[ новости /+++ | форум | теги | ]

NAME

chs - IBM ServeRAID PCI host adapter
driver
 

DESCRIPTION

The chs driver is the IBM ServeRAID PCI controller driver.  

PRECONFIGURATION

Known Problems and Limitations

To prevent data loss, a SCSI disk drive that is not defined as part of any physical pack within a logical drive will not be accessible through the Solaris operating environment.  

CONFIGURATION

Auto-configuration code determines whether the adapter is present at the configured address and what types of devices are attached to it. The IBM ServeRAID is primarily used as a disk array (system drive) controller.

To configure the attached disk arrays, you must configure the controller (using the configuration utilities provided by the hardware manufacturer) before booting the Solaris operating environment You use the configuration utilities to set RAID levels, stripe parameters, cache mechanisms and perform other functions. For more information, see the user manual supplied with your hardware.  

FILES

/kernel/drv/chs.conf chs configuration file

/dev/dsk/cndn[s|p]n block device

/dev/rdsk/cndn[s|p]n raw device where:

cn controller n

dn LUN n (0-7)

sn UNIX system slice n (0-15)

pn fdisk(1M) partition (0)

ATTRIBUTES

See attributes(5) for a description of the following attributes:

ATTRIBUTE TYPE ATTRIBUTE VALUE Architecture x86

SEE ALSO

fdisk(1M), attributes(5), cmdk(7D)

Index

NAME

DESCRIPTION

PRECONFIGURATION

Known Problems and Limitations

CONFIGURATION

FILES

ATTRIBUTES

SEE ALSO

Партнёры:

Хостинг: