.   Otherwise  the
              positional parameters are unchanged.  The return status
              is the status of the last  command  exited  within  the
              script  (0  if  no commands are executed), and false if
              filename is not found or cannot be read.
    
         alias [-p] [name[=value] ...]
              Alias with no arguments or with the  -p  option  prints
              the  list  of  aliases  in the form alias name=value on
              standard output.  When arguments are supplied, an alias
              is  defined  for  each  name  whose  value is given.  A
              trailing space in  value causes the  next  word  to  be
              checked  for  alias  substitution  when  the  alias  is
              expanded.  For each name in the argument list for which
              no  value  is supplied, the name and value of the alias
              is printed.  Alias returns true unless a name is  given
              for which no alias has been defined.
    
         bg [jobspec]
              Resume the suspended job jobspec in the background,  as
              if  it  had  been  started  with  &.  If jobspec is not
              present, the shell's notion of the current job is used.
              bg  jobspec  returns  0  unless run when job control is
              disabled or, when run with job control enabled, if job-
              spec was not found or started without job control.
    
         bind [-m keymap] [-lpsvPSV]
         bind [-m keymap] [-q function] [-u function] [-r keyseq]
         bind [-m keymap] -f filename
         bind [-m keymap] keyseq:function-name
              Display current readline key and function bindings,  or
              bind  a  key  sequence to a readline function or macro.
              The binding syntax accepted is  identical  to  that  of
              .inputrc, but each binding must be passed as a separate
              argument;   e.g.,   '"\C-x\C-r":    re-read-init-file'.
              Options, if supplied, have the following meanings:
              -m keymap
                   Use keymap as the keymap to  be  affected  by  the
                   subsequent  bindings.  Acceptable keymap names are
                   emacs, emacs-standard, emacs-meta, emacs-ctlx, vi,
                   vi-command,  and  vi-insert.   vi is equivalent to
                   vi-command; emacs is equivalent to emacs-standard.
              -l   List the names of all readline functions.
              -p   Display readline function names  and  bindings  in
                   such a way that they can be re-read.
              -P   List current readline function names and bindings.
              -v   Display readline variable names and values in such
                   a way that they can be re-read.
              -V   List current readline variable names and values.
              -s   Display readline key sequences bound to macros and
                   the  strings  they  output in such a way that they
                   can be re-read.
              -S   Display readline key sequences bound to macros and
                   the strings they output.
              -f filename
                   Read key bindings from filename.
              -q function
                   Query about which keys invoke the named function.
              -u function
                   Unbind all keys bound to the named function.
              -r keyseq
                   Remove any current binding for keyseq.
    
              The return value is 0 unless an unrecognized option  is
              given or an error occurred.
    
         break [n]
              Exit from within a for, while, until, or  select  loop.
              If  n is specified, break n levels.  n must be > 1.  If
              n is greater than the number of  enclosing  loops,  all
              enclosing  loops  are  exited.   The  return value is 0
              unless the shell is not executing a loop when break  is
              executed.
    
         builtin shell-builtin [arguments]
              Execute the specified shell builtin, passing  it  argu-
              ments, and return its exit status.  This is useful when
              defining a function whose name is the same as  a  shell
              builtin,  retaining  the  functionality  of the builtin
              within the function.  The cd builtin is commonly  rede-
              fined   this  way.   The  return  status  is  false  if
              shell-builtin is not a shell builtin command.
    
         cd [-LP] [dir]
              Change the current directory to dir.  The variable HOME
              is  the  default  dir.  The variable CDPATH defines the
              search  path  for   the   directory   containing   dir.
              Alternative  directory names in CDPATH are separated by
              a colon (:).  A null directory name in  CDPATH  is  the
              same  as  the  current  directory, i.e., ``.''.  If dir
              begins with a slash (/), then CDPATH is not  used.  The
              -P  option says to use the physical directory structure
              instead of following symbolic links (see  also  the  -P
              option  to  the  set  builtin  command);  the -L option
              forces symbolic links to be followed.  An argument of -
              is  equivalent to $OLDPWD.  The return value is true if
              the directory was successfully  changed;  false  other-
              wise.
    
         command [-pVv] command [arg ...]
              Run command with  args  suppressing  the  normal  shell
              function  lookup.  Only  builtin  commands  or commands
              found in the PATH are executed.  If the  -p  option  is
              given,  the  search  for  command  is performed using a
              default value for PATH that is guaranteed to  find  all
              of  the  standard  utilities.   If  either the -V or -v
              option  is  supplied,  a  description  of  command   is
              printed.  The -v option causes a single word indicating
              the command or file name used to invoke command  to  be
              displayed;  the  -V  option  produces  a  more  verbose
              description.  If the -V or -v option is  supplied,  the
              exit  status  is  0 if command was found, and 1 if not.
              If neither option is supplied and an error occurred  or
              command  cannot be found, the exit status is 127.  Oth-
              erwise, the exit status of the command builtin  is  the
              exit status of command.
    
         continue [n]
              Resume the next iteration of the enclosing for,  while,
              until,  or  select  loop.  If n is specified, resume at
              the nth enclosing loop.  n  must  be  >  1.   If  n  is
              greater  than  the  number of enclosing loops, the last
              enclosing loop (the  ``top-level''  loop)  is  resumed.
              The return value is 0 unless the shell is not executing
              a loop when continue is executed.
    
         declare [-afFirx] [-p] [name[=value]]
         typeset [-afFirx] [-p] [name[=value]]
              Declare variables and/or give them attributes.   If  no
              names  are  given then display the values of variables.
              The -p option will display the attributes and values of
              each  name.   When  -p  is used, additional options are
              ignored.  The -F option inhibits the display  of  func-
              tion definitions; only the function name and attributes
              are printed.  The -F option implies -f.  The  following
              options  can  be  used  to restrict output to variables
              with the  specified  attribute  or  to  give  variables
              attributes:
              -a   Each name is an array variable (see Arrays above).
              -f   Use function names only.
              -i   The variable is treated as an integer;  arithmetic
                   evaluation  (see  ARITHMETIC  EVALUATION ) is per-
                   formed when the variable is assigned a value.
              -r   Make names readonly.  These names cannot  then  be
                   assigned  values  by  subsequent assignment state-
                   ments or unset.
              -x   Mark names for export to subsequent  commands  via
                   the environment.
    
              Using `+'  instead  of  `-'  turns  off  the  attribute
              instead,  with the exception that +a may not be used to
              destroy an array variable.  When used  in  a  function,
              makes  each name local, as with the local command.  The
              return value is 0 unless an invalid option  is  encoun-
              tered,  an  attempt  is made to define a function using
              "-f foo=bar", an attempt is made to assign a value to a
              readonly variable, an attempt is made to assign a value
              to an array variable without using the compound assign-
              ment syntax (see Arrays above), one of the names is not
              a valid shell variable name, an attempt is made to turn
              off readonly status for a readonly variable, an attempt
              is made to turn off array status for an array variable,
              or  an  attempt is made to display a non-existent func-
              tion with -f.
    
         dirs [-clpv] [+n] [-n]
              Without options, displays the list of currently  remem-
              bered  directories.  The default display is on a single
              line with directory names separated by spaces.   Direc-
              tories  are  added  to the list with the pushd command;
              the popd command removes entries from the list.
              +n   Displays the nth entry counting from the  left  of
                   the  list  shown  by  dirs  when  invoked  without
                   options, starting with zero.
              -n   Displays the nth entry counting from the right  of
                   the  list  shown  by  dirs  when  invoked  without
                   options, starting with zero.
              -c   Clears the directory stack by deleting all of  the
                   entries.
              -l   Produces a longer  listing;  the  default  listing
                   format uses a tilde to denote the home directory.
              -p   Print the directory stack with one entry per line.
              -v   Print the directory stack with one entry per line,
                   prefixing each entry with its index in the stack.
    
              The return value is 0 unless an invalid option is  sup-
              plied  or  n  indexes  beyond  the end of the directory
              stack.
    
         disown [-ar] [-h] [jobspec ...]
              Without options, each jobspec is removed from the table
              of  active  jobs.  If the -h option is given, each job-
              spec is not removed from the table, but  is  marked  so
              that  SIGHUP  is  not  sent  to  the  job  if the shell
              receives a SIGHUP.  If no jobspec is present, and  nei-
              ther  the -a nor the -r option is supplied, the current
              job is used.  If no jobspec is supplied, the -a  option
              means to remove or mark all jobs; the -r option without
              a jobspec argument restricts operation to running jobs.
              The return value is 0 unless a jobspec does not specify
              a valid job.
    
         echo [-neE] [arg ...]
              Output the args, separated by  spaces,  followed  by  a
              newline.   The  return  status  is  always 0.  If -n is
              specified, the trailing newline is suppressed.  If  the
              -e  option  is  given,  interpretation of the following
              backslash-escaped characters is enabled.  The -E option
              disables the interpretation of these escape characters,
              even on systems where they are interpreted by  default.
              echo  does not interpret -- to mean the end of options.
              echo interprets the following escape sequences:
              \a   alert (bell)
              \b   backspace
              \c   suppress trailing newline
              \e   an escape character
              \f   form feed
              \n   new line
              \r   carriage return
              \t   horizontal tab
              \v   vertical tab
              \\   backslash
              \nnn the character whose ASCII code is the octal  value
                   nnn (one to three digits)
              \xnnn
                   the character whose ASCII code is the  hexadecimal
                   value nnn (one to three digits)
    
         enable [-adnps] [-f filename] [name ...]
              Enable and disable builtin shell commands.  Disabling a
              builtin  allows  a disk command which has the same name
              as a shell builtin to be  executed  with  specifying  a
              full  pathname, even though the shell normally searches
              for builtins before disk commands.  If -n is used, each
              name  is  disabled;  otherwise, names are enabled.  For
              example, to use the test  binary  found  via  the  PATH
              instead  of  the  shell  builtin version, run enable -n
              test.  The -f option means to load the new builtin com-
              mand  name from shared object filename, on systems that
              support dynamic loading.  The -d option will  delete  a
              builtin  previously  loaded  with -f.  If no name argu-
              ments are given, or if the -p  option  is  supplied,  a
              list  of  shell  builtins  is  printed.   With no other
              option arguments, the  list  consists  of  all  enabled
              shell builtins.  If -n is supplied, only disabled buil-
              tins are printed.  If -a is supplied, the list  printed
              includes all builtins, with an indication of whether or
              not each is enabled.  If -s is supplied, the output  is
              restricted  to  the POSIX special builtins.  The return
              value is 0 unless a name is  not  a  shell  builtin  or
              there  is a problem loading a new builtin from a shared
              object.
    
         eval [arg ...]
              The args are read and concatenated together into a sin-
              gle command.  This command is then read and executed by
              the shell, and its exit status is returned as the value
              of eval.  If there are no args, or only null arguments,
              eval returns 0.
    
         exec [-cl] [-a name] [command [arguments]]
              If command is specified, it replaces the shell.  No new
              process is created.  The arguments become the arguments
              to command.  If the -l option is  supplied,  the  shell
              places  a  dash  in  the  zeroth arg passed to command.
              This is what login(1) does.  The -c option causes  com-
              mand  to  be executed with an empty environment.  If -a
              is supplied, the shell passes name as the zeroth  argu-
              ment  to  the  executed  command.  If command cannot be
              executed  for  some  reason,  a  non-interactive  shell
              exits,  unless the shell option execfail is enabled, in
              which case it returns failure.   An  interactive  shell
              returns  failure  if  the  file cannot be executed.  If
              command is not specified, any redirections take  effect
              in  the  current shell, and the return status is 0.  If
              there is a redirection error, the return status is 1.
    
         exit [n]
              Cause the shell to exit with a status of n.   If  n  is
              omitted,  the  exit  status is that of the last command
              executed.  A trap on EXIT is executed before the  shell
              terminates.
    
         export [-fn] [name[=word]] ...
         export -p
              The supplied names are marked for automatic  export  to
              the  environment of subsequently executed commands.  If
              the -f option is given, the names refer  to  functions.
              If no names are given, or if the -p option is supplied,
              a list of all names that are exported in this shell  is
              printed.   The  -n option causes the export property to
              be removed from the named variables.  export returns an
              exit  status  of  0 unless an invalid option is encoun-
              tered, one of the names is not a valid  shell  variable
              name,  or  -f  is  supplied  with  a name that is not a
              function.
    
         fc [-e ename] [-nlr] [first] [last]
         fc -s [pat=rep] [cmd]
              Fix Command.  In the first form, a  range  of  commands
              from  first  to last is selected from the history list.
              First and last may be specified as a string (to  locate
              the  last  command  beginning with that string) or as a
              number (an index into the history list, where  a  nega-
              tive  number is used as an offset from the current com-
              mand number).  If last is not specified it  is  set  to
              the  current  command  for  listing  (so that fc -l -10
              prints the last 10 commands) and  to  first  otherwise.
              If  first  is  not  specified it is set to the previous
              command for editing and -16 for listing.
    
              The -n option suppresses the command numbers when list-
              ing.  The -r option reverses the order of the commands.
              If the -l option is given, the commands are  listed  on
              standard  output.  Otherwise, the editor given by ename
              is invoked on a file  containing  those  commands.   If
              ename is not given, the value of the FCEDIT variable is
              used, and the value of EDITOR if FCEDIT is not set.  If
              neither  variable  is set, vi is used.  When editing is
              complete, the edited commands are echoed and executed.
    
              In the second form, command is re-executed  after  each
              instance  of pat is replaced by rep.  A useful alias to
              use with this is ``r=fc -s'', so that typing  ``r  cc''
              runs  the last command beginning with ``cc'' and typing
              ``r'' re-executes the last command.
    
              If the first form is used, the return value is 0 unless
              an  invalid  option  is  encountered  or  first or last
              specify history lines out of range.  If the  -e  option
              is  supplied, the return value is the value of the last
              command executed or failure if an error occurs with the
              temporary  file  of  commands.   If  the second form is
              used, the return status is  that  of  the  command  re-
              executed,  unless  cmd does not specify a valid history
              line, in which case fc returns failure.
    
         fg [jobspec]
              Resume jobspec in  the  foreground,  and  make  it  the
              current  job.   If  jobspec is not present, the shell's
              notion of the current job is used.  The return value is
              that  of  the  command  placed  into the foreground, or
              failure if run when job control is  disabled  or,  when
              run  with  job  control  enabled,  if  jobspec does not
              specify a valid job or jobspec specifies a job that was
              started without job control.
    
         getopts optstring name [args]
              getopts is used by shell procedures to parse positional
              parameters.   optstring  contains the option letters to
              be recognized; if a letter is followed by a colon,  the
              option is expected to have an argument, which should be
              separated from it by white  space.   Each  time  it  is
              invoked,  getopts  places  the next option in the shell
              variable name, initializing name if it does not  exist,
              and the index of the next argument to be processed into
              the variable OPTIND.  OPTIND is initialized to  1  each
              time  the  shell or a shell script is invoked.  When an
              option requires an argument, getopts places that  argu-
              ment  into  the  variable  OPTARG.   The shell does not
              reset OPTIND automatically; it must be  manually  reset
              between multiple calls to getopts within the same shell
              invocation if a new set of parameters is to be used.
    
              When the end of options is encountered,  getopts  exits
              with  a  return value greater than zero.  OPTIND is set
              to the index of the first non-option argument, and name
              is set to ?.
    
              getopts normally parses the positional parameters,  but
              if  more  arguments  are  given in args, getopts parses
              those instead.
    
              getopts can report errors in two ways.   If  the  first
              character of optstring is a colon, silent error report-
              ing is used.  In normal operation  diagnostic  messages
              are  printed  when  invalid  options  or missing option
              arguments are encountered.  If the variable  OPTERR  is
              set  to 0, no error messages will be displayed, even if
              the first character of optstring is not a colon.
    
              If an invalid option is seen,  getopts  places  ?  into
              name  and,  if  not silent, prints an error message and
              unsets OPTARG.  If getopts is silent, the option  char-
              acter  found is placed in OPTARG and no diagnostic mes-
              sage is printed.
    
              If a required argument is not found, and getopts is not
              silent,  a  question mark (?) is placed in name, OPTARG
              is unset, and a  diagnostic  message  is  printed.   If
              getopts  is  silent, then a colon (:) is placed in name
              and OPTARG is set to the option character found.
    
              getopts  returns  true  if  an  option,  specified   or
              unspecified,  is found.  It returns false if the end of
              options is encountered or an error occurs.
    
         hash [-r] [-p filename] [name]
              For each name, the full file name  of  the  command  is
              determined  by  searching  the directories in $PATH and
              remembered.  If the -p  option  is  supplied,  no  path
              search  is  performed, and filename is used as the full
              file name of the command.  The  -r  option  causes  the
              shell  to forget all remembered locations.  If no argu-
              ments are given, information about remembered  commands
              is printed.  The return status is true unless a name is
              not found or an invalid option is supplied.
    
         help [pattern]
              Display helpful information about builtin commands.  If
              pattern  is  specified, help gives detailed help on all
              commands matching pattern; otherwise help for  all  the
              builtins  and shell control structures is printed.  The
              return status is 0 unless no command matches pattern.
    
         history [-c] [n]
         history -anrw [filename]
         history -p arg [arg ...]
         history -s arg [arg ...]
              With no options, display the command history list  with
              line  numbers.   Lines  listed with a * have been modi-
              fied.  An argument of n lists only the  last  n  lines.
              If  filename is supplied, it is used as the name of the
              history file; if not, the value of  HISTFILE  is  used.
              Options, if supplied, have the following meanings:
              -a   Append the ``new'' history  lines  (history  lines
                   entered  since  the  beginning of the current bash
                   session) to the history file.
              -n   Read the history lines not already read  from  the
                   history file into the current history list.  These
                   are lines appended to the history file  since  the
                   beginning of the current bash session.
              -r   Read the contents of the history file and use them
                   as the current history.
              -w   Write the current history  to  the  history  file,
                   overwriting the history file's contents.
              -c   Clear  the  history  list  by  deleting  all   the
                   entries.
              -p   Perform history substitution on the following args
                   and  display  the  result  on the standard output.
                   Does not store the results in  the  history  list.
                   Each  arg must be quoted to disable normal history
                   expansion.
              -s   Store the args in the history  list  as  a  single
                   entry.   The  last  command in the history list is
                   removed before the args are added.
    
              The return value is  0  unless  an  invalid  option  is
              encountered or an error occurs while reading or writing
              the history file.
    
         jobs [-lnprs] [ jobspec ... ]
         jobs -x command [ args ... ]
              The first form lists the active jobs.  The options have
              the following meanings:
              -l   List process IDs in addition to the normal  infor-
                   mation.
              -p   List only the process  ID  of  the  job's  process
                   group leader.
              -n   Display information  only  about  jobs  that  have
                   changed status since the user was last notified of
                   their status.
              -r   Restrict output to running jobs.
              -s   Restrict output to stopped jobs.
    
              If jobspec is given, output is restricted  to  informa-
              tion  about that job.  The return status is 0 unless an
              invalid option is encountered or an invalid jobspec  is
              supplied.
    
              If the -x option is supplied, jobs replaces any jobspec
              found in command or args with the corresponding process
              group ID, and executes command passing it args, return-
              ing its exit status.
    
         kill [-s sigspec | -n signum | -sigspec] [pid | jobspec] ...
         kill -l [sigspec | exit_status]
              Send the signal named  by  sigspec  or  signum  to  the
              processes named by pid or jobspec.  sigspec is either a
              signal name such as SIGKILL or a signal number;  signum
              is  a  signal number.  If sigspec is a signal name, the
              name may be given with or without the SIG  prefix.   If
              sigspec  is  not  present, then SIGTERM is assumed.  An
              argument of -l lists the signal names.   If  any  argu-
              ments  are  supplied when -l is given, the names of the
              signals corresponding to the arguments are listed,  and
              the return status is 0.  The exit_status argument to -l
              is a number specifying either a signal  number  or  the
              exit  status of a process terminated by a signal.  kill
              returns true if at least one  signal  was  successfully
              sent,  or false if an error occurs or an invalid option
              is encountered.
    
         let arg [arg ...]
              Each arg is an arithmetic expression  to  be  evaluated
              (see ARITHMETIC EVALUATION).  If the last arg evaluates
              to 0, let returns 1; 0 is returned otherwise.
    
         local [name[=value] ...]
              For each argument,  a  local  variable  named  name  is
              created, and assigned value.  When local is used within
              a function, it causes the variable name to have a visi-
              ble scope restricted to that function and its children.
              With no operands, local writes a list  of  local  vari-
              ables  to  the  standard output.  It is an error to use
              local when not within a function.  The return status is
              0  unless  local  is  used  outside  a  function, or an
              invalid name is supplied.
    
         logout
              Exit a login shell.
    
         popd [-n] [+n] [-n]
              Removes entries from  the  directory  stack.   With  no
              arguments,  removes  the  top directory from the stack,
              and performs a cd to the new top directory.  Arguments,
              if supplied, have the following meanings:
              +n   Removes the nth entry counting from  the  left  of
                   the  list  shown by dirs, starting with zero.  For
                   example: ``popd +0'' removes the first  directory,
                   ``popd +1'' the second.
              -n   Removes the nth entry counting from the  right  of
                   the  list  shown by dirs, starting with zero.  For
                   example: ``popd -0'' removes the  last  directory,
                   ``popd -1'' the next to last.
              -n   Suppresses the normal  change  of  directory  when
                   removing  directories from the stack, so that only
                   the stack is manipulated.
    
              If the popd command is successful, a dirs is  performed
              as  well,  and  the  return  status is 0.  popd returns
              false if an invalid option is encountered,  the  direc-
              tory  stack  is  empty,  a non-existent directory stack
              entry is specified, or the directory change fails.
    
         printf format [arguments]
              Write the formatted arguments to  the  standard  output
              under the control of the format.  The format is a char-
              acter string which contains  three  types  of  objects:
              plain  characters,  which are simply copied to standard
              output, character escape sequences, which are converted
              and  copied to the standard output, and format specifi-
              cations, each of which causes printing of the next suc-
              cessive   argument.    In   addition  to  the  standard
              printf(1) formats, %b causes printf to expand backslash
              escape  sequences in the corresponding argument, and %q
              causes printf to output the corresponding argument in a
              format that can be reused as shell input.
    
              The format is reused as necessary to consume all of the
              arguments.   If the format requires more arguments than
              are supplied, the extra format specifications behave as
              if  a  zero  value  or null string, as appropriate, had
              been supplied.
    
         pushd [-n] [dir]
         pushd [-n] [+n] [-n]
              Adds a directory to the top of the directory stack,  or
              rotates  the stack, making the new top of the stack the
              current  working   directory.    With   no   arguments,
              exchanges the top two directories and returns 0, unless
              the directory stack is empty.  Arguments, if  supplied,
              have the following meanings:
              +n   Rotates  the  stack  so  that  the  nth  directory
                   (counting from the left of the list shown by dirs,
                   starting with zero) is at the top.
              -n   Rotates  the  stack  so  that  the  nth  directory
                   (counting  from  the  right  of  the list shown by
                   dirs, starting with zero) is at the top.
              -n   Suppresses the normal  change  of  directory  when
                   adding  directories to the stack, so that only the
                   stack is manipulated.
              dir  Adds dir to the directory stack at the top, making
                   it the new current working directory.
    
              If the pushd command is successful, a dirs is performed
              as  well.   If  the first form is used, pushd returns 0
              unless the cd to dir  fails.   With  the  second  form,
              pushd  returns 0 unless the directory stack is empty, a
              non-existent directory stack element is  specified,  or
              the  directory  change  to  the  specified  new current
              directory fails.
    
         pwd [-LP]
              Print the absolute file name  of  the  current  working
              directory.   The file name printed contains no symbolic
              links if the -P option is supplied or the  -o  physical
              option  to  the set builtin command is enabled.  If the
              -L option is used, symbolic links  are  followed.   The
              return status is 0 unless an error occurs while reading
              the name of the current directory or an invalid  option
              is supplied.
    
         read [-er] [-a aname] [-p prompt] [name ...]
              One line is read from the standard input, and the first
              word  is assigned to the first name, the second word to
              the second name, and so on,  with  leftover  words  and
              their intervening separators assigned to the last name.
              If there are fewer words read from the  standard  input
              than  names,  the  remaining  names  are assigned empty
              values.  The characters in IFS are used  to  split  the
              line  into  words.   The backslash character (\) may be
              used to remove any special meaning for the next charac-
              ter  read  and for line continuation.  Options, if sup-
              plied, have the following meanings:
              -r   Backslash does not act  as  an  escape  character.
                   The  backslash  is  considered  to  be part of the
                   line.  In particular, a backslash-newline pair may
                   not be used as a line continuation.
              -p   Display prompt, without a trailing newline, before
                   attempting  to  read  any  input.   The  prompt is
                   displayed only if input is coming from a terminal.
              -a   The words are assigned to  sequential  indices  of
                   the array variable aname, starting at 0.  aname is
                   unset before any new values are  assigned.   Other
                   name arguments are ignored.
              -e   If the standard input is coming from  a  terminal,
                   readline  (see  READLINE  above) is used to obtain
                   the line.
    
              If no names are supplied, the line read is assigned  to
              the  variable  REPLY.   The return code is zero, unless
              end-of-file is encountered.
    
         readonly [-apf] [name ...]
              The given names are  marked  readonly;  the  values  of
              these  names  may  not be changed by subsequent assign-
              ment.  If the -f  option  is  supplied,  the  functions
              corresponding  to  the  names  are  so  marked.  The -a
              option restricts the variables to arrays.  If  no  name
              arguments are given, or if the -p option is supplied, a
              list of all readonly names is printed.  The  -p  option
              causes  output  to  be displayed in a format thatmay be
              reused as input.  The return  status  is  0  unless  an
              invalid  option is encountered, one of the names is not
              a valid shell variable name, or -f is supplied  with  a
              name that is not a function.
    
         return [n]
              Causes a function to exit with the return value  speci-
              fied  by n.  If n is omitted, the return status is that
              of the last command executed in the function body.   If
              used  outside  a  function,  but  during execution of a
              script by the . (source) command, it causes  the  shell
              to  stop  executing  that script and return either n or
              the exit status of the last command executed within the
              script  as the exit status of the script.  If used out-
              side a function and not during execution of a script by
              ., the return status is false.
    
         set [--abefhkmnptuvxBCHP] [-o option] [arg ...]
              Without options, the name and value of each shell vari-
              able  are  displayed  in a format that can be reused as
              input.  The output is sorted according to  the  current
              locale.   When options are specified, they set or unset
              shell attributes.  Any arguments  remaining  after  the
              options  are  processed  are  treated as values for the
              positional parameters and are assigned,  in  order,  to
              $1,  $2,  ...  $n.   Options,  if  specified,  have the
              following meanings:
              -a      Automatically mark variables which are modified
                      or  created  for  export  to the environment of
                      subsequent commands.
              -b      Report the status of terminated background jobs
                      immediately,  rather  than before the next pri-
                      mary prompt.  This is effective only  when  job
                      control is enabled.
              -e      Exit immediately if a simple command (see SHELL
                      GRAMMAR  above)  exits  with a non-zero status.
                      The shell does not exit  if  the  command  that
                      fails  is  part of an until or while loop, part
                      of an if statement, part of a && or || list, or
                      if the command's return value is being inverted
                      via !.
              -f      Disable pathname expansion.
              -h      Remember the location of commands as  they  are
                      looked  up  for  execution.  This is enabled by
                      default.
              -k      All arguments in the form of assignment  state-
                      ments  are placed in the environment for a com-
                      mand, not just those that precede  the  command
                      name.
              -m      Monitor mode.  Job control  is  enabled.   This
                      option  is on by default for interactive shells
                      on systems that support  it  (see  JOB  CONTROL
                      above).  Background processes run in a separate
                      process group and a line containing their  exit
                      status is printed upon their completion.
              -n      Read commands but do not  execute  them.   This
                      may  be used to check a shell script for syntax
                      errors.  This is ignored by interactive shells.
              -o option-name
                      The option-name can be one of the following:
                      allexport
                              Same as -a.
                      braceexpand
                              Same as -B.
                      emacs   Use an emacs-style command line editing
                              interface.   This is enabled by default
                              when the shell is  interactive,  unless
                              the shell is started with the --noedit-
                              ing option.
                      errexit Same as -e.
                      hashall Same as -h.
                      histexpand
                              Same as -H.
                      history Enable command  history,  as  described
                              above under HISTORY.  This option is on
                              by default in interactive shells.
                      ignoreeof
                              The effect is as if the  shell  command
                              IGNOREEOF=10  had  been  executed  (see
                              Shell Variables above).
                      keyword Same as -k.
                      monitor Same as -m.
                      noclobber
                              Same as -C.
                      noexec  Same as -n.
                      noglob  Same as -f.
                      notify  Same as -b.
                      nounset Same as -u.
                      onecmd  Same as -t.
                      physical
                              Same as -P.
                      posix   Change the behavior of bash  where  the
                              default   operation  differs  from  the
                              POSIX  1003.2  standard  to  match  the
                              standard.
                      privileged
                              Same as -p.
                      verbose Same as -v.
                      vi      Use a  vi-style  command  line  editing
                              interface.
                      xtrace  Same as -x.
                      If -o is  supplied  with  no  option-name,  the
                      values  of the current options are printed.  If
                      +o is supplied with no option-name, a series of
                      set  commands  to  recreate  the current option
                      settings is displayed on the standard output.
              -p      Turn on privileged mode.   In  this  mode,  the
                      $ENV  and  $BASH_ENV  files  are not processed,
                      shell functions  are  not  inherited  from  the
                      environment,  and the SHELLOPTS variable, if it
                      appears in the environment, is ignored.  If the
                      shell   is  started  with  the  effective  user
                      (group) id not equal to the real  user  (group)
                      id,  and  the  -p option is not supplied, these
                      actions are taken and the effective user id  is
                      set  to  the real user id.  If the -p option is
                      supplied at startup, the effective user  id  is
                      not  reset.  Turning this option off causes the
                      effective user and group ids to be set  to  the
                      real user and group ids.
              -t      Exit after reading and executing one command.
              -u      Treat unset variables as an error when perform-
                      ing   parameter  expansion.   If  expansion  is
                      attempted  on  an  unset  variable,  the  shell
                      prints  an  error message, and, if not interac-
                      tive, exits with a non-zero status.
              -v      Print shell input lines as they are read.
              -x      After expanding each  simple  command,  display
                      the expanded value of PS4, followed by the com-
                      mand and its expanded arguments.
    
              -B      The shell performs brace expansion  (see  Brace
                      Expansion above).  This is on by default.
              -C      If set, bash does  not  overwrite  an  existing
                      file  with the >, >&, and <> redirection opera-
                      tors.  This may  be  overridden  when  creating
                      output  files by using the redirection operator
                      >| instead of >.
              -H      Enable  !  style  history  substitution.   This
                      option  is  on  by  default  when  the shell is
                      interactive.
              -P      If set, the  shell  does  not  follow  symbolic
                      links  when  executing commands such as cd that
                      change the current working directory.  It  uses
                      the  physical  directory structure instead.  By
                      default, bash  follows  the  logical  chain  of
                      directories   when  performing  commands  which
                      change the current directory.
              --      If no arguments follow this  option,  then  the
                      positional  parameters  are  unset.  Otherwise,
                      the positional parameters are set to the  args,
                      even if some of them begin with a -.
              -       Signal the end of options, cause all  remaining
                      args  to  be assigned to the positional parame-
                      ters.  The -x and -v options  are  turned  off.
                      If there are no args, the positional parameters
                      remain unchanged.
    
              The options are off by default unless otherwise  noted.
              Using + rather than - causes these options to be turned
              off.  The options can also be specified as arguments to
              an invocation of the shell.  The current set of options
              may be found in $-.  The return status is  always  true
              unless an invalid option is encountered.
    
         shift [n]
              The positional parameters from n+1 ... are  renamed  to
              $1  ....  Parameters represented by the numbers $# down
              to $#-n+1 are unset.  n must be a  non-negative  number
              less than or equal to $#.  If n is 0, no parameters are
              changed.  If n is not given, it is assumed to be 1.  If
              n is greater than $#, the positional parameters are not
              changed.  The return status is greater than zero  if  n
              is greater than $# or less than zero; otherwise 0.
    
         shopt [-pqsu] [-o] [optname ...]
              Toggle the values  of  variables  controlling  optional
              shell  behavior.   With  no  options,  or  with  the -p
              option, a list of all settable  options  is  displayed,
              with  an indication of whether or not each is set.  The
              -p option causes output to be displayed in a form  that
              may be reused as input.  Other options have the follow-
              ing meanings:
              -s   Enable (set) each optname.
              -u   Disable (unset) each optname.
              -q   Suppresses normal output (quiet mode); the  return
                   status  indicates  whether  the  optname is set or
                   unset.  If multiple optname  arguments  are  given
                   with -q, the return status is zero if all optnames
                   are enabled; non-zero otherwise.
              -o   Restricts  the  values  of  optname  to  be  those
                   defined for the -o option to the set builtin.
    
              If either -s or -u is used with no  optname  arguments,
              the  display  is limited to those options which are set
              or unset, respectively.  Unless  otherwise  noted,  the
              shopt options are disabled (unset) by default.
    
              The return status when listing options is zero  if  all
              optnames are enabled, non-zero otherwise.  When setting
              or unsetting options, the return status is zero  unless
              an optname is not a valid shell option.
    
              The list of shopt options is:
    
              cdable_vars
                      If set, an argument to the cd  builtin  command
                      that  is  not  a directory is assumed to be the
                      name of a variable whose value is the directory
                      to change to.
              cdspell If set, minor  errors  in  the  spelling  of  a
                      directory  component  in  a  cd command will be
                      corrected.  The errors checked  for  are  tran-
                      sposed characters, a missing character, and one
                      character too many.  If a correction is  found,
                      the  corrected  file  name  is printed, and the
                      command proceeds.  This option is only used  by
                      interactive shells.
              checkhash
                      If set, bash checks that a command found in the
                      hash  table exists before trying to execute it.
                      If a hashed command no longer exists, a  normal
                      path search is performed.
              checkwinsize
                      If set, bash checks the window size after  each
                      command  and,  if necessary, updates the values
                      of LINES and COLUMNS.
              cmdhist If set, bash attempts to save all  lines  of  a
                      multiple-line   command  in  the  same  history
                      entry.  This allows easy re-editing  of  multi-
                      line commands.
              dotglob If set, bash includes filenames beginning  with
                      a `.' in the results of pathname expansion.
              execfail
                      If set, a non-interactive shell will  not  exit
                      if  it  cannot execute the file specified as an
                      argument  to  the  exec  builtin  command.   An
                      interactive shell does not exit if exec fails.
              expand_aliases
                      If set, aliases are expanded as described above
                      under  ALIASES.   This  option  is  enabled  by
                      default for interactive shells.
              extglob If set, the extended pattern matching  features
                      described  above  under  Pathname Expansion are
                      enabled.
              histappend
                      If set, the history list  is  appended  to  the
                      file  named  by the value of the HISTFILE vari-
                      able  when  the  shell   exits,   rather   than
                      overwriting the file.
              histreedit
                      If set, and readline is being used, a  user  is
                      given  the opportunity to re-edit a failed his-
                      tory substitution.
              histverify
                      If set, and readline is being used, the results
                      of  history  substitution  are  not immediately
                      passed  to  the  shell  parser.   Instead,  the
                      resulting  line  is  loaded  into  the readline
                      editing buffer, allowing further modification.
              hostcomplete
                      If set, and readline is being used,  bash  will
                      attempt  to  perform hostname completion when a
                      word containing a @  is  being  completed  (see
                      Completing  under  READLINE  above).   This  is
                      enabled by default.
              huponexit
                      If set, bash will send SIGHUP to all jobs  when
                      an interactive login shell exits.
              interactive_comments
                      If set, allow a word beginning with # to  cause
                      that  word and all remaining characters on that
                      line to be ignored in an interactive shell (see
                      COMMENTS  above).   This  option  is enabled by
                      default.
              lithist If set, and  the  cmdhist  option  is  enabled,
                      multi-line  commands  are  saved to the history
                      with embedded newlines rather than using  semi-
                      colon separators where possible.
              mailwarn
                      If set, and a file that bash  is  checking  for
                      mail  has  been accessed since the last time it
                      was checked, the message ``The mail in mailfile
                      has been read'' is displayed.
              nocaseglob
                      If   set,   bash   matches   filenames   in   a
                      case-insensitive    fashion   when   performing
                      pathname  expansion  (see  Pathname   Expansion
                      above).
              nullglob
                      If set, bash allows  patterns  which  match  no
                      files  (see Pathname Expansion above) to expand
                      to a null string, rather than themselves.
              promptvars
                      If set, prompt  strings  undergo  variable  and
                      parameter  expansion  after  being  expanded as
                      described in PROMPTING above.  This  option  is
                      enabled by default.
              restricted_shell
                      The shell sets this option if it is started  in
                      restricted  mode  (see RESTRICTED SHELL below).
                      The value may not  be  changed.   This  is  not
                      reset  when  the  startup  files  are executed,
                      allowing the startup files to discover  whether
                      or not a shell is restricted.
              shift_verbose
                      If set, the shift builtin prints an error  mes-
                      sage when the shift count exceeds the number of
                      positional parameters.
              sourcepath
                      If set, the source (.) builtin uses  the  value
                      of  PATH  to  find the directory containing the
                      file supplied as an argument.  This  option  is
                      enabled by default.
         suspend [-f]
              Suspend the execution of this shell until it receives a
              SIGCONT  signal.  The -f option says not to complain if
              this is a login shell; just suspend anyway.  The return
              status is 0 unless the shell is a login shell and -f is
              not supplied, or if job control is not enabled.
         test expr
         [ expr ]
              Return a status of 0 or 1 depending on  the  evaluation
              of  the conditional expression expr.  Each operator and
              operand must be a separate argument.   Expressions  are
              composed  of the primaries described above under CONDI-
              TIONAL EXPRESSIONS.
    
              Expressions may be combined using the following  opera-
              tors, listed in decreasing order of precedence.
              ! expr
                   True if expr is false.
              ( expr )
                   Returns the value of expr.  This may  be  used  to
                   override the normal precedence of operators.
              expr1 -a expr2
                   True if both expr1 and expr2 are true.
              expr1 -o expr2
                   True if either expr1 or expr2 is true.
    
              test and [ evaluate conditional expressions using a set
              of rules based on the number of arguments.
    
              0 arguments
                   The expression is false.
              1 argument
                   The expression is true if and only if the argument
                   is not null.
              2 arguments
                   If the first argument is !, the expression is true
                   if  and  only  if the second argument is null.  If
                   the first argument is one of the unary conditional
                   operators  listed  above under CONDITIONAL EXPRES-
                   SIONS, the expression is true if the unary test is
                   true.   If the first argument is not a valid unary
                   conditional operator, the expression is false.
              3 arguments
                   If the second argument is one of the binary condi-
                   tional  operators  listed  above under CONDITIONAL
                   EXPRESSIONS, the result of the expression  is  the
                   result  of  the  binary  test  using the first and
                   third arguments as operands.  If the  first  argu-
                   ment  is  !, the value is the negation of the two-
                   argument test using the  second  and  third  argu-
                   ments.  If the first argument is exactly ( and the
                   third argument is exactly ),  the  result  is  the
                   one-argument  test of the second argument.  Other-
                   wise, the expression is  false.   The  -a  and  -o
                   operators  are considered binary operators in this
                   case.
              4 arguments
                   If the first argument is  !,  the  result  is  the
                   negation of the three-argument expression composed
                   of  the  remaining  arguments.    Otherwise,   the
                   expression  is  parsed  and evaluated according to
                   precedence using the rules listed above.
              5 or more arguments
                   The expression is parsed and  evaluated  according
                   to precedence using the rules listed above.
    
         times
              Print the accumulated user and  system  times  for  the
              shell and for processes run from the shell.  The return
              status is 0.
    
         trap [-lp] [arg] [sigspec ...]
              The command arg is to be read  and  executed  when  the
              shell  receives signal(s) sigspec.  If arg is absent or
              -, all specified signals are reset  to  their  original
              values  (the  values  they  had  upon  entrance  to the
              shell).  If arg is the null string the signal specified
              by  each  sigspec  is  ignored  by the shell and by the
              commands it invokes.  If arg is -p then the  trap  com-
              mands  associated  with each sigspec are displayed.  If
              no arguments are supplied or if only -p is given,  trap
              prints the list of commands associated with each signal
              number.  Each sigspec is either a signal  name  defined
              in  <signal.h>,  or  a  signal number.  If a sigspec is
              EXIT (0) the command arg is executed on exit  from  the
              shell.   If a sigspec is DEBUG, the command arg is exe-
              cuted after every simple  command  (see  SHELL  GRAMMAR
              above).  The -l option causes the shell to print a list
              of signal names and their corresponding numbers.   Sig-
              nals  ignored upon entry to the shell cannot be trapped
              or reset.  Trapped signals are reset to their  original
              values  in  a  child  process  when it is created.  The
              return status is false if any sigspec is invalid;  oth-
              erwise trap returns true.
    
         type [-atp] name [name ...]
              With no options, indicate how each name would be inter-
              preted  if used as a command name.  If the -t option is
              used, type prints a string which is one of alias,  key-
              word,  function,  builtin, or file if name is an alias,
              shell reserved word, function, builtin, or  disk  file,
              respectively.   If  the name is not found, then nothing
              is printed, and an exit status of  false  is  returned.
              If  the -p option is used, type either returns the name
              of the disk file that would be executed  if  name  were
              specified as a command name, or nothing if type -t name
              would not return file.  If  a  command  is  hashed,  -p
              prints  the hashed value, not necessarily the file that
              appears first in PATH.  If the -a option is used,  type
              prints  all  of  the  places that contain an executable
              named name.  This includes aliases  and  functions,  if
              and  only if the -p option is not also used.  The table
              of hashed commands is  not  consulted  when  using  -a.
              type  returns  true  if any of the arguments are found,
              false if none are found.
    
         ulimit [-SHacdflmnpstuv [limit]]
              Provides control over the resources  available  to  the
              shell  and  to processes started by it, on systems that
              allow such control.  The value of limit can be a number
              in  the  unit  specified for the resource, or the value
              unlimited.  The -H and -S options specify that the hard
              or  soft  limit  is set for the given resource.  A hard
              limit cannot be increased once it is set; a soft  limit
              may be increased up to the value of the hard limit.  If
              neither -H nor -S is specified, both the soft and  hard
              limits are set.  If limit is omitted, the current value
              of the soft limit of the resource  is  printed,  unless
              the -H option is given.  When more than one resource is
              specified, the limit name and unit are  printed  before
              the value.  Other options are interpreted as follows:
              -a   All current limits are reported
              -c   The maximum size of core files created
              -d   The maximum size of a process's data segment
              -f   The maximum size of files created by the shell
              -l   The maximum size that may be locked into memory
              -m   The maximum resident set size
              -n   The maximum number of open file descriptors  (most
                   systems do not allow this value to be set)
              -p   The pipe size in 512-byte blocks (this may not  be
                   set)
              -s   The maximum stack size
              -t   The maximum amount of cpu time in seconds
              -u   The maximum number of  processes  available  to  a
                   single user
              -v   The maximum amount of virtual memory available  to
                   the shell
    
              If limit is given, it is the new value of the specified
              resource (the -a option is display only).  If no option
              is given, then -f is assumed.  Values are in  1024-byte
              increments,  except  for  -t,  which is in seconds, -p,
              which is in units of 512-byte blocks, and  -n  and  -u,
              which  are  unscaled  values.   The  return status is 0
              unless an invalid option is encountered, a  non-numeric
              argument  other than unlimited is supplied as limit, or
              an error occurs while setting a new limit.
    
         umask [-p] [-S] [mode]
              The user file-creation mask is set to  mode.   If  mode
              begins  with  a  digit,  it  is interpreted as an octal
              number; otherwise it is interpreted as a symbolic  mode
              mask  similar to that accepted by chmod(1).  If mode is
              omitted, or if the -S option is supplied,  the  current
              value of the mask is printed.  The -S option causes the
              mask to be printed in symbolic form; the default output
              is  an octal number.  If the -p option is supplied, and
              mode is omitted, the output is in a form  that  may  be
              reused  as  input.   The return status is 0 if the mode
              was successfully changed or if  no  mode  argument  was
              supplied, and false otherwise.
    
         unalias [-a] [name ...]
              Remove names from the list of defined aliases.   If  -a
              is  supplied,  all  alias definitions are removed.  The
              return value is true unless a supplied name  is  not  a
              defined alias.
    
         unset [-fv] [name ...]
              For each name, remove  the  corresponding  variable  or
              function.  If no options are supplied, or the -v option
              is given, each name refers to a shell variable.   Read-
              only  variables  may  not be unset.  If -f is specifed,
              each name refers to a shell function, and the  function
              definition is removed.  Each unset variable or function
              is removed from the environment  passed  to  subsequent
              commands.   If any of RANDOM, SECONDS, LINENO, HISTCMD,
              or DIRSTACK are unset, they lose their special  proper-
              ties,  even  if  they are subsequently reset.  The exit
              status is true unless a  name  does  not  exist  or  is
              readonly.
    
         wait [n]
              Wait for the specified process and return its  termina-
              tion status.  n may be a process ID or a job specifica-
              tion; if a job spec is given,  all  processes  in  that
              job's  pipeline are waited for.  If n is not given, all
              currently active child processes are  waited  for,  and
              the  return  status  is  zero.   If  n specifies a non-
              existent process or job,  the  return  status  is  127.
              Otherwise,  the return status is the exit status of the
              last process or job waited for.
    
    RESTRICTED SHELL
         If bash is started with the name rbash, or the -r option  is
         supplied  at  invocation,  the  shell becomes restricted.  A
         restricted shell is used to set up an environment more  con-
         trolled  than the standard shell.  It behaves identically to
         bash with the exception that the following are disallowed or
         not performed:
    
         o    changing directories with cd
    
         o    setting or unsetting the values of SHELL, PATH, ENV, or
              BASH_ENV
    
         o    specifying command names containing /
    
         o    specifying a file name containing a / as an argument to
              the . builtin command
    
         o    importing function definitions from the shell  environ-
              ment at startup
    
         o    parsing the value of SHELLOPTS from the shell  environ-
              ment at startup
    
         o    redirecting output using the >, >|, <>, >&, &>, and  >>
              redirection operators
    
         o    using the exec builtin command  to  replace  the  shell
              with another command
    
         o    adding or deleting builtin commands with the -f and  -d
              options to the enable builtin command
    
         o    specifying the -p option to the command builtin command
    
         o    turning off restricted mode with set +r or set +o  res-
              tricted.
    
         These restrictions are enforced after any startup files  are
         read.
    
         When a command that is found to be a shell  script  is  exe-
         cuted  (see  COMMAND  EXECUTION  above), rbash turns off any
         restrictions in the shell spawned to execute the script.
    
    SEE ALSO
         Bash Features, Brian Fox and Chet Ramey
         The Gnu Readline Library, Brian Fox and Chet Ramey
         The Gnu History Library, Brian Fox and Chet Ramey
    Utilities, IEEE
         Portable Operating System Interface (POSIX)  Part  2:  Shell  and
         sh(1), ksh(1), csh(1)
         emacs(1), vi(1)
         readline(3)
    
    FILES
         /bin/bash
              The bash executable
         /etc/profile
              The systemwide initialization file, executed for  login
              shells
         ~/.bash_profile
              The personal initialization file,  executed  for  login
              shells
         ~/.bashrc
              The individual per-interactive-shell startup file
         ~/.bash_logout
              The individual login shell cleanup file, executed  when
              a login shell exits
         ~/.inputrc
              Individual readline initialization file
    
    AUTHORS
         Brian Fox, Free Software Foundation
         bfox@gnu.ai.MIT.Edu
    
         Chet Ramey, Case Western Reserve University
         chet@ins.CWRU.Edu
    
    BUG REPORTS
         If you find a bug in bash, you should report it.  But first,
         you  should  make  sure that it really is a bug, and that it
         appears in the latest version of bash that you have.
         Once you have determined that a bug actually exists, use the
         bashbug  command to submit a bug report.  If you have a fix,
         you are encouraged to mail that as  well!   Suggestions  and
         `philosophical'   bug   reports   may   be  mailed  to  bug-
         bash@gnu.org or posted to the Usenet newsgroup gnu.bash.bug.
    
         ALL bug reports should include:
    
         The version number of bash
         The hardware and operating system
         The compiler used to compile
         A description of the bug behaviour
         A short script or `recipe' which exercises the bug
    
         bashbug inserts the first three items automatically into the
         template it provides for filing a bug report.
    
         Comments and bug reports concerning this manual page  should
         be directed to chet@ins.CWRU.Edu.
    
    BUGS
         It's too big and too slow.
    
         There are some subtle differences between  bash  and  tradi-
         tional  versions of sh, mostly because of the POSIX specifi-
         cation.
    
         Aliases are confusing in some uses.
    
         Shell   builtin   commands    and    functions    are    not
         stoppable/restartable.
    
         Compound commands and command sequences of the form `a ; b ;
         c'  are  not  handled  gracefully when process suspension is
         attempted.  When a process is stopped, the shell immediately
         executes  the  next command in the sequence.  It suffices to
         place the sequence of commands between parentheses to  force
         it into a subshell, which may be stopped as a unit.
    
         Commands inside  of  $(...)  command  substitution  are  not
         parsed  until  substitution  is  attempted.  This will delay
         error  reporting  until  some  time  after  the  command  is
         entered.
    
         Array variables may not (yet) be exported.
    
    
    
    


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру