The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

cpustat (1)
  • >> cpustat (1) ( Solaris man: Команды и прикладные программы пользовательского уровня )
  •  

    NAME

    cpustat - monitor system behavior using CPU performance counters
     
    

    SYNOPSIS

    cpustat -c eventspec [-c eventspec]... [-p period] [-sntD] 
        [interval [count]]
    

    cpustat -h
    

     

    DESCRIPTION

    The cpustat utility allows CPU performance counters to be used to monitor the overall behavior of the CPUs in the system.

    If interval is specified, cpustat samples activity every interval seconds, repeating forever. If a count is specified, the statistics are repeated count times. If neither are specified, an interval of five seconds is used, and there is no limit to the number of samples that are taken.  

    OPTIONS

    The following options are supported:

    -c eventspec

    Specifies a set of events for the CPU performance counters to monitor. The syntax of these event specifications is:

    [picn=]eventn[,attr[n][=val]][,[picn=]eventn
        [,attr[n][=val]],...,]
    

    You can use the -h option to obtain a list of available events and attributes. This causes generation of the usage message. You can omit an explicit counter assignment, in which case cpustat attempts to choose a capable counter automatically.

    Attribute values can be expressed in hexadecimal, octal, or decimal notation, in a format suitable for strtoll(3C). An attribute present in the event specification without an explicit value receives a default value of 1. An attribute without a corresponding counter number is applied to all counters in the specification.

    The semantics of these event specifications can be determined by reading the CPU manufacturer's documentation for the events.

    Multiple -c options can be specified, in which case the command cycles between the different event settings on each sample.

    -D

    Enables debug mode.

    -h

    Prints an extensive help message on how to use the utility and how to program the processor-dependent counters.

    -p period

    Causes cpustat to cycle through the list of eventspecs every period seconds. The tool sleeps after each cycle until period seconds have elapsed since the first eventspec was measured.

    When this option is present, the optional count parameter specifies the number of total cycles to make (instead of the number of total samples to take). If period is less than the number of eventspecs times interval, the tool acts as it period is 0.

    -s

    Creates an idle soaker thread to spin while system-only eventspecs are bound. One idle soaker thread is bound to each CPU in the current processor set. System-only eventspecs contain both the nouser and the sys tokens and measure events that occur while the CPU is operating in privileged mode. This option prevents the kernel's idle loop from running and triggering system-mode events.

    -n

    Omits all header output (useful if cpustat is the beginning of a pipeline).

    -t

    Prints an additional column of processor cycle counts, if available on the current architecture.

     

    USAGE

    A closely related utility, cputrack(1), can be used to monitor the behavior of individual applications with little or no interference from other activities on the system.

    The cpustat utility must be run by the super-user, as there is an intrinsic conflict between the use of the CPU performance counters system-wide by cpustat and the use of the CPU performance counters to monitor an individual process (for example, by cputrack.)

    Once any instance of this utility has started, no further per-process or per-LWP use of the counters is allowed until the last instance of the utility terminates.

    The times printed by the command correspond to the wallclock time when the hardware counters were actually sampled, instead of when the program told the kernel to sample them. The time is derived from the same timebase as gethrtime(3C).

    The processor cycle counts enabled by the -t option always apply to both user and system modes, regardless of the settings applied to the performance counter registers.

    On some hardware platforms running in system mode using the "sys" token, the counters are implemented using 32-bit registers. While the kernel attempts to catch all overflows to synthesize 64-bit counters, because of hardware implementation restrictions, overflows can be lost unless the sampling interval is kept short enough. The events most prone to wrap are those that count processor clock cycles. If such an event is of interest, sampling should occur frequently so that less than 4 billion clock cycles can occur between samples.

    The output of cpustat is designed to be readily parseable by nawk(1) and perl(1), thereby allowing performance tools to be composed by embedding cpustat in scripts. Alternatively, tools can be constructed directly using the same APIs that cpustat is built upon using the facilities of libcpc(3LIB). See cpc(3CPC).

    The cpustat utility only monitors the CPUs that are accessible to it in the current processor set. Thus, several instances of the utility can be running on the CPUs in different processor sets. See psrset(1M) for more information about processor sets.

    Because cpustat uses LWPs bound to CPUs, the utility might have to be terminated before the configuration of the relevant processor can be changed.  

    EXAMPLES

     

    SPARC

    Example 1 Measuring External Cache References and Misses

    The following example measures misses and references in the external cache. These occur while the processor is operating in user mode on an UltraSPARC machine.

    example% cpustat -c EC_ref,EC_misses 1 3
    
       time cpu event      pic0      pic1
      1.008   0  tick     69284      1647
      1.008   1  tick     43284      1175
      2.008   0  tick    179576      1834
      2.008   1  tick    202022     12046
      3.008   0  tick     93262       384
      3.008   1  tick     63649      1118
      3.008   2 total    651077     18204
    

     

    x86

    Example 2 Measuring Branch Prediction Success on Pentium 4

    The following example measures branch mispredictions and total branch instructions in user and system mode on a Pentium 4 machine.

     example% cpustat -c \
       pic12=branch_retired,emask12=0x4,pic14=branch_retired,\
       emask14=0xf,sys 1 3
     
       time cpu event      pic12     pic14
      1.010   1  tick       458       684 
      1.010   0  tick       305       511 
      2.010   0  tick       181       269 
      2.010   1  tick       469       684 
      3.010   0  tick       182       269 
      3.010   1  tick       468       684 
      3.010   2 total      2063      3101 
    

    Example 3 Counting Memory Accesses on Opteron

    The following example determines the number of memory accesses made through each memory controller on an Opteron, broken down by internal memory latency:

    cpustat -c \
      pic0=NB_mem_ctrlr_page_access,umask0=0x01, \
      pic1=NB_mem_ctrlr_page_access,umask1=0x02, \
      pic2=NB_mem_ctrlr_page_access,umask2=0x04,sys \
      1
    
       time cpu event      pic0      pic1      pic2
      1.003   0  tick     41976     53519      7720
      1.003   1  tick      5589     19402       731
      2.003   1  tick      6011     17005       658
      2.003   0  tick     43944     45473      7338
      3.003   1  tick      7105     20177       762
      3.003   0  tick     47045     48025      7119
      4.003   0  tick     43224     46296      6694
      4.003   1  tick      5366     19114       652
    

     

    WARNINGS

    By running the cpustat command, the super-user forcibly invalidates all existing performance counter context. This can in turn cause all invocations of the cputrack command, and other users of performance counter context, to exit prematurely with unspecified errors.

    If cpustat is invoked on a system that has CPU performance counters which are not supported by Solaris, the following message appears:

    cpustat: cannot access performance counters - Operation not applicable
    

    This error message implies that cpc_open() has failed and is documented in cpc_open(3CPC). Review this documentation for more information about the problem and possible solutions.

    If a short interval is requested, cpustat might not be able to keep up with the desired sample rate. In this case, some samples might be dropped.  

    ATTRIBUTES

    See attributes(5) for descriptions of the following attributes:

    ATTRIBUTE TYPEATTRIBUTE VALUE

    AvailabilitySUNWcpcu

    Interface Stability

     

    SEE ALSO

    cputrack(1), nawk(1), perl(1), iostat(1M), prstat(1M), psrset(1M), vmstat(1M), cpc(3CPC), cpc_open(3CPC), cpc_bind_cpu(3CPC), gethrtime(3C), strtoll(3C), libcpc(3LIB), attributes(5)  

    NOTES

    When cpustat is run on a Pentium 4 with HyperThreading enabled, a CPC set is bound to only one logical CPU of each physical CPU. See cpc_bind_cpu(3CPC).


     

    Index

    NAME
    SYNOPSIS
    DESCRIPTION
    OPTIONS
    USAGE
    EXAMPLES
    SPARC
    x86
    WARNINGS
    ATTRIBUTES
    SEE ALSO
    NOTES


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру