The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

keytables (4)
  • >> keytables (4) ( Solaris man: Специальные файлы /dev/* )
  •  

    NAME

    keytables - keyboard table descriptions for loadkeys and dumpkeys
     
    

    DESCRIPTION

    These files are used by loadkeys(1) to modify the translation tables used by the keyboard streams module and generated from those translation tables. See loadkeys(1).

    Any line in the file beginning with # is a comment, and is ignored. # is treated specially only at the beginning of a line.

    Other lines specify the values to load into the tables for a particular keystation. The format is either:

    key number list_of_entries
    

    or

    swap number1 with number2
    

    or

    key number1 same as number2
    

    or a blank line, which is ignored.

    key number list_of_entries
    

    sets the entries for keystation number from the list given. An entry in that list is of the form

    tablename code
    

    where tablename is the name of a particular translation table, or all. The translation tables are:

    base

    entry when no shifts are active

    shift

    entry when "Shift" key is down

    caps

    entry when "Caps Lock" is in effect

    ctrl

    entry when "Control" is down

    altg

    entry when "Alt Graph" is down

    numl

    entry when "Num Lock" is in effect

    up

    entry when a key goes up

    All tables other than up refer to the action generated when a key goes down. Entries in the up table are used only for shift keys, since the shift in question goes away when the key goes up, except for keys such as "Caps Lock" or "Num Lock"; the keyboard streams module makes the key look as if it were a latching key.

    A table name of all indicates that the entry for all tables should be set to the specified value, with the following exception: for entries with a value other than hole, the entry for the numl table should be set to nonl, and the entry for the up table should be set to nop.

    The code specifies the effect of the key in question when the specified shift key is down. A code consists of either:

    o A character, which indicates that the key should generate the given character. The character can either be a single character, a single character preceded by ^ which refers to a "control character" (for instance, ^c is control-C), or a C-style character constant enclosed in single quote characters ('), which can be expressed with C-style escape sequences such as \r for RETURN or \000 for the null character. Note that the single character may be any character in an 8-bit character set, such as ISO 8859/1.
    o A string, consisting of a list of characters enclosed in double quote characters ("). Note that the use of the double quote character means that a code of double quote must be enclosed in single quotes.
    o One of the following expressions:

    shiftkeys+leftshift

    the key is to be the left-hand "Shift" key

    shiftkeys+rightshift

    the key is to be the right-hand "Shift" key

    shiftkeys+leftctrl

    the key is to be the left-hand "Control" key

    shiftkeys+rightctrl

    the key is to be the right-hand "Control" key

    shiftkeys+alt

    the key is to be the "Alt" shift key

    shiftkeys+altgraph

    the key is to be the "Alt Graph" shift key

    shiftkeys+capslock

    the key is to be the "Caps Lock" key

    shiftkeys+shiftlock

    the key is to be the "Shift Lock" key

    shiftkeys+numlock

    the key is to be the "Num Lock" key

    buckybits+systembit

    the key is to be the "Stop" key in SunView; this is normally the L1 key, or the SETUP key on the VT100 keyboard

    buckybits+metabit

    the key is to be the "meta" key. That is, the "Left" or "Right" key on a Sun-2 or Sun-3 keyboard or the "diamond" key on a Sun-4 keyboard

    compose

    the key is to be the "Compose" key

    ctrlq

    on the "VT100" keyboard, the key is to transmit the control-Q character (this would be the entry for the "Q" key in the ctrl table)

    ctrls

    on the "VT100" keyboard, the key is to transmit the control-S character (this would be the entry for the "S" key in the ctrl table)

    noscroll

    on the "VT100" keyboard, the key is to be the "No Scroll" key

    string+uparrow

    the key is to be the "up arrow" key

    string+downarrow

    the key is to be the "down arrow" key

    string+leftarrow

    the key is to be the "left arrow" key

    string+rightarrow

    the key is to be the "right arrow" key

    string+homearrow

    the key is to be the "home" key

    fa_acute

    the key is to be the acute accent "floating accent" key

    fa_cedilla

    the key is to be the cedilla "floating accent" key

    fa_cflex

    the key is to be the circumflex "floating accent" key

    fa_grave

    the key is to be the grave accent "floating accent" key

    fa_tilde

    the key is to be the tilde "floating accent" key

    fa_umlaut

    the key is to be the umlaut "floating accent" key

    nonl

    this is used only in the Num Lock table; the key is not to be affected by the state of Num Lock

    pad0

    the key is to be the "0" key on the numeric keypad

    pad1

    the key is to be the "1" key on the numeric keypad

    pad2

    the key is to be the "2" key on the numeric keypad

    pad3

    the key is to be the "3" key on the numeric keypad

    pad4

    the key is to be the "4" key on the numeric keypad

    pad5

    the key is to be the "5" key on the numeric keypad

    pad6

    the key is to be the "6" key on the numeric keypad

    pad7

    the key is to be the "7" key on the numeric keypad

    pad8

    the key is to be the "8" key on the numeric keypad

    pad9

    the key is to be the "9" key on the numeric keypad

    paddot

    the key is to be the "." key on the numeric keypad

    padenter

    the key is to be the "Enter" key on the numeric keypad

    padplus

    the key is to be the "+" key on the numeric keypad

    padminus

    the key is to be the "-" key on the numeric keypad

    padstar

    the key is to be the "*" key on the numeric keypad

    padslash

    the key is to be the "/" key on the numeric keypad

    padequal

    the key is to be the "=" key on the numeric keypad

    padsep

    the key is to be the "," (separator) key on the numeric keypad

    lf(n)

    the key is to be the left-hand function key n

    rf(n)

    the key is to be the right-hand function key n

    tf(n)

    the key is to be the top function key n

    bf(n)

    the key is to be the "bottom" function key n

    nop

    the key is to do nothing

    error

    this code indicates an internal error; to be used only for keystation 126, and must be used there

    idle

    this code indicates that the keyboard is idle (that is, has no keys down); to be used only for all entries other than the numl and up table entries for keystation 127, and must be used there

    oops

    this key exists, but its action is not defined; it has the same effect as nop

    reset

    this code indicates that the keyboard has just been reset; to be used only for the up table entry for keystation 127, and must be used there.

    swap number1 with number2

    exchanges the entries for keystations number1 and number2.

    key number1 same as number2

    sets the entries for keystation number1 to be the same as those for keystation number2. If the file does not specify entries for keystation number2, the entries currently in the translation table are used; if the file does specify entries for keystation number2, those entries are used.

     

    EXAMPLES

    Example 1 Example of setting multiple keystations.

    The following entry sets keystation 15 to be a "hole" (that is, an entry indicating that there is no keystation 15); sets keystation 30 to do nothing when Alt Graph is down, generate "!" when Shift is down, and generate "1" under all other circumstances; and sets keystation 76 to be the left-hand Control key.

    key 15   all hole
    key 30   base 1 shift ! caps 1 ctrl 1 altg nop
    key 76   all shiftkeys+leftctrl up shiftkeys+leftctrl
    

    Example 2 Exchange DELETE and BACKSPACE keys

    The following entry exchanges the Delete and Back Space keys on the Type 4 keyboard:

    swap 43 with 66
    

    Keystation 43 is normally the Back Space key, and keystation 66 is normally the Delete key.

    Example 3 Disable CAPS LOCK key

    The following entry disables the Caps Lock key on the Type 3 and U.S. Type 4 keyboards:

    key 119 all nop
    

    Example 4 Standard translation tables for the U.S. Type 4 keyboard

    The following specifies the standard translation tables for the U.S. Type 4 keyboard:

    key 0    all hole
    key 1    all buckybits+systembit up buckybits+systembit
    key 2    all hole
    key 3    all lf(2)
    key 4    all hole
    key 5    all tf(1)
    key 6    all tf(2)
    key 7    all tf(10)
    key 8    all tf(3)
    key 9    all tf(11)
    key 10   all tf(4)
    key 11   all tf(12)
    key 12   all tf(5)
    key 13   all shiftkeys+altgraph up shiftkeys+altgraph
    key 14   all tf(6)
    key 15   all hole
    key 16   all tf(7)
    key 17   all tf(8)
    key 18   all tf(9)
    key 19   all shiftkeys+alt up shiftkeys+alt
    key 20   all hole
    key 21   all rf(1)
    key 22   all rf(2)
    key 23   all rf(3)
    key 24   all hole
    key 25   all lf(3)
    key 26   all lf(4)
    key 27   all hole
    key 28   all hole
    key 29   all ^[
    key 30   base 1 shift ! caps 1 ctrl 1 altg nop
    key 31   base 2 shift @ caps 2 ctrl ^@ altg nop
    key 32   base 3 shift # caps 3 ctrl 3 altg nop
    key 33   base 4 shift $ caps 4 ctrl 4 altg nop
    key 34   base 5 shift % caps 5 ctrl 5 altg nop
    key 35   base 6 shift ^ caps 6 ctrl ^^ altg nop
    key 36   base 7 shift & caps 7 ctrl 7 altg nop
    key 37   base 8 shift * caps 8 ctrl 8 altg nop
    key 38   base 9 shift ( caps 9 ctrl 9 altg nop
    key 39   base 0 shift ) caps 0 ctrl 0 altg nop
    key 40   base - shift _ caps - ctrl ^_ altg nop
    key 41   base = shift + caps = ctrl = altg nop
    key 42   base ` shift ~ caps ` ctrl ^^ altg nop
    key 43   all '\b'
    key 44   all hole
    key 45   all rf(4) numl padequal
    key 46   all rf(5) numl padslash
    key 47   all rf(6) numl padstar
    key 48   all bf(13)
    key 49   all lf(5)
    key 50   all bf(10) numl padequal
    key 51   all lf(6)
    key 52   all hole
    key 53   all '\t'
    key 54   base q shift Q caps Q ctrl ^Q altg nop
    key 55   base w shift W caps W ctrl ^W altg nop
    key 56   base e shift E caps E ctrl ^E altg nop
    key 57   base r shift R caps R ctrl ^R altg nop
    key 58   base t shift T caps T ctrl ^T altg nop
    key 59   base y shift Y caps Y ctrl ^Y altg nop
    key 60   base u shift U caps U ctrl ^U altg nop
    key 61   base i shift I caps I ctrl '\t' altg nop
    key 62   base o shift O caps O ctrl ^O altg nop
    key 63   base p shift P caps P ctrl ^P altg nop
    key 64   base [ shift { caps [ ctrl ^[ altg nop
    key 65   base ] shift } caps ] ctrl ^] altg nop
    key 66   all '\177'
    key 67   all compose
    key 68   all rf(7) numl pad7
    key 69   all rf(8) numl pad8
    key 70   all rf(9) numl pad9
    key 71   all bf(15) numl padminus
    key 72   all lf(7)
    key 73   all lf(8)
    key 74   all hole
    key 75   all hole
    key 76   all shiftkeys+leftctrl up shiftkeys+leftctrl
    key 77   base a shift A caps A ctrl ^A altg nop
    key 78   base s shift S caps S ctrl ^S altg nop
    key 79   base d shift D caps D ctrl ^D altg nop
    key 80   base f shift F caps F ctrl ^F altg nop
    key 81   base g shift G caps G ctrl ^G altg nop
    key 82   base h shift H caps H ctrl '\b' altg nop
    key 83   base j shift J caps J ctrl '\n' altg nop
    key 84   base k shift K caps K ctrl '\v' altg nop
    key 85   base l shift L caps L ctrl ^L altg nop
    key 86   base ; shift : caps ; ctrl ; altg nop
    key 87   base '\'' shift '"' caps '\'' ctrl '\'' altg nop
    key 88   base '\\' shift | caps '\\' ctrl ^\ altg nop
    key 89   all '\r'
    key 90   all bf(11) numl padenter
    key 91   all rf(10) numl pad4
    key 92   all rf(11) numl pad5
    key 93   all rf(12) numl pad6
    key 94   all bf(8) numl pad0
    key 95   all lf(9)
    key 96   all hole
    key 97   all lf(10)
    key 98   all shiftkeys+numlock
    key 99   all shiftkeys+leftshift up shiftkeys+leftshift
    key 100  base z shift Z caps Z ctrl ^Z altg nop
    key 101  base x shift X caps X ctrl ^X altg nop
    key 102  base c shift C caps C ctrl ^C altg nop
    key 103  base v shift V caps V ctrl ^V altg nop
    key 104  base b shift B caps B ctrl ^B altg nop
    key 105  base n shift N caps N ctrl ^N altg nop
    key 106  base m shift M caps M ctrl '\r' altg nop
    key 107  base , shift < caps , ctrl , altg nop
    key 108  base . shift > caps . ctrl . altg nop
    key 109  base / shift ? caps / ctrl ^_ altg nop
    key 110  all shiftkeys+rightshift up shiftkeys+rightshift
    key 111  all '\n'
    key 112  all rf(13) numl pad1
    key 113  all rf(14) numl pad2
    key 114  all rf(15) numl pad3
    key 115  all hole
    key 116  all hole
    key 117  all hole
    key 118  all lf(16)
    key 119  all shiftkeys+capslock
    key 120  all buckybits+metabit up buckybits+metabit
    key 121  base ' ' shift ' ' caps ' ' ctrl ^@ altg ' '
    key 122  all buckybits+metabit up buckybits+metabit
    key 123  all hole
    key 124  all hole
    key 125  all bf(14) numl padplus
    key 126  all error numl error up hole
    key 127  all idle numl idle up reset
    

     

    SEE ALSO

    loadkeys(1)


     

    Index

    NAME
    DESCRIPTION
    EXAMPLES
    SEE ALSO


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру