The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

tftp (1)
  • tftp (1) ( Solaris man: Команды и прикладные программы пользовательского уровня )
  • >> tftp (1) ( FreeBSD man: Команды и прикладные программы пользовательского уровня )
  • tftp (1) ( Linux man: Команды и прикладные программы пользовательского уровня )
  • Ключ tftp обнаружен в базе ключевых слов.

  • BSD mandoc
     

    NAME

    
    
    tftp
    
     - trivial file transfer program
    
     
    

    SYNOPSIS

    [host [port ] ]  

    DESCRIPTION

    The utility is the user interface to the Internet TFTP (Trivial File Transfer Protocol), which allows users to transfer files to and from a remote machine. The remote host may be specified on the command line, in which case uses host as the default host for future transfers (see the connect command below).  

    COMMANDS

    Once is running, it issues the prompt ``tftp> '' and recognizes the following commands:

    ? command-name ...
    Print help information.

    ascii
    Shorthand for mode ascii

    binary
    Shorthand for mode binary

    connect host [port ]
    Set the host (and optionally port for transfers. Note that the TFTP protocol, unlike the FTP protocol, does not maintain connections between transfers; thus, the connect command does not actually create a connection, but merely remembers what host is to be used for transfers. You do not have to use the connect command; the remote host can be specified as part of the get or put commands.

    get [host : file [localname ] ]
    get [host1 : file1 ] [host2 : file2 ... ] [hostN : fileN ]
    Get one or more files from the remote host. When using the host argument, the host will be used as default host for future transfers. If localname is specified, the file is stored locally as localname otherwise the original filename is used. Note that it is not possible to download two files at a time, only one, three, or more than three files, at a time.

    To specify an IPv6 numeric address for a host, wrap it using square brackets like ``[3ffe:2900:e00c:ffee::1234] : file '' to disambiguate the colons used in the IPv6 address from the colon separating the host and the filename.

    mode transfer-mode
    Set the mode for transfers; transfer-mode may be one of ascii or binary The default is ascii

    put file [[host : remotename ] ]
    put file1 file2 ... fileN [[host : remote-directory ] ]
    Put a file or set of files to the remote host. When remotename is specified, the file is stored remotely as remotename otherwise the original filename is used. If the remote-directory argument is used, the remote host is assumed to be a UNIX machine. To specify an IPv6 numeric address for a host see the example under the get command.

    quit
    Exit . An end of file also exits.

    rexmt retransmission-timeout
    Set the per-packet retransmission timeout, in seconds.

    status
    Show current status.

    timeout total-transmission-timeout
    Set the total transmission timeout, in seconds.

    trace
    Toggle packet tracing.

    verbose
    Toggle verbose mode.

     

    HISTORY

    The command appeared in BSD 4.3  

    BUGS

    Because there is no user-login or validation within the TFTP protocol, the remote site will probably have some sort of file-access restrictions in place. The exact methods are specific to each site and therefore difficult to document here.

    Files larger than 33488896 octets (65535 blocks) cannot be transferred without client and server supporting blocksize negotiation (RFC1783).


     

    Index

    NAME
    SYNOPSIS
    DESCRIPTION
    COMMANDS
    HISTORY
    BUGS


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру