форумы  помощь  поиск  регистрация  майллист  ВХОД  слежка

Вариант для распечатки		Архивированная нить - только для чтения!  Пред. тема | След. тема
Форумы OpenNET: Виртуальная конференция (Public)
Изначальное сообщение		[Проследить за развитием треда]

"OpenBSD 3.2 прописываю в rc.conf named, а он не рабоьает"
Сообщение от Raistlin on 20-Июн-03, 15:21  (MSK)
Помогите, пожалуйста !!!   Сижу под OpenBSD 3.2, в rc.conf прописываю: named_flags="", в комментарии написано так... перзапускаю машину, бзда пишет следующее: starting named named [  ] directory /var/named/ no such file or directory savecore: no core dump и т.д. вхожу под рутом, пишу top ессно named нет, но с консоли запускается, и работает нормально... в rc.conf пробовал менять строку named_chroot=/var/named система выдает какие то ошибки, но потом при входе в систему named работает... что делать ? подскажите, плз...
	Рекомендовать в FAQ | Cообщить модератору | Наверх

Индекс форумов | Темы | Пред. тема | След. тема

Сообщения по теме

1. "OpenBSD 3.2 прописываю в rc.conf named, а он не рабоьает"
Сообщение от Alexey on 20-Июн-03, 15:27  (MSK)
ты дай свой rc.conf лучше, заодно интересно посмотреть как он отличается от FreeBDS rc.conf
	Рекомендовать в FAQ | Cообщить модератору | Наверх

	2. "OpenBSD 3.2 прописываю в rc.conf named, а он не рабоьает"
	Сообщение от Raistlin on 20-Июн-03, 15:31  (MSK)
	>ты дай свой rc.conf лучше, заодно интересно посмотреть как он отличается от >FreeBDS rc.conf               ДЕРЖИ... #!/bin/sh - # # $OpenBSD: rc.conf,v 1.79 2002/09/06 21:30:22 deraadt Exp $ # set these to "NO" to turn them off.  otherwise, they're used as flags routed_flags=NO # for normal use: "-q" altqd_flags=NO # for normal use: "" mrouted_flags=NO # for normal use: "", if activated # be sure to enable multicast_router below. rarpd_flags=NO # for normal use: "-a" bootparamd_flags=NO # for normal use: "" rbootd_flags=NO # for normal use: "" sshd_flags="" # for normal use: "" smtpfwdd_flags=NO # for normal use: ""; be sure to configure smtpd(8) # and sendmail(8) to use MSA only named_flags="" # for normal use: "" rdate_flags=NO # for normal use: [RFC868-host] or [-n RFC1361-host] timed_flags=NO # for normal use: "" ntpdate_flags=NO # for normal use: NTP server; run before ntpd starts isakmpd_flags=NO # for normal use: "" mopd_flags=NO # for normal use: "-a" apmd_flags=NO # for normal use: "" dhcpd_flags=NO # for normal use: "-q" rtadvd_flags=NO # for normal use: list of interfaces # be sure to set net.inet6.ip6.forwarding=1 route6d_flags=NO # for normal use: "" # be sure to set net.inet6.ip6.forwarding=1 rtsold_flags=NO # for normal use: interface # be sure to set net.inet6.ip6.forwarding=0 # be sure to set net.inet6.ip6.accept_rtadv=1 lpd_flags=NO # for normal use: "" (or "-l" for debugging) # use -u to disable chroot, see httpd(8) httpd_flags=NO # for normal use: "" (or "-DSSL" after reading ssl(8)) # For normal use: "-L sm-mta -bd -q30m", and note there is a cron job sendmail_flags="-L sm-mta -C/etc/mail/localhost.cf -bd -q30m" # Set to NO if ftpd is running out of inetd ftpd_flags=NO # for non-inetd use: "-D" # Set to NO if identd is running out of inetd identd_flags=NO # for non-inetd use: "-b -u nobody -elo" # On some architectures, you must also disable console getty in /etc/ttys xdm_flags=NO # for normal use: "" # For enabling console mouse support (i386 architecture only) wsmoused_flags=NO # for ps/2 or usb mice: "", serial: "-p /dev/cua00" # set the following to "YES" to turn them on rwhod=NO nfs_server=NO # see sysctl.conf for nfs client configuration lockd=NO gated=NO amd=NO pf=NO # Packet filter / NAT portmap=NO # Note: inetd(8) rpc services need portmap too inetd=YES # almost always needed check_quotas=YES # NO may be desirable in some YP environments ntpd=YES # run ntpd if it exists krb5_master_kdc=NO # KerberosV master KDC. Run 'info heimdal' for help. krb5_slave_kdc=NO # KerberosV slave KDC. afs=NO # mount and run afs # Multicast routing configuration # Please look at /etc/netstart for a detailed description if you change these multicast_host=NO # Route all multicast packets to a single interface multicast_router=NO # A multicast routing daemon will be run, e.g. mrouted # miscellaneous other flags # only used if the appropriate server is marked YES above savecore_flags= # "-z" to compress gated_flags= ypserv_flags= # E.g. -1 for YP v1, -d for DNS etc yppasswdd_flags= # "-d /etc/yp" if passwd files are in /etc/yp nfsd_flags="-tun 4" # Crank the 4 for a busy NFS fileserver amd_dir=/tmp_mnt # AMD's mount directory amd_master=/etc/amd/master # AMD 'master' map syslogd_flags= # add more flags, ie. "-u -a /chroot/dev/log" named_user=named # Named should not run as root unless necessary named_chroot=/var/named         # Where to chroot named if not empty pf_rules=/etc/pf.conf # Packet filter rules file pflogd_flags= # add more flags, ie. "-s 256" afs_mount_point=/afs # Mountpoint for AFS afs_device=/dev/xfs0 # Device used by afsd afsd_flags=-z # Flags passed to afsd shlib_dirs= # extra directories for ldconfig local_rcconf="/etc/rc.conf.local" [ -f ${local_rcconf} ] && . ${local_rcconf} # Do not edit this line
		Рекомендовать в FAQ | Cообщить модератору | Наверх

	3. "OpenBSD 3.2 прописываю в rc.conf named, а он не рабоьает"
	Сообщение от Raistlin on 20-Июн-03, 15:32  (MSK)
	>ты дай свой rc.conf лучше, заодно интересно посмотреть как он отличается от >FreeBDS rc.conf #!/bin/sh - # # $OpenBSD: rc.conf,v 1.79 2002/09/06 21:30:22 deraadt Exp $ # set these to "NO" to turn them off.  otherwise, they're used as flags routed_flags=NO # for normal use: "-q" altqd_flags=NO # for normal use: "" mrouted_flags=NO # for normal use: "", if activated # be sure to enable multicast_router below. rarpd_flags=NO # for normal use: "-a" bootparamd_flags=NO # for normal use: "" rbootd_flags=NO # for normal use: "" sshd_flags="" # for normal use: "" smtpfwdd_flags=NO # for normal use: ""; be sure to configure smtpd(8) # and sendmail(8) to use MSA only named_flags="" # for normal use: "" rdate_flags=NO # for normal use: [RFC868-host] or [-n RFC1361-host] timed_flags=NO # for normal use: "" ntpdate_flags=NO # for normal use: NTP server; run before ntpd starts isakmpd_flags=NO # for normal use: "" mopd_flags=NO # for normal use: "-a" apmd_flags=NO # for normal use: "" dhcpd_flags=NO # for normal use: "-q" rtadvd_flags=NO # for normal use: list of interfaces # be sure to set net.inet6.ip6.forwarding=1 route6d_flags=NO # for normal use: "" # be sure to set net.inet6.ip6.forwarding=1 rtsold_flags=NO # for normal use: interface # be sure to set net.inet6.ip6.forwarding=0 # be sure to set net.inet6.ip6.accept_rtadv=1 lpd_flags=NO # for normal use: "" (or "-l" for debugging) # use -u to disable chroot, see httpd(8) httpd_flags=NO # for normal use: "" (or "-DSSL" after reading ssl(8)) # For normal use: "-L sm-mta -bd -q30m", and note there is a cron job sendmail_flags="-L sm-mta -C/etc/mail/localhost.cf -bd -q30m" # Set to NO if ftpd is running out of inetd ftpd_flags=NO # for non-inetd use: "-D" # Set to NO if identd is running out of inetd identd_flags=NO # for non-inetd use: "-b -u nobody -elo" # On some architectures, you must also disable console getty in /etc/ttys xdm_flags=NO # for normal use: "" # For enabling console mouse support (i386 architecture only) wsmoused_flags=NO # for ps/2 or usb mice: "", serial: "-p /dev/cua00" # set the following to "YES" to turn them on rwhod=NO nfs_server=NO # see sysctl.conf for nfs client configuration lockd=NO gated=NO amd=NO pf=NO # Packet filter / NAT portmap=NO # Note: inetd(8) rpc services need portmap too inetd=YES # almost always needed check_quotas=YES # NO may be desirable in some YP environments ntpd=YES # run ntpd if it exists krb5_master_kdc=NO # KerberosV master KDC. Run 'info heimdal' for help. krb5_slave_kdc=NO # KerberosV slave KDC. afs=NO # mount and run afs # Multicast routing configuration # Please look at /etc/netstart for a detailed description if you change these multicast_host=NO # Route all multicast packets to a single interface multicast_router=NO # A multicast routing daemon will be run, e.g. mrouted # miscellaneous other flags # only used if the appropriate server is marked YES above savecore_flags= # "-z" to compress gated_flags= ypserv_flags= # E.g. -1 for YP v1, -d for DNS etc yppasswdd_flags= # "-d /etc/yp" if passwd files are in /etc/yp nfsd_flags="-tun 4" # Crank the 4 for a busy NFS fileserver amd_dir=/tmp_mnt # AMD's mount directory amd_master=/etc/amd/master # AMD 'master' map syslogd_flags= # add more flags, ie. "-u -a /chroot/dev/log" named_user=named # Named should not run as root unless necessary named_chroot=/var/named         # Where to chroot named if not empty pf_rules=/etc/pf.conf # Packet filter rules file pflogd_flags= # add more flags, ie. "-s 256" afs_mount_point=/afs # Mountpoint for AFS afs_device=/dev/xfs0 # Device used by afsd afsd_flags=-z # Flags passed to afsd shlib_dirs= # extra directories for ldconfig local_rcconf="/etc/rc.conf.local" [ -f ${local_rcconf} ] && . ${local_rcconf} # Do not edit this line
		Рекомендовать в FAQ | Cообщить модератору | Наверх

	10. "OpenBSD 3.2 прописываю в rc.conf named, а он не рабоьает"
	Сообщение от Alexey on 20-Июн-03, 15:48  (MSK)
	она есть у тебя, этота дириктория?
		Рекомендовать в FAQ | Cообщить модератору | Наверх

	4. "OpenBSD 3.2 прописываю в rc.conf named, а он не рабоьает"
	Сообщение от Raistlin on 20-Июн-03, 15:35  (MSK)
	>ты дай свой rc.conf лучше, заодно интересно посмотреть как он отличается от >FreeBDS rc.conf А может тебе его на мыло швырнуть, а то он в форум не отсылается...
		Рекомендовать в FAQ | Cообщить модератору | Наверх

	5. "OpenBSD 3.2 прописываю в rc.conf named, а он не рабоьает"
	Сообщение от Raistlin on 20-Июн-03, 15:37  (MSK)
	>ты дай свой rc.conf лучше, заодно интересно посмотреть как он отличается от >FreeBDS rc.conf   ДЕРЖИ... #!/bin/sh - # #       $OpenBSD: rc.conf,v 1.79 2002/09/06 21:30:22 deraadt Exp $ # set these to "NO" to turn them off.  otherwise, they're used as flags routed_flags=NO         # for normal use: "-q" altqd_flags=NO          # for normal use: "" mrouted_flags=NO        # for normal use: "", if activated                         # be sure to enable multicast_router below. rarpd_flags=NO          # for normal use: "-a" bootparamd_flags=NO     # for normal use: "" rbootd_flags=NO         # for normal use: "" sshd_flags=""           # for normal use: "" smtpfwdd_flags=NO       # for normal use: ""; be sure to configure smtpd(8)                         # and sendmail(8) to use MSA only named_flags=""          # for normal use: "" rdate_flags=NO          # for normal use: [RFC868-host] or [-n RFC1361-host] timed_flags=NO          # for normal use: "" ntpdate_flags=NO        # for normal use: NTP server; run before ntpd starts isakmpd_flags=NO        # for normal use: "" mopd_flags=NO           # for normal use: "-a" apmd_flags=NO           # for normal use: "" dhcpd_flags=NO          # for normal use: "-q" rtadvd_flags=NO         # for normal use: list of interfaces                         # be sure to set net.inet6.ip6.forwarding=1 route6d_flags=NO        # for normal use: ""                         # be sure to set net.inet6.ip6.forwarding=1 rtsold_flags=NO         # for normal use: interface                         # be sure to set net.inet6.ip6.forwarding=0                         # be sure to set net.inet6.ip6.accept_rtadv=1 lpd_flags=NO            # for normal use: "" (or "-l" for debugging) # use -u to disable chroot, see httpd(8) httpd_flags=NO          # for normal use: "" (or "-DSSL" after reading ssl(8)) # For normal use: "-L sm-mta -bd -q30m", and note there is a cron job sendmail_flags="-L sm-mta -C/etc/mail/localhost.cf -bd -q30m" # Set to NO if ftpd is running out of inetd ftpd_flags=NO           # for non-inetd use: "-D" # Set to NO if identd is running out of inetd identd_flags=NO         # for non-inetd use: "-b -u nobody -elo" # On some architectures, you must also disable console getty in /etc/ttys xdm_flags=NO            # for normal use: "" # For enabling console mouse support (i386 architecture only) wsmoused_flags=NO       # for ps/2 or usb mice: "", serial: "-p /dev/cua00" # set the following to "YES" to turn them on rwhod=NO nfs_server=NO           # see sysctl.conf for nfs client configuration lockd=NO gated=NO amd=NO pf=NO                   # Packet filter / NAT portmap=NO              # Note: inetd(8) rpc services need portmap too inetd=YES               # almost always needed check_quotas=YES        # NO may be desirable in some YP environments ntpd=YES                # run ntpd if it exists krb5_master_kdc=NO      # KerberosV master KDC. Run 'info heimdal' for help. krb5_slave_kdc=NO       # KerberosV slave KDC. afs=NO                  # mount and run afs # Multicast routing configuration # Please look at /etc/netstart for a detailed description if you change these multicast_host=NO       # Route all multicast packets to a single interface multicast_router=NO     # A multicast routing daemon will be run, e.g. mrouted # miscellaneous other flags # only used if the appropriate server is marked YES above savecore_flags=                 # "-z" to compress gated_flags= ypserv_flags=                   # E.g. -1 for YP v1, -d for DNS etc yppasswdd_flags=                # "-d /etc/yp" if passwd files are in /etc/yp nfsd_flags="-tun 4"             # Crank the 4 for a busy NFS fileserver amd_dir=/tmp_mnt                # AMD's mount directory amd_master=/etc/amd/master      # AMD 'master' map syslogd_flags=                  # add more flags, ie. "-u -a /chroot/dev/log" named_user=named                # Named should not run as root unless necessary named_chroot=/var/named         # Where to chroot named if not empty pf_rules=/etc/pf.conf           # Packet filter rules file pflogd_flags=                   # add more flags, ie. "-s 256" afs_mount_point=/afs            # Mountpoint for AFS afs_device=/dev/xfs0            # Device used by afsd afsd_flags=-z                   # Flags passed to afsd shlib_dirs=                     # extra directories for ldconfig local_rcconf="/etc/rc.conf.local" [ -f ${local_rcconf} ] && . ${local_rcconf} # Do not edit this line
		Рекомендовать в FAQ | Cообщить модератору | Наверх

	7. "OpenBSD 3.2 прописываю в rc.conf named, а он не рабоьает"
	Сообщение от Raistlin on 20-Июн-03, 15:37  (MSK)
	ДЕРЖИ... #!/bin/sh - # #       $OpenBSD: rc.conf,v 1.79 2002/09/06 21:30:22 deraadt Exp $ # set these to "NO" to turn them off.  otherwise, they're used as flags routed_flags=NO         # for normal use: "-q" altqd_flags=NO          # for normal use: "" mrouted_flags=NO        # for normal use: "", if activated                         # be sure to enable multicast_router below. rarpd_flags=NO          # for normal use: "-a" bootparamd_flags=NO     # for normal use: "" rbootd_flags=NO         # for normal use: "" sshd_flags=""           # for normal use: "" smtpfwdd_flags=NO       # for normal use: ""; be sure to configure smtpd(8)                         # and sendmail(8) to use MSA only named_flags=""          # for normal use: "" rdate_flags=NO          # for normal use: [RFC868-host] or [-n RFC1361-host] timed_flags=NO          # for normal use: "" ntpdate_flags=NO        # for normal use: NTP server; run before ntpd starts isakmpd_flags=NO        # for normal use: "" mopd_flags=NO           # for normal use: "-a" apmd_flags=NO           # for normal use: "" dhcpd_flags=NO          # for normal use: "-q" rtadvd_flags=NO         # for normal use: list of interfaces                         # be sure to set net.inet6.ip6.forwarding=1 route6d_flags=NO        # for normal use: ""                         # be sure to set net.inet6.ip6.forwarding=1 rtsold_flags=NO         # for normal use: interface                         # be sure to set net.inet6.ip6.forwarding=0                         # be sure to set net.inet6.ip6.accept_rtadv=1 lpd_flags=NO            # for normal use: "" (or "-l" for debugging) # use -u to disable chroot, see httpd(8) httpd_flags=NO          # for normal use: "" (or "-DSSL" after reading ssl(8)) # For normal use: "-L sm-mta -bd -q30m", and note there is a cron job sendmail_flags="-L sm-mta -C/etc/mail/localhost.cf -bd -q30m" # Set to NO if ftpd is running out of inetd ftpd_flags=NO           # for non-inetd use: "-D" # Set to NO if identd is running out of inetd identd_flags=NO         # for non-inetd use: "-b -u nobody -elo" # On some architectures, you must also disable console getty in /etc/ttys xdm_flags=NO            # for normal use: "" # For enabling console mouse support (i386 architecture only) wsmoused_flags=NO       # for ps/2 or usb mice: "", serial: "-p /dev/cua00" # set the following to "YES" to turn them on rwhod=NO nfs_server=NO           # see sysctl.conf for nfs client configuration lockd=NO gated=NO amd=NO pf=NO                   # Packet filter / NAT portmap=NO              # Note: inetd(8) rpc services need portmap too inetd=YES               # almost always needed check_quotas=YES        # NO may be desirable in some YP environments ntpd=YES                # run ntpd if it exists krb5_master_kdc=NO      # KerberosV master KDC. Run 'info heimdal' for help. krb5_slave_kdc=NO       # KerberosV slave KDC. afs=NO                  # mount and run afs # Multicast routing configuration # Please look at /etc/netstart for a detailed description if you change these multicast_host=NO       # Route all multicast packets to a single interface multicast_router=NO     # A multicast routing daemon will be run, e.g. mrouted # miscellaneous other flags # only used if the appropriate server is marked YES above savecore_flags=                 # "-z" to compress gated_flags= ypserv_flags=                   # E.g. -1 for YP v1, -d for DNS etc yppasswdd_flags=                # "-d /etc/yp" if passwd files are in /etc/yp nfsd_flags="-tun 4"             # Crank the 4 for a busy NFS fileserver amd_dir=/tmp_mnt                # AMD's mount directory amd_master=/etc/amd/master      # AMD 'master' map syslogd_flags=                  # add more flags, ie. "-u -a /chroot/dev/log" named_user=named                # Named should not run as root unless necessary named_chroot=/var/named         # Where to chroot named if not empty pf_rules=/etc/pf.conf           # Packet filter rules file pflogd_flags=                   # add more flags, ie. "-s 256" afs_mount_point=/afs            # Mountpoint for AFS afs_device=/dev/xfs0            # Device used by afsd afsd_flags=-z                   # Flags passed to afsd shlib_dirs=                     # extra directories for ldconfig local_rcconf="/etc/rc.conf.local" [ -f ${local_rcconf} ] && . ${local_rcconf} # Do not edit this line
		Рекомендовать в FAQ | Cообщить модератору | Наверх

	8. "OpenBSD 3.2 прописываю в rc.conf named, а он не рабоьает"
	Сообщение от Raistlin on 20-Июн-03, 15:44  (MSK)
	>ты дай свой rc.conf лучше, заодно интересно посмотреть как он отличается от >FreeBDS rc.conf   ДЕРЖИ... #!/bin/sh - # #       $OpenBSD: rc.conf,v 1.79 2002/09/06 21:30:22 deraadt Exp $ # set these to "NO" to turn them off.  otherwise, they're used as flags routed_flags=NO         # for normal use: "-q" altqd_flags=NO          # for normal use: "" mrouted_flags=NO        # for normal use: "", if activated                         # be sure to enable multicast_router below. rarpd_flags=NO          # for normal use: "-a" bootparamd_flags=NO     # for normal use: "" rbootd_flags=NO         # for normal use: "" sshd_flags=""           # for normal use: "" smtpfwdd_flags=NO       # for normal use: ""; be sure to configure smtpd(8)                         # and sendmail(8) to use MSA only named_flags=""          # for normal use: "" rdate_flags=NO          # for normal use: [RFC868-host] or [-n RFC1361-host] timed_flags=NO          # for normal use: "" ntpdate_flags=NO        # for normal use: NTP server; run before ntpd starts isakmpd_flags=NO        # for normal use: "" mopd_flags=NO           # for normal use: "-a" apmd_flags=NO           # for normal use: "" dhcpd_flags=NO          # for normal use: "-q" rtadvd_flags=NO         # for normal use: list of interfaces                         # be sure to set net.inet6.ip6.forwarding=1 route6d_flags=NO        # for normal use: ""                         # be sure to set net.inet6.ip6.forwarding=1 rtsold_flags=NO         # for normal use: interface                         # be sure to set net.inet6.ip6.forwarding=0                         # be sure to set net.inet6.ip6.accept_rtadv=1 lpd_flags=NO            # for normal use: "" (or "-l" for debugging) # use -u to disable chroot, see httpd(8) httpd_flags=NO          # for normal use: "" (or "-DSSL" after reading ssl(8)) # For normal use: "-L sm-mta -bd -q30m", and note there is a cron job sendmail_flags="-L sm-mta -C/etc/mail/localhost.cf -bd -q30m" # Set to NO if ftpd is running out of inetd ftpd_flags=NO           # for non-inetd use: "-D" # Set to NO if identd is running out of inetd identd_flags=NO         # for non-inetd use: "-b -u nobody -elo" # On some architectures, you must also disable console getty in /etc/ttys xdm_flags=NO            # for normal use: "" # For enabling console mouse support (i386 architecture only) wsmoused_flags=NO       # for ps/2 or usb mice: "", serial: "-p /dev/cua00" # set the following to "YES" to turn them on rwhod=NO nfs_server=NO           # see sysctl.conf for nfs client configuration lockd=NO gated=NO amd=NO pf=NO                   # Packet filter / NAT portmap=NO              # Note: inetd(8) rpc services need portmap too inetd=YES               # almost always needed check_quotas=YES        # NO may be desirable in some YP environments ntpd=YES                # run ntpd if it exists krb5_master_kdc=NO      # KerberosV master KDC. Run 'info heimdal' for help. krb5_slave_kdc=NO       # KerberosV slave KDC. afs=NO                  # mount and run afs # Multicast routing configuration # Please look at /etc/netstart for a detailed description if you change these multicast_host=NO       # Route all multicast packets to a single interface multicast_router=NO     # A multicast routing daemon will be run, e.g. mrouted # miscellaneous other flags # only used if the appropriate server is marked YES above savecore_flags=                 # "-z" to compress gated_flags= ypserv_flags=                   # E.g. -1 for YP v1, -d for DNS etc yppasswdd_flags=                # "-d /etc/yp" if passwd files are in /etc/yp nfsd_flags="-tun 4"             # Crank the 4 for a busy NFS fileserver amd_dir=/tmp_mnt                # AMD's mount directory amd_master=/etc/amd/master      # AMD 'master' map syslogd_flags=                  # add more flags, ie. "-u -a /chroot/dev/log" named_user=named                # Named should not run as root unless necessary named_chroot=/var/named         # Where to chroot named if not empty pf_rules=/etc/pf.conf           # Packet filter rules file pflogd_flags=                   # add more flags, ie. "-s 256" afs_mount_point=/afs            # Mountpoint for AFS afs_device=/dev/xfs0            # Device used by afsd afsd_flags=-z                   # Flags passed to afsd shlib_dirs=                     # extra directories for ldconfig local_rcconf="/etc/rc.conf.local" [ -f ${local_rcconf} ] && . ${local_rcconf} # Do not edit this line
		Рекомендовать в FAQ | Cообщить модератору | Наверх

6. "OpenBSD 3.2 прописываю в rc.conf named, а он не рабоьает"
Сообщение от lavr on 20-Июн-03, 15:37  (MSK)
>    Помогите, пожалуйста !!! >  Сижу под OpenBSD 3.2, в rc.conf прописываю: named_flags="", в комментарии >написано так... перзапускаю машину, бзда пишет следующее: >starting named >named [  ] directory /var/named/ no such file or directory >savecore: no core dump >и т.д. >вхожу под рутом, пишу top ессно named нет, >но с консоли запускается, и работает нормально... >в rc.conf пробовал менять строку named_chroot=/var/named >система выдает какие то ошибки, но потом при входе в систему named > >работает... >что делать ? подскажите, плз... изучать /etc/rc или посмотреть: bash-2.05a$ grep named /etc/rc.conf named_flags=""          # for normal use: "" named_user=named                # Named should not run as root unless necessary named_chroot=/var/named         # Where to chroot named if not empty bash-2.05a$ ls -la /var/named total 434 drwxr-xr-x   5 root   wheel     512 Jun 19 14:16 . drwxr-xr-x  24 root   wheel     512 Aug 28  2001 .. drwxr-xr-x   2 root   wheel     512 Jun 19 14:19 dev drwxr-xr-x   2 root   wheel     512 Aug 16  2002 etc -r-xr-xr-x   1 root   bin    204800 Nov 17  2002 named-xfer -rw-r--r--   1 root   wheel    1374 Feb 12 14:49 named.boot -rw-r--r--   1 root   wheel     963 Apr 15  2002 named.boot.orig -rw-r--r--   1 root   wheel      35 Jun 19 14:19 named.pid drwxr-xr-x   3 named  bin       512 Jun 19 14:16 namedb bash-2.05a$ ps -axuww | grep named named    27300  3.8  1.0  7892   312 ??  SNs   Thu02PM   18:14.01 named -t /var/named -u named lavr     16750  0.0  0.7   196   212 p2  S+     3:36PM    0:00.09 grep named root      7408  0.0  0.6   112   188 ??  Ss    Thu02PM    1:22.12 syslogd -a /var/named/dev/log bash-2.05a$ uname -a OpenBSD sunct0 3.1 VVM#1 sparc bash-2.05a$
	Рекомендовать в FAQ | Cообщить модератору | Наверх

9. "OpenBSD 3.2 прописываю в rc.conf named, а он не рабоьает"
Сообщение от Raistlin on 20-Июн-03, 15:45  (MSK)
ДЕРЖИ... #!/bin/sh - # #       $OpenBSD: rc.conf,v 1.79 2002/09/06 21:30:22 deraadt Exp $ # set these to "NO" to turn them off.  otherwise, they're used as flags routed_flags=NO         # for normal use: "-q" altqd_flags=NO          # for normal use: "" mrouted_flags=NO        # for normal use: "", if activated                         # be sure to enable multicast_router below. rarpd_flags=NO          # for normal use: "-a" bootparamd_flags=NO     # for normal use: "" rbootd_flags=NO         # for normal use: "" sshd_flags=""           # for normal use: "" smtpfwdd_flags=NO       # for normal use: ""; be sure to configure smtpd(8)                         # and sendmail(8) to use MSA only named_flags=""          # for normal use: "" rdate_flags=NO          # for normal use: [RFC868-host] or [-n RFC1361-host] timed_flags=NO          # for normal use: "" ntpdate_flags=NO        # for normal use: NTP server; run before ntpd starts isakmpd_flags=NO        # for normal use: "" mopd_flags=NO           # for normal use: "-a" apmd_flags=NO           # for normal use: "" dhcpd_flags=NO          # for normal use: "-q" rtadvd_flags=NO         # for normal use: list of interfaces                         # be sure to set net.inet6.ip6.forwarding=1 route6d_flags=NO        # for normal use: ""                         # be sure to set net.inet6.ip6.forwarding=1 rtsold_flags=NO         # for normal use: interface                         # be sure to set net.inet6.ip6.forwarding=0                         # be sure to set net.inet6.ip6.accept_rtadv=1 lpd_flags=NO            # for normal use: "" (or "-l" for debugging) # use -u to disable chroot, see httpd(8) httpd_flags=NO          # for normal use: "" (or "-DSSL" after reading ssl(8)) # For normal use: "-L sm-mta -bd -q30m", and note there is a cron job sendmail_flags="-L sm-mta -C/etc/mail/localhost.cf -bd -q30m" # Set to NO if ftpd is running out of inetd ftpd_flags=NO           # for non-inetd use: "-D" # Set to NO if identd is running out of inetd identd_flags=NO         # for non-inetd use: "-b -u nobody -elo" # On some architectures, you must also disable console getty in /etc/ttys xdm_flags=NO            # for normal use: "" # For enabling console mouse support (i386 architecture only) wsmoused_flags=NO       # for ps/2 or usb mice: "", serial: "-p /dev/cua00" # set the following to "YES" to turn them on rwhod=NO nfs_server=NO           # see sysctl.conf for nfs client configuration lockd=NO gated=NO amd=NO pf=NO                   # Packet filter / NAT portmap=NO              # Note: inetd(8) rpc services need portmap too inetd=YES               # almost always needed check_quotas=YES        # NO may be desirable in some YP environments ntpd=YES                # run ntpd if it exists krb5_master_kdc=NO      # KerberosV master KDC. Run 'info heimdal' for help. krb5_slave_kdc=NO       # KerberosV slave KDC. afs=NO                  # mount and run afs # Multicast routing configuration # Please look at /etc/netstart for a detailed description if you change these multicast_host=NO       # Route all multicast packets to a single interface multicast_router=NO     # A multicast routing daemon will be run, e.g. mrouted # miscellaneous other flags # only used if the appropriate server is marked YES above savecore_flags=                 # "-z" to compress gated_flags= ypserv_flags=                   # E.g. -1 for YP v1, -d for DNS etc yppasswdd_flags=                # "-d /etc/yp" if passwd files are in /etc/yp nfsd_flags="-tun 4"             # Crank the 4 for a busy NFS fileserver amd_dir=/tmp_mnt                # AMD's mount directory amd_master=/etc/amd/master      # AMD 'master' map syslogd_flags=                  # add more flags, ie. "-u -a /chroot/dev/log" named_user=named                # Named should not run as root unless necessary named_chroot=/var/named         # Where to chroot named if not empty pf_rules=/etc/pf.conf           # Packet filter rules file pflogd_flags=                   # add more flags, ie. "-s 256" afs_mount_point=/afs            # Mountpoint for AFS afs_device=/dev/xfs0            # Device used by afsd afsd_flags=-z                   # Flags passed to afsd shlib_dirs=                     # extra directories for ldconfig local_rcconf="/etc/rc.conf.local" [ -f ${local_rcconf} ] && . ${local_rcconf} # Do not edit this line
	Рекомендовать в FAQ | Cообщить модератору | Наверх

	11. "OpenBSD 3.2 прописываю в rc.conf named, а он не рабоьает"
	Сообщение от Alexey on 20-Июн-03, 15:50  (MSK)
	ну он сюда нашвырялся, твой rc.conf, у тебя ета директория есть? проверь
		Рекомендовать в FAQ | Cообщить модератору | Наверх

	12. "OpenBSD 3.2 прописываю в rc.conf named, а он не рабоьает"
	Сообщение от lavr on 20-Июн-03, 16:03  (MSK)
	>  ДЕРЖИ... > > >#!/bin/sh - ># >#       $OpenBSD: rc.conf,v 1.79 2002/09/06 21:30:22 >deraadt Exp $ <skipped> тпру-у-у, тормози.
		Рекомендовать в FAQ | Cообщить модератору | Наверх

Удалить

Индекс форумов | Темы | Пред. тема | След. тема

Пожалуйста, прежде чем написать сообщение, ознакомьтесь с данными рекомендациями.