The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

pf (4)
  • >> pf (4) ( FreeBSD man: Специальные файлы /dev/* )
  • Ключ pf обнаружен в базе ключевых слов.

  • BSD mandoc
     

    NAME

    
    
    pf
    
     - packet filter
    
     
    

    SYNOPSIS

    device pf  

    DESCRIPTION

    Packet filtering takes place in the kernel. A pseudo-device, /dev/pf allows userland processes to control the behavior of the packet filter through an ioctl(2) interface. There are commands to enable and disable the filter, load rulesets, add and remove individual rules or state table entries, and retrieve statistics. The most commonly used functions are covered by pfctl(8).

    Manipulations like loading a ruleset that involve more than a single ioctl(2) call require a so-called ticket which prevents the occurrence of multiple concurrent manipulations.

    Fields of ioctl(2) parameter structures that refer to packet data (like addresses and ports) are generally expected in network byte-order.

    Rules and address tables are contained in so-called anchors When servicing an ioctl(2) request, if the anchor field of the argument structure is empty, the kernel will use the default anchor (i.e., the main ruleset) in operations. Anchors are specified by name and may be nested, with components separated by `/' characters, similar to how file system hierarchies are laid out. The final component of the anchor path is the anchor under which operations will be performed.  

    IOCTL INTERFACE

    supports the following ioctl(2) commands, available through Aq Pa net/pfvar.h :

    DIOCSTART
    Start the packet filter.
    DIOCSTOP
    Stop the packet filter.
    DIOCSTARTALTQ
    Start the ALTQ bandwidth control system (see altq(9)).
    DIOCSTOPALTQ
    Stop the ALTQ bandwidth control system.
    DIOCBEGINADDRS Fa struct pfioc_pooladdr *pp
    struct pfioc_pooladdr {
            u_int32_t               action;
            u_int32_t               ticket;
            u_int32_t               nr;
            u_int32_t               r_num;
            u_int8_t                r_action;
            u_int8_t                r_last;
            u_int8_t                af;
            char                    anchor[MAXPATHLEN];
            struct pf_pooladdr      addr;
    };
    

    Clear the buffer address pool and get a ticket for subsequent DIOCADDADDR DIOCADDRULE and DIOCCHANGERULE calls.

    DIOCADDADDR Fa struct pfioc_pooladdr *pp

    Add the pool address addr to the buffer address pool to be used in the following DIOCADDRULE or DIOCCHANGERULE call. All other members of the structure are ignored.

    DIOCADDRULE Fa struct pfioc_rule *pr
    struct pfioc_rule {
            u_int32_t       action;
            u_int32_t       ticket;
            u_int32_t       pool_ticket;
            u_int32_t       nr;
            char            anchor[MAXPATHLEN];
            char            anchor_call[MAXPATHLEN];
            struct pf_rule  rule;
    };
    

    Add rule at the end of the inactive ruleset. This call requires a ticket obtained through a preceding DIOCXBEGIN call and a pool_ticket obtained through a DIOCBEGINADDRS call. DIOCADDADDR must also be called if any pool addresses are required. The optional anchor name indicates the anchor in which to append the rule. nr and action are ignored.

    DIOCADDALTQ Fa struct pfioc_altq *pa
    Add an ALTQ discipline or queue.
    struct pfioc_altq {
            u_int32_t       action;
            u_int32_t       ticket;
            u_int32_t       nr;
            struct pf_altq  altq;
    };
    
    DIOCGETRULES Fa struct pfioc_rule *pr
    Get a ticket for subsequent DIOCGETRULE calls and the number nr of rules in the active ruleset.
    DIOCGETRULE Fa struct pfioc_rule *pr
    Get a rule by its number nr using the ticket obtained through a preceding DIOCGETRULES call. If action is set to PF_GET_CLR_CNTR the per-rule statistics on the requested rule are cleared.
    DIOCGETADDRS Fa struct pfioc_pooladdr *pp
    Get a ticket for subsequent DIOCGETADDR calls and the number nr of pool addresses in the rule specified with r_action r_num and anchor
    DIOCGETADDR Fa struct pfioc_pooladdr *pp
    Get the pool address addr by its number nr from the rule specified with r_action r_num and anchor using the ticket obtained through a preceding DIOCGETADDRS call.
    DIOCGETALTQS Fa struct pfioc_altq *pa
    Get a ticket for subsequent DIOCGETALTQ calls and the number nr of queues in the active list.
    DIOCGETALTQ Fa struct pfioc_altq *pa
    Get the queueing discipline altq by its number nr using the ticket obtained through a preceding DIOCGETALTQS call.
    DIOCGETQSTATS Fa struct pfioc_qstats *pq
    Get the statistics on a queue.
    struct pfioc_qstats {
            u_int32_t        ticket;
            u_int32_t        nr;
            void            *buf;
            int              nbytes;
            u_int8_t         scheduler;
    };
    

    This call fills in a pointer to the buffer of statistics buf of length nbytes for the queue specified by nr

    DIOCGETRULESETS Fa struct pfioc_ruleset *pr
    struct pfioc_ruleset {
            u_int32_t        nr;
            char             path[MAXPATHLEN];
            char             name[PF_ANCHOR_NAME_SIZE];
    };
    

    Get the number nr of rulesets (i.e., anchors) directly attached to the anchor named by path for use in subsequent DIOCGETRULESET calls. Nested anchors, since they are not directly attached to the given anchor, will not be included. This ioctl returns Er EINVAL if the given anchor does not exist.

    DIOCGETRULESET Fa struct pfioc_ruleset *pr
    Get a ruleset (i.e., an anchor) name by its number nr from the given anchor path the maximum number of which can be obtained from a preceding DIOCGETRULESETS call. This ioctl returns Er EINVAL if the given anchor does not exist or Er EBUSY if another process is concurrently updating a ruleset.
    DIOCADDSTATE Fa struct pfioc_state *ps
    Add a state entry.
    struct pfioc_state {
            u_int32_t        nr;
            struct pf_state  state;
    };
    
    DIOCGETSTATE Fa struct pfioc_state *ps
    Extract the entry with the specified number nr from the state table.
    DIOCKILLSTATES Fa struct pfioc_state_kill *psk
    Remove matching entries from the state table. This ioctl returns the number of killed states in psk_af
    struct pfioc_state_kill {
            sa_family_t             psk_af;
            int                     psk_proto;
            struct pf_rule_addr     psk_src;
            struct pf_rule_addr     psk_dst;
            char                    psk_ifname[IFNAMSIZ];
    };
    
    DIOCCLRSTATES Fa struct pfioc_state_kill *psk
    Clear all states. It works like DIOCKILLSTATES but ignores the psk_af psk_proto psk_src and psk_dst fields of the Vt pfioc_state_kill structure.
    DIOCSETSTATUSIF Fa struct pfioc_if *pi
    Specify the interface for which statistics are accumulated.
    struct pfioc_if {
            char             ifname[IFNAMSIZ];
    };
    
    DIOCGETSTATUS Fa struct pf_status *s
    Get the internal packet filter statistics.
    struct pf_status {
            u_int64_t       counters[PFRES_MAX];
            u_int64_t       lcounters[LCNT_MAX];
            u_int64_t       fcounters[FCNT_MAX];
            u_int64_t       scounters[SCNT_MAX];
            u_int64_t       pcounters[2][2][3];
            u_int64_t       bcounters[2][2];
            u_int64_t       stateid;
            u_int32_t       running;
            u_int32_t       states;
            u_int32_t       src_nodes;
            u_int32_t       since;
            u_int32_t       debug;
            u_int32_t       hostid;
            char            ifname[IFNAMSIZ];
            u_int8_t        pf_chksum[MD5_DIGEST_LENGTH];
    };
    
    DIOCCLRSTATUS
    Clear the internal packet filter statistics.
    DIOCNATLOOK Fa struct pfioc_natlook *pnl
    Look up a state table entry by source and destination addresses and ports.
    struct pfioc_natlook {
            struct pf_addr   saddr;
            struct pf_addr   daddr;
            struct pf_addr   rsaddr;
            struct pf_addr   rdaddr;
            u_int16_t        sport;
            u_int16_t        dport;
            u_int16_t        rsport;
            u_int16_t        rdport;
            sa_family_t      af;
            u_int8_t         proto;
            u_int8_t         direction;
    };
    
    DIOCSETDEBUG Fa u_int32_t *level
    Set the debug level.
    enum    { PF_DEBUG_NONE, PF_DEBUG_URGENT, PF_DEBUG_MISC,
              PF_DEBUG_NOISY };
    
    DIOCGETSTATES Fa struct pfioc_states *ps
    Get state table entries.
    struct pfioc_states {
            int     ps_len;
            union {
                    caddr_t          psu_buf;
                    struct pf_state *psu_states;
            } ps_u;
    #define ps_buf          ps_u.psu_buf
    #define ps_states       ps_u.psu_states
    };
    

    If ps_len is non-zero on entry, as many states as possible that can fit into this size will be copied into the supplied buffer ps_states On exit, ps_len is always set to the total size required to hold all state table entries (i.e., it is set to sizeof(struct pf_state) * nr )

    DIOCCHANGERULE Fa struct pfioc_rule *pcr
    Add or remove the rule in the ruleset specified by rule.action

    The type of operation to be performed is indicated by action which can be any of the following:

    enum    { PF_CHANGE_NONE, PF_CHANGE_ADD_HEAD, PF_CHANGE_ADD_TAIL,
              PF_CHANGE_ADD_BEFORE, PF_CHANGE_ADD_AFTER,
              PF_CHANGE_REMOVE, PF_CHANGE_GET_TICKET };
    

    ticket must be set to the value obtained with PF_CHANGE_GET_TICKET for all actions except PF_CHANGE_GET_TICKET pool_ticket must be set to the value obtained with the DIOCBEGINADDRS call for all actions except PF_CHANGE_REMOVE and PF_CHANGE_GET_TICKET anchor indicates to which anchor the operation applies. nr indicates the rule number against which PF_CHANGE_ADD_BEFORE PF_CHANGE_ADD_AFTER or PF_CHANGE_REMOVE actions are applied.

    DIOCCHANGEADDR Fa struct pfioc_pooladdr *pca
    Add or remove the pool address addr from the rule specified by r_action r_num and anchor
    DIOCSETTIMEOUT Fa struct pfioc_tm *pt
    struct pfioc_tm {
            int              timeout;
            int              seconds;
    };
    

    Set the state timeout of timeout to seconds The old value will be placed into seconds For possible values of timeout consult the PFTM_* values in Aq Pa net/pfvar.h .

    DIOCGETTIMEOUT Fa struct pfioc_tm *pt
    Get the state timeout of timeout The value will be placed into the seconds field.
    DIOCCLRRULECTRS
    Clear per-rule statistics.
    DIOCSETLIMIT Fa struct pfioc_limit *pl
    Set the hard limits on the memory pools used by the packet filter.
    struct pfioc_limit {
            int             index;
            unsigned        limit;
    };
    
    enum    { PF_LIMIT_STATES, PF_LIMIT_SRC_NODES, PF_LIMIT_FRAGS,
              PF_LIMIT_TABLES, PF_LIMIT_TABLE_ENTRIES, PF_LIMIT_MAX };
    
    DIOCGETLIMIT Fa struct pfioc_limit *pl
    Get the hard limit for the memory pool indicated by index
    DIOCRCLRTABLES Fa struct pfioc_table *io
    Clear all tables. All the ioctls that manipulate radix tables use the same structure described below. For DIOCRCLRTABLES pfrio_ndel contains on exit the number of tables deleted.
    struct pfioc_table {
            struct pfr_table         pfrio_table;
            void                    *pfrio_buffer;
            int                      pfrio_esize;
            int                      pfrio_size;
            int                      pfrio_size2;
            int                      pfrio_nadd;
            int                      pfrio_ndel;
            int                      pfrio_nchange;
            int                      pfrio_flags;
            u_int32_t                pfrio_ticket;
    };
    #define pfrio_exists    pfrio_nadd
    #define pfrio_nzero     pfrio_nadd
    #define pfrio_nmatch    pfrio_nadd
    #define pfrio_naddr     pfrio_size2
    #define pfrio_setflag   pfrio_size2
    #define pfrio_clrflag   pfrio_nadd
    
    DIOCRADDTABLES Fa struct pfioc_table *io
    Create one or more tables. On entry, pfrio_buffer must point to an array of Vt struct pfr_table containing at least Vt pfrio_size elements. Vt pfrio_esize must be the size of Vt struct pfr_table . On exit, pfrio_nadd contains the number of tables effectively created.
    struct pfr_table {
            char            pfrt_anchor[MAXPATHLEN];
            char            pfrt_name[PF_TABLE_NAME_SIZE];
            u_int32_t       pfrt_flags;
            u_int8_t        pfrt_fback;
    };
    
    DIOCRDELTABLES Fa struct pfioc_table *io
    Delete one or more tables. On entry, pfrio_buffer must point to an array of Vt struct pfr_table containing at least Vt pfrio_size elements. Vt pfrio_esize must be the size of Vt struct pfr_table . On exit, pfrio_ndel contains the number of tables effectively deleted.
    DIOCRGETTABLES Fa struct pfioc_table *io
    Get the list of all tables. On entry, pfrio_buffer[pfrio_size] contains a valid writeable buffer for Vt pfr_table structures. On exit, pfrio_size contains the number of tables written into the buffer. If the buffer is too small, the kernel does not store anything but just returns the required buffer size, without error.
    DIOCRGETTSTATS Fa struct pfioc_table *io
    This call is like DIOCRGETTABLES but is used to get an array of Vt pfr_tstats structures.
    struct pfr_tstats {
            struct pfr_table pfrts_t;
            u_int64_t        pfrts_packets
                                 [PFR_DIR_MAX][PFR_OP_TABLE_MAX];
            u_int64_t        pfrts_bytes
                                 [PFR_DIR_MAX][PFR_OP_TABLE_MAX];
            u_int64_t        pfrts_match;
            u_int64_t        pfrts_nomatch;
            long             pfrts_tzero;
            int              pfrts_cnt;
            int              pfrts_refcnt[PFR_REFCNT_MAX];
    };
    #define pfrts_name       pfrts_t.pfrt_name
    #define pfrts_flags      pfrts_t.pfrt_flags
    
    DIOCRCLRTSTATS Fa struct pfioc_table *io
    Clear the statistics of one or more tables. On entry, pfrio_buffer must point to an array of Vt struct pfr_table containing at least Vt pfrio_size elements. Vt pfrio_esize must be the size of Vt struct pfr_table . On exit, pfrio_nzero contains the number of tables effectively cleared.
    DIOCRCLRADDRS Fa struct pfioc_table *io
    Clear all addresses in a table. On entry, pfrio_table contains the table to clear. On exit, pfrio_ndel contains the number of addresses removed.
    DIOCRADDADDRS Fa struct pfioc_table *io
    Add one or more addresses to a table. On entry, pfrio_table contains the table ID and pfrio_buffer must point to an array of Vt struct pfr_addr containing at least Vt pfrio_size elements to add to the table. Vt pfrio_esize must be the size of Vt struct pfr_addr . On exit, pfrio_nadd contains the number of addresses effectively added.
    struct pfr_addr {
            union {
                    struct in_addr   _pfra_ip4addr;
                    struct in6_addr  _pfra_ip6addr;
            }                pfra_u;
            u_int8_t         pfra_af;
            u_int8_t         pfra_net;
            u_int8_t         pfra_not;
            u_int8_t         pfra_fback;
    };
    #define pfra_ip4addr    pfra_u._pfra_ip4addr
    #define pfra_ip6addr    pfra_u._pfra_ip6addr
    
    DIOCRDELADDRS Fa struct pfioc_table *io
    Delete one or more addresses from a table. On entry, pfrio_table contains the table ID and pfrio_buffer must point to an array of Vt struct pfr_addr containing at least Vt pfrio_size elements to delete from the table. Vt pfrio_esize must be the size of Vt struct pfr_addr . On exit, pfrio_ndel contains the number of addresses effectively deleted.
    DIOCRSETADDRS Fa struct pfioc_table *io
    Replace the content of a table by a new address list. This is the most complicated command, which uses all the structure members.

    On entry, pfrio_table contains the table ID and pfrio_buffer must point to an array of Vt struct pfr_addr containing at least Vt pfrio_size elements which become the new contents of the table. Vt pfrio_esize must be the size of Vt struct pfr_addr . Additionally, if pfrio_size2 is non-zero, pfrio_buffer[pfrio_size..pfrio_size2] must be a writeable buffer, into which the kernel can copy the addresses that have been deleted during the replace operation. On exit, pfrio_ndel pfrio_nadd and pfrio_nchange contain the number of addresses deleted, added, and changed by the kernel. If pfrio_size2 was set on entry, pfrio_size2 will point to the size of the buffer used, exactly like DIOCRGETADDRS

    DIOCRGETADDRS Fa struct pfioc_table *io
    Get all the addresses of a table. On entry, pfrio_table contains the table ID and pfrio_buffer[pfrio_size] contains a valid writeable buffer for Vt pfr_addr structures. On exit, pfrio_size contains the number of addresses written into the buffer. If the buffer was too small, the kernel does not store anything but just returns the required buffer size, without returning an error.
    DIOCRGETASTATS Fa struct pfioc_table *io
    This call is like DIOCRGETADDRS but is used to get an array of Vt pfr_astats structures.
    struct pfr_astats {
            struct pfr_addr  pfras_a;
            u_int64_t        pfras_packets
                                 [PFR_DIR_MAX][PFR_OP_ADDR_MAX];
            u_int64_t        pfras_bytes
                                 [PFR_DIR_MAX][PFR_OP_ADDR_MAX];
            long             pfras_tzero;
    };
    
    DIOCRCLRASTATS Fa struct pfioc_table *io
    Clear the statistics of one or more addresses. On entry, pfrio_table contains the table ID and pfrio_buffer must point to an array of Vt struct pfr_addr containing at least Vt pfrio_size elements to be cleared from the table. Vt pfrio_esize must be the size of Vt struct pfr_addr . On exit, pfrio_nzero contains the number of addresses effectively cleared.
    DIOCRTSTADDRS Fa struct pfioc_table *io
    Test if the given addresses match a table. On entry, pfrio_table contains the table ID and pfrio_buffer must point to an array of Vt struct pfr_addr containing at least Vt pfrio_size elements, each of which will be tested for a match in the table. Vt pfrio_esize must be the size of Vt struct pfr_addr . On exit, the kernel updates the Vt pfr_addr array by setting the pfra_fback member appropriately.
    DIOCRSETTFLAGS Fa struct pfioc_table *io
    Change the PFR_TFLAG_CONST or PFR_TFLAG_PERSIST flags of a table. On entry, pfrio_buffer must point to an array of Vt struct pfr_table containing at least Vt pfrio_size elements. pfrio_esize must be the size of Vt struct pfr_table . pfrio_setflag must contain the flags to add, while pfrio_clrflag must contain the flags to remove. On exit, pfrio_nchange and pfrio_ndel contain the number of tables altered or deleted by the kernel. Yes, tables can be deleted if one removes the PFR_TFLAG_PERSIST flag of an unreferenced table.
    DIOCRINADEFINE Fa struct pfioc_table *io
    Defines a table in the inactive set. On entry, pfrio_table contains the table ID and pfrio_buffer[pfrio_size] contains an array of Vt pfr_addr structures to put in the table. A valid ticket must also be supplied to pfrio_ticket On exit, pfrio_nadd contains 0 if the table was already defined in the inactive list or 1 if a new table has been created. pfrio_naddr contains the number of addresses effectively put in the table.
    DIOCXBEGIN Fa struct pfioc_trans *io
    struct pfioc_trans {
            int              size;  /* number of elements */
            int              esize; /* size of each element in bytes */
            struct pfioc_trans_e {
                    int             rs_num;
                    char            anchor[MAXPATHLEN];
                    u_int32_t       ticket;
            }               *array;
    };
    

    Clear all the inactive rulesets specified in the Vt pfioc_trans_e array. For each ruleset, a ticket is returned for subsequent "add rule" ioctls, as well as for the DIOCXCOMMIT and DIOCXROLLBACK calls.

    Ruleset types, identified by rs_num include the following:

    PF_RULESET_SCRUB
    Scrub (packet normalization) rules.
    PF_RULESET_FILTER
    Filter rules.
    PF_RULESET_NAT
    NAT (Network Address Translation) rules.
    PF_RULESET_BINAT
    Bidirectional NAT rules.
    PF_RULESET_RDR
    Redirect rules.
    PF_RULESET_ALTQ
    ALTQ disciplines.
    PF_RULESET_TABLE
    Address tables.

    DIOCXCOMMIT Fa struct pfioc_trans *io
    Atomically switch a vector of inactive rulesets to the active rulesets. This call is implemented as a standard two-phase commit, which will either fail for all rulesets or completely succeed. All tickets need to be valid. This ioctl returns Er EBUSY if another process is concurrently updating some of the same rulesets.
    DIOCXROLLBACK Fa struct pfioc_trans *io
    Clean up the kernel by undoing all changes that have taken place on the inactive rulesets since the last DIOCXBEGIN DIOCXROLLBACK will silently ignore rulesets for which the ticket is invalid.
    DIOCSETHOSTID Fa u_int32_t *hostid
    Set the host ID, which is used by pfsync(4) to identify which host created state table entries.
    DIOCOSFPFLUSH
    Flush the passive OS fingerprint table.
    DIOCOSFPADD Fa struct pf_osfp_ioctl *io
    struct pf_osfp_ioctl {
            struct pf_osfp_entry {
                    SLIST_ENTRY(pf_osfp_entry) fp_entry;
                    pf_osfp_t               fp_os;
                    char                    fp_class_nm[PF_OSFP_LEN];
                    char                    fp_version_nm[PF_OSFP_LEN];
                    char                    fp_subtype_nm[PF_OSFP_LEN];
            }                       fp_os;
            pf_tcpopts_t            fp_tcpopts;
            u_int16_t               fp_wsize;
            u_int16_t               fp_psize;
            u_int16_t               fp_mss;
            u_int16_t               fp_flags;
            u_int8_t                fp_optcnt;
            u_int8_t                fp_wscale;
            u_int8_t                fp_ttl;
            int                     fp_getnum;
    };
    

    Add a passive OS fingerprint to the table. Set fp_os.fp_os to the packed fingerprint, fp_os.fp_class_nm to the name of the class (Linux, Windows, etc), fp_os.fp_version_nm to the name of the version (NT, 95, 98), and fp_os.fp_subtype_nm to the name of the subtype or patchlevel. The members fp_mss fp_wsize fp_psize fp_ttl fp_optcnt and fp_wscale are set to the TCP MSS, the TCP window size, the IP length, the IP TTL, the number of TCP options, and the TCP window scaling constant of the TCP SYN packet, respectively.

    The fp_flags member is filled according to the Aq Pa net/pfvar.h include file PF_OSFP_* defines. The fp_tcpopts member contains packed TCP options. Each option uses PF_OSFP_TCPOPT_BITS bits in the packed value. Options include any of PF_OSFP_TCPOPT_NOP PF_OSFP_TCPOPT_SACK PF_OSFP_TCPOPT_WSCALE PF_OSFP_TCPOPT_MSS or PF_OSFP_TCPOPT_TS

    The fp_getnum member is not used with this ioctl.

    The structure's slack space must be zeroed for correct operation; memset(3) the whole structure to zero before filling and sending to the kernel.

    DIOCOSFPGET Fa struct pf_osfp_ioctl *io
    Get the passive OS fingerprint number fp_getnum from the kernel's fingerprint list. The rest of the structure members will come back filled. Get the whole list by repeatedly incrementing the fp_getnum number until the ioctl returns Er EBUSY .
    DIOCGETSRCNODES Fa struct pfioc_src_nodes *psn
    struct pfioc_src_nodes {
            int     psn_len;
            union {
                    caddr_t         psu_buf;
                    struct pf_src_node      *psu_src_nodes;
            } psn_u;
    #define psn_buf         psn_u.psu_buf
    #define psn_src_nodes   psn_u.psu_src_nodes
    };
    

    Get the list of source nodes kept by sticky addresses and source tracking. The ioctl must be called once with psn_len set to 0. If the ioctl returns without error, psn_len will be set to the size of the buffer required to hold all the pf_src_node structures held in the table. A buffer of this size should then be allocated, and a pointer to this buffer placed in psn_buf The ioctl must then be called again to fill this buffer with the actual source node data. After that call, psn_len will be set to the length of the buffer actually used.

    DIOCCLRSRCNODES
    Clear the tree of source tracking nodes.
    DIOCIGETIFACES Fa struct pfioc_iface *io
    Get the list of interfaces and interface drivers known to . All the ioctls that manipulate interfaces use the same structure described below:
    struct pfioc_iface {
            char                     pfiio_name[IFNAMSIZ];
            void                    *pfiio_buffer;
            int                      pfiio_esize;
            int                      pfiio_size;
            int                      pfiio_nzero;
            int                      pfiio_flags;
    };
    

    If not empty, pfiio_name can be used to restrict the search to a specific interface or driver. pfiio_buffer[pfiio_size] is the user-supplied buffer for returning the data. On entry, pfiio_size contains the number of Vt pfi_kif entries that can fit into the buffer. The kernel will replace this value by the real number of entries it wants to return. pfiio_esize should be set to sizeof(struct pfi_kif)

    The data is returned in the Vt pfi_kif structure described below:

    struct pfi_kif {
            RB_ENTRY(pfi_kif)                pfik_tree;
            char                             pfik_name[IFNAMSIZ];
            u_int64_t                        pfik_packets[2][2][2];
            u_int64_t                        pfik_bytes[2][2][2];
            u_int32_t                        pfik_tzero;
            int                              pfik_flags;
            struct pf_state_tree_lan_ext     pfik_lan_ext;
            struct pf_state_tree_ext_gwy     pfik_ext_gwy;
            TAILQ_ENTRY(pfi_kif)             pfik_w_states;
            void                            *pfik_ah_cookie;
            struct ifnet                    *pfik_ifp;
            struct ifg_group                *pfik_group;
            int                              pfik_states;
            int                              pfik_rules;
            TAILQ_HEAD(, pfi_dynaddr)        pfik_dynaddrs;
    };
    
    DIOCSETIFFLAG Fa struct pfioc_iface *io
    Set the user setable flags (described above) of the internal interface description. The filtering process is the same as for DIOCIGETIFACES
    #define PFI_IFLAG_SKIP          0x0100  /* skip filtering on interface */
    
    DIOCCLRIFFLAG Fa struct pfioc_iface *io
    Works as DIOCSETIFFLAG above but clears the flags.

     

    FILES

    /dev/pf
    packet filtering device.

     

    EXAMPLES

    The following example demonstrates how to use the DIOCNATLOOK command to find the internal host/port of a NATed connection:
    #include <sys/types.h>
    #include <sys/socket.h>
    #include <sys/ioctl.h>
    #include <sys/fcntl.h>
    #include <net/if.h>
    #include <netinet/in.h>
    #include <net/pfvar.h>
    #include <err.h>
    #include <stdio.h>
    #include <stdlib.h>
    
    u_int32_t
    read_address(const char *s)
    {
            int a, b, c, d;
    
            sscanf(s, "%i.%i.%i.%i", &a, &b, &c, &d);
            return htonl(a << 24 | b << 16 | c << 8 | d);
    }
    
    void
    print_address(u_int32_t a)
    {
            a = ntohl(a);
            printf("%d.%d.%d.%d", a >> 24 & 255, a >> 16 & 255,
                a >> 8 & 255, a & 255);
    }
    
    int
    main(int argc, char *argv[])
    {
            struct pfioc_natlook nl;
            int dev;
    
            if (argc != 5) {
                    printf("%s <gwy addr> <gwy port> <ext addr> <ext port>\n",
                        argv[0]);
                    return 1;
            }
    
            dev = open("/dev/pf", O_RDWR);
            if (dev == -1)
                    err(1, "open(\"/dev/pf\") failed");
    
            memset(&nl, 0, sizeof(struct pfioc_natlook));
            nl.saddr.v4.s_addr      = read_address(argv[1]);
            nl.sport                = htons(atoi(argv[2]));
            nl.daddr.v4.s_addr      = read_address(argv[3]);
            nl.dport                = htons(atoi(argv[4]));
            nl.af                   = AF_INET;
            nl.proto                = IPPROTO_TCP;
            nl.direction            = PF_IN;
    
            if (ioctl(dev, DIOCNATLOOK, &nl))
                    err(1, "DIOCNATLOOK");
    
            printf("internal host ");
            print_address(nl.rsaddr.v4.s_addr);
            printf(":%u\n", ntohs(nl.rsport));
            return 0;
    }
    
     

    SEE ALSO

    ioctl(2), altq(4), if_bridge4, pflog(4), pfsync(4), pfctl(8), altq(9)  

    HISTORY

    The packet filtering mechanism first appeared in Ox 3.0 .


     

    Index

    NAME
    SYNOPSIS
    DESCRIPTION
    IOCTL INTERFACE
    FILES
    EXAMPLES
    SEE ALSO
    HISTORY


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру