Интерактивная система просмотра системных руководств (man-ов)
ng_rfc1490 (4)
>> ng_rfc1490 (4) ( FreeBSD man: Специальные файлы /dev/* )
BSD mandoc
NAME
ng_rfc1490
- RFC 1490 netgraph node type
SYNOPSIS
#include <netgraph/ng_rfc1490.h>
DESCRIPTION
The
rfc1490
node type performs protocol encapsulation, de-encapsulation, and
multiplexing according to RFC 1490 (which has since been updated by RFC 2427).
This particular type of encapsulation is often used on top of frame relay
DLCI channels.
The
downstream
hook is used to transmit and receive encapsulated frames.
On the other side of the node, the
inet
and
ppp
hooks are used to transmit and receive raw IP frames and PPP frames,
respectively.
PPP frames are transmitted and received according to
RFC 1973; in particular, frames appearing on the
ppp
hook begin with the PPP protocol number.
The
ethernet
hook can be used to transmit and receive Ethernet frames (without a
checksum) in RFC 1490's bridging format.
Typically the
inet
hook is connected to the
inet
hook of an
ng_iface4
node.
HOOKS
This node type supports the following hooks:
downstream
Connects to the RFC 1490 peer entity.
ethernet
Transmits and receives bridged raw Ethernet frames, without a checksum.
inet
Transmits and receives raw IP frames.
ppp
Transmits and receives PPP frames.
CONTROL MESSAGES
This node type supports the generic control messages, plus the following:
NGM_RFC1490_SETENCAP
This command sets encapsulation method for the node.
The desired method must be passed as a string message argument,
and must be one of the following supported encapsulation modes:
Qq ietf-ip
IP packets are sent using simple RFC1490/2427 encapsulation.
Qq ietf-snap
IP packets are sent inside SNAP frames.
Also conforms to RFC1490/2427.
Qq cisco
IP packets are sent and received using proprietary Cisco encapsulation
method.
NGM_RFC1490_GETENCAP
This command returns current encapsulation method on the node.
SHUTDOWN
This node shuts down upon receipt of a
NGM_SHUTDOWN
control message, or when all hooks have been disconnected.
