Здравствуйте!
Есть БУ WS-SVC-FWM-1 который не хочет загружаться
Может кто знает что можно сделать :)Возможно нужно обновить прошивку, но как к нему подключиться? :(
Спасибо!
sup720#sh module
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
6 2 Supervisor Engine 720 (Active) WS-SUP720-BASE SAD0810078U
7 6 Firewall Module WS-SVC-FWM-1 SAD090608EV
Mod MAC addresses Hw Fw Sw Status
--- ---------------------------------- ------ ------------ ------------ -------
6 000f.244b.3724 to 000f.244b.3727 3.1 7.7(1) 15.1(2)SY9 Ok
7 0003.3236.0862 to 0003.3236.0869 3.0 7.2(1) mk1c@1.0.77 PwrDown
Mod Sub-Module Model Serial Hw Status
---- --------------------------- ------------------ ----------- ------- -------
6 Policy Feature Card 3 WS-F6K-PFC3A SAD0810088A 2.2 Ok
6 MSFC3 Daughterboard WS-SUP720 SAD081007SW 2.2 Ok
Mod Online Diag Status
---- -------------------
6 Pass
7 Not Applicable
system power redundancy mode = redundant
system power redundancy operationally = non-redundant
system power total = 2331.00 Watts (55.50 Amps @ 42V)
system power used = 630.00 Watts (15.00 Amps @ 42V)
system power available = 1701.00 Watts (40.50 Amps @ 42V)
Power-Capacity PS-Fan Output Oper
PS Type Watts A @42V Status Status State
---- ------------------ ------- ------ ------ ------ -----
1 WS-CAC-2500W 2331.00 55.50 OK OK on
2 none
Pwr-Requested Pwr-Allocated Admin Oper
Slot Card-Type Watts A @42V Watts A @42V State State
---- ------------------ ------- ------ ------- ------ ----- -----
5 (Redundant Sup) - - 315.00 7.50 - -
6 WS-SUP720-BASE 315.00 7.50 315.00 7.50 on on
7 WS-SVC-FWM-1 171.78 4.09 - - on off (Module Failed SCP dnld)
system auxiliary power mode = off
system auxiliary power redundancy operationally = non-redundant
system primary connector power limit = 3780.00 Watts (90.00 Amps @ 42V)
system auxiliary connector power limit = 0 Watt
system primary power used = 630.00 Watts (15.00 Amps @ 42V)
system auxiliary power used = 0 Watt