форумы  помощь  поиск  регистрация  майллист  вход/выход  слежка

Вариант для распечатки		Пред. тема | След. тема
Форумы OpenNET: Виртуальная конференция (Public)
Изначальное сообщение		[ Отслеживать ]

"radiusclient-ng help!"		+/–
Сообщение от Kiryha (ok) on 08-Фев-07, 13:57
Всем привет! Помогите пожалуйста новичку настроить radiusclient-ng При попытке запуска пишет [root@test sbin]# ./radiusclient /usr/local/etc/radiusclient-ng/radiusclient.conf /usr/local/etc/radiusclient-ng/radiusclient.conf: can't parse AV pair Помогите пожалуйста, вопрос буквально жизни и смерти
Высказать мнение | Ответить | Правка | Cообщить модератору

Сообщения по теме

[Сортировка по времени | RSS]

1. "radiusclient-ng help!"		+/–
Сообщение от coyote (ok) on 08-Фев-07, 17:41
>Всем привет! Помогите пожалуйста новичку настроить radiusclient-ng >При попытке запуска пишет >[root@test sbin]# ./radiusclient /usr/local/etc/radiusclient-ng/radiusclient.conf >/usr/local/etc/radiusclient-ng/radiusclient.conf: can't parse AV pair смею предположить либо нет прав на файлик конфигурации, либо файл конфигурации содержит  ошибки. >Помогите пожалуйста, вопрос буквально жизни и смерти
Высказать мнение | Ответить | Правка | Наверх | Cообщить модератору

	2. "radiusclient-ng help!"		+/–
	Сообщение от coyote (ok) on 08-Фев-07, 17:42
	>Всем привет! Помогите пожалуйста новичку настроить radiusclient-ng >При попытке запуска пишет >[root@test sbin]# ./radiusclient /usr/local/etc/radiusclient-ng/radiusclient.conf >/usr/local/etc/radiusclient-ng/radiusclient.conf: can't parse AV pair смею предположить либо нет прав на файлик конфигурации, либо файл конфигурации содержит  ошибки.
	Высказать мнение | Ответить | Правка | Наверх | Cообщить модератору

	3. "radiusclient-ng help!"		+/–
	Сообщение от Kiryha (ok) on 08-Фев-07, 18:18
	>>Всем привет! Помогите пожалуйста новичку настроить radiusclient-ng >>При попытке запуска пишет >>[root@test sbin]# ./radiusclient /usr/local/etc/radiusclient-ng/radiusclient.conf >>/usr/local/etc/radiusclient-ng/radiusclient.conf: can't parse AV pair > >смею предположить либо нет прав на файлик конфигурации, либо файл конфигурации содержит > ошибки. > Права есть, вот сам radiusclient.conf # General settings                                                                                                                                                    # specify which authentication comes first respectively which                       # authentication is used. possible values are: "radius" and "local".               # if you specify "radius,local" then the RADIUS server is asked                     # first then the local one. if only one keyword is specified only                   # this server is asked.                                                             #auth_order     radius,local                                                                                                                                          # maximum login tries a user has                                                   login_tries     4                                                                                                                                                      # timeout for all login tries                                                       # if this time is exceeded the user is kicked out                                   login_timeout   60                                                                                                                                                    # name of the nologin file which when it exists disables logins.                   # it may be extended by the ttyname which will result in                           # a terminal specific lock (e.g. /etc/nologin.ttyS2 will disable                   # logins on /dev/ttyS2)                                                             nologin /etc/nologin                                                                                                                                                  # name of the issue file. it's only display when no username is passed             # on the radlogin command line                                                     issue   /usr/local/etc/radiusclient-ng/issue                                                                                                                          # RADIUS settings                                                                                                                                                      # RADIUS server to use for authentication requests. this config                     # item can appear more then one time. if multiple servers are                       # defined they are tried in a round robin fashion if one                           # server is not answering.                                                         # optionally you can specify a the port number on which is remote                   # RADIUS listens separated by a colon from the hostname. if                         # no port is specified /etc/services is consulted of the radius                     # service. if this fails also a compiled in default is used.                       authserver  192.168.110.4:1812                                                                                                                                        # RADIUS server to use for accouting requests. All that I                           # said for authserver applies, too.                                                 #                                                                                   acctserver      192.168.110.4:1813                                                                                                                                    # file holding shared secrets used for the communication                           # between the RADIUS client and server                                             servers         /usr/local/etc/radiusclient-ng/servers                                                                                                                # dictionary of allowed attributes and values                                       # just like in the normal RADIUS distributions                                     dictionary      /usr/local/etc/radiusclient-ng/dictionary                                                                                                              # program to call for a RADIUS authenticated login                                 login_radius    /usr/local/sbin/login.radius                                                                                                                          # file which holds sequence number for communication with the                       # RADIUS server                                                                     seqfile         /var/run/radius.seq                                                                                                                                    # file which specifies mapping between ttyname and NAS-Port attribute               mapfile         /usr/local/etc/radiusclient-ng/port-id-map                                                                                                            # default authentication realm to append to all usernames if no                     # realm was explicitly specified by the user                                       # the radiusd directly form Livingston doesnt use any realms, so leave             # it blank then                                                                     default_realm                                                                                                                                                          # time to wait for a reply from the RADIUS server                                   radius_timeout  10                                                                                                                                                    # resend request this many times before trying the next server                     radius_retries  3 # local address from which radius packets have to be sent       bindaddr 192.168.110.50                                                                                                          # LOCAL settings                                                                                                                  # program to execute for local login                             # it must support the -f flag for preauthenticated login         login_local     /bin/login Насчёт ошибки, возможно и есть, подскажи плииз, как это дело побороть
	Высказать мнение | Ответить | Правка | Наверх | Cообщить модератору

	4. "radiusclient-ng help!"		+/–
	Сообщение от Kiryha (ok) on 13-Фев-07, 06:33
	>>>Всем привет! Помогите пожалуйста новичку настроить radiusclient-ng >>>При попытке запуска пишет >>>[root@test sbin]# ./radiusclient /usr/local/etc/radiusclient-ng/radiusclient.conf >>>/usr/local/etc/radiusclient-ng/radiusclient.conf: can't parse AV pair >> >>смею предположить либо нет прав на файлик конфигурации, либо файл конфигурации содержит >> ошибки. >> >Права есть, вот сам radiusclient.conf ># General settings > ># specify which authentication comes first respectively which ># authentication is used. possible values are: "radius" and "local". ># if you specify "radius,local" then the RADIUS server is asked ># first then the local one. if only one keyword is specified >only ># this server is asked. >#auth_order     radius,local > ># maximum login tries a user has >login_tries     4 > ># timeout for all login tries ># if this time is exceeded the user is kicked out >login_timeout   60 > ># name of the nologin file which when it exists disables logins. > ># it may be extended by the ttyname which will result in > ># a terminal specific lock (e.g. /etc/nologin.ttyS2 will disable ># logins on /dev/ttyS2) >nologin /etc/nologin > ># name of the issue file. it's only display when no username >is passed ># on the radlogin command line >issue   /usr/local/etc/radiusclient-ng/issue > ># RADIUS settings > ># RADIUS server to use for authentication requests. this config ># item can appear more then one time. if multiple servers are > ># defined they are tried in a round robin fashion if one > ># server is not answering. ># optionally you can specify a the port number on which is >remote ># RADIUS listens separated by a colon from the hostname. if ># no port is specified /etc/services is consulted of the radius ># service. if this fails also a compiled in default is used. > >authserver  192.168.110.4:1812 > ># RADIUS server to use for accouting requests. All that I ># said for authserver applies, too. ># >acctserver      192.168.110.4:1813 > ># file holding shared secrets used for the communication ># between the RADIUS client and server >servers         /usr/local/etc/radiusclient-ng/servers > ># dictionary of allowed attributes and values ># just like in the normal RADIUS distributions >dictionary      /usr/local/etc/radiusclient-ng/dictionary > ># program to call for a RADIUS authenticated login >login_radius    /usr/local/sbin/login.radius > ># file which holds sequence number for communication with the ># RADIUS server >seqfile         /var/run/radius.seq > ># file which specifies mapping between ttyname and NAS-Port attribute >mapfile         /usr/local/etc/radiusclient-ng/port-id-map > ># default authentication realm to append to all usernames if no ># realm was explicitly specified by the user ># the radiusd directly form Livingston doesnt use any realms, so leave > ># it blank then >default_realm > ># time to wait for a reply from the RADIUS server >radius_timeout  10 > ># resend request this many times before trying the next server >radius_retries  3 ># local address from which radius packets have to be sent >bindaddr 192.168.110.50 > ># LOCAL settings > ># program to execute for local login ># it must support the -f flag for preauthenticated login >login_local     /bin/login >Насчёт ошибки, возможно и есть, подскажи плииз, как это дело побороть > Ни у кого нет никаких мыслей?
	Высказать мнение | Ответить | Правка | Наверх | Cообщить модератору

	5. "radiusclient-ng help!"		+/–
	Сообщение от EXA (??) on 14-Май-09, 14:35
	Оно не так кажись запускается usage: radiusclient [-f config_file] [-p nas_port] [-s | [-a] a1=v1 [a2=v2[...[aN=vN]...]]
	Высказать мнение | Ответить | Правка | Наверх | Cообщить модератору

Архив | Удалить	Индекс форумов | Темы | Пред. тема | След. тема
Оцените тред (1=ужас, 5=супер)? [ 1 | 2 | 3 | 4 | 5 ] [Рекомендовать для помещения в FAQ]