The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

remove_bh (9)
  • >> remove_bh (9) ( Linux man: Ядро )
  •  

    NAME

    init_bh, remove_bh, mark_bh, disable_bh, enable_bh - split-half interrupt handling
     
    

    SYNOPSIS

    #include <linux/interrupt.h>
    void init_bh(int nr, void (*routine)(void));
    void remove_bh(int nr);
    void mark_bh(int nr);
    void disable_bh(int nr);
    void enable_bh(int nr);
     

    DESCRIPTION

     

    Theory

    Split-half handling is a means of dividing an interrupt handler into two sections, one of which (known as the oqtop half') is time-critical and one of which (the oqbottom half') is not.

    The top half (the handler registered with request_irq(9)) normally moves data between the device and a memory buffer, ensures that the device is in a sane state, and little else. While the top half of a handler is running, the IRQ is question is blocked; if it is a fast interrupt handler (i.e., it has SA_INTERRUPT set), all interrupts are disabled.

    The bottom half does whatever remains to be done. Bottom halves run with interrupts enabled, although a locking mechanism ensures that only one bottom half will be running at a given time. Bottom halves are run by do_bottom_half(), which is called from schedule() and ret_from_sys_call().  

    Usage

    init_bh() installs routine() as bottom half number nr. It operates by adding an entry to the bh_base[] table, and setting the appropriate bit of the bh_mask vector. Rather than specifying a number explicitly, one should add an entry to the anonymous enum in include/linux/interrupt.h.

    remove_bh() removes bottom half number nr from the list of bottom halves. It removes the entry from bh_base[] and clears the appropriate bit of bh_mask.

    mark_bh() requests that the kernel run the specified bottom half at the first available opportunity. This function is normally called from the top half of an interrupt handler. It operates by setting the appropriate bit of the bh_active vector.

    disable_bh() disables bottom half number nr by clearing the appropriate bit of bh_mask. This function also increments bh_mask_count[nr], which is used to ensure that nested calls to disable_bh() must be matched by an equal number of calls to enable_bh().

    enable_bh() enables a bottom half previously disabled by disable_bh(). This function decrements bh_mask_count[nr]. Then, if that value is zero, the specified bottom half is enabled by setting the appropriate bit of bh_mask.  

    RETURN VALUE

    No value is returned.  

    AVAILABILITY

    Linux 2.0+. init_bh() and remove_bh() were not present in older versions on Linux. Under those versions, bh_base[] and bh_mask must be modified by hand.  

    SEE ALSO

    request_irq(9), queue_task(9)

    include/asm*/softirq.h, include/linux/interrupt.h, kernel/softirq.c

    lqKernel Kornerrq in issue 26 of The Linux Journal includes a discussion of split-half interrupts under Linux. An online copy of this article can be found at http://www.ssc.com/lj/issue26/interrupt.html.  

    AUTHOR

    Neil Moore <amethyst@maxwell.ml.org>  

    BUGS

    Only 32 bottom halves are allowed. Increasing this number requires changing the size of bh_base[] and bh_mask_count[] in kernel/softirq.c, and changing bh_active and bh_mask (in the same file) to a larger type. A better solution, however, would be to consolidate multiple bottom halves into a single one by using task queues. See queue_task(9) for details.


     

    Index

    NAME
    SYNOPSIS
    DESCRIPTION
    Theory
    Usage
    RETURN VALUE
    AVAILABILITY
    SEE ALSO
    AUTHOR
    BUGS


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру