форумы  помощь  поиск  регистрация  майллист  ВХОД  слежка

Вариант для распечатки		Пред. тема | След. тема
Форумы OpenNET: Виртуальная конференция (Public)
Изначальное сообщение		[Проследить за развитием треда]

"Vsftpd"
Сообщение от Shurilla on 10-Июн-05, 15:08  (MSK)
Доброго всем времени Народ возникла проблемма поставил Vsftpd а он непускает ни под логином ни анонимно посматрел статью на opennet.ru проде все как также и всеравно не пускает
	Правка | Высказать мнение | Ответить | Рекомендовать в FAQ | Cообщить модератору | Наверх

Индекс форумов | Темы | Пред. тема | След. тема

Сообщения по теме

1. "Vsftpd"
Сообщение от Skif (ok) on 10-Июн-05, 15:21  (MSK)
неплоохо бы конфиг привести, а то что нам делать? телепатить?
Удалить	Правка | Высказать мнение | Ответить | Рекомендовать в FAQ | Cообщить модератору | Наверх

	3. "Vsftpd"
	Сообщение от Shurilla on 10-Июн-05, 17:23  (MSK)
	ну вотон и конфиг Example config file /etc/vsftpd/vsftpd.conf # # The default compiled in settings are fairly paranoid. This sample file # loosens things up a bit, to make the ftp daemon more usable. # Please see vsftpd.conf.5 for all compiled in defaults. # # READ THIS: This example file is NOT an exhaustive list of vsftpd options. # Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's # capabilities. # # Allow anonymous FTP? (Beware - allowed by default if you comment this out). anonymous_enable=YES # # Uncomment this to allow local users to log in. local_enable=YES # # Uncomment this to enable any form of FTP write command. write_enable=YES # # Default umask for local users is 077. You may wish to change this to 022, # if your users expect that (022 is used by most other ftpd's) local_umask=022 # # Uncomment this to allow the anonymous FTP user to upload files. This only # has an effect if the above global write enable is activated. Also, you will # obviously need to create a directory writable by the FTP user. anon_upload_enable=YES # # Uncomment this if you want the anonymous FTP user to be able to create # new directories. anon_mkdir_write_enable=YES # # Activate directory messages - messages given to remote users when they # go into a certain directory. dirmessage_enable=YES # # Activate logging of uploads/downloads. xferlog_enable=YES # # Make sure PORT transfer connections originate from port 20 (ftp-data). connect_from_port_20=YES # # If you want, you can arrange for uploaded anonymous files to be owned by # a different user. Note! Using "root" for uploaded files is not # recommended! #chown_uploads=YES #chown_username=whoever # # You may override where the log file goes if you like. The default is shown # below. #xferlog_file=/var/log/vsftpd.log # # If you want, you can have your log file in standard ftpd xferlog format xferlog_std_format=YES # # You may change the default value for timing out an idle session. #idle_session_timeout=600 # # You may change the default value for timing out a data connection. #data_connection_timeout=120 # # It is recommended that you define on your system a unique user which the # ftp server can use as a totally isolated and unprivileged user. #nopriv_user=ftpsecure # # Enable this and the server will recognise asynchronous ABOR requests. Not # recommended for security (the code is non-trivial). Not enabling it, # however, may confuse older FTP clients. #async_abor_enable=YES # # By default the server will pretend to allow ASCII mode but in fact ignore # the request. Turn on the below options to have the server actually do ASCII # mangling on files when in ASCII mode. # Beware that turning on ascii_download_enable enables malicious remote parties # to consume your I/O resources, by issuing the command "SIZE /big/file" in # ASCII mode. # These ASCII options are split into upload and download because you may wish # to enable ASCII uploads (to prevent uploaded scripts etc. from breaking), # without the DoS risk of SIZE and ASCII downloads. ASCII mangling should be # on the client anyway.. #ascii_upload_enable=YES #ascii_download_enable=YES # # You may fully customise the login banner string: #ftpd_banner=Welcome to blah FTP service. # # You may specify a file of disallowed anonymous e-mail addresses. Apparently # useful for combatting certain DoS attacks. #deny_email_enable=YES # (default follows) #banned_email_file=/etc/vsftpd.banned_emails # # You may specify an explicit list of local users to chroot() to their home # directory. If chroot_local_user is YES, then this list becomes a list of # users to NOT chroot(). #chroot_list_enable=YES # (default follows) #chroot_list_file=/etc/vsftpd.chroot_list # # You may activate the "-R" option to the builtin ls. This is disabled by # default to avoid remote users being able to cause excessive I/O on large # sites. However, some broken FTP clients such as "ncftp" and "mirror" assume # the presence of the "-R" option, so there is a strong case for enabling it. #ls_recurse_enable=YES pam_service_name=vsftpd userlist_enable=YES #enable for standalone mode listen=YES tcp_wrappers=YES
	Удалить	Правка | Высказать мнение | Ответить | Рекомендовать в FAQ | Cообщить модератору | Наверх

	5. "Vsftpd"
	Сообщение от Simps (??) on 10-Июн-05, 19:29  (MSK)
	>ну вотон и конфиг >Example config file /etc/vsftpd/vsftpd.conf ># ># The default compiled in settings are fairly paranoid. This sample file > ># loosens things up a bit, to make the ftp daemon more >usable. ># Please see vsftpd.conf.5 for all compiled in defaults. ># ># READ THIS: This example file is NOT an exhaustive list of >vsftpd options. ># Please read the vsftpd.conf.5 manual page to get a full idea >of vsftpd's ># capabilities. ># ># Allow anonymous FTP? (Beware - allowed by default if you comment >this out). >anonymous_enable=YES ># ># Uncomment this to allow local users to log in. >local_enable=YES ># ># Uncomment this to enable any form of FTP write command. >write_enable=YES ># ># Default umask for local users is 077. You may wish to >change this to 022, ># if your users expect that (022 is used by most other >ftpd's) >local_umask=022 ># ># Uncomment this to allow the anonymous FTP user to upload files. >This only ># has an effect if the above global write enable is activated. >Also, you will ># obviously need to create a directory writable by the FTP user. > >anon_upload_enable=YES ># ># Uncomment this if you want the anonymous FTP user to be >able to create ># new directories. >anon_mkdir_write_enable=YES ># ># Activate directory messages - messages given to remote users when they > ># go into a certain directory. >dirmessage_enable=YES ># ># Activate logging of uploads/downloads. >xferlog_enable=YES ># ># Make sure PORT transfer connections originate from port 20 (ftp-data). >connect_from_port_20=YES ># ># If you want, you can arrange for uploaded anonymous files to >be owned by ># a different user. Note! Using "root" for uploaded files is not > ># recommended! >#chown_uploads=YES >#chown_username=whoever ># ># You may override where the log file goes if you like. >The default is shown ># below. >#xferlog_file=/var/log/vsftpd.log ># ># If you want, you can have your log file in standard >ftpd xferlog format >xferlog_std_format=YES ># ># You may change the default value for timing out an idle >session. >#idle_session_timeout=600 ># ># You may change the default value for timing out a data >connection. >#data_connection_timeout=120 ># ># It is recommended that you define on your system a unique >user which the ># ftp server can use as a totally isolated and unprivileged user. > >#nopriv_user=ftpsecure ># ># Enable this and the server will recognise asynchronous ABOR requests. Not > ># recommended for security (the code is non-trivial). Not enabling it, ># however, may confuse older FTP clients. >#async_abor_enable=YES ># ># By default the server will pretend to allow ASCII mode but >in fact ignore ># the request. Turn on the below options to have the server >actually do ASCII ># mangling on files when in ASCII mode. ># Beware that turning on ascii_download_enable enables malicious remote parties ># to consume your I/O resources, by issuing the command "SIZE /big/file" >in ># ASCII mode. ># These ASCII options are split into upload and download because you >may wish ># to enable ASCII uploads (to prevent uploaded scripts etc. from breaking), > ># without the DoS risk of SIZE and ASCII downloads. ASCII mangling >should be ># on the client anyway.. >#ascii_upload_enable=YES >#ascii_download_enable=YES ># ># You may fully customise the login banner string: >#ftpd_banner=Welcome to blah FTP service. ># ># You may specify a file of disallowed anonymous e-mail addresses. Apparently > ># useful for combatting certain DoS attacks. >#deny_email_enable=YES ># (default follows) >#banned_email_file=/etc/vsftpd.banned_emails ># ># You may specify an explicit list of local users to chroot() >to their home ># directory. If chroot_local_user is YES, then this list becomes a list >of ># users to NOT chroot(). >#chroot_list_enable=YES ># (default follows) >#chroot_list_file=/etc/vsftpd.chroot_list ># ># You may activate the "-R" option to the builtin ls. This >is disabled by ># default to avoid remote users being able to cause excessive I/O >on large ># sites. However, some broken FTP clients such as "ncftp" and "mirror" >assume ># the presence of the "-R" option, so there is a strong >case for enabling it. >#ls_recurse_enable=YES > >pam_service_name=vsftpd >userlist_enable=YES >#enable for standalone mode >listen=YES >tcp_wrappers=YES Почитай http://vsftpd.beasts.org/vsftpd_conf.html про userlist_enable
	Удалить	Правка | Высказать мнение | Ответить | Рекомендовать в FAQ | Cообщить модератору | Наверх

	6. "Vsftpd"
	Сообщение от shurilla on 10-Июн-05, 21:39  (MSK)
	Ок спасибо большое далее думаю разбирусь
	Удалить	Правка | Высказать мнение | Ответить | Рекомендовать в FAQ | Cообщить модератору | Наверх

2. "Vsftpd"
Сообщение от Simps (??) on 10-Июн-05, 15:22  (MSK)
>Доброго всем времени >Народ возникла проблемма поставил Vsftpd а он непускает ни под логином ни >анонимно посматрел статью на opennet.ru проде все как также и всеравно >не пускает Замечательно! Но без логов и конфига тяжело думается
Удалить	Правка | Высказать мнение | Ответить | Рекомендовать в FAQ | Cообщить модератору | Наверх

	4. "Vsftpd"
	Сообщение от shurilla on 10-Июн-05, 17:37  (MSK)
	ну вотон и конфиг Example config file /etc/vsftpd/vsftpd.conf # # The default compiled in settings are fairly paranoid. This sample file # loosens things up a bit, to make the ftp daemon more usable. # Please see vsftpd.conf.5 for all compiled in defaults. # # READ THIS: This example file is NOT an exhaustive list of vsftpd options. # Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's # capabilities. # # Allow anonymous FTP? (Beware - allowed by default if you comment this out). anonymous_enable=YES # # Uncomment this to allow local users to log in. local_enable=YES # # Uncomment this to enable any form of FTP write command. write_enable=YES # # Default umask for local users is 077. You may wish to change this to 022, # if your users expect that (022 is used by most other ftpd's) local_umask=022 # # Uncomment this to allow the anonymous FTP user to upload files. This only # has an effect if the above global write enable is activated. Also, you will # obviously need to create a directory writable by the FTP user. anon_upload_enable=YES # # Uncomment this if you want the anonymous FTP user to be able to create # new directories. anon_mkdir_write_enable=YES # # Activate directory messages - messages given to remote users when they # go into a certain directory. dirmessage_enable=YES # # Activate logging of uploads/downloads. xferlog_enable=YES # # Make sure PORT transfer connections originate from port 20 (ftp-data). connect_from_port_20=YES # # If you want, you can arrange for uploaded anonymous files to be owned by # a different user. Note! Using "root" for uploaded files is not # recommended! #chown_uploads=YES #chown_username=whoever # # You may override where the log file goes if you like. The default is shown # below. #xferlog_file=/var/log/vsftpd.log # # If you want, you can have your log file in standard ftpd xferlog format xferlog_std_format=YES # # You may change the default value for timing out an idle session. #idle_session_timeout=600 # # You may change the default value for timing out a data connection. #data_connection_timeout=120 # # It is recommended that you define on your system a unique user which the # ftp server can use as a totally isolated and unprivileged user. #nopriv_user=ftpsecure # # Enable this and the server will recognise asynchronous ABOR requests. Not # recommended for security (the code is non-trivial). Not enabling it, # however, may confuse older FTP clients. #async_abor_enable=YES # # By default the server will pretend to allow ASCII mode but in fact ignore # the request. Turn on the below options to have the server actually do ASCII # mangling on files when in ASCII mode. # Beware that turning on ascii_download_enable enables malicious remote parties # to consume your I/O resources, by issuing the command "SIZE /big/file" in # ASCII mode. # These ASCII options are split into upload and download because you may wish # to enable ASCII uploads (to prevent uploaded scripts etc. from breaking), # without the DoS risk of SIZE and ASCII downloads. ASCII mangling should be # on the client anyway.. #ascii_upload_enable=YES #ascii_download_enable=YES # # You may fully customise the login banner string: #ftpd_banner=Welcome to blah FTP service. # # You may specify a file of disallowed anonymous e-mail addresses. Apparently # useful for combatting certain DoS attacks. #deny_email_enable=YES # (default follows) #banned_email_file=/etc/vsftpd.banned_emails # # You may specify an explicit list of local users to chroot() to their home # directory. If chroot_local_user is YES, then this list becomes a list of # users to NOT chroot(). #chroot_list_enable=YES # (default follows) #chroot_list_file=/etc/vsftpd.chroot_list # # You may activate the "-R" option to the builtin ls. This is disabled by # default to avoid remote users being able to cause excessive I/O on large # sites. However, some broken FTP clients such as "ncftp" and "mirror" assume # the presence of the "-R" option, so there is a strong case for enabling it. #ls_recurse_enable=YES pam_service_name=vsftpd userlist_enable=YES #enable for standalone mode listen=YES tcp_wrappers=YES
	Удалить	Правка | Высказать мнение | Ответить | Рекомендовать в FAQ | Cообщить модератору | Наверх

Архив | Удалить	Индекс форумов | Темы | Пред. тема | След. тема
Оцените тред (1=ужас, 5=супер)? [ 1 | 2 | 3 | 4 | 5 ]

Пожалуйста, прежде чем написать сообщение, ознакомьтесь с данными рекомендациями.