Items preceded with a "*" are only available in the 0.6.4h series driver
videodev.o this is the basic video4linux module, all video drivers (incl. bttv) register themselves here. i2c.o the generic i2c module. It does much of the i2c bus management, all other modules (except videodev.o) use this one insmod args: scan=1 scan the bus for i2c devices verbose=0 shut up i2c i2c_debug=1 for debugging, it sticks the whole (software) i2c bus traffic to the syslog bttv.o the bt848 (grabber chip) driver insmod args: remap=adr remap Bt848 memory to adr<<20 vidmem=base frame buffer address>>20 (of graphic card) triton1=0/1 for Triton1 compatibility Triton1 is automatically recognized but this might also help with other chipsets pll=0/1/2 pll settings 0: don't use PLL 1: 28 MHz crystal installed 2: 35 MHz crystal installed radio=0/1 card supports radio card=n card type 0: Auto-Detect 1: Miro 2: Hauppauge (old bt848 boards) 3: STB 4: Intel 5: Diamond 6: AVerMedia 7: MATRIX Vision MV-Delta 8: FlyVideo 9: TurboTV 10: Hauppauge (new bt878 boards) 11: MIRO PCTV pro 12: Terratec/Vobis TV-Boostar 13: Newer Hauppauge WinCam (bt878) 14: MAXI TV Video PCI2 15: Terratec TerraTV+ 16: Aimslab VHX 17: PXC200 18: AVermedia98 19: FlyVideo98 (newer FlyVideo cards) *20: Zoltrix TV-Max *21: iProTV *22: ADS Technologies Channel Surfer TV *23: Pixelview PlayTV (bt878) *24: Leadtek WinView 601 *25: AVEC Intercapture *26: LifeView FlyKit w/o Tuner *27: Intel Create and Share PCI remap, card, radio and pll accept up to four comma-separted arguments (for multiple boards). The CARD and PLL defines from the Makefile are used as defaults. msp3400.o The driver for the msp34xx sound processor chips. If you have a stereo card, you probably want to insmod this one. insmod args: debug=1/2 print some debug info to the syslog, 2 is more verbose. *tea6300.o The driver for the tea6300 fader chip. If you have a stereo card and the msp3400.o doesn't work, you might want to try this one. This chip is seen on most STB TV/FM cards (usually from Gateway OEM sold surplus on auction sites). insmod args: debug=1 print some debug info to the syslog. *tda8425.o The driver for the tda8425 fader chip. This driver used to be part of bttv.c, so if your sound used to work but does not anymore, try loading this module. insmod args: debug=1 print some debug info to the syslog. *tda9855.o The driver for the tda9855 stereo decoder / audio processor chip. insmod args: debug=1 print some debug info to the syslog. *dpl3518.o Driver for the dpl3518a Dolby Pro Logic Processor insmod args: debug=1 print some debug info to the syslog. tuner.o The tuner driver. You need this unless you want to use only with a camera or external tuner ... insmod args: debug=1 print some debug info to the syslog type=n type of the tuner chip. n as follows: 0: Temic PAL tuner 1: Philips PAL_I tuner 2: Philips NTSC tuner 3: Philips SECAM tuner 4: no tuner 5: Philips PAL tuner 6: Temic NTSC tuner 7: Temic PAL tuner *8: Alps TSBH1 NTSC tuner *9: Alps TSBE1 PAL tuner i2c_chardev.o provides a character device for i2c bus access. Works for 2.1.x only, not compiled by default.
Закладки на сайте
Проследить за страницей
Created 1996-2022 by Maxim Chirkov
Добавить, Поддержать, Вебмастеру