The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

pcf (4)
  • >> pcf (4) ( FreeBSD man: Специальные файлы /dev/* )
  • Ключ pcf обнаружен в базе ключевых слов.

  • BSD mandoc
     

    NAME

    
    
    pcf
    
     - Philips I2C bus controller
    
     
    

    SYNOPSIS

    device pcf

    In /boot/device.hints hint.pcf.0.at=isa hint.pcf.0.port=0x320 hint.pcf.0.irq=5

    For one or more iicbus busses: device iicbus  

    DESCRIPTION

    The pcf driver provides support to the Philips PCF8584 I2C controller for the iicbus(4) system.

    The PCF8584 is an integrated circuit designed in CMOS technology which serves as an interface between most standard parallel-bus microcontrollers/microprocessors and the serial I2C-bus. The PCF8584 provides both master and slave functions. Communication with I2C-bus is carried out on a byte-wise basis using interrupt or polled handshake. It controls all the I2C-bus specific sequences, protocol, arbitration and timing. The PCF8584 allows parallel-bus systems to communicate bidirectionally with the I2C-bus.  

    SEE ALSO

    iicbus(4)  

    HISTORY

    The manual page first appeared in Fx 3.0 .  

    AUTHORS

    This manual page was written by An Nicolas Souchu .


     

    Index

    NAME
    SYNOPSIS
    DESCRIPTION
    SEE ALSO
    HISTORY
    AUTHORS


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру