The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

форумы  помощь  поиск  регистрация  майллист  ВХОД  слежка  RSS
"нужен IOS на 2621XM+NM-HD-2VE"
Вариант для распечатки  
Пред. тема | След. тема 
Форумы Маршрутизаторы CISCO и др. оборудование. (Public)
Изначальное сообщение [Проследить за развитием треда]

"нужен IOS на 2621XM+NM-HD-2VE" 
Сообщение от SergT emailИскать по авторуВ закладки(ok) on 03-Окт-05, 09:37  (MSK)
циска пишет "UNKNOWN port adapter"

Router#sh ver
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-IPBASE-M), Version 12.3(6c), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Tue 20-Jul-04 05:24 by kellythw
Image text-base: 0x80008098, data-base: 0x80ED06CC

ROM: System Bootstrap, Version 12.2(8r) [cmong 8r], RELEASE SOFTWARE (fc1)

Router uptime is 14 minutes
System returned to ROM by power-on
System image file is "flash:c2600-ipbase-mz.123-6c.bin"

cisco 2621XM (MPC860P) processor (revision 0x301) with 126976K/4096K bytes of memory.
Processor board ID FOC08361M4V (2321644614)
M860 processor: part number 5, mask 2
Channelized E1, Version 1.0.
Bridging software.
X.25 software, Version 3.0.0.
Primary Rate ISDN software, Version 1.1.
2 FastEthernet/IEEE 802.3 interface(s)
2 Channelized E1/PRI port(s)
32K bytes of non-volatile configuration memory.
32768K bytes of processor board System flash (Read/Write)

вставлено
NM-HD-2VE + VIC-4FXS/DID
VWIC-2MFT-E10DI

тут
http://www.cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a0080094fac.shtml
написано что нужен 12.2(15)ZJ, 12.3(4)T

может у кого есть?
или посвежее что
Cisco IOS® Software Feature Set -->> Requires a "Plus" or “IPVOICE” feature set.

  Правка | Высказать мнение | Ответить | Рекомендовать в FAQ | Cообщить модератору | Наверх

 Оглавление

Индекс форумов | Темы | Пред. тема | След. тема
Сообщения по теме

1. "нужен IOS на 2621XM+NM-HD-2VE" 
Сообщение от Myxa emailИскать по авторуВ закладки(ok) on 03-Окт-05, 10:30  (MSK)
хттп://rapidshare.de/files/5396680/c2600-advipservicesk9-mz.124-3.bin.html
  Удалить Правка | Высказать мнение | Ответить | Рекомендовать в FAQ | Cообщить модератору | Наверх

2. "нужен IOS на 2621XM+NM-HD-2VE" 
Сообщение от SergT emailИскать по авторуВ закладки(ok) on 03-Окт-05, 10:56  (MSK)
а подойдет он на мою?
больно размеры большие (28М)
  Удалить Правка | Высказать мнение | Ответить | Рекомендовать в FAQ | Cообщить модератору | Наверх

3. "нужен IOS на 2621XM+NM-HD-2VE" 
Сообщение от SergT emailИскать по авторуВ закладки(ok) on 03-Окт-05, 11:16  (MSK)
завелась
Router#sh ver
Cisco IOS Software, C2600 Software (C2600-ADVIPSERVICESK9-M), Version 12.4(3), RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by Cisco Systems, Inc.
Compiled Fri 22-Jul-05 05:10 by hqluong

ROM: System Bootstrap, Version 12.2(8r) [cmong 8r], RELEASE SOFTWARE (fc1)

Router uptime is 6 minutes
System returned to ROM by reload
System image file is "flash:c2600-advipservicesk9-mz.124-3.bin"


This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

Cisco 2621XM (MPC860P) processor (revision 0x301) with 125986K/5086K bytes of memory.
Processor board ID FOC08361M4V (2321644614)
M860 processor: part number 5, mask 2
2 FastEthernet interfaces
2 Channelized E1/PRI ports
4 Voice FXS interfaces
32K bytes of NVRAM.
32768K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102

Router#
БОЛЬШОЙ THANKS...

  Удалить Правка | Высказать мнение | Ответить | Рекомендовать в FAQ | Cообщить модератору | Наверх

4. "нужен IOS на 2621XM+NM-HD-2VE" 
Сообщение от SergT emailИскать по авторуВ закладки(ok) on 03-Окт-05, 16:49  (MSK)
еще вопросик
все увиделось чудесно, НО..
Router(config-controller)#?
Controller configuration commands:
  channel-group     Specify the timeslots to channel-group mapping for an
                    interface
  clock             Specify the clock source for a DS1 link
  default           Set a command to its defaults
  description       Controller specific description
  detect            Enable detection of loopback request
  exit              Exit from controller configuration mode
  framing           Specify the type of Framing on a E1 link
  guard-timer       Guard timer (0-20) for xcsp calls - timer duration and
                    accept/reject on expiry
  help              Description of the interactive help system
  line-termination  Specify the line termination for E1
  linecode          Specify the line encoding method for a E1 link
  loopback          Put the entire E1 line into loopback
  mode              Configure the controller mode
  no                Negate a command or set its defaults
  shutdown          Shut down a E1 link (send Blue Alarm)
  tdm-group         Configure DS0 group for TDM
----------------------------------------------------------
нет команд
pri-group
ds0-group
  Удалить Правка | Высказать мнение | Ответить | Рекомендовать в FAQ | Cообщить модератору | Наверх


Архив | Удалить

Индекс форумов | Темы | Пред. тема | След. тема
Оцените тред (1=ужас, 5=супер)? [ 1 | 2 | 3 | 4 | 5 ]
Пожалуйста, прежде чем написать сообщение, ознакомьтесь с данными рекомендациями.




Партнёры:
PostgresPro
Inferno Solutions
Hosting by Hoster.ru
Хостинг:

Закладки на сайте
Проследить за страницей
Created 1996-2024 by Maxim Chirkov
Добавить, Поддержать, Вебмастеру