The OpenNET Project / Index page

[ новости /+++ | форум | wiki | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

java (1)
  • >> java (1) ( Solaris man: Команды и прикладные программы пользовательского уровня )
  • java (1) ( Linux man: Команды и прикладные программы пользовательского уровня )
  • Ключ java обнаружен в базе ключевых слов.
  • 
    NAME
         java - Java interpreter
    
    SYNOPSIS
         java [ -cs | -checksource ] [ -classpathpath ]
              [ -DpropertyName=newValue ] [ -debug ] [ -fullversion ]
              [ -help ] [ -msx ] [ -mxx ] [ -noasyncgc ]
              [ -noclassgc ] [ -noverify ] [ -ossx ] [ -prof ]
              [ -proffile ] [ -ssx ] [ -t ] [ -v | -verbose ]
              [ -verbosegc ] [ -verify ] [ -verifyremote ]
              [ -version ] classname <args>
         java_g [ -cs | -checksource ] [ -classpathpath ]
              [ -DpropertyName=newValue ] [ -debug ] [ -fullversion ]
              [ -help ] [ -msx ] [ -mxx ] [ -noasyncgc ]
              [ -noclassgc ] [ -noverify ] [ -ossx ] [ -prof ]
              [ -proffile ] [ -ssx ] [ -t ] [ -v | -verbose ]
              [ -verbosegc ] [ -verify ] [ -verifyremote ]
              [ -version ] classname <args>
    
    DESCRIPTION
         The java command executes Java bytecodes created by the Java
         compiler,  javac.   The JIT (just in time) compiler compiles
         these bytecodes into machine instructions by default in  the
         Solaris  Java VM when using java.  (To disable this default,
         see the USAGE section below.)
    
         The classname argument is the name of the class to  be  exe-
         cuted  and  must be fully qualified by including the package
         in the name, for example:
    
              example% java java.lang.String
    
         Note that any arguments that appear after classname  on  the
         command line are passed to the main() method of the class.
    
         The bytecodes for  the  class  are  put  in  a  file  called
         classname.class  by  compiling the corresponding source file
         with javac. All Java bytecode files end  with  the  filename
         extension  .class which the compiler automatically adds when
         the class is compiled.  The classname argument must  contain
         a main() method defined as follows:
    
              class Aclass {
                   public static void main(String argv[]){
                             . . .
                   }
              }
    
         The java command executes the main() method and exits unless
         main()  creates  one  or  more  threads.  In this case, java
         doesn't exit until the last thread exits.
    
         When defining  classes,  specify  their  location  with  the
         CLASSPATH  environment  variable, which consists of a colon-
         separated list of directories that specifies the path.   For
         example:
    
              .:/home/avh/classes
    
         Note that the system always appends the location of the sys-
         tem classes onto the end of the class path.
    
         Ordinarily, compile source files with javac,  then  run  the
         program  using  java.   However, java can be used to compile
         and run programs when the -cs option is used. As each  class
         is  loaded, the modification date is compared to that of the
         class source file. If the  source  has  been  modified  more
         recently,  it  is  recompiled  and  the new bytecode file is
         loaded. The java command repeats this  procedure  until  all
         the classes are correctly compiled and loaded.
    
         The interpreter determines whether a class is legitimate  by
         verification  that  ensures that the bytecodes, being inter-
         preted, do not violate language constraints.
    
         java_g is a non-optimized  version  of  java  for  use  with
         debuggers  like  jdb(1).  When using java_g to run a program
         that loads a shared library, you must supply a debug version
         of the library.  You can create a debug version of a library
         by simply appending "_g" to the name of the file.  For exam-
         ple,  if  the  library was libhello.so, the debug version of
         the library would be named libhello.so_g.
    
    OPTIONS
         -cs | -checksource
                        When a compiled class is loaded, this  option
                        causes  the  modification  time  of the class
                        bytecode file to be compared to that  of  the
                        class  source  file.  If  the source has been
                        modified more recently, it is recompiled  and
                        the new bytecode file is loaded.
    
         -classpathpath Specifies the path that java uses to look  up
                        classes.    This  overrides  the  default  or
                        CLASSPATH environment variable, if it is set.
                        The system appends the location of the system
                        classes onto the end  of  path.   Directories
                        are  separated  by  colons. Thus, the general
                        format for path is:
    
                             .:<your_path>
    
                        For example:
    
                             .:/home/avh/classes:/usr/local/java/classes
    
    
         -DpropertyName=newValue
                        Redefines a property value where propertyName
                        is  the  name  of  the  property  value to be
                        changed and newValue is the value. For  exam-
                        ple, this command line
    
                             example%  java  -Dawt.button.color=green
                             ...
    
                        sets    the    value    of    the    property
                        awt.button.color  to green.  java accepts any
                        number of -D options on the command line.
    
         -debug         Allows the Java debugger - jdb(1) - to attach
                        itself  to  this java session. When -debug is
                        specified on the command line java displays a
                        password  that must be used when starting the
                        debugging session.
    
         -fullversion   Displays full version information.
    
         -help          Displays a usage message.
    
         -msx           Sets the startup size of the  memory  alloca-
                        tion  pool (the garbage collected heap) to x.
                        The default is 4 megabytes of memory.  x must
                        be  >  1000  bytes  and  must be less than or
                        equal to the maximum memory  size  (specified
                        with the -mx option).
    
                        By  default,  x  is  measured  in  bytes.  To
                        specify  x  in either kilobytes or megabytes,
                        append "k" for kilobytes  or  "m"  for  mega-
                        bytes.
    
         -mxx           Sets the maximum size of the  memory  alloca-
                        tion  pool (the garbage collected heap) to x.
                        The default is 16  megabytes  of  memory.   x
                        must be > 1000 bytes and must be greater than
                        or equal to the startup memory  size  (speci-
                        fied with the -ms option).
    
                        By  default,  x  is  measured  in  bytes.  To
                        specify  x  in either kilobytes or megabytes,
                        append the letter "k" for  kilobytes  or  the
                        letter "m" for megabytes.
    
    
    
         -noasyncgc     Turns off  asynchronous  garbage  collection.
                        When  activated  no  garbage collection takes
                        place unless it is explicitly called  or  the
                        program runs out of memory.  Normally garbage
                        collection runs as an asynchronous thread  in
                        parallel with other threads.
    
         -noclassgc     Turns off garbage collection of Java classes.
                        By  default,  the  Java  interpreter reclaims
                        space for unused Java classes during  garbage
                        collection.
    
         -noverify      Turns verification off.
    
         -ossx          Each Java thread has two stacks: one for Java
                        code and one for C code. The -oss option sets
                        the maximum stack size that can  be  used  by
                        Java code in a thread to x. Every thread that
                        is spawned during the execution of  the  pro-
                        gram  passed  to java has x as its Java stack
                        size. The default units for x are bytes and x
                        must be > 1000 bytes.
    
                        To modify the meaning of x, append either the
                        letter  "k"  for  kilobytes or the letter "m"
                        for megabytes. The default stack size is  400
                        kilobytes (-oss400k).
    
         -prof          Starts Java runtime  with  java(1)  profiling
                        enabled.    By  default,  this  puts  profile
                        results in the file ./java.prof.  This option
                        only works with java_g.
    
         -proffile      Starts Java runtime  with  java(1)  profiling
                        enabled.  This  form of the option allows the
                        user to specify a different output  file  for
                        the  profile  information.   For example, the
                        option  -prof:myprog.prof  enables  profiling
                        and  puts  the  profile  results  in the file
                        myprog.prof rather than in the  default  file
                        ./java.prof.
    
         -ssx           Each Java thread has two stacks: one for Java
                        code  and one for C code. The -ss option sets
                        the maximum stack size that can be used by  C
                        code  in  a thread to x. Every thread that is
                        spawned during the execution of  the  program
                        passed to java has x as its C stack size. The
                        default units for x are bytes and x must be >
                        1000 bytes.
    
                        To modify the meaning of x, append either the
                        letter  "k"  for  kilobytes or the letter "m"
                        for megabytes. The default stack size is  128
                        kilobytes (-ss128k).
    
         -t             Prints a trace of the  instructions  executed
                        (java_g only).
    
         -v | -verbose  Causes java to print a message to stdout each
                        time a class file is loaded.
    
         -verbosegc     Causes the garbage collector  to  print  mes-
                        sages whenever it frees memory.
    
         -verify        Runs the verifier on all code.
    
         -verifyremote  Runs the verifier on all code that is  loaded
                        into  the system via a classloader. The -ver-
                        ifyremote  option  is  the  default  for  the
                        interpreter.
    
         -version       Displays the build version information.
    
    USAGE
         The java command uses the JIT compiler by default. Either of
         the  following  methods may be used to disable this default:
         (1) set the JAVA_COMPILER environment variable to "NONE", or
         (2) use the -D option as follows:
    
              example% java -Djava.compiler=none classname
    
    
    ENVIRONMENT VARIABLES
         CLASSPATH      Used to provide the system  with  a  path  to
                        user-defined    classes.    Directories   are
                        separated by colons, for example:
    
                             .:/home/avh/classes:/usr/local/java/classes
    
    
         JAVA_COMPILER  Overrides the default value for the  property
                        java.compiler  uses  to  speed program execu-
                        tion.  The default value is  "sunwjit"  which
                        causes  the file libsunwjit.so to be used.  A
                        value of "NONE" turns off compilation.
    
    FILES
         libsunwjit.so       Library  containing   runtime   bytecode
                             optimization files.
    
    ATTRIBUTES
         See attributes(5) for descriptions of the  following  attri-
         butes:
         __________________________________
        | ATTRIBUTE TYPE|  ATTRIBUTE VALUE|
        |_______________|__________________|_
        | Availability  |  SUNWjvrt       |
        |_______________|_________________|
    
    SEE ALSO
         javac(1), javadoc(1), javah(1), javap(1), jdb(1)
    
    
    
    


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру